I am working with an already intact database along with a form. One of the buttions in the form, when pressed, prints two copies of a P.O. One copy says original on the bottom and the other says PX Copy and my boss wants the PX Copy to stop printing. How do I get it to stop?
View RepliesI have two command add buttons on my form that go to two separate tables. I also have a go to next record button as well. Is there a way that I can put all three commands under one command button? They are already coded in VBA and all work properly individually, I just want to make it smoother if possible ..
View 3 Replies View RelatedI am rewriting an old Access 2003 database in Access 2010. When creating new command buttons, the current theme gives them a default appearance. I need to apply this appearance to old command buttons. I know there is a way to select the default button and apply its properties to others quickly. I have done it before but didn't write the process down .
View 2 Replies View RelatedI have a database that is uses a job number as the primary key, on a form that has been querried from this key to have a single button to print the report, from the number that is held in the txtbox would I have to create this in the on click properties and if so please help!
Regards
I have created a web-database (? - There are globes over all the forms and tables icons) based on the Issues & Tasks template. This means that most of the data is entered and seen on the "Main" form, which has two tabs - Open Issues and Closed Issues. I have created a form that allows people at my work to input the necessary data and save it, so that it will show up on one of the two tabs. However, once a record has been created, I want to be initially locked if the ID/PK is clicked, so that data can't be changed or entered inadvertently.
SO, I changed the code so that when the ID/PK for a record is clicked, it brings up a different form, but one that looks exactly like the one that is brought up when entering a new form, but I locked all of the fields so that the information cannot be changed. It seems from what I have read that I can create a button on this form so that when clicked, it unlocks the fields on the form so that they can be changed, and then when clicked again it will lock the fields again. Is this true? If so, how can I do it? Or is there something similar I can do? I have seen codes that I could copy and paste, but I cannot figure out the place to copy and paste codes in Access 2010.
I have changed the Form properties so that Data Entry and all the "Allows" are set to No...
I am trying to print 5 copies of the report via the button on the form.
I'm sure I have the code correct, however I only prints 1 copy instead of 5.
I want to open a new form with information related to the main form.
The code I've used is:
Private Sub GoToContacts_Click()
On Error GoTo Err_GoToContacts_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "Contacts"
stLinkCriteria = "[Outside Rep]=" & Me![Outside Rep]
DoCmd.OpenForm stDocName, , , stLinkCriteria
Exit_GoToContacts_Click:
Exit Sub
Err_GoToContacts_Click:
MsgBox Err.Description
Resume Exit_GoToContacts_Click
End Sub
When I use the button I get an error message for a "Syntax error (missing operator) in query expression.
Any suggestions?
Judy Hewitt
Alright I give up. I searched the forums and read up but still not grasping it. I know I've done something like this before but my brain must be dead today.
So I have 4 important tables. I have a main one and 3 tables that have records related to the main one. They're all the "many" sides of the one to many relationship with the main table. Outline is below:
Main Table:
EMP_ID (Primary key)
...and other fields
Employment Table:
HIRE_ID (Primary key)
EMP_ID (for relationship)
...and other fields
Insurance Table:
INS_ID (Primary key)
EMP_ID (for relationship)
...and other fields
Skill Table:
SKILL_ID (Primary key)
EMP_ID (for relationship)
...and other fields
So basically what I'm looking for is to have a main form pop up that has the Main table information (employee info). Then on that form I want 3 command buttons, each one going to a new form that relates to the three tables above and is relative to the Main table. Each employee may have several hire/fire listings, insurance listings (if they change their insurance), and skill ratings (updated as they improve). When I have set all my relationships so that the EMP_ID on the Main table has a one to many relationship with all the EMP_IDs on the other tables. When I create the command buttons though and start to populate a record in one of the three "subforms" the EMP_ID is not populating to be the same as the EMP_ID from the main page thus making me unable to create a record because it doesn't recognize a related record.
What the heck am I doing wrong
Working on a form and when using the wizard to add a command button or a txt box the wizard gives it a funny name like command989. Im wondering why? Where does this default come from and why is the number so high? There is no way anywhere near that number of command buttons on this form.
View 4 Replies View RelatedI have a form with command buttons that run different macro's that downloads queries into Excel.
What i would like to do if it is possible, is to somehow add an explanation of what the download will contain if the user should either hover over the button or even better if there was a way of adding ? box to the button so that the user could click on the ? and get a description of what will be downloaded.
I do have a very brief description on the button stating what it does but I would like to give the user a more detailed description of what is in the download.
Ok so the Data I have holds a hyperlink to a file this field is "basepath".In Form view I want to have a command button that reads the basepath (for that record) then opens said hyper link.
View 3 Replies View RelatedCode:
Private Sub Command124_Click()
On Error GoTo Err_Command124_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "PRINTSQUARE 1"
DoCmd.OpenForm stDocName, 3, , , , 4
Exit_Command124_Click:
Exit Sub
Err_Command124_Click:
MsgBox Err.Description
Resume Exit_Command124_Click
End Sub
An command button would open a form to display some query result, and how could I do something after user exit that form!! I have tried to put some action afater the Docmd and EXIT_COMMAND124_CLICK:, both didn't work!!
I currently have a form for a handover process and am looking to have a button to ideally take a section of inputted information from the form and place this into an email.
IncidentReferenceNumberName1
DescriptionSignificant1
ActionTakenSignificant1
CurrentStatusSignificant1
TimeLoggedSignificant1
TimeResolvedSignificant1
NumberofcallsreceivedSignificant1
Are my fields, this goes up to 4.
I want to copy all these fields from my form, ideally into a new email but if not possible then atleast just to clipboard, is there any way to do this?
I have a form named CORRES_TYP with 3 text boxes and a list box. I also have a separate table with 3 field from where the information I put in the form was saved.
In my form whenever I put information on the textbox at hit add record button, these information are saved in my table and will reflect on the listbox on my form below the textboxes. Also if I select a record in the Listbox the record I selected will apprear on the corresponding textbox in the same form.
My problem is that I have been trying to create a command button that will save and change the existing record everytime I select an item in the list box and modify the information through the textbox. Here are some infromation about my table and form:
Table name = CORRES_TYP
Field 1 = CODE (Primary key, No Duplicates)
Field 2 = DESCRIPTION
Field 3 = FOLDER
Form name = CORRES_TYP
Textbox 1 = CODE
Textbox 2 = DESCRIPTION
Textbox 3 = FOLDER
Listbox name = LIST14
I have created Command buttons on forms with VBA code. Records GoTo previous and GoTo Next Record so both of working is good. But Next Record command is force to a new record. If suppose when we clicking on last record. It is go to new record without any message. So No need to force a new record with Next Record Command. Only just move to next record if there is no records show a message. Below mentioned both VBA codes so there is any changes on GoTo Next Record Code?
VBA Code:
Go To Previous Record : DoCmd.GoToRecord , , acPrevious
Go To Next Record : DoCmd.GoToRecord , , acNext
I am designing a database to manage hospital patient data. I will have to enter info at various points, e.g. when a patient is referred, admitted, discharged...
So for example, I have a main form with the patient's name and two subforms, one with the referral details (e.g. date, name of referrer...), and one with the admission details (e.g. date, diagnosis). They are linked through Parent-child links to the main form by PatientID. So, when I enter a new PatientID in the main form, the ID in the subforms is automatically added/synchronized.
However, I would like it not to be...since not all patients that are referred are then admitted. Therefore I would like to have a command button in the main Form that allows me to control when a new patient record is added to the admission subform. In other words, I would like an "Add a new Record in the admissions subform" button, which then creates a new record, with matching PatientID in the admissions subform (and in the related table). Is this possible???
I have tried using the command button wizard but it either requires a record to be already present in the subform, or it takes me to the first record of the form, and not the matching PatientID one.
I have a form with three text boxes and one command button
I want to hide the command button from view until at least one of the boxes has data in it. I also want the command button to return to hidden if the data is removed
So far I have tried this on the after update event on one zof the text boxeswith absolutely no success.
Code:
If Me.txtFirstName = "" And Me.txtLastName = "" And Me.txtSocialInsuranceNumber = "" Then
Me.cmdAddNewClient.Visible = False
Else
Me.cmdAddNewClient.Visible = True
End If
Is there a way to get a string from a field and use it to set the caption value for a command button at run time?
View 2 Replies View RelatedI would like to open a PDF document using a button control on a form to a file path listed in a field on the form (Me.Link). I am trying to use the followHyperlink code but I keep getting the runtime 490 error.
This is the code im using:
Dim strFilePath As String
strFilePath = Me.Link
Application.FollowHyperlink (strFilePath)
If I put a filepath to one of the pdf documents in the place of (strFilePath) it opens that pdf document fine but not when I declare a filepath based on the one listed on the form.
I'm using option group with value 1 and value 2 with a command button to open two different forms. This is the code:
Code:
Private Sub Command9_Click()
Dim strForm As String
Select Case Me.Cornice0
Case Is = 1
[Code] ....
I would like to close form's option group once clicked the command button after the opening of the requested value form. I tried Docmd.close but all I get is the option group no more working.
I have a button placed on a form, but it is only clickable a few pixels along the bottom of the button. If you hover anywhere above this, the button is not clickable and does not highlight as if it is clickable.
I have deleted the offended button and recreated it, but the same strange behavior occurs?
If I move the button up a few pixels or more, then the clickable area shifts to the top of the button and the bottom becomes unclickable.
The buttons are in the header of the form and is completely visible when the form is in normal form view. I also can not see anything that could be sitting ontop of the button (no transparent controls or anything) that could be obscuring it.
I have a simple query that can edit the main table. I built a form around that simple query. When you open the form: it asks for a name & then a date to be edited. All works. I have a save command button and a close command button. All is good.
I would like a “red explanation point” command button instead of it just being on the toolbar. When I click on the “red explanation point” on the toolbar, it asks for a name and date again. Whereas, none of the commands I used in the wizard worked like that.
I've rebooted my copy record button and just used the macro wizard for now, it seems to work as far as I can tell but there is something strange about it.
I've added in some text boxes so I've got some confirmation, but when I click this copy button I get the following error;
"The command or action 'RecordsGoToNew' isn't available now."
I want to recall a record by it's primary key in a form with a command button
I mean write a primary key in a textbox and press the button then it shows the record.
I created a command button from using the wizard so when I click to delete the record the button is for, a window pops up asking if I am sure I want to delete the record. Is there a way to not have the button pop up?
Here is the code:
Private Sub cmdCompleted_Click()
On Error GoTo Err_cmdCompleted_Click
DoCmd.RunCommand acCmdSelectRecord
DoCmd.RunCommand acCmdDeleteRecord
Exit_cmdCompleted_Click:
Exit Sub
Err_cmdCompleted_Click:
MsgBox Err.Description
Resume Exit_cmdCompleted_Click
End Sub
I currently have a command button to run the following...
DoCmd.OpenQuery "Credit Card Report", , acAdd
Which is an appended query.
However, I don't want it to add the whole table each time this is pushed but when trying to use...
DoCmd.RunSQL "INSERT INTO [Credit Cards] ([Provider's Name], [Patient Name], [Patient Account Number] ... VALUES ([Provider's Name.Value], [Patient Account Number.Value], [Patient Account Number.Value]"
It doesn't want to add the single record and gives me an error. I'm pretty sure my syntax is wrong but not sure how to correct it.
The fields I want added are ... Provider's Name , Patient Name, Patient Account Number...