everything has been working perfectly except for date diffs.I am simply using an unbound text box with a date diff as a calculator of sorts, which meets the form's purposes. Everything works fine when the two dates are on the SAME tab using the formula ' =DateDiff("d",[DOB],[date of treatment]) ' entered in the textbox.
The number of days between treatment and DOB pops up immediately.
However, when trying to create a second date diff between two source text boxes on SEPARATE tabs, (i.e. DOB on Tab 1, and date of treatment and the unbound date diff calc box on Tab 2) the date diff does not work unless the form is opened, and closed again. As in, the only time the number of days pops up is if the form is closed and opened again.
This isn't the standard problem with DTPickers & Tab to which I've found lots of references!
I have a form with a Tab control, each page of which has a subform on it. There are several MS Date & Time Picker (6.0) controls on each tab. My problem is this: whenever you change tab when one of these DTPickers has the focus, you then can't type text (into a text or combo box, for instance) on the new tab until you have been into and out of another DTPicker control! (The KeyPress etc events do get triggered though). Once you've selected a DTPicker, you can then select another control and type text in OK.
The forms/controls aren't bound if that's relevant. It may be that the problem is caused by moving between subforms rather than between tabs.
Has anyone else had trouble with this? Is it a bug or expected behaviour (though I can't see why it would be)?
And most importantly, how can I get around it? Hope someone can help.
I want to be able to display the result of a difference between Date/Time values in "HH.MM" format (i.e. yes I want the result in decimals and I don't want Access to round up or down just because it feels like doing it!). I have used the following:
Example 1:
Dim ActualManHours as Long ActualManHours = (txtEndTime.Value - txtStartTime.Value) * 86400 txtActualManHours.Value = ActualManHours
Example 2:
Dim ActualManHours as Long ActualManHours = DateDiff("h",txtStartTime.Value, txtEndTime.Value) & "." & Format(DateDiff("n",txtStartTime.value,txtEndTime. value) Mod 60, "00")
Example 3:
Dim StartTime as Double Dim EndTime as Double Dim ActualManHours as Long StartTime = CDbl(txtStartTime.Value) EndTime = CDbl(txtEndTime.Value) ActualManHours = EndTime - StartTime txtActualManHours.Value = ActualManHours
I've set hyperlinks to a couple of forms using the hyperlink address in properties. All works fine, and I've done it this way because the cursor changes to pointy hand when hovering over.
However, I need to navigate to a tabbed form in a main form.
Is there a way of doing this? I've been searching all sorts, and the most probable is to concatenate the destination?
description##Page1#page2... or something like that?
Is this correct?
What ever I've tried doesn't work, this includes ...
adding the main form destination to Hyperlink Address, and tabbed form in the SubAddress (Can't find main form)
Using the hyperlink builder. (Can't find anything)
I have a form which consists of four (4) tabbed sheets. The first sheet is the main form and the other three sheets are the linked subforms.
Pressing the tab key on the keyboard navigates from field to field in each individual form; however, I would like that when I get to the last field of each form, pressing tab moves to the next sheet or the first field of the next subform.
The problem I am getting is that when I get to the last field of the main form and/or subforms, hitting the tab button creates a new record in the specific form, which I do not want. I want to just tab to the next subform.
I have an unbound form with 2 tabbed Controls on it.On the first Tabbed Control my command button code works but not for the 2nd tabbed control. Although the command buttons themselves work as far as going to the appropriate record.
What I mean by this is that I use code to enable/disable the command buttons depending on what record you are on.
Example: If there is only 2 record, the other command buttons will be disabled, Do I have to refer to the Tab Control ?
I have a tabbed form built in Access 2007. It's a series of about 32 different questions, with some being fill-in, some drop down boxes to select from, some radio buttons to choose a rating from 1 to 5. The reason I used a tabbed form was just to keep things consolidated on one screen where no scrolling was involved. All of the entries on each of these tabs are deposited into the same single table. I have 7 tabs, and all of the fields on the 7 tabs compose a single record in the table.
I have the actual tabs hidden, and instead use a button to switch to the next tab (Continue button at the bottom) once all the fields on that tab have been completed. I have all of the necessary fields set to be required, but Access does not validate the entries until the very end of the survey when they click a 'submit' button that actually saves the responses and returns to the opening splash page to start the survey again.
What I want to happen is for the fields on the current tab to be validated before it lets the user move to the next tab with the continue button. If they click continue and have left any fields blank they should get a message that all required fields must be completed or something similar to that.
I have found a thread here entitled "Form Validation before Moving to another Tab" which sounds similar to what I'm doing, but using the button method to navigate to the next tab, there is no BeforeUpdated event to assign that code to.
I made a form for our office to search data through our MS Access database. It was a big hit, and people started using it. Then came another request to make a new form - to search through another few tables. This was a big hit too.
The same process repeated and now I am stuck with 3 different forms, each with it's separate code and selection options.
How can I combine all of them into one and have 3 different tabs for the 3 existing forms without losing all the coding and software flow that I have already created?
I am modifying an existing form that has some tabbed pages(subforms) in it and I am wanting to know how to add another page. I have created another subform that I am wanting to add to this main form as another tabbed page.
I have a navigation form that has a tabbed form on one of its tabs. The tabbed form has a 'current client' query record source and allows one to choose from a list of current clients and when a client is selected - details relating to client are displayed on various tabs on tabbed form.
I want to duplicate tabbed form and change record source to a query selecting 'exited clients' so I can see same information but for exited clients.
I have created a new tab on navigation form for my new exited clients tabbed form and changed record source by creating a new exited client query but when I change record source on exited client tabbed form it automatically changes record source of current client tabbed form to the exited client query and visa versa.
How to set a single form's property to act as it's own "overlapping window" in a database that is set to use tabbed documents. I want most windows to have the tabbed layout but there are a few that I would like to have pop out and be their own windows.
I noticed that the Northwind database did this somehow. if you click on one of the products from the home screen a form pops up in its own window. I tried reverse engineering it, but no luck so far.
I'm creating a tabbed form in Access 2007, and in the first 3 tabs, when I dragged the field controls onto the form, they stretched to the width of the form and all stacked nicely underneath each other.
Now on the next tab they are coming out as much smaller. I don't want to stretch them to fit as I want them a uniform size and I just want to find how to get that setting back! I've been messing with the anchoring buttons to what seems like no avail!
I'm trying to figure out how many day are between now and a date on my form. I've done a search, but I can't find much that talks about DateDiff(). Here is what I have so far and it's not working. I'm typing this value into a text box on a form. =DateDiff(Day,Now(),"ASSIGNED_DATE_TIME") I want the interval to be in days. Thanks.
I'm trying to find the difference between 2 dates [Start_Date] and [End_Date], however I want to strip out out of hours work, which is [OOH_START] eg, 17:30 and [OOH_END], eg, 08:00. Also I need to strip out the weekends as well.
I need to calculate (in a query) the Actual Time of a job. I have the start date, start time, end date & end time (all separate fields). This seems to works ok by subtracting the start from the end.
Then I need to calculate the Estimated Time (time it should have taken). This is done by taking the Quantiy divided by the Rate-Per-Hour. This seems to work out ok in the Query, e.g., 101000 / 15000 = 6.66667 hours. But when I display this result in a report as a "Short Time", I get 16:00 instead of 6:40. How can I get the correct display? The other problem is that I need to divide the Estimated Time by the Actual Time. This also gives me wierd results - I suppose because one is a decimal format time and the other is a "Short Time" format. How can I get the correct answer?
I'm trying to work out the difference between 2 records both of which have a call out date [bas start date]..basically the structure is
equipment number call number bas start date 12345678 112255 1/7/14 12345678 112256 3/7/14
What i'm after is the 4th column to work out the date diff... in this case 2 days the equipment can be multiple times so i might see equipment number 12345678 - upto 10 times with consecutive dates - all of which i need to know the difference between the current call date and the previous call date..
I have two fields in a table, both containing dates. I would like to write a query that returns the difference between the dates in an year, month, day format (i.e. 26y 2m 3d). If that isnt possible, can the difference be returned as years,days (i.e. 26y 63d).
I have the below query (A). How do I calculate the Day of Therapy as shown in B
A MRN Last Name DOA Service startDate INR Dose WarfID VisitID 12001 Smith 6/28/2013 Warfarin 6/29/2013 1.20 6 mg 10 138 12001 Smith 6/28/2013 Warfarin 6/30/2013 1.20 6 mg 11 138 12001 Smith 6/28/2013 Warfarin 7/1/2013 1.3 6 mg 12 138 12001 Smith 6/28/2013 Warfarin 7/2/2013 1.40 6 mg 13 138 12001 Smith 6/28/2013 Warfarin 7/3/2013 1.40 7.5 mg 14 138 12001 Smith 6/28/2013 Warfarin 7/4/2013 1.70 7.5 mg 15 138 12001 Smith 6/28/2013 Warfarin 7/5/2013 2.00 7.5 mg 16 138 11002 Brown 7/1/2013 Warfarin 7/1/2013 1.00 2 mg 17 139 11002 Brown 7/1/2013 Warfarin 7/2/2013 1.3 4 mg 18 139 11002 Brown 7/1/2013 Warfarin 7/3/2013 1.50 2 mg 19 139 11002 Brown 7/1/2013 Warfarin 7/4/2013 1.8 2 mg 20 139 11002 Brown 7/1/2013 Warfarin 7/5/2013 2.20 2 mg 21 139 1205972 Jones 6/28/2013 Warfarin 7/6/2013 1.0 6.5 mg 29 138
[code]....
What I really want is to calculate the time (# day) it takes to reach a target goal INR (2-3) I have tried DateDiff between DOA (date of admission) and Start date but this obvious won’t work because some patient won’t start on warfarin until later.
Another possibility is to calculate date difference between two rows in same column but I don’t know how For example Pt 1 = It take 7 days to reach an INR of 2, Patient #2 = it takes 5 days to reach an INR 2.2 and Patient #3 takes 6 days to reach an INR of 2.1. Average = 6 days.
