I have this database, and it was always customized every month. Is it possible if Access will customized the form using a form? The form has a category Order and under Order there are different order names to be checked, is it possible if the user will just add another order name and it will be added on the form.
View RepliesI created a database for obtaining customer information at a trade show. The entry form is set to Pop up. Entry in data fields is required. I set a macro at the end of the entry form, "New Record Macro" to save the record and then to GoToRecord to create a new blank form for the next person to fill in. When a field is left blank, an error screen pops up using the actual name of the field left blank. Then a Macro Single Step error screen pops up. I need to replace these pop ups with customized directions. I'd like to completely eliminate the Macro Single Step error. I have no experience in Visual Basic. I am using Access 2010.
View 4 Replies View RelatedI have the following script which customizes the right click menu.
The problem that I am having is that I call the script to add the right click from the form open event and then multiple users can not access the same database.
I use one for forms and then another for reports.
If I manually close the open forms then reopen them then multiple users can use the same database.
If I close and reopen forms with vba the right click still remains making the database not accessible to multiple users.
It is definitely this as when I comment it out from the open event of the forms then everything is OK.
I call the following from the open event of the form as follows
Code:
Public Sub Form_Open(Cancel As Integer)
FormsShortcutMenu
End Sub
The following is stored in a module
Code:
Public Sub FormsShortcutMenu()
Dim cmbRightClick As Office.CommandBar
Dim cmbControl As Office.CommandBarControl
On Error Resume Next
CommandBars("cmdRightClick").Delete
[Code] .....
Basically I have a Customer Form, which I have a New party button on it,this button opens up the party form to a new party, what I would like it to do is open up a new party but make the new party for the customer I had selected in the previous form.I have tried the GoTo macro's but cannot seem to get it to work.
I am thinking on clicking the button it will need to get the Customer ID, and then open the party form, create new party, and paste in the Customer ID, which then updates the Name - Date - Address - Company Fields.
I have been tasked with creating a tool to analyse mobile phone bill data and present the analysis, and our recommendation, to a customers. Being new to Access (other than basic tuition) this has been a slow uphill task, which is finally nearing completion, however there is a problem which I have not yet been able to overcome.
The requirement is for the DB to open first on a splash screen (lets call it Form A) with fancy picture where our customer is selected from a combo box, the customer is then telephoned, a linked computer screen is established and our staff then click "Go" to proceed to a second form (Form B) showing an account overview and more details.
The problem I have is when "Go" is clicked, the second form loads via on click event, and even populates the correct customer in its combo box. Unfortunately that is as far as it gets - the combo does not look up the information. The customer needs to be selected again for the subforms and subreports to load with the customer overview. To clarify, form B just sits there blank until the customer is re-selcted from the combo box in form B.
On the form: User enters first name, then last name. Upon updating the last name field, I would like another form to pop-up and display all the people with that same first name and last name that the user just entered.
On the pop-up form: All of the matching first names/last names are listed with a button control beside each record that says 'Select'. The user clicks the select button beside the record he/she wants. This pop-up form closes and all of the data from this selected record is now showing on the original form.
So far, I have a query/form that pops up only showing the matching first/last names. I'm having a hard time getting my original form to auto-populate with that record that the user selects on the pop-up.
(Also my main form is actually a sub-sub form - so in my trials I could've been massacring my syntax trying to point to it.)
Ok, I got this template from the Microsoft Office template site. I want to customize it a bit, but I have been trying and trying and cannot get it to do what I want. I would like to get rid of the - after the postal code, so that it looks like 68214 instead of 68214-. I have attached the file if anyone is willing to take a look and edit it for me or if you could try it out and explain how to do it. Any help is greatly appreciated.
jbarnes
I'm currently using Microsoft Access 2000. In there I've created a Customized Menu. Now what I'm looking to do is - when I click a menu item, I want it to enable another menu item. I tried using "SetMenuItem Action" but it keeps on telling me that this function only works with customized menus. I'm sure I created a customized menu.
any help would be greatly appreciated. Thanks!!!
Hi all,
Is there any way to customize an autonumber field to be in the format Raaa, where aaa is in integers??
Thanks.
Rgds,
Tracy
Hello all:
Thanks for all your numerous help.
I posted this earlier, but got no response, your urgent help is required.
I usually get 2 error messages on my form.
When I set up the table, I made the date field mandatory. The first error message, error 3314, "The field 'Memo.Date' cannot contain a Null value because the required property for this is se to True. Enter a value in this field"
I would like to change this error message to:
"Enter Date of Memo"
The second error is:
Microsoft Visual Basic
Run-time error '490':
Cannot open the specified file
End Debug buttons.
I would like to change this error message to:
"The file does not exist/it has not been previously saved."
And I don't want the End or Debug buttons to show.
Thanks for your help once again.
Friends,
I would like to create my own input mask for a ssn field.
The problem is that my ssn field has 13 characters (text) and the following format 000-00-0000xx.
The xx stand for any additional 2 characters.
Is there a way I can create an input box for a similar format? Thanks.
When we use DoCmd.SendObject, the object name is always the same name of table, query or report.Can we customize object name to something else more descriptive? For example:
If I send the report "SalesPerSalesman" about John Smith,
the object name now is "SalesPerSalesman.pdf"
If i send the report "SalesPerSalesman" about Maryann Johns,
the object name would be again "SalesPerSalesman.pdf"
However , the object name I would like "SPS_JohnSmith.pdf"and the report for Maryann Johns, I would like as object name "SPS_MaryannJohns.pdf"
Syntax
DoCmd.SendObject ObjectType, ObjectName, OutputFormat, To, Cc, Bcc, Subject, MessageText, EditMessage, TemplateFile
ObjectName � Name of table, query, Report etc.
I have one table containing name of restaurant with its address etc. Then i created another table to list out the restaurant workers names and details. Just as an example,
Table:Restaurant
Restaurant name
Address line 1
Address line 2
Restaurant #
Website
Table:StaffContact
Staff Role
Name
speciality
email
phone
I have the main form that has all the restaurant details only. And i have another form containing the Staff information. Please note the two table have a relation and it works well.
Now to make it user friendly(basically easier for the lazy ones), I dragged the staff contact form on to my main form and displayed it as a datasheet(basically a sub form).
Now, my boss does not want users to add/delete on this sub form(datasheet). So,he wants me to create buttons to open new record of staff for each restaurant(new form)
My issue is with opening a new record to enter a new person to the staff list and give them a role as well in form view.The new form has
So i ran a Macro, with open form with Where condition
Code:
[Staffcontact]![Rest Name]=[Forms]![MainForm]![RestaurantName]
But, it does not work .
What I would like to do is create a list box that will only display the information from another form that is related to the current form.So I have a form call Equipment Catalog and that form is related to Equipment features 1 to M relationship and the Equipment Features is related to a Features form M to 1.
So what I want to do is display all the related equipment features in a listbox that is related to the current PK of that form.So if there is only one feature on one form the list box will only display that one item however is there is 6 features on another it will display all 6.I have been trying SQL and Queries but I still can't get it to work.
When I right click a row on the data sheet side of a split form an select "New Record" I want the curser to go to the first field on the single record side. I've placed this in the OnCurrent but it did no good.
Code:
If Me.NewRecord Then
Me!Descrfiption.SetFocus.
End If
Any way to set the focus to the single form Side of a split form?
The user will be creating a new project that contains a bunch of releases. The releases have standard names which are stored in a table tbl_ReleaseNames It should be noted that the list of names is not static.
The user selects which of the releases pertains to their project and then based on their selections, new records would be created in tbl_RFP_Release and then a subsequent form would open where it would display each of these newly created releases where they could enter additional information. I thought of creating an unbound checkbox associated with each of the standard names, and then checking to see if the checkbox was checked and then creating the new records followed by opening up the new form.
When I'm applying a sort and filter in a form, Access is updating the Filter and Order By properties of the form, so that it is possible to re-use in conjunction with Filter on Load and Order By on Load properties. However, a consequence of this is that when the form is closed, it prompts the user whether they want to save the design of the form. I want to circumvent this as I don't want to re-use the sort and filter and I don't want to be prompted to save the design of the form.
Although I can circumvent this by closing the form using a method that doesn't prompt for saving, the additional complication here is that the form in question is in the Navigation subform of a Navigation Control. Hence when I click on a another Navigation button, it (not me) closes my current form and hence prompts me whether I want to save the design of the form (if I have been sorting and/or filtering). I can't see how to circumvent this and the prompting is resulting in unacceptable usability.
I want to use buttons on a form to change the sort order on a continuous form. In the buttons click event I am using a public function (named Sort_1) to change the sort order. The first element of the event call is the name of a generic query (named Sort_1_Query1) and the query field to sort (LAST_NAME OR FRIST_NAME, depending on the button.)This is the Click Statement.
=Sort_1("Sort_1_Query1","LAST_NAME")
This is the Public Function
Public Function Sort_1(SortName As String, FieldName1 As String)
DoCmd.ApplyFilter SortName, FieldName1 & "between 'A' and 'Z'"
End Function
I think the problem is in the use of quotation marks or trying to pass the query field name to the Do Command or the use of an ampersand.
I've built a PostgreSQL database for some ecology data and am trying to use MS Access 2010 to make a front-end for it.
I've created a form to display site data; it includes such fields as site ID, site name, county, state, landscape, etc. (There are more, but if I can get the idea down with a couple of these, I should be good to handle the rest). One can click through the form and see 14 pages of site details, which is fine because there are 14 sites.
What I want to do now is make a search form in which one can enter values for site ID, site name, county, etc, and somehow get the pages of the display form that match those values. It's not terribly important to me how that output looks - whether it's a list of matches that allows for clicking on a match and showing just one page of the display form, or whether it's a filtered subset of the display form pages that one still clicks through to view them all.
if there is code to write, where do I type it? Do I start my search form by making a form with the search fields as values, or is there some other way? How do I make those search fields into search boxes rather than display boxes?
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA"
id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR"
id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
1)
DoCmd.OpenForm "GASTOS_EDITAR", acNormal, , "[editar_id] = " & Me.Gastid
2)
DoCmd.OpenForm "GASTOS_EDITAR", , , "[editar_id]=" & Me.Gastid
3)
stLinkCriteria = "[editar_id]=" & Me![Gastid]
DoCmd.OpenForm "GASTOS_EDITAR", , , stLinkCriteria
4)
Private Sub btn_editgs_Click()
On Error GoTo btn_editgs_Click_Err
Dim strWhere As String
strWhere = "[editar_id] = " & Me.Gastid
DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere
btn_editgs_Click_Exit:
Exit Sub
btn_editgs_Click_Err:
MsgBox Error$
Resume btn_editgs_Click_Exit
End Sub
I am having a problem with making a textbox visible on a form if a checkbox is checked on the same form. I have done research on this site and have written the code below, but I am getting a Syntax error, see yellow highlight.
- My checkbox is named: Case is a Readmission from WRCA IP to WRCA IP
- My textbox is named: Date of Current IP Admission (I have defaulted this textbox to not visible).
Here's the code I have written:
Private Sub Case_is_a_Readmission_from_WRCA_IP_to_WRCA_IP_Clic k()
If Case is a Readmission from WRCA IP to WRCA IP =true then
Date of Current IP Admission.visible=true
Else
Date of Current IP Admission.visible=false
[Code] .....
I would like to create a command button on my form that copies values from 5 fields in the current record into a new record leaving all the other fields blank except for the new record ID.
The fields that contain the data that I want copied into a new form are:
1. Member_Name
2. Member_ID
3. Account
4. UBH/PBH
5. Assigned_WRCA
I am using Access 2007. I have had an application running now for about 1 year and now getting an error when user opens the database. (Have one for front end and one db for backend)
Here's the error message:The form name Switchboard is misspelled or refers to a form that doesn't exist.Also, multiple users are accessing the database at the same time.
I am using Access 2010 - Version 14.0.61.29.5000 (32-bit)
I am building a custom Export Wizard to export data to Excel using the Report Wizard for the basic ideas.
All I am trying to do is have a [Back] button on a form to open another form and close the current form.
Private Sub cmdBack_Click()
DoCmd.OpenForm "frm_ExportWizardPage2", , , , , , Nz(Me.OpenArgs)
DoCmd.Close acForm, "frm_ExportWizardPage3"
End Sub
The new form is opening but then the current form is not closing. All forms are the same size, shape and positioned centrally although this should not make any difference.
Could this be anything to do with which form has the focus when I open the new form?
We have a database with one main data entry which stores records in a seperate table. There are several thousand records keyed in using this form. Therefore, alongside the entry we have a search form which allow the user to search for a specific record and display it in the main if he/she needs to edit one.
We have received a request from users for a functionality which allows users to browse all records, using the main form layout, that they have keyed in. I guess what I am asking is: Is there a way to limit the records visible in a form using field on that same form as a limitation (ie. the users name - which is a required key-in)?
I have a Lost/Found property database which we use to keep record of the lost/found property and it is working fine.
As per our organization's policy, we keep the item(s) for up to three months in which if it gets restored to the owner then fair enough otherwise after three months the item(s) can be claimed by the "Finder". But for this very purpose we issue the Finder with a "Claim Receipt" which he/she should bring in when claiming for the item(s) after three months period. Therefore, It's just the right time to upgrade the database to a more professional level.
The database has one table and two forms.
One form (LostFoundForm) is visible to the user in which they enter data, this form has two sections; Item(s) & Finder's details and the second section is about Restoring details.
However the second form (ClaimReceiptForm) is hidden to the users (for manual data entry) and has only one section which is exactly the same as the first form's first section, i.e., Item(s) & Finder's details. This second form takes the data automatically from the first form because the table behind them is same and fields are same (please see attachment). Up to here it's all working fine.
I would like to introduce a Checkbox or a CommandButton in the LostFoundForm which when we click should pull up a msgbox asking "Do you want to print the receipt for this item(s)?" with a Yes/No option. On clicking "No" it should, obviously, settle down but on clicking "Yes" it should print the "corresponding record" from the ClaimReceiptForm.