I have a text box in a form, in which users enter updates. I would like that text to become the caption on a label in a printable report. How would I write the VBA to do this?
This code works well and frmRepair opens with the updated label caption. The original value was "Return/repair Information"
A few other things need to change on frmRepair depending on this caption as well as the values of some other fields, so I use the following code in the onload event (although I later tried the onopen even)
Code: 'Disable labels button if there is no RMA and the item is a repair MsgBox Me.lblmain.Caption If Me.lblmain.Caption = "Return/Repair Information" Then Me.txtRMA.SetFocus MsgBox Me.txtRMA.Text
[Code] ....
However, I cannot get this to work as the "if" statement always returns "Return/Repair information" and not the modified caption. The message box confirms that this is the case.
I suspect that this has to do with the point in time that the frmRepair loads or opens and when my code enters the modified values.
I can't seem to get past this expression/criteria problem.
[Actual] is my field I want to grab data from [L3-4-5] is my main table [CDATE] is a form control where the user enters a date [Quarter] is a number field and want it to equal 1 [Partname] is a text field and string it to equal 1
My current expression is:
=DLookUp("ACTUAL","L3-4-5","ID=" & [CDATE] And "[QUARTER]=1" And "[PARTNAME]='1'")
Although my other expression on another form works.In my if code statement I have
On a form I have multiple labels. In the Click event of all these labels I would like to call a generic function for futher processing. For this processing however, I need the caption of the label the user clicked on. How do I determine this caption?
I have a multiple column combo box on my form, that is correctly populating. When I make a selection, it displays the result from the first column. Bound column seems correct, as my table is being populated correctly.
1 - Can I display the values from both columns after the selection has been made?
2 - If not, can I choose to display the second column (not the first) after the user has made a selection?
I have globally defined 'Progress' as integerer and using the following code on my splash screen - i want to add a "." to the end of the label caption until progress = 10 (10 timer events)
Private Sub Form_Load() Progress = 0 End Sub
Code: Private Sub Form_Timer() Dim Dot As String Dot = "." Progress = Progress + 1 Me.lblProgress.Caption If Progress = 10 Then DoCmd.OpenForm "frmLogin" DoCmd.Close acForm, "frmSplash" End If End Sub
I am using MS Access 2010 and have an issue with one of my forms. First off, I have a table called coefficient which contains a column MIN, a column MAX, and a column COEFF.In my form, called CALC, I want to grab a number that it is in textbox [Text12] and place the related coefficient number in textbox [Text15].I placed a control source in [Text15] using =DLookup("[COEFF]","coefficient","[Text12]>[MIN] And [Text12]<[MAX]").
creating a DLookup expression for an unbound control on a report. This report displays data collected from the users from a table called tblaudit completed. This table contains (among others) three fields labeled below
Brand Form Area Changed
I also have another reference table labeled refevalareas. The fields in this table are as follows
BrandName FormName AreaName PointValue
I would like to create an unbound control on my report that "prints" the point value depending on the Brand, Form, and Area displayed for each record. Though the field names are different the data collected and displayed in each table is consistent. I haven't worked much with Lookups and the logic is challenging for me to grasp but I think I have the basic idea which is shown below..
I have a database which I have been using for over a year now which includes a Dlookup formula in a report.The dlookup references the query QRYDwgCount and looks up the number of drawings issued by a particular architect. I have been using the following formula which was previously working
The problem I have now encountered is a new job with an architect that worked on another job already in the database. Instead of bringing forward the number of drawings issued by the architect for this current job, the formula is showing the number of drawings issued for the earlier job. I therefore need to add "ContractName" = [ContractName] but I am getting either Error or an incorrect answer as the result.This is what I have written:
I have a form where I am using two combo boxes the second combo box fields are being based on what is selected from the first comb box. When I enter the DLookup criteria into the text box I am trying to lookup based on the selection of the combo boxes it returns nothing. Here is what my DLookup looks like: DLookup("[BranchNumber]", "[tblAllADPCoCodes]", "[ADPCompany]= '" & [cboADPCompany] & "' And [LocationNumber]= '" & [cboLocationNo] & "'")
I have a form with multiple combo boxes. Once the combo boxes are populated, I need the text box to look up the value in the query based on two combo box selections.I am attempting to do a DLOOKUP, but I am obviously not doing it correctly because the result is #NAME?.
Here is what I have done: In Default Value section of the txtONE property sheet: =DLookUp([fieldTHREE],[qryMAIN],[cmbONE].[AfterUpdate] And [cmbTWO].[AfterUpdate])
I've been asked to get involved in some access development but don't seem to be get my dlookup syntax correct.I essentially want to lookup what salary band different employees are in.I have two tables:
Employee Table) has the fields: Name, Type, Salary
Salary Band Table) has the fields Employee Type, Salary Band, Lower range, Upper range..my query syntax is:
Code:
Band: DLookUp("[Salary Band]","Salary Band Table", [Salary] & " BETWEEN [Lower range] and [Upper range]" & "AND " & [Type] & " = [Employee Type]")
I can get the first criteria to work but can't get the second part to work - currently it produces an error.
I have a table named z_ResltsSampleCountMonthly. In that table I have fields SampleSize, Month and LOB.
I have a report that I need to use a Dlookup in order to pull the SampleSize by LOB into my report. However, my report has three columns that change based on the start and end dates for the report. It shows current month plus the two prior months to show a trend.
So I have each column heading update automatically based on the dates the user enters into the start and end date on the main menu form.
If they select 12/1/14 to 12/31/14 the three columns heading would update to October 2014, November 2014, and December 2014. In the table I have the data for all three months so when I use this formula it works but it's putting September 2014 data under October 2014 so I need to have multiple criteria; one being the LOB and the other being the column heading which is equal to the field Month in the table.
In the "qryEmployeeWTax" i need to Lookup the [InitialTax] from the "qryreftbl_WTAX" based from the [ETPES] and [SalaryAfterStatutoryDeductions], so i am using this function:
I have been trying to find a solution to why I can't get a Dlookup with multiple criteria to return the value I need.
Essentially I am trying to use an Order Number to find the item number which is contained within another table. However the order number has multiple lines (suffixes) which alter the item number. Therefore I am trying to have the item number be populated by the correct 'combination' of Order Number and line ("suffix").
I have managed to use the Dlookup in the after update of each box of the form separately and they retrieve values in the table correctly:
Afterupdate of main order number:
Code:
Private Sub OrderNumbertxt_AfterUpdate() ItemNumbertxt = DLookup("item", "dbo_job", "[job] = '" & Forms![**INPUT]![OrderNumbertxt] & "'") End Sub
Afterupdate of suffix:
Code:
Private Sub SuffixTxt_AfterUpdate() ItemNumbertxt = DLookup("item", "dbo_job", "[suffix] = Forms![**INPUT]![SuffixTxt]") End Sub
However when I combine them as follows in the afterupdate of the Suffix box I receive a "Run-time error '13': Type mismatch"
Code:
Private Sub SuffixTxt_AfterUpdate() ItemNumbertxt = DLookup("item", "dbo_job", ("[suffix] = Forms![**INPUT]![SuffixTxt]") And ("[job] = '" & Forms![**INPUT]![OrderNumbertxt] & "'")) End Sub
I think the reason is something to do with some being numbers and some being a combination of text and numbers (based on the replies of other topics), but have been trying to modify these slightly and can't get it to work still.
Also the Order Number is a combination of letters and numbers (normally in the form of AB12345678), the suffix is just a number between 0-9 and the Item number it finds is a combination of numbers and letters.
I am trying to create a Dlookup in Access 2010 within a query using query wizard. I want to lookup the tax rate for an employee based on a salary range and their 'tax category' (string). Through troubleshooting I can get the criteria to work separately.
These are: DLookUp("Base","TABWT","[TABWT].[Taxclass] = '" & [FirstOfTaxGroup] & "'")
DLookUp("Base","TABWT",[grosspay] & " Between [TABWT]![Minimum] And [TABWT]![MaxBracket]")
These work and return the correct values for each column/row when I run the query.
However, when I combine the criteria (using the build wizard) as follows:
Expr1: DLookUp("Base","TABWT","[TABWT].[Taxclass] = '" & [FirstOfTaxGroup] & "'" and [grosspay] & " Between [TABWT]![Minimum] And [TABWT]![MaxBracket]")
The Dlookup will returns 0 values but will not give an error message.
I've tried quite a few variations on syntax and quotes and so on. However, it's just not working for me.
When I access the form the column caption is "txtHours" !
As you can expect it looks ugly.
So to get a decent caption like "Hours" I am forced to set my textbox name to "Hours" !
As you can expect it goes against my coding standard to do that.
Beside I want the caption of some textboxes to include some non-standard letters such as `é' è' '!' ' ' etc. and if I put those in the textbox name it ruins the visual basic code !
I'm curious whether it's possible to display the label for a combo within the box itself, i.e. it would say something like "Enter Name" until the user clicked on it and opened the dropdown?
I found this which is really old and I couldn't get it to work.URL....
I'm working with a table of bird survival data I am trying to summarize in a query. I've got a bit of a roundabout way to achieve my goal, but I'm curious if there is a simpler approach.
Background : In my table, each row represents a day I check a given nest and includes a [Nest ID] (not unique, multiple visits to each nest), a [visit ID] (auto numbered, so it's a unique value for each visit at each nest), the calendar day I visited a nest [Date], and [Survive] (1 or 0) depending on whether a nest survived or failed.
I'm trying to convert this detailed table into one that is more concise. Instead of each visit to a nest being a row, each nest becomes a row with 4 fields: The Nest ID, the minimum date (the day I found a nest), the last day a nest was checked (Max[Date]), and the last day a nest was checked alive (essentially max date where survival=1).
My current solution is to run 3 separate queries. The first queries the max date where survival=1, the second queries the max and min dates regardless of any other criteria, and the third brings both queries together.
I am curious if there is a way to create the same final product in a single query rather than doing multiple ones as I have done?
I've never used DLookup before and I can't get it to work for me so far.
I have 1 table which contains products and different properties of each product, such as the weight of the product.
I have created a query which sums the weight of all products, but only for those that have a value >0 in a certain field. This all works fine.
Now I simply want to display that calculated total weight in a text box on a form. So I thought DLookup could be used for that. But I can't get it to work, maybe because I'm not putting in any criteria? In the control source of the text box I've put the following:
=dlookup("[TotalWeight]","qryTotals")
I don't have any criteria, I just want the value from my qry expression. The textbox on my form now displays #name?