Forms :: Copy Table In Currently Opened MDB File
Jan 8, 2014How can copy table from another mdb file in current opened mdb file? If copy table is exist in current file table will be replaced.
View Replies
ADVERTISEMENT
Access File Cant Be Opened
Mar 9, 2008I have Access 2000 at home, and 2003 at work.
I can still open my file at work, but the same file at home cant be opened. It keeps giving "microsoft access has encountered an error" etc.. send error report..
Any suggesstions?
Thanks!
How To Copy Value From Access Table To Excel File Without Losing Number?
Jul 27, 2007This forum is really helpful!
I am using following code to copy low value from Access table to excel file, but only to find that it changed in excel file. How should I do to not change that?
ThisWorkbook.Sheets("EV Data").Cells(row + 2, col + 2) = _
rs.Fields(col).Value
RecordIDDateTimeStampSetupIDStringBaseProductIDStringMGDBIDStringVAGLBIDStringPWDCohortIssueAge1IssueAge2NumberOfCellsNumberOfScenariosTotalWeightInitialPremiumEV_MeanEV_P995EV_P99EV_P95EV_P90EV_P75EV_P50EV_P25EV_P10PrEVGTZero
51907/27/2007 7:04:36 PMAccess2006Max72006MGIBAllCombinedAllCombinedAllCombined95010.006800000006810000009.33604218011769E-03-2.48487734766947E-02-2.35810657931309E-02-1.44083677074442E-02-1.10775676515645E-02-2.1878002261516E-037.92060932296671E-031.95193525290664E-023.06835072412068E-020.70658682634731
52007/27/2007 7:04:37 PMAccess2006Max7LifePayIAllCombinedAllCombinedAllCombined185010.005110000001.19424841908013E-02-1.67115163990304E-02-1.42187111112351E-02-8.08910871821918E-03-4.62961276311795E-032.72200376166994E-031.04312882683217E-022.06668892126601E-022.96649979111015E-020.80638722554891
52107/27/2007 7:04:37 PMAccess2006Max7NoneAllCombinedAllCombinedAllCombined95010.0054410000007.98908918707603E-03-1.67789382388317E-02-1.56490361783179E-02-1.07703746693193E-02-0.00753365556878-7.10709517675212E-046.72111941423526E-031.59418102675589E-022.44078788510759E-020.730538922155694
52207/27/2007 7:04:37 PMAccessRat2006MGIBAllCombinedAllCombinedAllCombined95010.0030199999969810000009.52176602967384E-03-1.56233866973614E-02-1.49901562045925E-02-8.41152147122661E-03-5.44762510232609E-034.05576508882054E-047.33588282834675E-030.0164686012768352.61950530898991E-020.754491017964078
52307/27/2007 7:04:37 PMAccessRatLifePayIAllCombinedAllCombinedAllCombined185010.00226499999773510000001.06805510377118E-02-0.014626108301625-1.20428523073918E-02-6.08984658852046E-03-2.22851888030373E-034.04428276871694E-039.82402795120803E-031.68655595406923E-022.40410662469335E-020.856287425149709
52407/27/2007 7:04:37 PMAccessRatNoneAllCombinedAllCombinedAllCombined95010.00241599999516810000005.8666292477999E-03-1.13844546795139E-02-1.04027261898336E-02-6.72766534794549E-03-4.77103336054974E-03-3.11542830732602E-044.5158867397345E-031.06654135236169E-021.76803347713142E-020.730538922155694
Modules & VBA :: Making Already Opened Excel File Invisible
Jan 14, 2014I have the following code. In the Else part of the code, after the wb.Activate line, what code can I place here that will assign wb.Name to the objExcelApp object ao that when the line .Visible = False kicks in, it will make the already opened MS Excel file invisible.
Code:
Dim strExcelFile As String
Dim wb As Workbook
Set objExcelApp = GetObject(, "Excel.Application")
If objExcelApp Is Nothing Then
Set objExcelApp = CreateObject("Excel.Application")
objExcelApp.Workbooks.Open FileName:=strExcelFile
[code]...
Not Allowing Multiple Users Unless File Opened Through Access
Jul 9, 2013I have a database with three users, only one of whom has editing privileges. As such, I didn't see the need to setup a front end and back end (nor did I know how at the time). Anyway, that's not the issue. The database is saved on a networked computer that all users can access. Unfortunately, when accessing the database in the shared network folder, only the first user can access it. Other users will double click the file and virtually nothing happens.
However, users can instead open Access first, and open the file through the program fine. Why this would be the case and how I can have multiple users open the file from the shared folder?
Modules & VBA :: Copy Excel File Or A Table In Access To Specific Location On FTP Server
Jul 11, 2013I need some simple code that will copy an Excel file or a table in Access to a specific location on an FTP server. I would think this would be a very simple task, but I have yet to find any sample code that is *simple*. I have seen lots of code that requires downloading this dll or that mda, but the examples don't work. There must be something built into MS Access 2010 that will allow a file to be uploaded to an FTP site.
All the variables are known:
The FTP location (it never changes)
The FTP Username and Password (they never change)
The destination folder on the FTP site (it never changes)
The File type (it never changes)
The File name (available from the form in Access from which this will be executed)
I can either produce an output file, then copy it to the FTP site, or I can export the table directly to the FTP site with the file name for that day.
This seems to be a very simple task with no simple solution. Currently I am using an FTP app to get the file to the FTP site, but I would like to automate this. The process that creates the output file is already automated, so I would just like to add this to the existing code as its own module.
I'm looking for a simple command on the idea of:
DoCmd.FTPFile, acExel, TableName, FTPFilePath, FTPFileName, Username, Password, acUpload
just made all that above up and none of it is a real function/command in VBA, but is just the kind of thing I'm looking for.
I would think that since I can download and XML file from an FTP site that it should be child's play to upload a simple file to an FTP site, but I can't figure it out.
Modules & VBA :: Copy And Rename Excel File To Subfolder With Name Entered In Forms Control?
Jan 5, 2014I am still trying to copy an Excel file from a parent folder to a sub-folder, that this code creates, and name the copied file with the name used to name the sub-folder, using the name entered in a control field (named 'TheDirName) of an Access 2007 form. Here is my VBA, which names the copied file "TheDirName.xlsx.:
Private Sub MakeDir_Click()
Dim appExcel As Excel.Application
Dim lngLastDataRow As Long
Dim Folder_Path As String
'Create path for customer folder & files
[code]....
General :: Forms And Queries In One ACCDB File - Path Setting To Linked Table File
Oct 5, 2014I've got the forms and queries in one .accdb file and my tables in a separate .accdb file. The forms file links to the tables in the tables file. The tables file resides in a folder called simply enough C:acc_tables and thats where i browsed to (obviously) when i set up the linkage.
One of the users does not wish (for whatever goddamn reason) to create a C:acc_tables file to stick the tables file in , and wants the tables file in some other folder.. Unfortunately this user does not have the skills to delete the existing links and re-link to the tables file after putting it in the folder he wants.
Where in the file that holds the forms and and queries do i find the path setting to the tables linked file? Can it be changed without deleting links and then re-linking?
General :: Make A Copy Of BE File Rather Than To Make A Copy Via Code
Nov 26, 2012Would it be ok just to make a copy of the BE file (every so often) rather than to make a copy via code?The user can then just paste over the original if it becomes corrupt.
View 4 Replies View RelatedForms :: Copy Certain Fields To Another Field In Same Table
Sep 8, 2013I am using MS Access 2010 and I am trying to figure out how to copy a field(s) to another like record. For example I have simple split-form that contains detail items purchased (product number, item purchased, cost, etc). I have a check box call "chkApproved" and date box called "Approved Date". The user have a choice to select the invoice number, once selected the invoice number (there maybe anywhere from one or 2 to 4 rows based from the same invoice number).
The manager will go to the first record and check the "chkApproved" and date is automatically updated as today's date (Approved Date). This is fine if there is only one row, but when you have the same invoice number with 2 to 4 rows the user has to go to each row and check the box. I want to somehow automatically populate the rest of the rows within the same invoice number I don't need to create a new record only updating the existing records.
Forms :: Copy Record Data To Another Table Through Form
Aug 1, 2014I have a form with 2 subforms, each based on their own table. One displays categories of invoices (e.g. rent, electricity, etc.) including some details like monthly costs.
I would like users to be able to select one of those categories and copy this to another table, after which they can enter on what date the invoice was paid, to make a history of payments.
At first I based fields in the history table on fields in the categories table so that you could simply pick a category from a combobox. I had an after update event on that combobox that also automatically set the 'costs' combobox to the matching price.
Worked fine, but had one snag: if I update the costs of a category in the categories table (e.g. the rent goes up) then all the costs in the history table was also updated because the fields got their info from that table.
So now I no longer have field from the history table based on the other table, and want to use 'set value' to copy values from one table to the other. I'd like the user to be able to somehow select a category with a single click on a button, and getting the info for that category copied. However, how can I get access to know from which record I want the fields copied?
Or is there a completely different way to get a history of payments that works much better?
Forms :: Maximize When Opened By Macro?
Feb 19, 2014I have a form that maximizes when it loads and that works fine, but when I run a macro to open it the command is bypassed. Is there a way around this?
I've tried setting the code to run on different events (open/activate) but that didn't change anything.
The reason I want a Macro to open it is so I can set the property to Add only, perhaps there's another way I can do that, perhaps as part on the form open event in VBA instead?
Forms :: Refresh Form That Is Already Opened
Mar 17, 2013I have forms that show commitments by Client, by Cost Centre, by Provider etc.
If I add new commitments or edit commitments it is done through the Commitments by Client form, as all other forms lead back to this one.
To create a new or edit an existing commitment, it is done through a Commitment Form, which goes into a query (query A)which does all the calculations. My client form has subforms based on Query A, however my other forms (commitments by Cost Centre etc) have subforms which have querys that are based on Query A . I hope that made sense.
My problem is that If I edit a commitment, the client form and subforms refrlect the changes imediately, even though they are open and I can see them changing when I change the commitments. However the other ones don't unless I close them and re-open them.
My navigation within the database is based on once a form has been opened it is set to be invisible untill called on again (i.e. visible = False).
How to requery all the forms without having to close them.
Code For Closing All Opened Forms
Jun 28, 2014I would like to ask if there is a way so that using vba code to be able to closed any opened form in my database.
View 9 Replies View RelatedAdding Record In Table Not Correctly Opened
Jun 25, 2006The system is about a shop which gives credit facilities to its customers and so has to keep track of payments effected by them.
I have 3 tables: Customer, Payment, Balance. The main table is Customer, with primary key CustCode which is an autonumber. It keeps personal details of the customers. The Payment table keeps details of payments effected by the customers and the Balance table keeps the overall balance for each customer. The relationships are as follows:
Customer to Payment, 1-to-many
Customer to Balance, 1-to-1
Fields in Payment table: CustCode, PaymentDate, AmtPaid
Fields in Balance table: CustCode, Balance
Problem 1
I have a data entry form for Customer. When I create a new customer record, I want a new record automatically created as well for the customer in the Balance table. How can I do that?
Problem 2
I need to produce a report on customers who have not made any payments during the previous month. I’d like to know how to do that as well.
I hope I’ve made myself clear enough. Thank you for all help.
Modules & VBA :: Table Relationships And Nested Forms - Copy Sub Form Records
Aug 3, 2015I've attached screenshots of the table relationships and some nested forms that I need to discuss in my database.
If you look at the forms screenshot you'll see I have a main form "business/cmc issues" that uses a combo box to select a business name; nested into that I have a second form "policy issues log" that holds details of policy issues about that business; then inside that I have a sub form "issue updates" that records brief details about the actions carried out in trying to resolve each policy issue.
The same policy issue can affect more than one business (because of a relationship between the two companies etc) but still needs to be viewed separately. So for example in the business selector combo box I might have business "ABC". In the policy issue it might say "doesn't pay on time". The "doesn't pay on time" issue might also apply to business "123" and so if I picked that business from the combo box you'd see the same policy issue.
Because it's the same issue for two separate businesses, the actions carried out will be the same, so what I want to do is, after a new action is carried out (where relevant) to be able to click a button that would run some code that copies the actions entered in the sub form for business ABC and pastes them into the sub form for business 123 where the product area and policy issue are equal. This is to avoid having to enter the same data twice.
Forms :: How To Copy Unbound Text Box On Form To A Current Record In Table
May 17, 2015I created an unbound text box on a form that automatically pulls the current logged in user by using this:
Private Sub Txtuser_Click()
Me.Txtuser = Environ("Username")
The form grabbs the logged in user with no problems, however, I ultimately want this information to also end up in my table. So the form has three boxes (to keep it simple). The user will type their first name and last name manually on the form which the record source is this "table" where their name goes to the table last name =Field 1 and first name=Field 2 respectively. I want the unbound box from the form to place the logged in user in Field 3 for the current record.
Forms :: Right Click Listbox To Copy Selected Items To Temp Table
Mar 7, 2013I'm trying to create a right-click event on a listbox that will copy selected listbox item(s) to a temp table. So far, I've got this code to acknowledge the right click:
Code:
Private Sub List0_MouseDown(Button As Integer, Shift As Integer, X As Single,
Y As Single)
If Button = acRightButton Then
MsgBox "You pressed the right button."
End If
End Sub
Problem is the selected item on the list box doesn't move until after the mouse down event so whatever code I would run would involve the wrong record(s).
I'm using Access 2000 and 2003. How to get the the correct record selected on mouse down, or point me to a working example of right-click functionality on a listbox.
Forms :: Access Form Must Be Opened In Design View Before Use
Oct 1, 2013I have a access form that has a text box that holds a search term. The search term is used as a variable in a query. The query results populate a list box. Selecting a result in the list box populates the rest of the form where the record can be edited. All of that works great...sort of. When first opening the form you cannot view any records. The search function works fine and the list box populates but selecting a record does not populate the rest of the form. Attempt to navigate (next, first, etc.) and you get a "You can't go to the specified record" dialog. There is a simple fix for this. Open the form as normal. Then switch to design mode. Do absolutely nothing. Switch back to form mode. All is well.
View 1 Replies View RelatedForms :: Macro To Close Report And Opened Form
Mar 10, 2015I am using MS Access 2003.
I would like to open the form = VendorPayables_Maintenance_F
Choose a cheque number
Print the cheque
How to create a macro to
close the open report = d_One cheque information
and close the open form = VendorPayables_Maintenance_F
Forms :: Hide Controls When A Form Is Opened Conditionally
Oct 7, 2014I've searched and can only find information setting the visible property when selections are made on an open form--I want to set the visible property when the form is opened depending on which avenue the user chooses from the navigation form.
I have a navigation form (Form A) and a second form with a subform (Form B). The user will choose from a combobox, either an existing record or a new record on Form A. On Form A there are two buttons, one that will take the user to the correct record on Form B for editing and one that will open to a new record on Form B. Once Form B is open, all controls will be blank (if a new record is chosen) or with certain controls prepopulated if an existing record is chosen.
What I want to do is to hide controls on the main form (not the subform) of Form B if the user chooses an existing record. Form A's buttons work correctly to open Form B right now. I want to be able to hide prepopulated controls on Form B if the user chooses an existing record from Form A.
Here's the code I'm using to open Form B to an existing record. I'd like to set the visible property here if at all possible.
NOTE: "Form A" and "Form B" are not the actual names of my forms--it's just easier for illustration purposes here in my question.
Private Sub cmdAddLogEntry_Click()
DoCmd.OpenForm "Form B", acNormal, , "Activity_ID = " & Me.cboINum
DoCmd.Close acForm, "Form A", acSaveYes
End Sub
Copy File To Another Location
Jan 20, 2006From a command button what would be the code to copy a file from one location to another i.e copy c:datasalesdata.mdb to e:databackupsalesdata.mdb
Jabez
Which Tabel Was Opened, Who And When Opened It
Apr 26, 2006Hi
I want to see Which tabel was opened, who and when opened it.
And if possible I want to see what is changed.
I want to see as I mentioned above as a "log file"
Thank you
Sedat ONAT
Using Copy Of Existing Workgroup File On A New Db?
Jun 17, 2005Hi all,
I've set up security on my database before with great success, and now I'd like to use the same workgroup file (a copy with a new name and location) to secure a nes db.
I open the new db, and join my earlier created mdw file. I'm prompted with that I have joined my workgroupfile.
I then set permissions for each user in the workgroupfile, remove admin rights for the admin user account, and assign admin rights to my own account. I am also the owner of thr db.
I now run the security wizard, and I make no changes to any checkboxes.
This goes nicely, and the wizard closes after making a backup file.
I now want to re-join the system.mdw file, so I don't get prompted with the logon dialog when opening a new db or an unsecured db.
If I now try to start my new secured db by double-clicking on the secured mdb file it opens ?????
Where am I going wrong?
Thanks in advance for any help.
General :: Copy A Pdf File Between 2 Directories
May 31, 2013I am trying to copy a pdf file between 2 directories. I am using xCopy, When I build my copy statement based upon various parameters, it looks something like this:
xCopy C:PDF995OUTPUT*.* P:Billing1297344137.pdf /y
I might note that there is only one file in C:PDF995OUTPUT at a time. So I copy what is there, delete it and it is empty until the next usage.when it executes the statement, I get a DOS message asking whether what is being copied is a File or a Directory.How can I identify that without needing to respond to a message?
Modules & VBA :: Copy File From One Folder To Another
Feb 28, 2014I need to create a function that I can launch using a macro that will copy an excel file from one folder to another in the file system.
View 4 Replies View Related