Forms :: Custom Sequential Auto-number Of Different Series
Aug 18, 2015
I am using Ms Access 2007 and I am new to it..I have table of following fileds
ID (as a primary key)
AccountingYear (Filed for current accounting Year e.g., 14-15; 15-16)
Series (text- as R, Y, B etc to denote series code)
OrderNo (field to store custom autonumber Order No e.g., for Series R-1, R-2, for series Y Y-1, Y-2, etc)
I have created a form using all these fields..Now what i want to do is I want to create custom order no as first 2 digit of accounting year+Series+Autonumber of respective series as
14R-1
14R-2
14Y-1
14Y-2
14Y-3
14B-1
15R-1
15R-2
15Y-1
15Y-2
Means autonumber starts with 1 for every accounting year of respective Series..how to do this and what code or formula should be applied and where the code should be inserted as I am new to Ms access
I am trying to create an auto-sequential order number
Example : AB000112 - AB is standard prefix, ''0001'' is the first invoice number, ''12'' is the year 2012.
so the next order number should read AB000212 and the next AB000312
Out of this, I have to issue several debit notes relating to the same order number when the payments are due from customers over a period of time, this will be
I am trying to develop a form in the light of budgeting, therefore, I am designing a form with all possible options being an accountant I can think (it just a try nothing else)
Now here's the scenario
Fiscal Year Period Month Working days
Period - Month - working (are my heading) 1 - Jan - 22 2 - Feb - 18 and so on
This is what I am trying to learn, if I select period 1 "Jan", application/code fill -out remaining months automatically, e.g. Period 2 "Feb"; Period 3 "Mar" .....
and if I select Period 1 "Mar", then period 2 "Apr", Period 3 "May" ......
Currently, I am using combobox, but problem is, if I selection period 1 = "Jan", then I am unable to restrict period 2 using "JAN" as both combobox are separate.
I have created a Fiscal Database and want to create a custom ID Auto number. I would like the ID number start with FCP, the Fiscal Year (comes off of field of form), Fund Control Point (comes from the form) and a 4 digit auto number (to start with 0001). Example: FCP-2013-021-0001
Of course, this number gets stored to the Table and the ID number is generated/viewable (Un-enabled) in the form when information is entered into the form.The Fund Control Point is a combo box within the form and does auto populate some other fields within the form.
The fields in the form are currently pull downs or manual enrty fields (all based on the columns of the table... "Bound" I think you call it).
I also have fields that I manually brought into my form as text boxes that I am using to populate a series of numbers. I have named them P1, P2, P3 etc. They are unbound fields.
I have a field that I am totalling the unbound fields. It is a column in my table. At one point the control source name was the table coulmn name.
I have changed the control source to read =[p1]+[p2]+[p3]+ etc.
The total does show up in the field on my form
HOWEVER.... When I save the data the total number does not get brought into the table. All of the other fields do.
I'm using the following code to generate a sequential number"
Code: Private Sub Form_Load() Me.txtReceivedDate = Now() 'assign an EmailID when form loads Dim CurMax As Long Dim NewMax As Long 'poll the current EmailIDs for the largest number from current year and add 1
[Code] ....
Until recently, I didn't have any criteria on the DMax and it worked perfectly. It's now been decided that the EmailID should reset back to 1 when the calendar year changes.*
*EmailID is not my primary key - There is a separate autonumber field used as the primary key.
The table I'm using the DMax on has a field named ReceivedDate which stores a Now() when a record is created. The form I'm working in has a textbox named txtReceivedDate that is set to Now() when the form loads as can be seen in the code above.
What I'm trying to use as my criteria in the DMax is to match the Year() of ReceivedDate in tblEmails to the Year() of txtReceivedDate on the form.
For 2013, the current max (CurMax) EmailID is 21. If I set my computers date back to 2012 (where the CurMax is 3) the txtEmailID is still being populated with 22, even though txtReceivedDate shows a 2012 date.
I've tried a handful of permutations of the criteria string:
I've tried a few others long the way that I don't even remember, but there's probably little value in listing all the ways that don't work.
I've got a syntax issue within the criteria since it's the first time I've tried to use one and it contains a couple moving parts.
Once I get this sorted out a follow on question is about dealing with the users changing the txtReceivedDate to a different year. As of now, I have the same code (everything except "Me.txtReceivedDate = Now()") also present in txtReceivedDate_LostFocus(), but I'm not sure that's the best place for it.
1. Which event occurs when anything changes on subform (Delete row , add row , perform the sort, Especially when you add a row to be inserted in the current sorting between the rows)
2. I have column sequential number that need updating when occurs any event on subform
3. "On current" is event that occurs always when changing rows in subform, how to process rows sequential (row by row) thru subform and update field that represent sequential number.
Ineed to track Trailer security seals that are sequentially numbered with 8 digit numbers...They are physical seals and no efile with the numbers to upload into Access...is there a way I can put in a range and Access will populate the rest in a table?
Here is my issue. In a table with an Auto Number index some records have been deleted. I have been able to recreate them along with their original auto number. The problem is that I do not know how to append these records forcing the original auto number. I have tried changing the auto number field to a number field in the table, this works except I cannot change it back to auto number.
I am sure I’m not the first with this question or issue. I did search through a couple hundred entries about auto number before I posted this question.
Hello, I am very new to access and I am trying to create a simple sytem to help us create part numbers. We are using a 2 digit descriptor to help define the part some. Then we want to add a sequential 7 digit number on to that.
Example:
01 (is electrical) 02 (Shop supplies) etc....
So...
01-0000001 would be a part number for an electrical part.
I do not understand how to have access add the zeros to the front. I would also like to be able to jump a bit out of line to reserve part numbers for certain projects and also include some that we already have.
If this make any sense to anyone, any help would be appreciated!
Im trying to create a document register in Access 97 to create and track document numbers, for this i want to assign a 6 number unique id to each record starting at 000001 going up in order to 999999 which will form part of a unique docuement number ...i know this may be a really easy thing to do but can anyone tell me how?
I have a form on which I need to print a sequential number - increasing by 1 each time the form is printed. I cannot think of a way to do that - perhaps something returned from a query? Any suggestions?
I placed the code Nz{DMax("field name","table name"),0)+1 on the control source of the ColNo field and i also tried copying numerous similar codes to the BeforeInsert, OnCurrent, etc.. events, but the result is ALWAYS THE NEXT MAXIMUM NUMBERFOR THE "ENTIRE" POLID.
What i mean is, if i enter a new record, it would give me a sequential number of "4". I figured out this is because 3 is the last maximum number as i have shown on my sample table. Even if i use the PolID "789", the number shown on the ColNo field results to "4".
IT SHOULD HAVE BEEN "2". Considering that the last ColNo used for PolID 456 was "1".
Hi, im pretty new to access, i need some help or a pointer on how to set up a sequential number. i have a orders table with an order number starting GO how to i get access to count up in ones from the starting number. regards
I know that there may have been many posts on this and I have searched for a total of about 2 hours in these forums before posting, so please don't shoot me down for asking this.
I simply need to know how I can create a unique, alphanumeric order number. I was going to use Autonumber, but from what I have read on these forums, that is not the way to go, as Autonumber is simply to identify the record.
What I need is an number like so: ST000. It needs to start at ST142 and increase by one each time. Obviously I would like to avoid gaps from records being deleted or not completed etc.....
I really have no clue how to do this, and would appreciate it if anyone can point me to a post that would help, or offer me the solution.
I have a table like the one below. I need to Auto Sequence based on JobIDOne in the field that says sequence in the manner that I've typed. Hand typing is not an option because by table will be updated regularly. All other fields are updated via a form. I need a either a macro or VBA solution that can reconcile this, preferably through the table. Note, I do not want to use a query to create this sequencing or SQL language as I do not know how to write SQL commands.
I know it can be done but I've seen about a thousand ways to do it that I haven't been able to modify for my specific table.
DateOne TimeIn JobIDOne InitialsOne Dates Worked One Sequence
I am trying to create a sequential number field in a query. I cant use an auto number for the fact that i am combining multiple tables. Any help with this would be greatly appreciated.
We have a large database table [PRODUCT] with the following fields PROPNUM and P_Date and GAS. We need to normalize the GAS field to the first month of production based on P_Date and sequential months following to average the data. We believe the easiest way is to create a sequential number for each Key PROPNUM that represents the first month of GAS the second month of GAS etc.
We have followed several of the posts on how to sequentially number records, but are struggling to get them to work.The latest effort was to use the make a table query creating an expression with the following.
I need the auto number to be in specified format as ASI-23-0001. So I added the format "ASI-23-"0000 in the formats and I got it succesfully.The fueld name is "Part Number"
I have added the Part Number field to a form as combo and I was able to list the values in the drop down combo.
I wanted to use Dlookup command in the program to auto fill the next field in the form say "Description".
I am using the following code Me.Text30 = DLookup("[Description]", "item_master", "[Part Number] = Form![Combo36]")
But now the data in the combo is treated as text because of the prefix "ASI-23" and I get data type mismatch error.
I am working in ms access database form. I have a form with detail section. In detail section i would like to make sr.no field auto increase each time new quotation is created. Using AutoNumber didn't work because because it doesn't start the serial number from 1 for each new quotation.
I am not sure if it is possible to implement this but I would like your input. We get request from client via a web based form which contains a unique ID number called RDEFNumber. When we process the request internally, we use this number to identify the request throughout the process. The request from client contains processing of multiple files which are transmitted to us in different times of the day or days.
Every time we receive a file, an email is sent to the IT team with all the information about the file. We use an internal database to send the email to the IT team and use the RDEFNumber as the identifier in the subject line. What I am trying to do is to add an additional number at the end of the RDEFNumber automatically to differentiate the subject line.
For example, we take "1791" as a RDEFNumber. For the first time we enter 1791 to the database RDEFNumber field, it should check the table "tblRDEF" (record source) for duplicate value. If no Duplicate exists, it should keep the number as same. When we get the next file for processing with the same 1791 number and enter this number in the RDEFNumber field, it should automatically change it to "1791-1" since "1791" already exists in the database. When we get the next file, the number should change to "1791-2" and then "1791-3" and on.
Basically what I have is a database for tracking/logging parcels that arrive to the office. I want to be able to generate a reference number based on the date of arrival: i.e. the reference number should be ddmmyy### where ### is a sequential number. I know that I could just use the primary key's autonumber, for the sequential number but if I do this then the sequence will not restart at 1 on each date and because we receive a lot of parcels the reference number will grow to be too big to print out on the collection slips in just a few months.
two tables (one with the date and staff on duty that day and the other with the parcel's info') with a one to many relationship
I also have a query (Named: FullLog) that picks up the following data from the tables:
The field named Count is a DCount function that I used to find out the number of times each date is repeated. This is the Expression that I used:
Count: DCount("*","FullLog","DateReceived = " & [DateReceived]) [Note that DateReceived is first converted into a string using CStr()]
This is as far as I have been able to get, I have been looking for weeks for a solution to this problem but I have yet to find one. I don't even know if the DCount function is the correct way of doing it, I did read somewhere that this produces a very slow query.
Effectively what I want to be able to get is something of that resembles the following
I have a rental database and I print several contacts for leases etc. what I want to do is have a unique reference number or something inserted to the report every time that it's printed. What I am trying to achieve is to keep track of which tenant corresponds to the report (Lease) printed by using reference number.
There is a seperate form which holds the tenants details and I would like to have a field on that form which would show the same reference number as the report so I can track which report was printed for who.