Forms :: Datasheet To Fill Based On Linked Textfield
Nov 18, 2013
I have a form that is button launched from a main form. The main form and this form are linked via their id#. The problem I am at is there are two different types of information that a user would need to fill in depending on what the group code is next to the id#. So if someone has a LSE code then it would need to have 17 fields added to the datasheet (they are in their own table) and if it is MLS then their 23 values added to the datasheet but not all of the information when someone launches the form.
I am adding a pic so you can see what is linked to what.
View Replies
ADVERTISEMENT
Dec 6, 2013
What I have is a form that takes in information regarding test data. Each test run can record data for multiple requirements. I am able to pull all data fine, however in order to make it easier on the user i was hoping to populate the requirements subform based on a selection of "test group" in the main form.
Commonly run together requirements can fall in to groups. I have a selection box for these groups in the main form and a table that stores these group id's and group setup. Is there a way to autofill the tables records that the subform is linked to based on the selected test group?
View 3 Replies
View Related
Jan 6, 2015
I understand right off the bat if you're reaction is "don't duplicate data!!" -- mine would be too (don't fret, I know my normalization).
I've linked a table in my db to my Global Address Book in Outlook 2007 and, upon entering an employee number as a new record, would like to verify that the number entered is listed in the GAL and then pull in the associated name and location info.
The key is that I don't want this info to rely on the GAL going forward. For example, if an employee leaves or is no longer listed in the GAL, I don't want to lose the employee info (past data is needed for audit purposes). Note: I will be creating a report later to show if there are discrepancies between the GAL and my table, but that's another story...
So, what would be the best auto-fill options in Access 2007?
View 3 Replies
View Related
Jul 1, 2015
I've got two tables, Member & VBS. They are linked (many to one) via the EnvNum. I have a form that has all the information I need for VBS. I was wondering how could I go about typing in the first and last name (each in their own field) and having access find the EnvNum and Automatically filling that in?
I know how to do it with a combo box, but we have over 300 members and usually get over 100 kids for VBS, and the kid may not be registered as a member. I thought about making a form to enter the first and last names, then have a button that would open up the registration form with the EnvNum, FName, and LName fields filled in, but I'm blanking today and can't figure out how that would go.
View 1 Replies
View Related
Jul 25, 2014
So, I have a form and I need it so that when one field is selescted, the other 2 auto fill based on my selection. The form is based off of a Table, "TblClient" and The fields are ClientID (PK), InventoryType, Policy, and DueDate.
I want the user to type in the ClientID, and then once they select InventoryType, Policy and DueDate are autofilled.
I have another table, "TblData" that has the data for InventoryType and the coresponding Policy and DueDate associated with each one. So far, I have a combobox for InvnentoryType with a query for rowsource for InventoryType with the width of these additional columns to zero so they are not displayed in the combo. Then, I added unbound text boxes to my form (one for each additional field) and in the Control Source of those text boxes I put:
In the first unbound text box;
=[InventoyType].Column(2)
This worked for me, but now I realize that I want to give it the option that once these are autopopulated, they can be edited. For example, the policy most of the time is exactly the same for a certain inventory type, but sometimes, a word or two needs to be changed. Is this possible?
View 7 Replies
View Related
Jun 30, 2015
I have a table called tbl_post_staff, within this table I have an id number (autonumber), user id (text) and user full name(text). Then I have a form called ec_main with a combobox linked to tbl_post_staff, but stores its value in a field called officer_is in a table called tbl_extensions. also on the ec_main form is a text box that displays current user.
What I am trying to do is; on my form ec_main; default the combobox (Called officeris) to the staff full name based on there userid that is logged in. how can I do this?
View 12 Replies
View Related
Oct 22, 2014
I have created a form based off of one table. I have added an unbound combo box so a user can select a department's number and would like department name and accountable officer to auto pop/fill based on the dept number selection. I'm not sure what I need to put in the "After Update" in the properties in order for this to work.
View 5 Replies
View Related
Nov 20, 2013
I have a combo box that autofills a text box, this has duplicate values and I want to fill the text box based on the selection of the combo box.
Let me explain:The combobox is Suburb, the text box is for Postcode, the data has multiple matches for example FRANKLIN has a postcode match of 2913 in ACT and also 7113 in TAS.
From the combo box I select the record that matches 7113 but 2913 enters into the text box.
This is my code: In Row source of the combo box I have - SELECT [Australian Postcodes].Locality, [Australian Postcodes].Pcode, [Australian Postcodes].State FROM [Australian Postcodes];
In Event on change I have -
Private Sub Suburb_Change()
Me.Postcode = Me.Suburb.Column(1)
End Sub
how to change this to be based on the selected record from the combo box?
View 2 Replies
View Related
May 22, 2013
I have a table in wich I have stored numbers and i want to subtract them using vba.
example
Table1
ID number
1 20
2 40
textbox(ID):2 texbox(value):5 button(subtract)
So when i click button i want to subtract record with id 2 (40-5=35) and i want the new value to rewrite the previous one in the table.
result:
Table1
ID number
1 20
2 35
I want to know if it's possible to do this in vba.
View 8 Replies
View Related
Jun 28, 2015
I have an inventory access program that a sales outlet uses.
Since the barcodes of the same group of items are always changing, I want to figure out how I can scan all related items into one textfield, where at selling point, any item code can serve for that group without recording each one differently.
View 4 Replies
View Related
May 21, 2014
I'm looking for a way to have a text box auto fill based on the selection of a combo box on the same form. I cannot use the method i find all over the internet of using multiple columns in the combo box and basing the text box on that because the combo box already has multiple columns being used to determine its own possibilities and other combo box possibilities.
I would really just like the text box to work like this, but im still kinda inexperienced in VBA...
If combo box is "F004-001", then text box is "237"
If combo box is "F004-003", then text box is "280"
I know how to add in an "after update" thing, but i do not know how to do If/then statements.
View 1 Replies
View Related
Jun 8, 2007
Hi All,
Although familiar with CR, SQL and other such things. I have never had cause to use Access all that much.... Until Now!
My problem is easiest explained by my requirements....
I have a db table called Source. The data for this Table is populated by a form called Technical. Technical containes a series of fields (SO No, SO Line No, WO No etc etc). Some of these fields are lookup fields linked directly to the SO_Header Table in our main ERP software via and ODBC connection. The result is the SO No field is populated with a list of Sales Order No's as they exist within the ERP software. Within the Technical Form I have also the Customer Name.
This is where the problems begin. Within the ERP software we have two tables which I need to use: SO_Header and Customer. The SO_Header contains all the Sales Order info and the Customer table contains all the customer info. What I need to do is populate the customer name field in by db with the relevant customer based on the SO No chossen. However the Customer Name does not exist in the SO_Header table. Instead both the SO_Header table and the Customer tables contain a field called Cust_Code.
Now if I wanted to link these in Crystal Reports I would link from the SO_Header table to the Customer table using the Cust_code field. This would give me the corresponding Customer name based on the Sales Order No.
How can I get the correct Customer Name to appear automatically in my Access form based on a SO No chossen by the user?
I would realy appreciate any help on this! If you need me to clarify anything please ask.
Thanks in advance!
RobV
View 1 Replies
View Related
Dec 12, 2013
I decided to link Excel files and all is running fine except when I run a query on the file I get about 1,041 blank rows before my data is displayed in the query's datasheet view or any report based upon this query... the data seems good but why the leading blank rows? The data in the linked Excel sheet does not look like this and another Excel file's query looks fine and they seem set up identically!
View 2 Replies
View Related
Aug 31, 2007
I am trying to build a Form that will show an estimate (then eventually will be moved to a project if customer and employee aggree to price and project) in a Form F_Estimates is a M_Customers(Customer_ID) (Based on a Table) and thier info in a Subform. Also is the "projected costs" from parts out of the Parts(Part_ID) (Based on another Table) in a second Subform as a list that I need to calculate $$$ in
(Dang that still sounds evil and definately NOT understandable even after edit... so)
Here's some basic info
Tables
EstimatesandParts - Table
EstimatesandParts_ID : Autonumber
Estimate_ID : Number
Part_ID : Number
Parts - Table
Part_ID : Autonumber
PartNumber : Text (not a number due to some part#s have letters in them)
PartName : Text
Unit Price : Currency
Description : Text
Estimates - Table
Estimate_ID : Autonumber
InvoiceNumber : Text (again can have letters in it)
EstimateDate : Date/Time
EstimateTime : Date/Time
Employee_ID : Number
Customer_ID : Number
ProblemDescription : Memo
Customers - Table
Customer_ID : Autonumber
FirstName : Text
LastName : Text
CompanyName : Text
Address : Text
City : Text
Province_State : Text
Postal_ZIPCode : Text (CDN Postal codes are letter num letter...)
you can see the link table in the EstimatesandParts Table
Now I want to use that link to populate a subform in the F_Estimates form
Forms
SF_Customers - SubForm
(all boxes atm are text boxes on this form till I figure out the Parts section then will use same base for this so I can pick any customer in the database to be the customer for this estimate. Also will have ctrl button for making new customer with customer form and a refresh on Focus Gain bit of code)
FirstName
LastName
CompanyName
Address
City
Province_State
Postal_ZIPCode
SF_Parts - SubForm
Default View -Continuous Forms
(want it to be a list of parts that I can grab prices and descriptions from then in a bit of code to calculate a cost of parts)
Part_ID : Combo Box
Control Source - Part_ID
Row Source Type - Table/Query
Row Source - SELECT Parts.Part_ID, Parts.PartNumber, Parts.PartName, Parts.UnitPrice, Parts.Description FROM Parts ORDER BY Parts.Description;
(Pulls info from the table Parts for input into a list of parts to be used on that project)
PartName : Text Box
UnitPrice : Text Box
(here's where I run into problems due to the fact that the form is not based on the parts table but rather the link table EstimatesandParts so I can't propogate the info to the 2 other text boxes, ps I dont care if they cant be text boxes and have to be linked or some other type I'm not "set" just need to find out how to make it work )
(have tried a couple things to complete this task)
Me.txtPartName = Me.Part_ID.Column(2)
Me.txtUnitPrice = Me.Part_ID.Column(3)
(works AWSOME ... for ONE ROW then propogates the second selection to the first and second and third selection to first second and third and so on ...)
(tried to make control source for the txtPartName to)
=Forms!Parts!Partname
(Doesnt exist .. akkk, cant use ActiveForm either as it doesn't focus on the SubForm but the MainForm ... cry)
F_Estimates - Form
Estimate_ID
InvioceNumber
EstimateDate
EstimateTime
ProblemDescription
(all basic Text Boxes)
Employee_ID
Customer_ID
(Combo Boxes Select Customer and Employee from list of present ones of each)
SF_Customers
SF_Parts
(Both SubForms on the main form)
Now this is an Exerp from my entire Database I like to work on one small problem at a time and I have made this its own little database till I figure out the problem then I will bring the info I learn back into the rest of the database and go from there ...
Hope you can help I have a feeling I will need to make a recordset and go from there but I'm just not able to wrap my head around that for some reason
Thanks in advance for ANY and ALL help that I get from here
View 10 Replies
View Related
Aug 3, 2005
I have a data entry form for Table-A. After I enter an account on the form, I use the account to get a value from a different table and put that value in another combobox. I tried using a SetValue to fill the combobox. I put the SELECT statement from a query in the Expression parameter. But Access doesn't accept that Expression and produces an error message about "Forms" not being a field. This has got to be a common action in forms, so there must be a better way to do this.
View 2 Replies
View Related
May 24, 2007
I'm putting together some databases, and there are some minor differences between each, but its fine now.
Now all thats bothering me, is that 1 of the fields in a table is a text field containging ONLY " y " or nothing. (thats the letter 'y' by itself or nothing.)
I just want to know if theres a way to convert it to checkbox (yes/no).
obviously, with large numbers of data entries, i wouldnt want to check each box manually correspondingly to the 'y' or lack thereof.
any help would be greatly appreciated.
View 3 Replies
View Related
Oct 12, 2006
Is there a attribute for setting the max amount of characters in a textfield, I have thought about adding some code in the on keypress event, to lock the textfield once the required amount of characters has been reached, but I was hoping there would be a more simple way.
View 5 Replies
View Related
May 24, 2013
I'm creating an accounting database for my use at work. I order goods and services from a multitude of vendors, using varying payment methods, and at last count, 8 different accounts. The time I'm spending on repetitive entry into excel spreadsheets has forced me to sit down and make an access database to track everything.
Right now, the following:
1) Table named "Accounts" with two fields - Account # and Account Description. Account # is PK.
2) Table labeled "Orders", which I'm going to have the top-level information for each order (order #, Account #, Account description, + others that don't matter here). I have another table for the order details (product #, description, price...).
3) Relationship between "Accounts" and "Orders" is one-to-many, enforced referential integrity, cascaded update.
For my order entry form, I want to enter the account description, so I set up a combobox. But, for my paperwork, I am going to need the account # to print when I do a report, and for future flexibility I want that field to remain in the "Orders" table.
I know my accounts by name, not number, and I want it set up so that when I select, for instance, "Supplies Account" for the description on the form, the Account # field on the Orders table is automatically populated with the account # that correlates to that description.
Is there a way to tell the table to auto-fill this entry?
View 7 Replies
View Related
May 8, 2006
I have a database that has a field [country] that stores the numerical id of the country from a table of countries. The student table also has a field called [mother tongue] and it seems to me that this is duplication.
I created a simple query based on a link table that tells me the country and its associated mother tongue.
SELECT [-LOOKUP-ALL-Country-LinkToMotherTongue].Country, [-LOOKUP-ALL-Country-LinkToMotherTongue].MotherTongueLinkNo, [-----LMotherTongue].Language
FROM [-----LMotherTongue] RIGHT JOIN [-LOOKUP-ALL-Country-LinkToMotherTongue] ON [-----LMotherTongue].[Reference no] = [-LOOKUP-ALL-Country-LinkToMotherTongue].MotherTongueLinkNo;
It seems to me to be an overhead to store in the student table the mother tongue id.
How can I create a text lable that dynamically shows the mothertongue as i move over records?
that way the user can see the students mother tongue but I only store the country table and link table to mother tongue. as opposed to a mother tongue entry against all students.
regards in advance
Peter
View 2 Replies
View Related
Mar 5, 2013
My database has four fields: ItemName, ItemNumber, Description, and RelatedItems. I would like to create a query that will search every Description in the database and return that data in the RelatedItems field. The query should fill the RelatedItems field with a list of every ItemName and ItemNumber that contains the ItemNumber of the current record.
View 2 Replies
View Related
Feb 9, 2015
Access 2010. The first table is called Clients.The Primary Key field for the Clients table is an AutoNumber field called ClientID.The other two relevant fields in this table are ClientFirstName and ClientLastName. The second table is called Contacts.In the Contacts table is a foreign key field, bound to the ClientID field from the Clients table, and also named ClientID.
On the Contacts table, the ClientID field properties are set on the Lookup tab as follows:
Display Control: Combo Box
Row Source Type: Table/Query
Row Source: SELECT clients.ClientID, clients.ClientFirstName, clients.ClientLastName
Bound Column: 1
Further, in the Row Source's Query Builder, ClientFirstName and Client LastName both have Ascending selected as Sort criteria.
Everything works as intended: When entering data into the the Contacts table (actually, the data is entered via a form built from the Contacts table) the data entry person can click the drop-down on the combo box for the ClientID field, scroll through ClientID records, and see unique ID numbers sorted by first and last names. And the actual data for the field is stored properly as the unique ClientID number.
When entering ClientID data into the Contacts table (or form), is it possible to enable autofill based on ClientFirstName and ClientLastName, rather than ClientID? For instance, let's say we have a few clients named Joe Smith. It would be great to just start typing "Joe Smith," and have the field autofill the ClientID number for the first client named Joe Smith. The intention is to make data entry a bit quicker.
View 3 Replies
View Related
Feb 13, 2006
Hi,
I've been working on a database to keep track of employee time off, It consists of the main table, a employee table, and a department table.
I had a form that our admin uses to enter the info for each employee.
They would select the name of the employee from a drop down, and then select the department that employee is in from another drop down. then they would select the days off and reason ect. Then when finished they would hit submit and this would be entered into the main table.
Well they just asked if it would be possible to make it so when they enter the employee's name, that the department would automatically be filled in for the employee.
Is this possible? I'm trying to think of how to do it, but not coming up with anything.
Thanks
Chris.
View 1 Replies
View Related
Jan 23, 2013
In my database I have a table of customers and a table of orders (where many customers have more than one order, so the primary keys for each table are customerID and orderID).
In the orders table, the first columns are:
OrderID CustomerID Customer Forename Customer Surname
I need my table to auto fill in the customer forename and surname based on the selection of customerID (the names are saved in the customers table).
I already have a lot of data filled in, so am looking ideally for a way to fill these name columns without having to re-input all the data.
View 2 Replies
View Related
Feb 9, 2012
How do I get access to auto fill a text (supplier)? I realize that for a new supplier I would have to input the supplier name, however my question is what should I do for Access to enable auto-fill so that the next time I have to input that supplier it would auto fill for me. This is happening in a single column.
For example: In the supplier column, I typed Dell in the first row, Apple in the second row, HP in the third row. Now when I start typing 'Apple' in the fourth row, I want it to autofill 'Apple' because I have already input that once.
View 7 Replies
View Related
Jul 12, 2005
Hi,
I'm not even sure if this is possible to do (I havn't found anything on the Net yet), but I have a Form displaying Customer information, and the vending machines that customer has.
The main form (frmAccount) has 2 SubForms:
1) AddressSubForm (is a Datasheet), listing the many addresses the one account has.
2) VendingMachineSubForm (is a Continuous Form) and displays the machines related to the account.
What I want to do is select an address in the datasheet, and have the MachineSubForm populate with what machines are located at that address. Can this be done?
The Machines and Addresses link by AddressID. Both subforms are built on queries.
Thanks for any help/insight!
Mike
View 14 Replies
View Related
Apr 16, 2012
I have a database in which we are trying to have a field "Headcount" automatically fill with the correct value based on information in multiple fields. The "Headcount" field will be based on about 6 or 7 rules. Most of the rules i can figure out, but im having trouble figuring out what the best way would be to search for a single individual's projects when they are on more than one project at a time. I thought about using a counter of sorts to count how many projects someone was one, but how do I pick them out of the entire table once i have found out the number of projects? Would a for loop work best or just many if statements?
View 5 Replies
View Related
