Forms :: Date Count Down Timer
Jul 18, 2013I want a count down timer up to a certain date (30th Aug 2013) in days how do I do this and have is visable on a form?
View Replies
ADVERTISEMENT
Forms :: On Timer Event Execute Only Once
Oct 1, 2014Got a problem here:
Timer Interval = 5 Seconds
Private Sub Form_Timer()
My code here..
End Sub
The code repeats every 5 seconds, what I want to do is to execute it only once.
Forms :: MsgBox To Display Using Timer Event
Aug 19, 2014I have a form (MS Access 2003) that has a button that when pressed, assigns the current time to field [Time1] using
Code:
Me.Time1 = Now()
I have another field [Time2] that adds 15 minutes to [Time1] using the following in the Control Source field
Code:
=DateAdd("n",15,[Time1])
I was wanting to use these to force a message box when the system time reached Time2 and tried the following code on the Form ON TIMER event (Interval at 1000 ms) but it does not work.
Code:
If Time() > Me.Time2 then
MSGBox "Time to show message"
End if
I tried putting in a manual time in the VBA such as:
Code:
If Time() > #2:05:00 PM#
MSGBox "Time to show message"
End if
which worked. So, I am guessing there is something with my orignal code using Me.Time2 that is causing the problem.
Forms :: Count Age From DOB To Admission Date
May 12, 2013How to count the age from DOB to Admission date.
Please see the attachment and if possible add your formula.
Forms :: Count Weekday In Given Date Range
Mar 21, 2014I am looking for Access VBA code to count number of Day Name in given range
E.g. March 01, 2014 to March 31, 2014
Mon = 5
Tue = 4
Wed = 4
Thu = 4
Fri = 4
Sat = 5
Sun = 5
Forms :: Timer Event Causing System Resource Exceeded
Dec 9, 2013I have Access 2010 and have made a small system that creates a table as a result of an query based on linked tables. The result is approximately 40 records that are grouped in 4 different priorities where each record has a status of green, yellow or red.
By using the timer event I want to loop through 6 different forms starting with the overall view and herafter priority 1 form, priority 2 form and so on. When the last form has been displayed start over again. Loop for ever until stop button has been pushed on the first form.
The timer is set to 15000 on each form, when I open a form the first thing that happens is that I close the previous open form.
After the system has looped 4 times it gets "SYSTEM RESOURCE EXCEEDED".
I have used 3 days on the internet to try to get a solution on my problem with no luck. I have got so far that it must be something with the timer function. Since if I run it manually (open form, close previously, open next form etc) then no issues.
I have the latest service pack for access 2010.
Forms :: Count Only Rows In Specific Field With Date
Dec 12, 2014I have an access forum that I need to have a textbox count how many rows have dates in my "Ship_To_Date_HP_" field
View 6 Replies View RelatedForms :: Timer Event - Wait Until Form Fully Loaded Before Visible
Nov 7, 2014I have tried using a timer event to not show a form until it is fully loaded, to no avail.
Code:
If CurrentProject.AllForms("FONNewEdit").IsLoaded = True Then
Me.Visible = True
Me.TimerInterval = 0
End If
I have tried using the onload, onopen but the form still displays before being fully loaded.
Forms :: Closing Opening Form With Timer Then Opening Main Menu
Apr 7, 2014I have a Form opening from Access Options. I would like to close this Form using the Timer. The following is the code I have used but it is not working.
Private Sub Cover_Page_Form_Load()
OpenTimer = Timer
End Sub
Private Sub Cover_Page_Form_Timer()
If (Timer - OpenTime) = 5 Then DoCmd.Close acForm, "Cover_Page_Form", acSaveYes
End Sub
Next question. If I can get this to work can I then use a DoCmd to open new Form within the code above or do I need a new process.
First Timer
Apr 14, 2008Hello Administrator, contributors, experts and friends!
I am excited to join this blog for the very first time. I am new to MS Access but learning every day and doing very well. I am in process of buiding an Issues list and because of that you will see lot of me with tons of questions. First most, I will search this forum to find the answer otherwise I will be posting questions. Thanks for the opportunity to participate in this forum.
Timer On Tab Pages
Nov 13, 2007Hi im trying to see if there is a way to put a timer in tab pages. so that when the time expires it changes to another tab. I have it working fine with the command button. I have like 20 tabs all hidden until the user clicks the cmd. Now is there a way to put a timer? I know that i can do it with the Form_timer, but that dont seem to work with tabs.
thanx
Form Timer
Mar 30, 2005I’m not sure if this is going to be more of a VBA question but at the moment for me it’s a form thing.
Is there any way i can have a form automatically close and load a different form after an amount of time since it was loaded has passed.
I have a form and i want it to lose after 30 seconds of opening and load the next form.
I’ve had a search around access help but that really wasn’t too successful and I found nothing like it on these forums.
Any help or advice is greatly appreciated. Thanks,
Crisp.
Timer Event
May 24, 2005I'm looking for a code that close my databse when a user is unactive for a set time.
I've search the forums but nothing workked for me
Is there someone who already have a code for this or maybe can help me?
thanks in advance
Timer Function
Mar 12, 2006Hi guys, im looking to incorporate a timer function into my database.
Basically at the moment students can takes test in the 'quiz' form - id like a function that starts a timer once its opened, and then display the time taken in a message box when the test is finished.
Any ideas on how i should go about this would be much appreciated,
Ross
Timer Code
Oct 11, 2004I wrote the following simple code in a form's event procedures, in order to create a splash screen for my application. The form remains open all the time, I meant it to close after cnt>10. I checked with message boxes and it seems that cnt never increases to more than 1. Any ideas why ?
Private Sub Form_Load()
Dim cnt As Integer
Me.TimerInterval = 1000 'timer interval 1 second
cnt = 0
End Sub
Private Sub Form_Timer()
Dim cnt As Integer
cnt = cnt + 1
If cnt > 10 Then
Me.TimerInterval = 0
DoCmd.Close acForm, Me.Name 'here I want the form to close
End If
End Sub
Where can one find what terms such as acForm, Me.Name, acPreview etc mean ?
Modules & VBA :: How To Stop Timer
Aug 2, 2013I tried this but dont know how to stop the timer...I want to run the code that changes the Form color but want to be able to stop the Timer and reset it to start over..Will this timer work? Almost like an auction timer. But want to be able to reset the code at any stage...
Code:
Public Sub ExcelTimer()
Dim PauseTime, Start, Finish
[code]..
SQL Count By Date
Jul 8, 2005I have a query that uses 2 Fields from a large table. Cashier and Date. The problem I am having is I would like the select a time frame, a Start and Stop date, and count how many times the cashier comes up for that day.
Sounds easy, I would think so but having a problem. The dates are automatically imported into the large table as format 01/01/2005 12:00pm (Can't do anything about this).
When writing the SQL and the Count function, it is using the time as well in its calculation, but I simply want it to count on the date only. So unless a cashier existed exactly in the table as 01/01/2005 12:01pm, 01/01/2005/12:01pm it only counts it as a total of 1, instead of twice for that day.
I simply want the SQL function to read the Date field as 01/01/2005, and drop off the Time. I can format it, but only changes it visually and the SQL statement still sees the time.
Any help would be appreciated.
I found this code on the boards here, almost what I want but does not group each Cashier by day and total, it does the total of all cashiers for that day. I need the Cashiers sorted for each day, and totalled.
SELECT Format([Date1],"dd mmm yyyy") AS Day1, Count([ Cashier1].[Cashier1]) AS CountofCashier
FROM CashierQ1
GROUP BY Format([Date1],"dd mmm yyyy"), Format([Date1],"dd mmm yyy")
ORDER BY Format([Date1],"dd mmm yyyy");
Count Per Date...
Feb 17, 2005Hello everyone, I have a pretty simple form regarding posting message on a certain forum....
The form contains nick mane, date, hour and few more stuff regarding the post.
How do I create a query that will count all of the posts that I typed in for a specific date?
I tried count but it won't work.....
Question About Setting Up A Timer Alert
Sep 12, 2007Hi everyone, I quite new to access, so I would like to ask for a little help. Is it possible to create an alert in a database related to date and time. Shortly the user needs to be alerted when a certificate expires on a specific date. Is it possible to do that in Access?
Thank you anticipated,
Bye,
Fehermaci
Simple (?) Timer Event Problem
May 24, 2005I created a form to list the number of customers in my lobby. In the Form Footer I placed a field to count the number of customers waiting (Name: CC1, Control Source: =Count([LName]). Works fine.
I want a Beep on the form if the customers exeed 5. I placed the following code in the Timer event but I cannot get the event to work. I believe it has something to do with the field name but I'm unsure. Any help would be appreciated.
Private Sub Form_Timer()
Requery
If [CC1] >= 5 Then
Beep
Else
End If
End Sub
Skip On Timer Event Cycle
Sep 15, 2005My form is always open and runs a timer event which runs a series of functions and procedures. I don't want to run a certain procedure on every timer cycle, but rather, every other timer cycle.
Any thoughts on how best to accomplish this. I'm having a mental block!
Scott
Problem Whit Timer In Form
Aug 7, 2006Hi
I' am trying to make a form which executes a macro in every minute. I have put the Timer Interval to 60000ms. But now the form executes the macro only once and I want that macro will be executed always after one minute. So how I can make this work? Do I have to make somekind of loop in code or what?
How To Count Clients For A Certain Date??
Jul 29, 2005I have a database with a list of clients, their enter and exit dates. I need to do a query that will count how many clients we have on a specific date. Keeping in mind that clients leave. I can do a query that will prompt user to enter a date. However, how would I count the total number of clients on that date? thanks a lot for any help!
View 3 Replies View RelatedDate Count Query
Nov 1, 2005I have a table that includes client account information. I want to create a query that will select all account numbers where the last updated date is less than or equal to a number specified by the user.
Table (ClientRequests)
AccountNumber LastUpdated
76869 5/10/2005 9:49:38 AM
22151 10/29/2005 10:35:23 AM
so for example: I would like to display all accounts where the differrence between todays date and the LastUpdated date is <=10. Where 10 would be a user defined number.
Hope this makes sence.
thanks in advance
Count Between Date Range
May 8, 2006I am trying to run a query on a table [tblMain]. I have an input form where the user enters a date range. I would like to count the Month to Date Sales. The month would be that of the end date (forms!frmflash!enddate). How could I count the number of sales between the first of the month and the end date? Each record has a salesdate1, salesdate2, salesdate3, salesdate4, salesdate5, and salesdate6. I need to look in each of these fields and count the sale if it is between the 1st of the month and the enddate.
View 3 Replies View RelatedHow Do I Count Date Fields?
Jul 25, 2006Hi there. Im trying to work out how I can count the dates in my database per month. What ive done is created an unbound box with an sql statement
SELECT Count([tbl Main].[Date of Call]) AS [CountOfDate of Call]
FROM [tbl Main]
HAVING (((Count([tbl Main].[Date of Call])) Between #4/1/2006# And #4/6/2006#));
When I select the totals button to count the records 0 are pulled out.
Does anyone know if im doing something wrong here. As always im sure its quite simple..
Cheers