My form is a datasheet with 2 fields: "Product" and "Quantity". Obviously I can't add a calculated field in this type of form; however I would like the word " Total" to display in the "Quantity" field just under the last record. I would also like the sum of the "Quantity" field to display at the bottom of the "Quantity" field in the empty record below the last record.
View RepliesI'm trying to sum a couple of columns from a subform datasheet and carry them onto the main form.
My main form, [frm_tours_details], holds subform [sbfTours] which is a datasheet.
On [sbfTours], I've got a couple calculated fields within the datasheet, one, called "txtStudentSum", which calculates number of people total ([students]+[adults]+[numfreeteachers]) and one, called "txtptotal", which calculates fee for the program based on the following formula:
Code:
=IIf([txtMonth]>=10 Or [txtMonth]<=4,([Students]+[Adults])*7,([Students]+[Adults])*8)
(The fee is $8/person in season, and $7/person out of season.)
I've been following online directions I found to put a text box in the form footer which then sums each of these calculated fields ("txtStudentSum" & "txtptotal"), and then reference these text boxes from my main form.
However, the main form text boxes just come up as #Name? or #Error when I try to reference these boxes on the subform. Or, sometimes, the one calculating total students will show the total of ALL students, adults in the database, not just those for this particular record-but only, it seems, if I have the subform open separately first, then load the main form. I also tried putting the whole original calculations into text boxes on the main form, but they will only reflect either the current record selected in the subform, or they will only show the first record, regardless of what you've selected, depending on which way I tried.
I've attached a copy of the database ... click on the tab 'tours', then click on, say, tour #6 (since this one is multiple programs and needs to calculate) to open the tour details form.
I did the calculated fields in my table but in my datasheet they are not appearing. Are they not supposed to show there? I have not created any forms yet.
View 1 Replies View RelatedI am trying loop through a datasheet so that I can copy the contents of one field into another form.
I have tried using the bellow code to do this on a button click event. However when i run it I get an error telling me that the object doesn't support this property or method. Im not quite sure what this means.
Dim rst As DAO.Recordset
Set rst = Forms![Roll Out - Site Form]![Roll Out - Sign items pick list].RecordsetClone
Do Until rst.EOF
[Roll Out - Sign items added].Form![Code] = [Roll Out - Sign items pick list].[Form]![Item Category]
Loop
I have a form with a button that pops up a datasheet with a number of records. I need the dbl click event to populate a hidden text field with the id of the item that was double clicked.
Ive found the double click even and can get the double click to close the window, but i need to populate the text field as well.
I have a simple access database which up until now was working as it should. Then i made a Backup of the database Named it something different deleted certain data from the backup and when i went back into the original DB i now have #Name? where it used to calculate 2 fields.
View 1 Replies View RelatedI have a split form on my database where I have my combo boxes bound to a primary key but they display the description field so it's much easier to understand. Is there a way to do this with option groups? In other words, I would like the datasheet part to display the option group labels rather than the values so it is easier to understand.
View 1 Replies View RelatedI am struggling with the DateDiff fuction in a calculated field. After some study, I have used several variations of:
=(DateDiff("d",[DUED],Date())/7)
to calculate the time (in weeks) until a due date starting from today's date.
It continually turns up a specific date in the late 18 and early 1900's. It does not give me the number in weeks which was what I was hoping for.
Earlier I used a very simple: =DateDiff("m",[Birthdate],Date()) to calculate the age from a date of birth perfectly with no problems.
I do not understand why the formula is not working. Does it have to do with format or the fact that I am working with a future date and how can I rectify this problem?
I have a main form with several with four subforms. On the main form I have a bound text box [ShiftTotal] I have on each subform a unbound text box that sums a field [ExtTaxIn]. I am working with just one subform till I can get it to work correctly. The code I am using on the after update event is as follows.
code
Private Sub TxtSoldQty_AfterUpdate()
On Error GoTo HandleError
Me.ExtTaxIn = (Me.TxtSoldQty * Me.TaxIn)
Me.ExtPrice = (Me.TxtSoldQty * Me.Price)
Me.InvSold = (Me.TxtSoldQty * Me.UnitOfSale)
Forms!frmShiftMain!TxtShiftTotal = Forms!frmShiftMain!TxtRunningTotal
Me.txtExtTaxIn.Requery
[code]...
This sort of works but the [ShiftTotal] on the main form is always one table row behind. I think this is because of the order the event fires.
I have a form with three fields named 'quantity' (numberfield), 'service' (combo box) and 'amount' (calculated field with controlsource =[service].[Column](2)*[quantity].
I try to sum the amount field in the formfooter with =Sum([service].[Column](2)*[quantity]) but I receive an error.
Somehow it does not get the value for [service].[Column](2)
How can I do this?
The table for the form is called customer_detail
I've got a subform (simple table view) inside a main form, the subform (sfrmRecipes) just has an IngID field (which stores ingredient ID's) and a percentage field
I've added a few calculated fields to this subform, to assist users in making decisions, however each of these fields needs a sum total
So far my percentage field (which is an actual stored field in tblRecipes) is the only one with a functioning sum
for some reason the two calculated fields (which are both plain numbers, no text) do not give me a sum total option, i am only able to use the count function on them
Why calculated fields dont sum up and if there is an easy way to get it working (tried creating my own text field in the footer and manually typing SUM(fieldname), but it does not work).
My form has a button that has a calculated field on it (a dcount(...)). When the button is clicked, a couple of conditions are checked and if all is ok, it runs the vba code. If the tests fail, it returns to the form without running the code. All works correctly, except that the dcount number has disappeared. I finally figured out that it is now hidden behind the button. How do I bring it forward again programmatically?
View 11 Replies View RelatedA textbox on a form concatenates 2 strings. I want to insert that resulting string into a table .how can i do that ?
View 1 Replies View RelatedI have a form that is displayed continuously and there is a text field in it (Text12).In the footer of this form I would like to add a textbox that is the sum of all Text12's on the form.I tried =Sum([Text12]) in the textboxes control source but that is just displaying an error when I run the form.
View 2 Replies View RelatedI have an unbound calculated field [Txt1] that I would like to show the result as currency. The fields in the calculation are:
[CR] number, currency
[Commission1] general number, two decimal places
[Commission2] general number, two decimal places
The calculation is: CR15W * (1 - Commission1) * (1 - Commission2)
If I just set the field to currency it works fine. But I want the field to show the following:
"Some Text" & " " & Format(Calculation, "Currency")
When I tried to include the format it to currency I get type mismatch, run time error 13.
So I thought that perhaps I should try the following just to see where my error starts and I get the same error message when I use:
Dim Val1 As String
Val1 = CR15W * (1 - Commission1) * (1 - Commission2)
Txt1 = Format(Val1, "Currency")
Everything I have read says the formula is:
Format([Calculation], "Currency")
Is correct. So why won't it work for me?
We have a recent issue on client PC. After application running for a while, all the sudden the calculated field on the form not showing the details, though there is data on the control. After restart the PC, the calculated field display correctly. We guess this may be due to the theme we use.
View 3 Replies View RelatedI have a subform embedded in a main form, the subform has a field (text box) that is doing automatic calculation so no manual entries are needed from the user. I have tried to pass automatically the final result to a text box in the main form, but all events are not working (afterupdate, On change, On Dirty), etc.
I have a button to do the above mentioned in the main form, but I don’t want to use that button, I want to do all the process from the subform.
Also, from the subform I was able to do click on the button on the main form (programmatically), however MS Access is too quick and the value extracted from the subform is always empty (zero); Acees is finishing before the calculation is done.
I am using MS Access 2010.
I have a "Main" form called frmProjects that sports multiple tabs. One of those tabs is labelled "Milestones", into which I inserted a datasheet subform called frmSubMilestones. The table that feeds the subform is tblMilestones. I established the parent / child relationship between frmProject and frmSubMilestones, and everything is working just fine...
To summarize: frmProject as main form -> Milestones Tab on main form -> frmSubMilestones as datasheet subform on the Milestones Tab (there are other tabs that are not subforms).
I have been asked, for each milestone in the frmSubMilestones subform's datasheet, to capture the number of days spent by employees on a monthly basis. The Milestones table and the PersonDays table have a primary key and a foreign key that are similar.
To summarize: frmSubMilestones as subform -> txtAggregatePersonDays as calculated Textbox fetching data from tblPersonDays -> OnClick event -> FormLoad of frmPersonDays as datasheet PopUp form.
DoCmd.FormLoad is supplied with the usual parameters to make the PopUp form appear, filtered on the currently highlighted milestone. Everything works fine so far... well almost.
Problem 1: When I introduce new rows in the frmPersonsDays datasheet, everything seems fine at the surface, BUT the primary key of the calling form (i.e. frmSubMilestones) does not appear in the tblPersonDays table; this is normal because there is no form-based parent / child relationship between the two forms. As one might expect, I am trying, from frmPersonDays, to get the primary key value from the "parent" frmSubMilestones using the Forms collection. No dice. I surfed and surfed, tried the bang and the dot operators, drank scotch, but nothing worked. I had to add foreing keys manually in tblPersonDays to further my tests. I can't figure out how to reach any control on the calling form, which is a subform.
Problem 2: The calculated txtAggregatePersonDays on the frmSubMilestones works wonders for existing data in tblPersonDays. However, when I introduce new rows in the PopUp form, I also realized that the calculated Textbox in frmSubMilestones is not updated when I close the frmPersonDays PopUp. I have to close the PopUp form and move the cursor in the Main form (frmProjects) to refresh its associated milestones.
I have created a form that is based on a table.
The fields in the form are currently pull downs or manual enrty fields (all based on the columns of the table... "Bound" I think you call it).
I also have fields that I manually brought into my form as text boxes that I am using to populate a series of numbers. I have named them P1, P2, P3 etc. They are unbound fields.
I have a field that I am totalling the unbound fields. It is a column in my table. At one point the control source name was the table coulmn name.
I have changed the control source to read =[p1]+[p2]+[p3]+ etc.
The total does show up in the field on my form
HOWEVER.... When I save the data the total number does not get brought into the table. All of the other fields do.
I have a database to track temporary decertification's. I have the expiration and max dates calculated out from the original dates at the top of each box. The temp expiration date is calculated by adding 267 days from the first date . When we enter an extension, the new expiration date is 30 days from the extension date. My question is, how can I make the expiration date update when a new extension is put in.
For ex.
Temp Decert Date: 05 Dec 2014
Temp Decert Extens 1:
Temp Decert Extens 2:
Temp Decert Extens 3:
Temp Experation Date: 31 Aug 2015
Max Temp Date: 04 Dec 2015
how can I make the expiration date update to go 30 days from what is in the extens field 1, 2, and 3 (respectively) instead of 267 days from the original date?
So I want it to look like this after updating a field
Temp Decert Date: 05 Dec 2014
Temp Decert Extens 1: 30 Aug 2015
Temp Decert Extens 2:
Temp Decert Extens 3:
Temp Experation Date: 29 Sep 2015
Max Temp Date: 04 Dec 2015
My query contains two calculated fields [TaxSavings1] and [TaxSavings2], which are based on some currency and number-type fields in one of my underlying tables.
I just created another field in my query which looks like: [TaxSavings1]+[TaxSavings2]. Instead of adding the two fields, it actually lumps the two numbers together. For example, if [TaxSavings1] =135 and [TaxSavings2]=30.25, it will give me: 13530.25. I need it just to simply add, i.e. answer of 165.25.
Does anyone know how to correct this? Thanks in advance.
:confused:
Table1 contain Two fields (3Months) and (6Months)
Table2 contain Two fields (3Months) and (6Months)
the table 2 is the source of a form that will let the user change the numbers. table 1 should change Date1 and Date2 Fields based on the two fields (3months) and (6months) if i want to make a lookup wizard it should be changed manually and if i make a calculated field i can't find other tables in the expression builder
I have a query with a Date field for EndDate (the dates for end-of-week, Fridays in our case) and another field for Sales (number of sales, not dollars).I want to add 4 calculated fields that represent weeks and have the Sales appear in the correct column (field) for that date.So I will have columns for 10 July 15, 17 July 15, 24 July 15 and 31 July 15 and I want the Sales for each record to land in the correct date column, based on the EndDate column. (The 4 fields is just for the sake of the example, I will actually be having dozens of these calculated date fields).I tried to do it by setting up the 4 calculated fields like:
10Jul15: Sales
and then adding Criteria like:
EndDate = #10/07/2015#
It doesnt work.
I use access 2010.
I am assuming by the error code, one can not use a calculated field to calculate another field.
way to have auto summing of datasheet view of a field of a form back on the same datasheet at the bottom of the field. I do not want to use a calculated control.
View 1 Replies View RelatedHello,
I am trying to find out how to view the field names for variables while in datasheet view in Access. Or, alternatively, I would like to know how to toggle between datasheet and design view for a particular variable. Basically, I have a huge database and I need to be able to find the field name for a variable that I have identified in datasheet view, but right now all I know to do is go into design view and guess which field name it is, click on it, see if the caption matches what I see in datasheet view, and keep doing this until I find the match. I did not create this database which is why I am not familiar enough to know what goes with what.
Thanks in advance!