Forms :: Data Entry Form - Set Focus On Tab Control
Sep 10, 2014
On my data entry form I have a tab control with three pages
At the bottom of the first page I have a sub form with 3 fields
Currently, when tabbing, the focus runs through the fields as per the tab order
BUT
Once it gets to the subform (datasheet view) it jumps into the first field of the first record rather than the first 'empty cell' thereby starting a new record in the datasheet.
Once the three fields in the datasheet are completed the focus tabs back to the top of the first page of the form rather than onto the next page of the form
How to correctly reference controls using VBA so I could SetFocus where I want?
The Main form is called frm_Admissions
It has three pages called Patient, Treatment & Service Providers
Patient has a subform called sub_Cluster (which may or may not hold Cluster Information)
I would like the tab order to jump from the last textbox on the form into the first field of a new record in the datasheet (rather than the first field of any existing records)
Once it has finished in the datasheet I need to tab to the first field/textbox in the Treatment's page of the form rather than back to the first field/textbox in the Patient's page.
View Replies
ADVERTISEMENT
Jun 24, 2013
When I right click a row on the data sheet side of a split form an select "New Record" I want the curser to go to the first field on the single record side. I've placed this in the OnCurrent but it did no good.
Code:
If Me.NewRecord Then
Me!Descrfiption.SetFocus.
End If
Any way to set the focus to the single form Side of a split form?
View 4 Replies
View Related
Sep 1, 2013
This code stopped working without explanation after the longest time. I can't seem to fix it.
Code:
Private Sub Send_Letter_AfterUpdate()
Call Set_CallDateUserId
End Sub
Private Sub Set_CallDateUserId()
Me.txtCallDate.SetFocus
[Code] .....
View 4 Replies
View Related
Feb 16, 2006
I have a parent form called "frm_job_enter"
and two sub-forms called "frm_fabricator" & "frm_engineer"
On the sub form "frm_fabricator" I have a combo box and after updating this combo box (called fabricator) I would like the cursor to jump into a field called “ApllicationsEng” on the other sub form "frm_engineer"
Any help would be appreciated thank you.
View 3 Replies
View Related
Mar 7, 2014
I have a form with a subform on it. The subform has subforms. I need to set the focus on a control on one of the subforms. Here is what I am using.
START OF CODE
Forms!frmMain!frmMainSub.Form.frmContactLog.SetFoc us
Forms!frmMain!frmMainSub.Form.frmContactLog.Contac tMethod.SetFocus
END OF CODE
I use Code 1 to get to the third level. Code 1 works.
Code 1
Forms!frmMain!frmMainSub.Form.frmContactLog.SetFoc us
When I add the second line, Code 2, it doesn't work. I get the message "Run-time error 438: Object doesn't support this property or method."
Code 2
Forms!frmMain!frmMainSub.Form.frmContactLog.Contac tMethod.SetFocus
View 2 Replies
View Related
Jul 18, 2015
I have a form that allows me to update entries in a table. When I select the line I need to update and hit the "edit" button I get a run time error '2164' You cant disable a control while it has the focus. when I debug the line in the code that is highlighted yellow is
Me.cmdEdit.Enabled = False.
I developed the database in access 2013, and now I am forced to run the database on a computer that has Access 2003. I have changed the database base to access 2000-2003.
View 5 Replies
View Related
Jan 18, 2015
I have a toggle control on a form which depending on selection uses a loop and instr to make 'not visible' a set of controls on a subform.(forms! Mainform !subform.form)I get error 2165 but if I test immediatley before the make not visible process it returns the toggle frame as being the active control.
View 3 Replies
View Related
Apr 24, 2014
If there a way to set focus to a specific page from a command button on a Tab Control?
I tried Me.TabCtl0.Value = 3.
But it doesn't work.
View 7 Replies
View Related
May 3, 2013
I have a form with a TAB control and four pages. Each control of each page has his TAB index set correctly (starting from 0 to n), some of controls are not enabled to be tabbed. The form's cycle is set on "Current page".
I have two kind of problems.
First: I am on the last control of the page, pressing TAB key the focus gets invisible. Press TAB key again and the focus moves on the first page's control. For each page happens this behaviour.
Second: clicking randomly on the TAB pages the focus is not always on the control with TAB index 0, but usually on the last.
I have read that clicking on a new page the focus should be automatically on the first control, but this does not happen in my experience.
View 9 Replies
View Related
Oct 21, 2013
I have an unbound form with a combobox which needs to be validated before the control is updated.In the Before Update event I check that the value is valid and need to reset the value back to the previous value if not valid and then change focus to another control.I thought that the following code would work but the selected value remains in the control and I cannot move the focus to another control.
Code:
Private Sub cboYears_BeforeUpdate(Cancel As Integer)
Dim dteNewDate As Date
dteNewDate = DateSerial(Val(Me.cboYears), Month(Me.txtCalendarHeading), 1)
[code]....
View 7 Replies
View Related
Mar 5, 2015
I an trying to create a data entry form (IndividualsEntryFm) to input data for fields such as (First Name),(Birthdate) etc., these to be saved to the (IndividualsTbl)
I also have another table (NamesTbl) which has family names etc. The two tables are linked by a (MainID) field. I want a combo box on the individualsEntryFm so that I can select the family name. Then I wish the empty fields for the IndividualsTbl to be available to enter data.When I press the save button I then want this data saved, together with the MainID from the combo box to the IndividualsTbl.
I have set the IndividualsTbl with a (PersonID) field as an auto number each individual therefore has a unique PersonID but may well share the MainID. I'm trying to link many people to the same address.
View 1 Replies
View Related
Dec 18, 2014
I am trying to save specific data from a data entry form to a specific depending on what the user selects from a dropdown/combo box.
So if the user selects "test company from the combo box, that data (from that form) will save to the Test company data table.
View 5 Replies
View Related
Feb 18, 2015
My aim is to have my forms open to a new record, which I have done, but if my users need to then update or edit data in previous entries, they can click a button that allows this.
My thoughts were to add a button, then put in code so that the necessary properties changed the form from displaying a new record or records entered since opening it, to showing all records in the associated table....
As an example there is a table for purchase orders. When clicking on this from the main menu form, it opens up the purchase order form to create a brand new PO. At times though, we will need to revisit an order to attach a copy of an invoice, or update the cost of whatever was purchased.
View 5 Replies
View Related
Sep 28, 2014
My db has multiple linked tables. As time passes and work on a project continues data needs to be added to a separate table that is linked to the first table to be populated.
i.e., Initial design data is entered first, when drilling is complete more data is added to a linked table, when drilling is surveyed yet more data is added to the second table.
What I want to be able to do is to query for a particular set of existing design data, display this on a form and on the same line enable data entry to other fields from other tables which are linked to the existing design data.
View 7 Replies
View Related
Jun 3, 2015
I want a combo box in a form for data entry. Is the best method in doing this creating a new combo box in the form and linking it to a table, or using a lookup field in my table?
View 14 Replies
View Related
Apr 5, 2015
I have created a form to be used for data entry, Where i have identified standard data, I have set the Combo Box on the form to be a "Value List" so as to standardise the data entry.This creates two problems for me.
1. When Using the form, instead of saving the text value to my table it is entering a numerical character?
2. On two of my combo boxes, whilst they have been configured the same, when i try to select an option for the list, it does not accept it? when i try to type the same option into the field of the form it tells me that the option is not in the list?
View 2 Replies
View Related
Oct 9, 2013
I'm trying to create a Data Entry only form based on a small table called tblProject.
It consist of the fields Project_ID, Artist_ID, Project_Name, and Project_Notes.
I used the wizard to get me started and i know how to change the form to data entry only, but the problem is the vague data in the Artist_ID control. It shows up as a number, because it is an FK to another table (tblArtist) where more details on the artist are held. (including Band_Name)
I want to be able to make it a combobox with a list of the Band_Names from the tblArtist table. This would make creating "a new project" much easier.
View 4 Replies
View Related
Jun 18, 2013
I've just finished model of DB and it looks like this ( ERM.png )
Now I would like to insert some data into database though form, but if I for example add New contractor ( first name, last name ) with his location , it doesnt connect in table User-Location ... so it is not matched ...
View 2 Replies
View Related
Aug 5, 2013
I have a continuous form that is populated from a query. The header has data entry text box for NCR#. I want to run a update query to have the header update each record found in the query.
I've tried a number of things and the closet thing I've got is the header entry updating every record. Something is wrong with my criteria but I'm not sure what.
View 1 Replies
View Related
Aug 29, 2013
I am around 2 months working with access. I created an application/dataentry form and it was working very well. suddenly today, I got an error which says. Run-time Error 5 "Invalid Procedure Call or Argument. together with that or may be independent, a pop up search form just disappeared. I put a msgbox in form load of pop up form and the msgbox appears but the pop up form just disappeared.
I was about to give the application to use and thats when all these happened ...
View 3 Replies
View Related
Dec 6, 2013
I am tasked with creating a scientific database of fish catches at various different sampling stations. I envisage the entry form having a hierarchy, ie year, season, date, sample station, species caught, and then the specific associated data with each species (weight, abundance, length etc) will be a distinct record.
As fas as data entry is concerned, I would like the user to not have to re-enter the same information over and over when entering multiple species entries at the same sampling station, on the same date and so on up the hierarchy.
View 2 Replies
View Related
Nov 19, 2013
How do I create a form that will allow me to enter data into three different tables?
I have a rather simple database for tracking students. When I get a new student I need to take information off their paper application and enter it into three separate tables, Student, Families, and Demographics. Each of these tables contains the fields StudentID, StudentFirst, and StudentLast.There is a relationship between the StudentID field on each table, with Student being the main table and Families and Demographics coming off of it. All relationships are one to many. StudentID is the key for the table Student.
I want to create a form to add a new record to each of these tables. I want my data to be displayed in the Columnar style. I only want to enter StudentID, StudentFirst and Studentlast once and have it populate to all three tables.
I can create a form and a query that displays existing entries exactly like how I want to enter them, but of course I can not edit or add to them. I have tried using subforms, but they don't seem to link up. Once I enter the Name, I want it to be on all the forms. I don't want to have type it three times. I also tried creating three separate forms and connect them with the Navigation Form. The issue again is that once I enter the name in one form, it is not automatically on the next form.
View 3 Replies
View Related
Jun 26, 2013
I have a bank of 8 machines, I need the user to enter one record for each machine in order. I currently have these machines in a combo box, but any other method would be fine.
When the user opens the data entry screen, I need it to open a data entry with that machine selected and the machine number pasted to the [Machine_No] field, when the user has finished entering the data (mainly yes/no tick boxes) I need them to click a "Next" button and have the data entry form to move on to the next record, the next machine on the list. This needs to be done in machine order as listed. I would then like the "Next" button to be hidden or disabled or changed to "Finished" (Close Form button)when at the last machine in the list.
Is this possible. I am using Access 2010 ...
View 2 Replies
View Related
Nov 29, 2014
I am trying to open TabCtl86 forms in AddData mode if there are no records in a table for a user chosen form cboClientSearch. The tab control has three pages on it. At the moment I am getting an error saying "the form named '0' is either misspelled or doesn't exist".
I am using this at the moment; DoCmd.OpenForm Controls!TabCtl86, acFormDS, , , acFormAdd, acDialog
View 1 Replies
View Related
Sep 30, 2013
I have a data entry form to add new records to an Access database file called Claims. An auto-incrementing sequence number (SeqNbr) needs to be kept PER YEAR. If the user enters a date the sequence number pertaining to the year of this date needs to be incremented. The first record within a new year of course takes value 1.Records can be added at random for different years.
A simple SQL-statement can be made to determine the new sequence number:SELECT max(Claims.SeqNbr) + 1 from Claims where year(this.value) = year(Claims.EventDate)...this.value meaning the value of the date control in which the user entered the date.I need to return the new sequence number to another field on the form in which also the COMPANY CODE, YYYY and MM from the EventDate, the new sequence number and the USER INITIALS are concatenated.
View 4 Replies
View Related
Apr 23, 2014
I have a form that request the User to enter a Parcel ID number (99-9a-99-99aaa-aaa-aaaa). The sub form asks for the subdivision number, block number, and lot number. The subdivision number, block number and lot number are normally part of the Parcel ID number but sometimes they can be different. I want the sub form to fill in the Subdivision number, block number, and lot number as a default but allow the user to change the value if needed. currently the sub form will only show what is entered into the table itself if a change is made on the main form the sub form does not reflect the change.
View 3 Replies
View Related
