I am building a form to create a user record and at the same time i have some yes/no options which are located in other tables but when i want add a user i cannot select any yes/no options they seem locked?
View RepliesI am fairly new to Access and my "changed" position at work requires that I learn much more about the software. My first challenge is to learn how to make an existing form prompt a user to confirm or cancel changes. I don't know anything about coding but I searched online and found some coded that is supposed to make this happen. I went to "form properties'' and typed this (below) in BeforeUpdate:
'If the form data has changed a message is shown asking if
'the changes should be saved. If the answer is no then
'the changes are undone
On Error GoTo BeforeUpdate_Error
[Code] ....
BeforeUpdate_Exit:
Exit Sub
BeforeUpdate_Error:
MsgBox Err.Description
Resume BeforeUpdate_Exit
After saving changes to the design, I tested by changing the record. I received no prompt.
We store data for clients which can be found online. Our current method of getting the data so we can analyze it is to copy a table found online and pasting it into excel.
What we want to do is to copy that data into an access table. This equates to inputting multiple records at the same time. There are 5 columns and around 20 rows (records) pasted at the same time. I want to do this in Access, through a form which would them store that data in the appropriate table.
I assume there is an ActiveX control out there which can put a spreadsheet in an access form. Then i could maybe write a VBA procedure to input the data into a table.
I am trying to create an input form for input to tables.There is a main TblContacts table with fields such as: LastName, FirstName, Address, etc. There are also ID fields for the Company and Country and joins to the Company and Country tables, each with just ID and name fields.I want to have all the fields from the TblContacts table and the Name fields from the Company and Country tables on the form. I want to be able to select the Name fields from the Company and Country tables from combo boxes and for these also to populate the Company and Country ID fields (from the TblContacts table).
To create the form, I selected Create Form whilst the TblContacts was open. Then, I added the combo boxes pulling the names from the Company and Country tables.My problem is that the selection of the Company and Country names above is NOT populating the Company and Country ID fields on the form (taken from the TblContacts table. I have checked in relationships that the joins have been created.
I want to use a Form or Report to have the end user enter say a Customer # or the Customer Last Name and then have Access pull and display that record so that the end user can than print all the saved information from that record.
View 2 Replies View RelatedI am creating a database of bird banding and breeding records for the refuge where I currently intern. To do this, I have created the following tables:
Adult Banding Records
Nestling Banding Records
Historical Banding Records
The specific issue:
I have already created forms for entering data into these tables, but now I would like to create a "search" form that will use the primary key (which is always the band number of the individual bird, across all tables) to search ALL the tables and pull up all the information on that record. This will be convenient when we recapture a bird that is already banded, so we can look up their information in our database. Also, since I plan to add many more tables, it would be nice to not have to search each table individually.
I have 5 tables that I would like to input data in. It can only be done with a single form. The fields I want to input in have the same names in all 5 tables, for example:
Table 1:
Name
Age
DOB
Table 2:
Name
Age
DOB
Table 3:
Name
Age
DOB
Table 4:
Name
Age
DOB
Table 5:
Name
Age
DOB
Is it possible to input data into all of these fields in each table using one textbox for each field?
Preferably without having to use code but if it cannot be done without it then that would be fine.
Please could somebody point me in the right direction of code.
I have a database which I would like to query using a form with a combobox or two, each of which containing a list of eg. Customer Names, or Reference Numbers, which will then produce a report which can be printed out.
I know basic ADO, like get the database, open it, find records, update and delete records, however I have been unsuccesfully searching for the code to open a report, which will respond to certain sql parameters that correspond with the values in the combobox. And then be able to print that report if possible.
I would be much appreciative if anyone would point me in the right direction,
Thanks!!
I am working on a database that uses a form requiring personnel to log in. This information comes from a user table and is something that I have added on numerous occasions to various databases. The question I have is in relations to a "lockout." How do I set it up so that someone gets locked out after so many attempts loging in on this form?
View 8 Replies View RelatedI currently have a pharmaceutical lot database set up in the following format:
MFGData (table w/Manufacturing Info)
QAData (table w/ Quality Assurance Info)
QCData (table w/ Quality Control Info)
PASData (table w/ Process & Analytical Science Info)
SCData (table w/ Supply Chain Info)
[Code] ....
Each table has a corresponding form for data entry in each area. The tables were subdivided in this way in order to limit each department's ability to edit the data of other departments. The only field common to each table is the drug lot number, or "Lot #" (which is the primary key of each table).
I wanted to make it so that when Manufacturing enters a new lot number on frmMFGData, it automatically creates that lot number in the other 4 tables. This process mirrors our actual real world business process, where drugs are manufactured and assigned new lot numbers by our manufacturing team, and then other departments simply reference those numbers when doing their part.
To accomplish this, I went ahead and set up 1 to 1 relationships between the various tables using their "Lot #" fields, establishing referential integrity and enabling cascading updates. However, when I attempted to enter a new lot number into frmMFGData (the manufacturing form), it didn't seem to appear in any of the other tables. If I edit an existing lot number and change it to something else, the change does carry over to the other tables, so I know that the cascading updates are working in some capacity.
If cascading updates cannot "cascade" new records, then is there any other way to accomplish this?
Hi, I have a big problem. Here is the business rule, I am trying to track meeging request(MR) made. A meeting request is made by a manager,MR can include many analysts, and MR involves 1 project. I need to generate several reports from the MR information so I am trying to make sure the info is inputed correctly. I am trying to creat an input form for the MR table (tblMR) The input form is going to contain all the fields from the tblMR except the manager_ID and and the Project_ID, I am also going to have it track which analysts attended the meeting(1 or more). The problem I am having is in creating the form but having the analyst, manager, project values come from their own tables but after selecting them through combo box or list box, for values of Manager_ID and Project_ID to be entered in the tblMR. And for the analyst involved to be stored in a a composit table called tblMR-Analyst. this table will help me track how many meeting each analyst has been to. Any suggestions will help.
View 2 Replies View RelatedI always have a problem with input forms in Access in that I usually end up with an empty excess record which is being created because I do not know how to program this correctly.
I have a Purchase Order Receipt form (frmPurchase). When I receive a certain quantity of an article associated with a lot number (or a serial number) I have another input form opening up (frmLotorSerial), passing to it through Openargs, the article and the quantity received.
Say we receive 10 units of which we want to register the serial number, I want the user to be able to enter a maximum of 10 units (could be 10 records if each record = 1 serial number, but it could be less than 10 if we have several units per lot number), and not one more, into this frmLotorSerial.
The record looks like this:
-key
-artno (article)
-recqty (quantity received)
-date
-warehouse
-lot number
I used the lost_focus event on lot number to check whether the total received quantity in this form matches the total passed to it from the Purchase form, and if it does to stop the input. Since I could not close the window in the code of this event (error 2585) I moved the close command to the current event of the form.
Doing this closes the form all right, but it always creates one record extra, which of course does not carry any information, apart from the date which has a default value of now.
How should I program/what events should I use to:
-test that the user should not go any further (total received in frmLotorSerial = total received in frmPurchase)
-close the window and, above all, not create this extra record.
I have a form "frm_PatientNew" based on table "tbl_patients", this form contains a button "cmd_NewVisit" which is supposed to do the following: opens the form "frm_NewVisit" for recording a new visit for the last recorded patient in "tbl_Patients", I found many approaches depending on DMax and Dlookup and they worked fine just if "frm_NewVisit" is bound to "tbl_Patients", but "frm_NewVisit" is bound to "tbl_Main" which acts as a container for all information (patient data, visit data,service done and service provider), so the form "frm_NewVisit" contains fields from different tables. I wonder if I should create "frm_NewVisit" as unbound form, then adding fields from different tables to it and using vba to populate "tbl_Main",
View 2 Replies View RelatedCould you please help me out.
I am trying to develop a DB that is multi user. i ahve not split the data from the forms into separate db's as the users are in different locations and our network can be very slow.
part of the requirerment is to produce a drawing approval form, my current sticking point is that the method i am currently using to create the forms only allows one person at a time to use the process.
currently i have a command button that runs a query and then creates a table from the results. the table is then used as the data source for a mail merged form in word.
what i ultimatly need is a process which allows multiple users to generate these forms at the same time and have the ability to save the form (with no code behind it) as a word document (either RTF etc)
i am thinking that if i create a query on the fly in VB and then use the results to use in a report this would allow me to do the above.....
So my questions are:
1) is my assumption correct
2) If so, how do i do it as i have never done it before
3) If the above is not the best solution/ does not work... what will/is
I am currently creating a form to input new return parts into a database. I am trying to automatically generate a tracking number (##-AA-####-####). I have gotten myself to generate the ##-AA-#### in a list box and almost was able to generate the sequence number, 0001, 0002, etc. using the dmax function. I would like to generate the sequence number one higher than the highest, depending on part type and last 4 digits of part number. Our parts have unique last 4 different p/n but more than one can fall under the same type.
View 14 Replies View RelatedI am building a form in access and I am trying to find a way where user input isn't possible in the associated textbox when "No" from on option box is selected.
View 3 Replies View RelatedI have a form. In that form I want to display a series of dates from a database table..ex. 12/15/2004, 12/16/2005, etc... Next to those dates I want to have a checkbox. The user should be able to click on that checkbox if they want to sign up for that date. So there could be more then 1 checkbox checked, but there will always be atleast 1. So my first question is, how do I make this work. I've tried several things and everytime I check on the checkbox it checks all of the checkboxes.
PLEASE HELP!
Subject 2: Regarding the above question, how do i reference those dates that I've checked the checkbox next to, to put into another table?
PLEASE HELP!
I am creating a form that has a bunch of yes/no box for daily task. Is there a way for access to record which user selects yes/no.
For example
yes/no box1 - user 1 completed this task
yes/no box2 - user 2 completed this task
and so on
So when i look back i can see which user complete which task. I did a bit of research and saw that i can save a user that update a record. But since this is a daily task, each new record will be a new day.
Last question.. honest.. maybe ;)
I have a query that prompts the user to display certain/all of the members in my member table. The problem is, using a parameter query in the memberID field only allows the user to send the message to one member, not multiple members. "1 or 2 or 3" or "1,3" obviously don't work.
I've tried creating a form with a list box to select the members (which I;ve done) but obviously you need code and stuff to get it to work which I think will be too complicated. Is there a simpiler way or is the form the only thing that will work?
Thanks
Kris
is there anyway you can create one form which updates all the information in multiple tables. I need to create one of these to make the navigation of the database more easy, so if anybody could help me it would be much appreciated.
thanks.
I'm currently working on a database which requires invoicing as a part of it. The invoicing is done based on quarters, and I want the users to be able to use a multiple items form, listing all of their clients, to create the invoices. Each invoice must be created individually so they can be e-mailed to the client, and saved to the clients folder. So I was wondering if it would be possible to create individual invoices for clients using a multiple items form.
View 1 Replies View RelatedI have a search form that looks up a value in a field and lets the user know if it is there or not, they have now asked to put in multiple values to search... eg. searching containers number, I will put user input box where they can put these numbers
NYKU023561
TRLU102356
TCNU123023
This will search my container number field and show a pop up message box saying..
Please note below
NYKU023561 - has been found you cannot use this container
TRLU102356 - has not been found please check internal system
TCNU123023 - has beeen found you cannot use this container
Below is the basic search I had before which was all I needed.. how can I adapt this?
Code:
Private Sub Command256_Click()
If (CntSearch & vbNullString) = vbNullString Then Exit Sub
Dim rs As DAO.Recordset
Dim CNT As String
[Code]....
I am using Access 2002.I am going to be producing a macro that imports a txt file. Once the text file is imported there will be a empty field for a date value. Nothing in the file that is being imported will have a date in it.
I would like to (if possible) to, once the file is in the table, open an input box asking the user for a date (formated as YYYY-MM-DD) and once the date has been entered and the ok button pressed it inputs that date in to all records in the date field.
I have a table with 2 fields in it - Type and Pallet_Case - using a form the user enters the name of the Type and then from a combo box selects either Pallet or Case. There is a button on the form that is to save the new record to the table. (code below) The strangeness that is happening is that when the new record is added to the table, whatever is the first existing record alphabetically in the table is changed to the same Pallet_Case selection that was made for the new record.
I have a list box that displays on the form that is updated after a new record is added to show what records exist in the table (this is done by a query of the table and sorts on the type), so I can see this happening without having to open the table. It doesn't matter what sort order I put the list box in nor the table it still changes the first record alphabetically. And it is only change the Pallet-Case field. I even changed the first record to something else and it still did this.
Dim dbs As DAO.Database, strSql As String
Set dbs = CurrentDb
strSql = "Insert into [PP Type TBL] ([Prepack Type],[Pallet Case]) Values ('" & Me.Type & "','" & Me.Pallet_Case & "' )"
dbs.Execute strSql, dbFailOnError
I have a table, at the table I'v got these fields:
ID | num1 | num2 | sum
I want that the user put numbers at 'num1' and 'num2' fields and then the 'sum' field will calculate automatically the operator (sum=num1+num2).
I've tried to put any combination at 'Default value' of the sum field (all the fields are numbers , also tried to change the sum field to text...nothing works).
I'm getting a message that 'num1' field is not recognize at the table
(I tried =[num1]+[num2], without the '=', num1.table+num2.table , ...nothing works)
I also tried to do it with SQL command but it dosn't work.
There is any way to do it, is it possible? Or other way to do it at least at Form or at Report ?
Have a form that contains fields AssociatedProject, AssociatedRelease and then the user hits a button to create a new record and a new form opens to display this newly created record which sets the fields and also sets a field called Type. There is no issue with setting the field values and the new record is created. However, when the form opens to display the record it displays another record instead (usually the one before it). I think it could be related to the fact that the db resides on a shared drive which periodically has slow connectivity. However, I'm looking for a solution, perhaps modifying the code?
Here's the code:
Private Sub Command17_Click()
Dim strSQL As String
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim ctl As Control
Dim varItem As Variant
On Error GoTo Err_Command17_Click
Set db = CurrentDb()
Set rs = db.OpenRecordset("Tbl_Main", dbOpenDynaset, dbAppendOnly)
[code]....