I have a query that I want to concatenate some of the results onto a single row, but I'm having trouble.I've followed Allen Browne's example, but when I run the query, I either get the #Type, #Name or a 3201 error (I believe, I can't recreate it now).
View RepliesHello,
i am trying to join the results of a many-side of a query into one result field separated by commas...
Table: tblWorkOrderStoresFinal
Row 1: LogNumber: 1StoreNumber: 2
Row 2: LogNumber: 1StoreNumber: 3
Row 3: LogNumber: 1StoreNumber: 4
I would like to make a query that combines the StoreNumber into one field CombineStoreNumbers separated by commas as follows...
LogNumber: 1 CombineStoreNumbers: 2, 3, 4
I tried the following crosstab query, but it's not quite right.
TRANSFORM StoreNumber
SELECT LogNumber
FROM tblWorkOrderStoresFinal
WHERE (((LogNumber)=1))
GROUP BY LogNumber
PIVOT StoreNumber;
Any ideas? Hope this makes sense.
Thanks, Casey
I saw the following code on the forums...
Dim i As Integer, c As String
With Me.ListBox.Column(0)
For i = 0 To Me.ListBox.ListCount - 1
c = c & Me.ListBox.ItemData(i) & ", "
Next
End With
c = Left(c, Len(c) - 2)
This works great!! Now I am trying to concatenate the column 3 of the listbox.
Tried to use the code below (pointing to the second column) but it always returns the first column data.
'Dim i As Integer, d As String
With Me.ListBox.Column(2)
For i = 0 To Me.ListBox.ListCount - 1
d = d & Me.ListBox.ItemData(i) & ", "
Next
End With
d = Left(d, Len(d) - 2)
ItemData does not allow pointing to my 3 column of the listbox.
So i have a combo box that has a criteria set for the query. I have a search button that runs the query that users click.
What i need to happened is i want the results displayed in the sub form the when query is ran.
I am trying to allow end-users to only use buttons to navigate and display records in my database (so they don't know access is in the background) I have query that runs when they press a button but after they run it there is no way to get back to the main interface screen i.e. there is not a place to put another button and close the query. I was looking into creating a form to display the query results in datasheet view but it is not appearing the way I want. I inserted a subform and the results got better but I also do not like the way it displays because the user can see the subform, simple solution to get my data to display in the form so a user can view the results similar to datasheet view?
View 3 Replies View RelatedI have a Query, which is running on 2 tables and when I run the query I am getting the results like this.
Name----------Position
Rock----------1
Rock----------2
I want the Results like
Name----------Position----------Position
Rock----------1 ---------- 2
Is there any way to do this.
Essentially I have a table for rooms around my school and what the rooms contain. Most of the details for the rooms are Boolean (e.g. If the room has a projector, Yes/No).
So what I am trying to do is have a form where i can select a checkbox(s) and if i tick one, a query that holds all the room details will only show rooms with projectors in them, which i can then display those results in another form.
My question is how do I get the check boxes in the form to narrow down the room results to only show the ones with the criteria i have selected in the form?
In my form I have a dropdown box. There are 7 values and based on the value it will run that query in sql server. I would like to have the query open in the form instead of opening up on a different tab. Currently on the command button click there are a bunch of if statements depending on what is selected on the combo box. Each value has a query associated with it because there are 7 different sql server DB's. The code is slightly different with each query.
View 2 Replies View RelatedI have a basic DB for recording supplier records, you enter a supplier ID and it performs Dlookups to run and display query results on the same form. That part works fine.
I've added a subform and linked it to an existing query which returns the suppliers top selling lines and the query picks up the supplier from the ID field on the main form, however when I enter a new id the subform doesn't update with the results specific to that supplier.
So I think I need a way of getting the subform to re-run the query each time I update the supplier ID field, but I can't see an option for this in the subform properties.
I got a database that has a multitab control. In the first tab there is the data and second one is a search tool. It contains a field where to type the text to be searched and a listbox where the results should show up.So far I only managed to create the query and link it to the field (textbox) where the user puts the search word. I just have no clue how to display the results on the listbox once the text is entered and the button pressed.
View 8 Replies View RelatedI have a form that displays multiple records in datasheet view. I want to query off of that form and return all results for all records being displayed. However, I'm not sure how to tell Access to do this. Access instead wants to return records for only the first displayed record in the form or the record that is highlighted by the cursor.
In the attached image you can see a list of AccountingUnits (AU) going down. My query using AU from the form as criteria will only return records for AU 114510 since it is the first record, but I would like to see records for all AU's being displayed by the form. How can I do this?
I am fairly new to access, but do have some experience with SQL & PHP.
I am trying to do something which I would have thought was quite straight forward. But I keep hitting a brick wall and all I get is #name? error on my form.
I have a table "tbl_Job_Spec" and a table "tbl_Tool_List".
I would like to have on the form for tbl_Job_Spec a drop down for selecting the tool number from the "tbl_Tool_List", which then automatically puts into a text box on the form the tools location, which is stored alongside the Tool Number Field on tbl_Tool_List.
I've tried loads of things, I have a query setup ("qry_tool1loc") which seems to correctley identify the relevant information, but when I try to reference that query on the form if just comes up with #Name? in the box on the form.
Anybody got any ideas? I'm only at an early stage in what is quite a big project, but to be honest this is about as complicated as it's going to get, so once I can get past this hurdle it should be plain sailing!!!!!
My Form is taking its results from a parameter query, and since my subform also has the same control source (the query).
It always prompts me twice, although not a major problem it is irritating!
Is there any way that when I type the search results once the sub form takes the results from the main form?
(P.S. The form asks me for parameters even when printing and saving, is there not a way that this can be stopped too by maybe taking the results off the current page?)
I have a main form (start_protocol) with an unbound subform (placeholderform).
Using a button in mainform I open a search form (search_protocol) inside the unbound form, by the code:
-------------------------------------------------------------------
[placeholderform1].Visible = False
[placeholderform].Visible = True
Me.placeholderform.SourceObject = "SEARCH_PROTOCOL"
--------------------------------------------------------------------
The search form (has a run query button) is build from a query named: search_protocol.
I want to be able, as soon as I pass the button, to have the results (from the query) inside the unbound subform, of the main form (Start_protocol).
Essentially I have a table for rooms around my school and what the rooms contain. Most of the details for the rooms are Boolean (e.g. If the room has a projector, Yes/No). So what im trying to do is have a form where i can select a checkbox(s) and if i tick one, a query that holds all the room details will only show rooms with projectors in them, which i can then display those results in another form.
My question is how do I get the check boxes in the form to narrow down the room results to only show the ones with the criteria i have selected in the form?
Basically, I originally wanted to create a form which I can input data into Access with by using a button (I was unable to get Access to append the information from the forms to the table, so it didn't work out!). I did not want the fields on the form to be linked to a table, as then a record (and most importantly an auto-number) is created as soon as somebody starts typing. Should somebody stop typing halfway through and quit the form an autonumber will have been generated, which makes the number of "users" seem higher than it actually is. I got around this by changing the field from autonumber to number and then creating a query that selects the maximum value of ID in the table, then adds 1 to it (which is essentially the lowest unique number. I tend to call this newID).
The problem I now have is setting this to be written to the table alongside the data from the form (the rest of the fields on the form are now connected to the table, as I am no longer using an autonumber). I have tried the following: Setting the form to run the expression "[ID] = [qryMaximumUserID]![NewID] " on load. This returns the error "The object doesn't contain the Automation object 'qryMaximumUserID.' Setting the control source of the text box to be dLookup. This fills the textbox with the correct value, but then it doesn't write it to the table! Setting the default value of the field to be 0, then running an update query to update any ID of 0 (criteria "0" to the value of newID "update to: [qryMaximumUserID].[NewID]. "). However this doesn't work as whenever the query is run it asks for a parameter to be entered, rather than just taking the value from the other query. Writing a macro that is run on load to SetValue of item:[ID] to expression: [Forms]![qryMaximumUserID]![NewID]. However this returns an error "Microsoft Access cannot find the referenced form 'qryMaximumUserID' you entered in the expression.
I'm trying to track daily production at a manufacturing company running many different processes at different locations each running multiple parallel "lines." The tricky part is that the number of lines running and the shift schedules e.g. 2shifts 10hrs/day 4days/week or 3shifts 8hrs/day 5days/week change frequently for each process.
Right now I have a form for process data that specifies the schedule and number of lines running each day. Then I'm running an append query to a "production" table that generates blank production records associated with each item made in each process for the correct shift/line combinations.
Up to now I've been manually changing the date on the append query each time I run it. Then I have a seperate query for each process that pulls out the production records for each day. My problem is that the preferred interface for production data entry is a spreadsheet with the following layout:
--------DAYS LINE 1 DAYS LINE 2 SWING LINE 1 SWING LINE 2
ITEM 1 100
ITEM 2 2250
ITEM 3
which changes each time the shift/line schedule changes for each process. The only way to achieve this layout I know of is a crosstab query which isn't updateable. Ideally, each day the manager will specify the shift schedules and forms will be automatically generated with the correct structure and sent to the process supervisors. I'm open to different form layouts and even redesigning the database completely.
I have got a form (name: SearchForm) that displays results of a query (name: AircraftSearch). It is a continuous form displaying multiple results of a search done by the query. I need to be able to send an e-mail to multiple recipients chosen from results displayed on the form.
One of the form's field (a text box called: EmailToOperator) is containing e-mail address to an aircraft operator selected by the underlying query. I need to be able to place a check box button (or something similar) that is going to select the e-mail address. The tricky part is to have multiple check boxes allocated for each record displayed on the form and have them working independently.
The second task is sending a one message (via Microsoft Outlook 2010) to chosen multiple recipients (with no attachments) having the recipients' addresses not visible to each other.
I have a totals query that shows results in a chart. It takes a parameter to limit results, by a combobox in a form.
Parameter in the query includes the OR "*" expression, in case someone wants to get the results unfiltered.
The Combobox in the form, has an AfteUpdate event that opens the chart (form) every time its value changes, by the [DoCmd.OpenForm "ChartForm" , acNormal] expression.
I don't know how to make it open the ChartForm when no parameter is selected in the combobox.
I created a search form. It has 6 unbound text boxes and 2 combo boxes in the header. Users can select values from the combo boxes and/or enter names in the other text boxes. These values all go into a filter on my Main table and the filtered results show up in the detail section. That used to work fine.
Now, I've been trying to convert the filter into a query and show the query results in the detail section instead.
(Why? Because of the ever-changing business requirements, of course!)
For some reason, the detail section went blank. All white. When I change the Data Entry property to No, it fixes that.
However, the text boxes for entering the search criteria will not accept any values anymore. It's like they are disabled.
When I change Data Entry property to Yes, I can enter text into the text boxes again. But the detail section blanks out again.
Windows 7 Professional, MS Access 2007/2010
I have a BE database, that when opened, opens a form for saving the results of a query to a text file on the desktop. It works fine, if the full path is entered.
The problem is, I want this saved on any users' desktop. I did some digging and found the %userprofile% variable, which when used, gives me the error.
I understand this should work in both Windows XP and Windows 7, which are the environments the full DB will operate in. So far the "EXPORT" button on the form has the following for the code:
Code:
Private Sub BTN_Export_Click()
DoCmd.TransferText acExportDelim, , "QRY_ExportPublicComment", "C:UsersMark N. McAllisterDesktopPubComExp.txt"
End Sub
When I tried this:
Code:
Private Sub BTN_Export_Click()
Dim strPath As String
strPath ="%userprofile%desktopPubComExp.txt"
DoCmd.TransferText acExportDelim, , "QRY_ExportPublicComment", strPath
End Sub
the error occurs.
I have a firstname field, and a surname field.
On a report I have a textbox that is bound to =[firstname] & " " & [surname]
This gives me an error. I have even tried single quotes, but no luck.
Please advise
Thank you in advance
Hi All:
, I have two fields to concatenate.
SKU = ps1-
Supp_sku = 98756
I want to have it like ps1-98756.
I have used the following query to test the result -
select sku & “ “ & supp_sku as [my_sku] from inventory_master;
The result is
My_sku = 198756
I do not get ps1-98756.
Could you please help?
Thanks - Prabir
G'day,
I want to produce some UPCa bar codes which require 11 digits of TEXT for the barcode function to work.
I want the bar code to be made up of several fields
Make 3 Chars (Text) (eg 021)
Model 3 Chars (Text) (eg 103)
Serial_Number 5 Characters (Numeric) (eg 00025)
(I need to keep the Serial_Number field numeric so that it increments in modulo 10 format (ie get Numeric only results))
So i need to produce a field that looks like this 02110300025 after the 3 fields are concatenated
However I am getting 02110325
I'm sure that the answer is simple but I seem to be having a mental block. Does anyone have any ideas? Your help will be very appreciated.
I am trying to create a basic query that adds four numbers, but when I try '[Mark1]+[Mark2]+[Mark3]+[Mark4]' it concatenates it instead of adding.
e.g. I have '58+96+13+45' and I get '58961345' instead of 212.
Hi folks,
New person to the forums here. I've had a scroll through the FAQs and can't see an answer to a problem I need to solve. I wonder if there's anyone could offer some help?
My db has three tables: table_a, table_b and table_c. Each table has the following fields:
table_a
a_id (PK)
a
table_b
b_id (PK)
b
table_c
c_id (PK)
a_id (FK (many to one))
b_id (FK (many to one))
c
I would like field c in table c to be a concatenation [table_a].[a]+"-"+[table_b].[b]. I'd like this field to automatically generate and be constrained as unique. Creation of value c in table_c should be by selection of value a & then value b in a form based on table_c.
Can anyone advise me how I do this?
By the way - editing to add this - I am using MS Access 2000 & can't upgrade to a later version.