I have a date control and on the Click event I run the following code. Trouble is the Date Control stops working, ie you can't change the date after one click ?
CODE.
Private Sub Calendar7_Click()
weekofyeartxt.Value = DatePart("ww", Calendar7.Value)
End Sub
I am using an active x control that when you right click on it, it automatically pops up an "About" box showing information about the control. I wouldn't object to this, but I need to use the right mouse down event for another purpose in my program. So far I have discovered that the code I put in the the event works, but only after the "About" box pops up. Is there anyway to cancel or prevent the popup? The reason that I need the right mouse down event is because is that I am already using the left mouse double click event, and I can't use the left mouse down event because then it always fires before the left mouse double click event. This control doesn't have any single click events. Ideas?
View 2 Replies View RelatedI am trying to allow a calendar to search through a text box with a large amount of data in which will have headings using the date so i wanted to use a calendar search. Hopefully this will be be like the find function in word where you type (or in this case select a date) then click search or next which will take you to that specific date.
View 14 Replies View RelatedDont be overwhelmed by the following, but it may require some extensive thought and I dont expect everyone to understand....
I want to have a unbound form control a subform. On the form I have an unbound text area entitled txtDate. In this area it displays the current date being viewed. I have put left and right buttons on the main form that will add (+1) one day to the date being shown and subtract (-1) one day from the date being shown. I want to conrol it though the "On Click" but I dont know what to enter in the "On Click" field that will allow me this. The reason is, co-insiding with the previous, when the date is changed, the subform is also changed to a new day. Therefore instead of displaying 24 hours of today, you can view 24 hours of yesterday, tomorrow and so on. See, if one is to set the onclick to be: Me.txtDate=Me.txtDate-1, or Me.txtDate=Me.txtDate+1, it calls for a custom macro and I dont know why. I know it somehow resides in some similar command set up.
I also need to know how to make the subform bound but continous, and what exactly does that mean?
Anyone care to offer some assistance? :confused:
I work for a company that manufactures home appliances & electronics. When those products fail within the warranty period, we are obligated to repair the units for the customers.
We have around 200 factory technicians who make those repairs. Each tech is able to make approximately 8 repairs each day. We have a dispatching system that assigns the repairs to the techs based on their availability each day. But the problem is that we have to manually enter and adjust the schedule for all 200 techs every single day, and this takes a lot of time. And of course technicians get sick, take vacation, etc, so we have to adjust the schedule so no techs will be assigned calls when they're off.
The problem: For example, currently when a technician takes off for 2 weeks, the user has to enter 14 individual records for the tech, which is somewhat time consuming. What I need is to program a button click event to determine the two dates (startDate & endDate) and append multiple records from one single entry in the form for each date in between and including the two date fields.
I know I'll probably need to create a loop that will loop through the two dates on the form and append a record for each day, so I can then cross reference the dates to the master schedule dates to make sure that no availability is opened for the techs taking time off.
I have a form with a combo box that is populated by (1) a union query, and (2) a make table query from that union query. The reason I have both is because I want to have an autonumber and I can't do that directly in the first query.
So any time I update any of the tables that are in the union query, then go back to the form, i want the the combo box to update the list which means I have to run (1) and then (2) to repopulate the combo box with the updates.
Making a small database, Got 1 Table.
1. ContactDetailTable
Got 3 forms.
1. ContactIDForm
2. ContactInfoForm
3. NewContactFrom
In ContactIDForm it contain 1 textbox name 'TextBox' with Button Name 'Btn'
In ContactIDForm there is only 1 Text Box ContactIDTextBox and 1 Button. User Enters ID in TextBox and On Button Click Event it should check data from TextBox in Table name (ContactDetailTable) in field ContactID and if there is record matching, ContactInfoForm should Open else NewContactForm should open with ContactIDTextBox value in it.
I am having a problem in my access database. I have a a form called Compliance Register. When this window opens it lists all of the requirements of a particular department. There is an ID and Source ID(this field can contain the same number such as multiple 17's). The descriptions match up to what is supposed to be shown. However when I double click on the item, it brings up a Compliance Status window. This is where things go wrong.
It shows the status listed as the first Source ID that matches the number, but does not seem to also be matching up the ID as well It must match both ID and Source ID since Source ID can have the same number multiple times down the list..
Here is what is under the Event Procedure for the double click.
Private Sub ListRequirements_DblClick(Cancel As Integer)
On Error GoTo Err_ListRequirements_DblClick
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "Compliance Status"
[Code] ......
Under stlink criteria, i need it to not only pull the ID, but it has to have a "AND" Source ID. I need it to pull the record that matches BOTH numbers.
I have a continuous form with a button 'Cmd1' & a textbox 'txtMail' which is set to visible no.
When the user clicks Cmd1 - then txtMail becomes visible.
I can do it using vba on the buttons click event but when it executes txtMail for all the records become visible.
How do I use a button's click event on the form's current record - Private Sub Form_Current() so that when the user clicks Cmd1 on the current record only txtMail for that record becomes visible.
I'm using Access 2007.
I want to add an event on Form Header when double click it will filter the values, which i did with macro, but could it happen on second time double clicking it it refreshes whole as original?
View 2 Replies View RelatedI have created a form to select multiple records for a transmittal report. I added a button to the form which I would like to open the report to view the current record. In the On Click event I added the following code:
Private Sub cmdPrint_Click()
Dim strWhere As String
If Me.Dirty Then 'Save any edits.
Me.Dirty = False
End If
If Me.NewRecord Then 'Check there is a record to print
MsgBox "Select a record to print"
Else
strWhere = "[TransmittalID] = """ & Me.[TBLTransmittal.TransmittalID] & """"
DoCmd.OpenReport "RPTDwgTransmittal", acViewPreview, , strWhere
End If
End Sub
The debugger keeps highlighting the row above shown in red. I've used this same code before on other forms and it worked but not sure why it isn't working this time. The only difference with this form and previous ones is that this form contains a multiple values combo checkbox (hope that's the correct term). The query that the report is based on changed the names of the field names so that TransmittalID on the form is TBLTransmittal.TransmittalID in the query.
I've tried the code with and without the extended name but each time the "Do.Cmd..." is highlighted.
I'd like a confirm dialog to appear on button click, so when the user clicks 'yes', the on click event should continue and when the user click 'no', the event should stop.
View 2 Replies View RelatedI would like to select a record on an already open form called "form_candidates" using a search facility but can't get it to work.
In "form_candidates" the data settings are set to "yes" (filters/edits/deletions/additions) and data entry is set to "no". On opening, the form is set to go to a new record.
In this form I have a button that opens a record search form so both forms are now open. I enter the first few letters of the surname into a text box, press a button and the listbox is populated.
In the doubleclick event of the list box I have the following code:
Dim CandID As Integer
CandID = Me.List4.Column(0)
DoCmd.OpenForm "form_candidates", acNormal, , "forms![form_candidates]![Cand_ID]=" & CandID
So I double click on the record, the candidate form is being filtered but the record isn't being shown.
I am using a continuous form and would like my users to be able to change a field background color to a light red by double-clicking. The user would also be able to change it back to white by double-clicking again.
The code I am using (below) changes the field background color for all records. I need my code to only change the field color of the current record and cannot seem to find how to do that. The field name is [System_CurrentStatus].
Private Sub System_CurrentStatus_DblClick(Cancel As Integer)
If Me.System_CurrentStatus.Backcolor = vbWhite Then
Me.System_CurrentStatus.Backcolor = RGB(234, 154, 160)
ElseIf Me.System_CurrentStatus.Backcolor = RGB(234, 154, 160) Then
Me.System_CurrentStatus.Backcolor = vbwhite
End If
End Sub
Code:
The expression On Click you entered as the event property setting produced the following error: Procedure declaration does not match description of event or procedure having the same name
Now this is the error message that I am constantly getting from any command button I hit on a certain form. Here is the code of the form.
Option Compare Database
Option Explicit
Public inputCSV As String, ORG As String
Private Sub CopyToTableBt_Click()
Debug.Print "Sub Execute calling ImportCSVForConfederation inputCSV="; inputCSV; " ORG="; ORG
ImportCSVForConfederation Me.CSVs, ORG
[Code] ....
I changed the names of the buttons, reconstructed the code under those names, went to the modules and changed names, made sure that a sub o function name is not duplicated in the project... But helas the error is still there. It used to work and suddenly does not work.
How can I move to control on form when user clicks on another control on same form? In other words... have set validation on controls and unless I disable all the other controls on form until I need it enabled, user can click on other control and get out of the validation sequence. Need to send user back to control they were on when they click on a different control elsewhere...
View 3 Replies View RelatedI have a listbox on a subform (or a subform within a subform).
When it is clicked I want all other listboxes to unselect.
There may be listboxes on the mainform, on other subforms, on other subforms of subforms.
I imagine I'm looking at a recursive function of some sort, but I'm not entirely sure of syntax to identify parent and children forms...
pseudocode so far:
loop all controls
if control = listbox, unselect all
if control = subform - recurse: loop all subform controls
if control = parent... err... Fail.
On a form I have a pair of controls, Price and PriceInUSD. If the user enters a new value into the Price field, then its AfterUpdate event fires, which looks up the relevant exchange rate and updates the PriceInUSD control accordingly. That all works fine.
Now in some circumstances (if a checkbox elsewhere on the form is checked), I generate a modal dialog box asking the user to confirm that the Price value is correct, or enter a new value.
That modal dialogue box's Enter button's On Click event then updates the Price control before closing the dialog. That bit works fine, too - but I had thought that this update of the Price control would fire its AfterUpdate event - but it doesn't.
So, my basic question is : do Control events only fire in response to user input, and not to programmed changes ?
I have a main form that holds a tab control with a number of sub forms. One of these subforms has a pop up form for adding new records to it. After closing this pop up form I would like to initate code on the sub form where the new record now will appear. One of the things I like to do is simply to set focus to the record the user just added.
My problem is that I cannot seem to get any event to trigger in this setting (bben trying more or less all). If I understand things right the fact that I am using a pop up form and the fact that I am using a tab control both seem to interfer with the Activate event and making it passive.
How I can trigger code on the sub form (after closing the "Add New" pop up form)?
I have a simple application where a user clicks on the name of the person he wants to update from a drop down box.
The record is then retrieved and the fields are filled on the form.
The user will then enter a value in the # in household field.
The user is then required to click on the save button to write the record for this person.
I do not have strong users and they invariably forget to save the record and go on to the next person, resulting in the record not being updated.
I coded a message box as part of the save button which displays "person was successfully updated" and then instructed the user to make sure that they see this message before they go on to the next person. They still fail to update correctly.
My question:
Is there a way when the user selects a person from the drop down box and it is loaded on the form, to warn the user that they have NOT updated this person, before they go to the next person?
I don't know what else I can do with these users. They are all volunteers and elderly and the application is for a Food Pantry.
I have validation on a checkbox on a sub form and after the validation fails and the cancel = true is executed in the before update event, I am unable to select the checkbox on the form. Access will not allow the selection. my subform is called frmContactType so hopefully I am referencing it correctly:
Me.frmContactType.Form.chkAssociate
I have an Access 2010 form within my database in which I have a series of 8 tabs on a tab control. I am the only user who will have access to these tabs. I want to require a password in order to permit access to the tabs. The very first tab on the tab control works as a cover tab. There is no relevant information for anyone to view...only a graphic.
How to code the "on change" event of the tab control.
I am new to access and I recently encountered a double click issue
My form loads perfectly on double click event but it shows the first record instead of selected record.
My search is based on a PersonID but each PersonID has different WorkID that I wish to display on double click but it always shows the first WorkID instead of my selected record
I have tried changing the filters in the form properties but it still doesn't work for me.
Here's my code:
Private Sub SearchResults_DblClick(Cancel As Integer)
DoCmd.OpenForm "WorkForm", , , "[PersonID]=" & Me.[Searchresults], , acNormal
End Sub
[Searchresults] draws information from my Query
Query information:
PersonID... WorkID... Type......Location
1234..........1............Paint .....Address A
1234..........2............Electric...Address B
1234..........3............Floor..... Address C
I'm working with a database with employess info in access, When I click on an employees name in a form, I want to fire off another form with there info, what I have now it does nothing.
View 4 Replies View RelatedI have a list box control on a form and i'd like to set up a right-click property. Can this be done at all? When I open the Events tab on the property window..there is no right-click property :confused:
Thanks!
Hello,
How can you disabled a click event on a text box ? I don't want to use ENABLE = false because the background of the texte box comes gray. So, any alternative solution?
Thanks,
Le