Access 2003. Job booking data base with up to group of 10 different users. At the end of the month, I need to count the total amount each user has checked a particular check box and then automatically calculate the total of the whole group.I have only a basic working knowledge of Access 2003....
View RepliesI am trying to create a query that has a self referencing running total based on the values (point totals) of itself (running total of values in the running total column that have already been calculated for all previous records) plus the total of new points being added in the current record, less the total of points being removed in the current record. This running total can never go below 0, if it does, the running total should restart at zero and add in only new points and begin the process again with the next records
I am able to do this in Excel in less than two seconds so I know there has to be a way to port this into a query. I've attached an excel example of what I am exactly trying to do
If it takes multiple queries to complete the required output I am ok with it. In my previous outtakes I have had up to 8 queries but just couldn't seem to do it..
How do you count how many times a checkbox has been checked?
learnasugo
I need to make an order purchase form like i have customer table and product table, i want to make a form which creates order for a specific customer and I can add as much items as i want and than calculate auto the total price, and an option to make a report for it.
View 5 Replies View RelatedI have a report which gives me a count of records found for each group
group 1 - 10
group 2 - 13
group 4 - 82
what i want is a total below this - ive looked at calculated controls however cant seem to get it what soever - I've tried likes of =sum([counts])
I have a form register with student names and three columns with checkboxes showing whether they were present, absent or late. The form runs an append query that records the data into a historical table, however on submission the checkboxes remain ticked. way to clear the checkboxes once the data has been submitted?
View 13 Replies View RelatedI have a report, where some features are listed as checkboxes. I'd like to have all checked checkboxes counted at the end of report. I've created text field. What shuold be the command in it ? (to count only checked boxes).
Thanx for any help
I have a form where you can select four different options: Health, Dental, Vision, and COBRA, with a button to run a census. Right now, the button runs a DoCMD.OpenReport to open a report named "Census" where there are four text boxes, "Health Coverage Type" "Dental Coverage Type" "Vision Coverage Type" and "COBRA Coverage Type". I want the user to be able to select a checkbox, then filter the report to only enable the text boxes of the corresponding names.
So if someone selects Health & Dental, I want the report to run with the "Health Coverage Type" and "Dental Coverage Type" textboxes enabled/visible, but the other two to be blank.
I've got a field in a table that is a multiple drop-down list. In the form, I don't want it to be a drop down list, but I want the options in the drop down list to be checkboxes instead (not within a drop down).
View 4 Replies View RelatedFrom a dropdown field in the form it's currently possible to choose a geographical region for which to generate a report. The data populating this dropdown is pulled in from a Value List as follows:
" ";"*";1;2;3;4;5;6;7;8;9;10;11;12;13;EU;WD
I now need the ability to choose various different regions simultaneously which is not possible with the current method. I've looked into a nested continuous form and a multi-select combo box or list box, but none of these are as user friendly as my preferred method.
What I would like is 15 checkboxes plus a 16th to select/unselect all. When any of these checkboxes is checked, I need to create something like a dynamic value string or temporary table to hold the list of chosen regions until the generate button is clicked at which point the data is used to generate the report and cleared. I also need a piece of code to check/uncheck all the boxes.
I want to create a form that allows users to update multiple fields for multiple assets. Below is what I came up with:
Ideally, I'd like the subform to be filled in by having the user select multiple Assets from the S/N combobox field which would then auto-populate the "Type" field. Then they would fill out the appropriate fields they want edited in the top part of the form. They hit save and magic happens. This would also be nice because only assets they want edited would be displayed (easier on the eyes) and no distinguishing would be necessary. To do it this way, I know I would need to use a temp table but I wanna avoid using temp tables.
I know I can do this by adding a Yes/No field in the "Asset" table, setting the "Asset" table as the subform's recordsource, and then putting a checkbox in the subform and allowing them to check the assets that they want to edit (which would also allow me to sort it instantly so that checked Assets are at the top of the datasheet for easy viewing), but I would like to know if there's a way of accomplishing this without the use of checkboxes.
I know I could also use a listbox and that allows them to multi-select items, but I'm not sure if that allows me to group all selected items at the top of the listbox for easy viewing of selected items. Plus it would involve a lot of scrolling (there are over 2k assets).
I have an issue with a couple of my combo boxes. When in form mode the drop down menu displays a list of options (taken from my source table), this is fine, but the problem is that it allows the user to select more than one of the options in the form of checkboxes. This is not what I intended.
I've attached to pictures to demonstrate the problem. The first is ComboBoxQuery (the one with the problem) and the second is ComboBoxQueryWorkign (the one without a problem).
I'm not sure why this is happening and I've tried comparing all the properties of both these combo boxes and changing some of them to see if I can eliminate the problem without any joy.
I use a very standard SELECT statement to pull the data for the combo box:
SELECT CountryID, CountryName FROM tblCountryInfo ORDER By CountryName
I have a spreadsheet that has been downloaded from a website. On the website people have chosen from a group of 28 checkboxes their answer. I have imported this spreadsheet into access. I now need to be able to run a report that shows only the one they chose instead of listing all 28..
View 1 Replies View RelatedHi, very new to access and chucked in at the deep end.
we require a database which will be used by multiple users to place orders.
the users are at different locations although they all log on via terminal services so connection issues are minimal.
i understand that we require a fe/be database because of the users.
the users will only work with forms and reports. they should not be allowed to see the other users orders and the form needs to automatically put the users id into the order.
the only way i can see to achieve this is to make a custom form up for each location. would i be right in assuming this?
if so, how would i prevent one location from opening up another locations form? infact, i wouldn't want one location to know that there are other forms for other locations.
any help would be appreciated. thanks
How multiple users can work on the same database across LAN, without using share point.
View 6 Replies View RelatedI have a report that shows 3 pivot tables on the same page. What we would like to do is total (or perhaps subtotal) the three tables into a summary table.
each table has number code, name, data 1, data 2.
The three tables are identical with the exception of I filter on only specific number codes.
Currently I simply have a 4th pivot table with all the number codes and just hide all the rows except top and totals.
I would love to be able to use something like subtotal to simply display the totals (from my 3 tables)
I have a group of inspectors who are assigned a group of buildings. I want to show a count of how many each inspector has. The end result should look like this:
Jones FSL 0: 0 FSL 1: 0 FSL 2: 1 FSL 3: 2 FSL 4: 2 Total: 5
Smith FSL 0: 0 FSL 1: 1 FSL 2: 2 FSL 3: 2 FSL 4: 1 Total: 6
White FSL 0: 1 FSL 1: 3 FSl 2: 0 FSL 3: 0 FSl 4: 0 Total: 4
Hi, i'm trying to calculate the amount of employee for each company giving me a total in the queries.. how do i go about this? I'm not an person who uses Access to solve this. I have amount 20 Companies stored and over 800's employee.. Here are the field in the table:EmployeeIDEmployeeNameNumberofEmployeeThanks! Hope this helps.
View 1 Replies View RelatedI have created a profiling form for my school. Each boy can access his form using his admission number ( Adno) which is the primary key. On the form are lots of sub forms - for things like favourite authors, clubs, teams played in etc - but these don't have a primary key ( as they are automatically linked to the Adno via the main form ). Unfortunately when several boys are filling in their own forms at the same time I keep getting error messages, one says that the data can't be updated and another says that there is a primary key problem.
View 8 Replies View RelatedHi All.
I try to generate a report which calculate subtotal for patient AMOUNT for current year and total for whole period from first visit to current date. The result of subtotal =Sum(IIf(Year(Date()=[VisitYr]),[Amount])) is the same like total. What is a correct way?
Thanks.
Say I have a table with ID's of people and a column with the hours they need to work on a specific day. I want to make a query where I get the total working hours for every person in that table for a certain date. The problem is that when a specific person in the table has no hours for a certain day he doesn't show up in the query if I choose that day.., is there a way to make sure that I get everybody's names for every day even if they don't have any hours on that day, but instead of not showing it would show a "0" instead?
View 1 Replies View RelatedI'm having a problem trying to have my query place the group record count on my form. The scenario is this: I have the query name (SPED Main Query Count) group the School Name field and then count the school name which in turn gives me a count of each school. but for some reason the field in the table name School Cnt will not build a relationship with the Countofschool Name in the query in my relationship.
View 13 Replies View RelatedI have a form with 5 options in a group. This works fine when I only have 1 filter applied to each button. I need to select the "Not Collected" button and have it filter out and show "Collected = No" and "Deleted = No". Here is my code..Case 3 is the one I'm currently working on. I can get the others once I figure out the first one.
Private Sub Frame799_Click()
Select Case Frame799
Case 1
[Code].....
We use an Oracle base software called Trapeze and Microsoft Access sometime used as a front hand to access the Trapeze oracle tables.
Since a user has to be created in Oracle, with update, delete, read, write, append rights, for Trapeze to work correctly
Is there a way for me (, even though the user has update, delete, read, write and append rights via oracle) to limit them to "read" only on the table and not update when they access the database through MS Access to create raports? I would like to allow them to create reports by linking to Oracle tables, but I don't want them to be able to update or delete or change the data in those tables.
They only way I want them to change the data has to be through the Trapeze GUI front hand application.
Any suggestions is greatly appreciated.
Thank you.
I'm trying to run a line of code after doing a Query Search that reports back the total number of results pulled from the search. I've dug around and found some useful code, but nothing that gives the results I'm needing. Most everything gives me the total number from the query. I'm also using a Split Form.
The process goes: Enter numeric search in Text10 and hit the search button to run the following macro: [studentID]=[Forms]![Query1]![Text10]
It then gives me the requested information.I have a second text box (Text19) that needs to display the number of pulled results. I've written VBA that only gives me the total number searched for studentID or for the entire Query.
Can I simply add an additional line to the Macro?
I have an access dbase with a single table
I am interested in reporting so need totals, I can write a query that will count the number of machines in a dept like so
SELECT [Computer Inventory].Department, Count([Computer Inventory].ID) AS CountOfID
FROM [Computer Inventory]
GROUP BY [Computer Inventory].Department;
This works fine, however I now want to add more so are two fields
To_be_migrated
Is_migrated
These are just checkboxes so I assume criteria is true or false
I need a query which will give me
The total number of machines by dept
The total marked for migration
The total migrated