Forms :: Command Button - Form Opens To New Record But Not Specific One
Jul 2, 2013
I have a form that opens from a different form based on the primary key within the original form. Unfortunately it seems to be opening a new record every time I open the form--not only from the original form but also straight from the sidebar.
The command button that opens the second form from the first uses the following VBA:
DoCmd.OpenForm "ZooMobile Incomplete Booking-Return Client", , , "[Event_ID] = " & Me.EventID
This exact coding worded perfectly in a similar set of forms that I had created; the only difference is a change in the form name & primary key field.
Add onto this, I think that the code DOES work, but then it immediately opens another new record. When I open the second form from the command button, then change to Design View, the form's Filter property is set to [Event_ID]=X (where X is the proper key from the first form) and Filter On Load is set to Yes. The X in the Filter changes accordingly when it changes in the first form. Also, every time I open the form a new record is added to the underlying table.
I've tried setting "Allow Additions" in the second form to No, but then when I open the form nothing appears. Literally; the entire form is blank, no labels, textboxes, combos, buttons or anything. When going to Design View it's still all there.
I've also checked the On_Load, On_Current & Form_Current events and found nothing. I even deleted them and the problem still occurred.
View Replies
ADVERTISEMENT
Apr 18, 2013
I need to open a specific pdf file per record by using a command button. The pdf files will all reside in a specific folder in a partition on my hard drive. Each pdf file will have a unique four digit file name e.g 1234.pdf.The file name will match a unique number allocated to each record. This number is generated by adding 1000 to the record ID.Record 10 will therefore have an associated pdf file name of 1010.pdf.I have created a text box field , named 'TestReportID', to capture the unique four digit number per record that I assume is needed to be referred to when setting up the code to find and display the correct related pdf file.
I have set up a command button on the records form and as simple test using the hyperlink address to the folder where the pdf files reside, I can open a pdf file by clicking on the command button but it does not matter what record is open when I click the command button, it will always open the same pdf file.If I don't identify a specific file name in the hyperlink address, when I click on the button it will display a file open dialog which lists all the relevant pdf files and I can then select and open the required file.I would like to cut out that step and get the correct file to open when I click the button.
View 2 Replies
View Related
Oct 6, 2004
Hi All,
I have a form called "frmProducts" which is linking to table "tblproducts".
Easy Enough...
The form shows all the Products information (fields).
I have a "More Info" command button (cmdMoreInfo) next to every record in the form.
When the command button is clicked I would like it to open up another form "frmMoreInfo".
But On frmMoreInfo I would only like it to show that specific product.
I have tried the following code on the on click event on the command button but it was always asking me for the value of Form![frmMoreInfo]![txtInternalCode]
Code:Private Sub Command12_Click()On Error GoTo Err_Command12_ClickDim stDocName As StringDim stLinkCriteria As StringstDocName = "frmMoreInfo" stLinkCriteria = "Form![frmMoreInfo]![txtInternalCode]=" & Me![txtInternalCode]DoCmd.OpenForm stDocName, , , stLinkCriteriaExit_Command12_Click:Exit SubErr_Command12_Click:MsgBox Err.DescriptionResume Exit_Command12_Click End Sub
Any Ideas?
View 4 Replies
View Related
Jul 30, 2014
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA"
id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR"
id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
1)
DoCmd.OpenForm "GASTOS_EDITAR", acNormal, , "[editar_id] = " & Me.Gastid
2)
DoCmd.OpenForm "GASTOS_EDITAR", , , "[editar_id]=" & Me.Gastid
3)
stLinkCriteria = "[editar_id]=" & Me![Gastid]
DoCmd.OpenForm "GASTOS_EDITAR", , , stLinkCriteria
4)
Private Sub btn_editgs_Click()
On Error GoTo btn_editgs_Click_Err
Dim strWhere As String
strWhere = "[editar_id] = " & Me.Gastid
DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere
btn_editgs_Click_Exit:
Exit Sub
btn_editgs_Click_Err:
MsgBox Error$
Resume btn_editgs_Click_Exit
End Sub
View 9 Replies
View Related
Apr 3, 2014
Access 2010. I have a form pulling from a query to create a "To Do' list of sorts. On this form is a button to open an input form for the corresponding record (I hope). When this button is used I want it to pull certain data for that specific line from the query and input it into the new record opened by the button. I know this is possible as I use another db that does this but I have not been able to figure out how to make it work in the new db.
View 14 Replies
View Related
Jan 11, 2015
I would like to create a form that allows me to search for a folder on my desk top, then once located i can transfer that file to a specific location on another drive, Similar to the Browse / upload function you see on many applications.I am using Access 2003. Is this possible??
View 5 Replies
View Related
Aug 25, 2011
I have a subform in which I want to put in a Command Button to open another form.
I used the wizard as per normal, but when you come to matching specific data fields, there is nothing in my left hand column of the sub form. I have checked the record source property and it is bound to the correct table.
I have read that this is an issue with Access 2007? Is this the case or am I missing something obvious here?
View 3 Replies
View Related
Aug 24, 2014
I open a form (EntryBasic) for users to enter data in, which is then saved to the only table in the database (MasterTable). The form (EntryBasic) has a list box with four choices: red, white, blue, orange. The button that opens the form is placed on another form (MainForm) The form (EntryBasic) record source is MasterTable.
A user is on the MainForm and needs to add a new record related to red. When user clicks on the button (NewRedEntry), I need the form to open and the list box pre-selected to red.
Is there a macro or VBA code that might simply execute this action, preferably something that can be attached to the NewRedEntry button?Even better, if there are two list boxes, code such code be applied to same NewRedEntry button, where both list box values are pre-selcted with the click of this button?
View 5 Replies
View Related
Sep 30, 2014
I have a form named CORRES_TYP with 3 text boxes and a list box. I also have a separate table with 3 field from where the information I put in the form was saved.
In my form whenever I put information on the textbox at hit add record button, these information are saved in my table and will reflect on the listbox on my form below the textboxes. Also if I select a record in the Listbox the record I selected will apprear on the corresponding textbox in the same form.
My problem is that I have been trying to create a command button that will save and change the existing record everytime I select an item in the list box and modify the information through the textbox. Here are some infromation about my table and form:
Table name = CORRES_TYP
Field 1 = CODE (Primary key, No Duplicates)
Field 2 = DESCRIPTION
Field 3 = FOLDER
Form name = CORRES_TYP
Textbox 1 = CODE
Textbox 2 = DESCRIPTION
Textbox 3 = FOLDER
Listbox name = LIST14
View 9 Replies
View Related
Jan 15, 2014
I have created Command buttons on forms with VBA code. Records GoTo previous and GoTo Next Record so both of working is good. But Next Record command is force to a new record. If suppose when we clicking on last record. It is go to new record without any message. So No need to force a new record with Next Record Command. Only just move to next record if there is no records show a message. Below mentioned both VBA codes so there is any changes on GoTo Next Record Code?
VBA Code:
Go To Previous Record : DoCmd.GoToRecord , , acPrevious
Go To Next Record : DoCmd.GoToRecord , , acNext
View 4 Replies
View Related
Nov 5, 2013
I am designing a database to manage hospital patient data. I will have to enter info at various points, e.g. when a patient is referred, admitted, discharged...
So for example, I have a main form with the patient's name and two subforms, one with the referral details (e.g. date, name of referrer...), and one with the admission details (e.g. date, diagnosis). They are linked through Parent-child links to the main form by PatientID. So, when I enter a new PatientID in the main form, the ID in the subforms is automatically added/synchronized.
However, I would like it not to be...since not all patients that are referred are then admitted. Therefore I would like to have a command button in the main Form that allows me to control when a new patient record is added to the admission subform. In other words, I would like an "Add a new Record in the admissions subform" button, which then creates a new record, with matching PatientID in the admissions subform (and in the related table). Is this possible???
I have tried using the command button wizard but it either requires a record to be already present in the subform, or it takes me to the first record of the form, and not the matching PatientID one.
View 7 Replies
View Related
Jan 13, 2014
I've rebooted my copy record button and just used the macro wizard for now, it seems to work as far as I can tell but there is something strange about it.
I've added in some text boxes so I've got some confirmation, but when I click this copy button I get the following error;
"The command or action 'RecordsGoToNew' isn't available now."
View 1 Replies
View Related
Jun 28, 2013
I want to recall a record by it's primary key in a form with a command button
I mean write a primary key in a textbox and press the button then it shows the record.
View 3 Replies
View Related
Dec 3, 2014
I currently have a command button to run the following...
DoCmd.OpenQuery "Credit Card Report", , acAdd
Which is an appended query.
However, I don't want it to add the whole table each time this is pushed but when trying to use...
DoCmd.RunSQL "INSERT INTO [Credit Cards] ([Provider's Name], [Patient Name], [Patient Account Number] ... VALUES ([Provider's Name.Value], [Patient Account Number.Value], [Patient Account Number.Value]"
It doesn't want to add the single record and gives me an error. I'm pretty sure my syntax is wrong but not sure how to correct it.
The fields I want added are ... Provider's Name , Patient Name, Patient Account Number...
View 1 Replies
View Related
Aug 1, 2013
What to do, I have a form that will reset online user of my system the field is yes or no type boolean and i using combo box that will show only online people but my problem is how to reset the yes to no when i choose from the combo box a username I want to logout. I use command button also.
View 1 Replies
View Related
Sep 17, 2013
I have a form which displays some product details and a stock level. The subform below it allows entry of a quantity to issue and a control button to run a small macro, write a movement record to a stock movement table and then close the form. This works fine.
But the user can also cause the movement record to be written just by keying in a quantity and tabbing out. If this is done several times it writes several movement records and doesn't close the form. I want to ensure that record is only written when the command button is pressed.
Perhaps there is a more conventional or better way of achieving what I want but I can't think of it.
View 2 Replies
View Related
Dec 19, 2013
Is there a way to disable my print report button if the user has not hit the save button ???? and maybe display a msg box?
attached a snippit of my form.
View 5 Replies
View Related
Apr 2, 2015
I'm using a navigation control to switch between forms. In one of those forms, I have a continuous subform which is a list of Projects (source is a query) that is read-only. To edit a project, I can click on its name, which switches the form displayed in the navigation control via docmd.BrowseTo (with acEditForm as the last parameter). This works fine. The proper form opens, with the proper project being displayed.
Now, on this second form, I have on the right the list of tasks contained in the project in a continuous subform (source is a query), and on the left another subform which is kind of an "edit bar" that I use to actually edit the individual tasks. So, when I click on a task in the task list, the OnCurrent event triggers a docmd.BrowseTo command that updates the "edit bar" subform and passes the ID of the task as the WhereCondition parameter. This updates the values displayed in the Edit Bar to that of the selected task, which I can then edit.
Now here's the thing: depending on the project I open, the Edit Bar doesn't work. Actually, it looks like only one of the projects is working, while the others are not (and I managed to have a different project working, but only one works at any given try). When it doesn't work, the Edit Bar is in "NewRecord = True" for some reason. All the other properties of that subform seem to be the same between when it works and when it doesn't.
So, it looks like the same command (docmd.BrowseTo with acEditForm) opens the subform properly in acEditMode when it works, and in something else when it doesn't, depending on the parent record that's being opened.
This really gets me, I really can't figure out how that's even possible.
I suspect it might have something to do with locked records, maybe?
View 2 Replies
View Related
Nov 7, 2005
I have a User Main Menu as seen below with the command buttons for New Work Log Entry and Edit Work Log Entry. The New Work Log entry opens a blank Work Log as shown below. The Work Log form's record source is tblWorkLog. The user will fill out all the fields except the End Page and Total Worked Pages. The user will then exit out of the database. When ready to enter the total worked pages the user log back in to the db and will click on the Edit Work Log Entry.
This is supposed to open up the last entry the current user was working on so that he or she can enter the End Page and Total Worked Pages
Currently it is opening up the last entry of the table even if it was a different user's.
How can I change this? I need it where it opens up the last record for that person. There are going to be 50 users so I can't have it open up to the last record of the table.
Any help will be apppreciated.
http://img.photobucket.com/albums/v332/youmnac/UserMenu.jpg
http://img.photobucket.com/albums/v332/youmnac/WorkLog.jpg
View 2 Replies
View Related
May 6, 2015
I've recently decided to move a database that had all its information on 1 table and divided it into multiple tables.
Attached is the relationship as well as the form.
The issue I have is that when I click the form, it only shows a blank record with none of previous records.
Data entry is already set to NO. I'm wondering if it's an issue with my relationships, tblStudioDescription is the parent table and the others are child tables so I linked them with the ID and set referential integrity.
View 7 Replies
View Related
Jul 23, 2013
I want to hyperlink from a query direct to the relevant record in a specific form. I have a hyperlink field in the form which shows up in the query. When clicked in the query, this hyperlinks to the form but I cannot make it select the correct record in the form.How do I get it to select the correct record?
View 3 Replies
View Related
Jul 20, 2014
I am trying to create a command button that sits on the order details page and that will open up a report i have created called 'picklist' which is basically the same as an invoice but with some different product information listed on it.
I want the command button to open up the picklist that corresponds to the order that i am on e.g picklist #2 for invoice#2
1) I have seen this code on the internet -
DoCmd.OpenForm "SecondFormName", , , "FieldName = #" & Me.ControlName & "#"
Would this work for me if i was to modidy it to:
DoCmd.OpenForm "PickList", , , "InvoiceID = #" & Me.[txtID] & "#"
2) Where do i input this code? If i click on the 'onclick' in the properties form im presented with this page (attachment):
View 6 Replies
View Related
Jul 20, 2014
How to modify an existing database template to meet my needs.
I am trying to create a command button that sits on the order details page and that will open up a report i have created called 'picklist' which is basically the same as an invoice but with some different product information listed on it.
I want the command button to open up the picklist that corresponds to the order that i am on e.g picklist #2 for invoice#2
I have 2 issues/questions:
1) I have seen this code on the internet -
DoCmd.OpenForm "SecondFormName", , , "FieldName = #" & Me.ControlName & "#"
Would this work for me if i was to modidy it to:
DoCmd.OpenForm "PickList", , , "InvoiceID = #" & Me.[txtID] & "#"
2) Where do i input this code? If i click on the 'onclick' in the properties form I am presented with this page (attachment):
View 8 Replies
View Related
Nov 12, 2014
I need to return a folders directory to a text box on my forms record called Files_Directory when i click the Browse command button... The folder will have more folders within it along with documents all relivant to the folder selected, hense the need for just the folder directory rather than a file.
View 12 Replies
View Related
Mar 19, 2012
I haven't used access before and have been set the task to create a data of photos. The table is called 'Find a Photo' and contains 6 catergories of various information including river, site and date. I would like to create a search/command button by which i can type the river, site and date into seperate text boxes and search all of them at the same time.I don't know how to connect a command button to command button and not sure if any macros/queries are needed. Hope all this aint to hard to do.
View 1 Replies
View Related
Dec 5, 2013
I have a couple of command buttons on a form. They have embedded bitmaps as pictures with a caption below. For some reason when the forms loads (and also in design view), there is a narrow white outline / border around them. As if the button is drawn on a slightly larger white square?This border disappears as soon as I hover over the button (in form view) or click on the button (in design view).
View 3 Replies
View Related
