Forms :: Datasheet Subform Not Updating From Main Form Add Record?
Jun 23, 2015
I have a navigation tab with 6 sections, of the 6, 5 of them are self-made split view with a form view on top and datasheet on bottom and upon adding records through a command button on form view I would like the datasheets to update.
On other forms it would (I believe) update to the bottom of the datasheet, now on the ones I've been banging my head against it either replaces the top record or doesn't show up unless I switch tabs and switch back. From my searches I assume this is in need of a requery...
View Replies
ADVERTISEMENT
Dec 21, 2006
Hi, I have a problem I don't know how to solve it. I have a subform in datasheet view, linked to the main form. There is a running total on the main form based on a dsum on a field of the subform.
When I delete a row on the subform datasheet, the main form calculation is not automatically updated. I had to create a "update" button to do the refresh.
Is there a "on record delete" event available for a datasheet sub form?
Thank you for any help.
View 1 Replies
View Related
Sep 30, 2013
The situation is i have two forms, looking at the same table, but the main table shows more records, I would like to select a record in the datasheet subform and have the main form flick through to the corresponding record.
View 5 Replies
View Related
Apr 21, 2015
Within my main form I have a combo box called "workgroup." Also in the main form is a subform called "sfrmSubmissionRecords," and within this subform is a combo box called "covermemo."
Each cover memo is assigned to a specific workgroup, so my intention is for each time a new workgroup is selected from the dropdown, the covermemo combo box in the subform becomes populated only with the covermemos associated with that workgroup. I'm almost finished except for the final step when I try to make the values regenerate...Access says that can't find the referenced form "sfrmSubmissionRecords"
This is the code that I'm using:
Private Sub cmbWorkgroup_AfterUpdate()
Forms![sfrmSubmissionRecords]![cmbCovermemo].Requery
End Sub
View 2 Replies
View Related
May 19, 2014
I have a subform that is essentially a blank table which users can create rows depending on how many they require and fill the table in.
I then want to be able to append a main table with the records that have just been created in the subform's table... but here is where an issue lies.
Main Table has 6 columns... subform table has 5.
I already have the value to put into the 6th column but Im just not sure how to do it... the value is obtained from the original form.
For each record, copy that record into the main table + adding another value into the extra column.
Is this possible? or doable?
View 4 Replies
View Related
Mar 24, 2015
When I add a record in the subform and then move to the next record whilst still in the subform, the main form jumps back to its first record? I then have to move back to the right record in the main form to update the next record in the subform.
I want to move to the next record in the subform without affecting the main form.
View 1 Replies
View Related
Nov 20, 2014
I am currently working on a project in access 2010 and I am having a search for record dilemma. I have a main form that has a subform in it under a tab control. I place a search box at the top of the form so that user could select either the ID, the internal case number, and/or the reviewer name in the text boxes to search the record.
I have tried the using the search for record macros and the convert the macros to VBA and possibly write so extra coding for calling the subform into the search but nothing seems to work in getting the search in sync between the main form an the subform. VBA code that will look for same record in both forms.
The reason for the tab control is because depending on the data entered the users switch between mid section data about case and so one set of info goes into one tbl and the other goes into another, but the subform that I am referring to in this question is being generated from the same tbl as the main form.
View 2 Replies
View Related
Dec 24, 2013
I have two unbound subforms on an unbound "display form". I managed to link the two subforms by following this method: [URL] This is great and works well enough, however, by design, subform2 will only display records relevant to the very first record on subform1. I need subform2 to be filtered based on ALL of the relevant records being displayed in subform1 not just the first one.
Previously, subform2 was based on a query using subform1's records as criteria, but this gave me the same result.
View 14 Replies
View Related
May 1, 2014
I m having a subform in datasheet view. whn i use a join query as the record source for the sub form, i am not able to add or update any record in the datasheet. Is there anyway to use a linked query as record source of the datasheet with editable property.
View 2 Replies
View Related
Apr 5, 2013
I'm trying to create a record for a table that has 2 attributes:
ContainsTracks
+album
+tracks
I have my main form, where the album is determined by a TextBox. My subform has a textbox that lists the tracks (in datasheet view). I have this set up and working fine.At the moment if I try to add a new record by typing a new entry into the subform I get the error: "Index or primary key can not contain a null value". This is because both album and tracks make the composite primary key of ContainsTracks.
My question is, how can I tell the subform to grab the value from TextBox1 in the main form as the +album when I create a new record.I have provided two screenshot that perhaps explain my predicament a bit better
View 2 Replies
View Related
Jan 14, 2015
Basically, I've created a form to track maintenance requests for specific types of equipment. Basically it's like a ticketing system.
Once a user creates the request, I want to use a subform (I guess this is the best way) to let them add data to that specific main form record to track the progress of the request until the repair is made and the "ticket" is closed out.
Do I need to create another table for the "progress reports" (for lack of a better term) or should this be done using some sort of an append query?
I've seen plenty of sample databases where they have a box within a form that looks like a datasheet where these types of "update" notes can be added and then submitted with the click of a button, but I've never been able to get at the code behind it.
View 14 Replies
View Related
Jul 4, 2013
I am trying to build a sales invoice for a pharmacy that contains a sub form in a datasheet view. The main form contains only the invoice number and date while the sub form contains the drug code, drug name, Qty., Available Qty. and Updated Qty.
Presently, I can only code the update to takes place on each line of the datasheet. I want the update to take place at the end when I must have finished inputting all drugs bought with same invoice number.
View 4 Replies
View Related
Aug 5, 2005
Hi everyone!!
This is my first thread in this forum..Hope to get best from this site ..well i m facing a problem..i have a main form and a subform (which is in datasheet view) . Now i have a button called "close_form" in main form on whose click event i have writen this code :
Private Sub close_form_Click()
On Error Resume Next
DoCmd.DoMenuItem acFormBar, acEditMenu, acUndo, , acMenuVer70
Me.Controls.Item("fees sub").SetFocus
DoCmd.DoMenuItem acFormBar, acEditMenu, acUndo, , acMenuVer70
DoCmd.Close
End Sub
1. If i run this form directly from Access and there are no changes i do in the form and click this button then it gets hang after showing error "run time error 2046 ; the command or action undo is not available now " "press End or Debug or help"
2. As i have created a Custom menu, if i run this form from that menu then it does not show any error. But it runs fine for the first time but nothing happens on clicking this button the second time i open the same form ( in same session).
What to do ?? Please help ..
shikha
View 2 Replies
View Related
Aug 20, 2007
Hello everyone,
I have a query that runs from the main form when the command button is clicked. It displays the results in datasheet view. I want the user to double click a specific record and jump to that specific record in the main form. How do I do this? Sorry, if this is a dumb question. Please help, my boss is breathing down my neck. :eek: The main form is called Contracts. Each record has a unique ID.
Thanks,
Jason
View 11 Replies
View Related
Aug 24, 2012
I've got a main form with two lists boxes. I want to show the visible columns in my subform (which is a datasheet) in one listbox and show the hidden columns in the other. Also I want to allow the user to hide / show columns using right or left arrow buttons between the list boxes. My subform is bound to a stored procedure using ADO.
View 5 Replies
View Related
Nov 4, 2005
Hi,
Mainform and Subform are linked on field "barcode".
Barcode is the primary key for the table that Mainform is based on.
When user is entering a new record, I have the BeforeUpdate event of Mainform.barcode set to check to see if the barcode already exists in the table, and if so, to give the user some meaningful error message.
Works fine, except that the subform still updates to match the invalid, previously-used barcode. I want the subform to stay blank until the user has entered valid data in MainForm.
How do I accomplish this?
Thanks for any ideas.
View 11 Replies
View Related
Nov 30, 2005
I'm supporting some Access/VBA code which includes the following behavior:
When an update is made in a (linked) child form, the current date/time is written to a textbox on the main form via
Me.Parent!txtMod = Now
Likewise, the BeforeUpdate event of the main form updates the same field (and then does a bunch of form validity checks, possibly followed by a Save).
When we upgraded to Access 2003 from Access 2000, a problem erupted:
When the user returns to the main form (by clicking on any control outside the subform), the following message is issued: "This record has been changed by another user since you started editing it (etc.)..."
At this point the user must choose between "Save Record", "Copy to Clipboard" and "Drop Changes".
Conceptually, I see why this is happening (though I wonder why Access 2000 didn't flag it). The subform is the "other user". When the main form is returned to, it is "Dirty" (unsaved update), so the main form's BeforeUpdate event fires, and attempts to update the field again (Me.txtMod = Now). Since there is a pending change to the field, an error dialog pops up.
As a quick fix, I replaced the code in the subform with a flag ("Hey, I've been updated!"), which the main form checks on the Exit event of the subform control. But that seems a horrible solution. Surely there's a better way?
Notes:
1. It would be preferable to have the timestamp updated right away by the subform, though having it updated when the subform loses focus is better than nothing.
2. Since a subform is a control from the main form's perspective, I'm surprised that a change to that control doesn't render the main form "Dirty". I guess from a database standpoint it makes sense (the form's table isn't getting updated at all; just the subform's). But then, how does the main form know that the subform has been updated?
3. I tried catching the error via Form_Error. I can make the dialog not appear via "Response = acDataErrContinue", but unfortunately it defaults to dropping the changes (old and new), rather than saving the new.
View 14 Replies
View Related
May 15, 2013
I have been handed an Access database (Access 2002-2003 file format) to clean up and update as necessary. Currently I am trying to add new rows to a datasheet that is in a subform. I have had no trouble in the past adding rows and for some reason now I can't.
In some instances I can update an existing row but never add a new one. Also, the records options are greyed out in the ribbon except for a select few that are not useful (refresh all, totals, more). Can't add new record from their either. I am in the main form that contins the subform which contains the datasheet, in form view.
View 5 Replies
View Related
Dec 23, 2013
How can I obtain the value of a record from my subform in datasheet view?
Ideally I could double click in the "cell", for lack of a better word, and grab that value to pass through to another function.
On double click event? What then?
Edit: I suppose the user could select the row that the value is in as well. As long as I could then find the field I need from within the row. That might make things easier.
Edit 2: Sometimes I post before doing proper research. I've figured it out. Here is a quick example. The below code references an unbound subform called "Main_AU" where the field I want is "Description". The MsgBox is used to confirm that the code is grabbing what I want it to.
Code:
Dim test As String
test = Main_AU!Description
MsgBox test
View 3 Replies
View Related
Dec 2, 2014
In Access 2010, if you have a form with a subform in datasheet view, and you move the focus away from the subform, how can you tell which record(s) on the subform are selected?
When the subform has the focus, the selected row is shown with a blue/grey tint. But as soon as the subform loses the focus, this disappears and all rows look identical.
Its an issue as I have 2 datasheet subforms on my main form, with the 2nd showing records related to the record selected in the 1st. But as soon as the 2nd subform receives the focus, it is impossible to see which record in subform 1 was selected.
I have tried conditional formatting, but that does not work.
View 1 Replies
View Related
Dec 16, 2014
I am creating an events database. In my main form, I have all the details of a single event (billing code, fees, customer, support personnel, etc.). Then, I have a subform (form view) that lists each of the other services which share an event ID (this ID comes from a separate, unrelated events management suite). In the subform, I display the most-commonly-edited fields so that they are editable without navigating to a different record.
However, there will be instances where it becomes necessary to navigate to one of the records listed in the subform. I would like to make this a quick process by just clicking on the primary key in the subform, and have the corresponding record appear in the main form.
In my searches I've found a common suggestion to use a DoCmd.OpenForm method where the form opens to that specific record -- in effect filtering by the primary key number. I don't prefer this method because it disables the ability to navigate to other records using the previous, next, find records, (etc.) buttons without closing and re-opening the form.
Is there a way to make the main form 'jump' to a specific record by clicking on a control in the subform, without limiting the ability to navigate in the main form?
View 10 Replies
View Related
Aug 17, 2015
Currently i have a form with subform datasheet
Form from Purchase order table
Subform from serial table(Brand,Model,Type,Location,Serial) with serialtrans table(InOut,AQty,Comment)
(SELECT tbl_Serial.*, tbl_SerialTrans.*
FROM tbl_Serial LEFT JOIN tbl_SerialTrans ON tbl_Serial.SerialID = tbl_SerialTrans.SerialID
when i click on the datasheet row and delete the row it only delete the record from tbl_SerialTrans but record on tbl_Serial was not deleted
is there any way to delete it?
View 3 Replies
View Related
Feb 12, 2015
I have a main form and a subform.
Both forms have the field called JobID in common.
Both forms have a field called JobStatus.
Any easiest solution so that After I Update the field called JobStatus in the subform, it changes the field called JobStatus in the main form to the value which was selected from the subform?.
View 3 Replies
View Related
Aug 4, 2005
Hi,
I want a user to be able to create a new record in the main form, after they have finished filling in the boxes in a subform by pressing the Enter key, rather than having to click the 'new record' button on the main form.
I reckon I need a 'default button' on the subform but I have no idea what this should do when clicked to create the new record...
View 1 Replies
View Related
Sep 12, 2006
Hello,
I have tried everywhere for a solution to this:mad: Any help is much appreciated.
I have a main form with a subform. The subform shows related records using a match criteria. Each record that shows in the subform also has a unique ID. This unique ID is also shown on the main form record (although not used to link the main and sub forms).
I would like to be able to click on a command button on each of the records in the subform and goto the Main form record. I can't find any threads that deal with this though - sorry!
Hope it makes sense
DJ
View 1 Replies
View Related
Aug 26, 2004
I have a subform that is populated with records, filtered by two combo boxes on the main form. I would like to be able to double-click on one of the records in the subform and have it populated in the main form for editing.
Any help would be greatly appreciated.
Best regards,
MrAviator
View 5 Replies
View Related