Forms :: Date Range In Dynamic Search

Jun 18, 2015

I have utilised the code on John Big Booty's thread titled Dynamically search multiple fields (Thread #188663) to create a dynamic search feature

It works great however I would like to incorporate a date range filter into the results displayed in the ListBox.

Therefore the results would be dynamically filtered only if they meet the required date range.

The Date range data is on the form in a txtdatefrom and txtdateto textbox.

I have tried to adding a the ReleaseDate field with the following criteria to the query:

Between [forms]![frmSearch]![txtdatefrom] And [Forms]![frmSearch]![txtdateto]

however this has no impact at all.

How would I incorporate this date range into the query or VB Code?

View Replies


ADVERTISEMENT

Forms :: Subform - Date Range Search

Jun 13, 2015

I have a form with a subform which searches the database using multiple criteria using Text Boxes and a search button. One of which is a date range which is entered into 2 text boxes(SDTxt and EDTxt). At first glance the code works. If I enter 03/05/2015 in SDText and say 24/05/2015 in EDTxt and hit the search button(SearchBtn) the correct records are shown in the subform (Office Subform). But if I enter 05/06/2015 in SDTxt and 13/06/2015 into EDTxt not only does it show the records between the 2 dates but also all records from May. I have put on a cut down version of the code which just shows the date range search.

Code:
Private Sub SearchBtn_Click()
Dim strWhere As Strin
If IsDate(.SDTxt.Value) And IsDate(.EDTxt.Value) Then
strWhere = strWhere & _

[code]....

View 3 Replies View Related

Dynamic Allocation Of A Date Range

Jun 7, 2005

Is there a way to dynamically allocate a certain range of days if I know a start day?
I have a form where I have a date called startofproject and I want to allocate all work week days from that start date + 90 days.
I’m assuming it should be some sort of make table query that will delete all data in it and create a whole new range of dates when I run the query again.
Is there a way to do that?
Thanks.

View 2 Replies View Related

Date Range Search Problem

Mar 2, 2005

Scenario: The code below allows me to enter a date range in an unbound form which then opens another form based on the date range. If I enter only one of the dates (the beginning or the end) and not the other. I have a message box display asking for the other date to be entered.

Problem: The message box displays correctly but the secondary form still opens because my open form code is separate from the verify dates code. I can see the problem but I can't think how to fix it.

Desired Results: After the message box appears and I click OK on the message. I want the secondary form not to open at all.

***********CODE SNIPPIT************

'Build the wherecondition to use in the OpenObject method.
If Not IsNull(txtTxPrID) Then
strWhere = strWhere & " AND TxPrID = " & txtTxPrID
End If

If Not IsNull(txtSSN) Then
strWhere = strWhere & " AND SSN Like " & "'*" & txtSSN & "*'"
End If

If Not IsNull(txtAddDateBegin) And Not IsNull(txtAddDateEnd) Then
strWhere = strWhere & " AND AddDate between #" & txtAddDateBegin & "# and #" & txtAddDateEnd & "#"
Else
DoCmd.CancelEvent
Beep
MsgBox "Please enter both dates", vbInformation, "Incomplete Search Criteria"
End If

'Open Form based on the contents of strSQL.
stDocName = "empfrmTaxPayerInfo"
DoCmd.OpenForm stDocName, , , strSQL

***********END CODE SNIPPIT************

Thanks in advance
Shel

View 4 Replies View Related

How To Create Dynamic Search Forms?

Jul 28, 2006

Hiya guys, I need to create a form that works exactly in the same way as a query works, so there's a criteria text box on the top of the form and a list box displaying all results. I know a query does this but i need a user friendly way of displaying this information.

The search is for customer names and i need to display this information in a user friendly way because my users will need to search the database before deciding whether the customer has been inputted into it or not.

I tried to create this using a query having the criteria as the form's text box value (as an expression) but when I input values into the text box the query does not update unless i reopen the query in edit mode and perform a search manually.

My email is aabaaiaaa@gmail.com if any of you guys have any ideas! Thanks

Jay x

View 3 Replies View Related

Queries :: Date Range Search Of Multiple Fields

Nov 24, 2013

I am building Access (2013) database for 100+ employees to keep track of their expiry dates of visa/passport/work permits, for that to work I need to be able to search between date range to generate a report to work on. please check out the image attached as it will explain better where I am stuck, with current settings access keeps giving me empty query table as I think it searches for exact same result in all 3 fields at the same time. But I want it to search between all 3 fields and display if any of the 3 fields falls into that range.

View 3 Replies View Related

Make A Form Which Search Between Beginning And End Date Range

Jul 11, 2015

I have created a database based off of 1 table that holds all of my data. I need to create a form that queries off of the following columns from my table.

Acceptance Date

Sales Rep Name
Sales Region

I want to make a form which searches between a beginning and end date range, Sales Rep Name & Sales Region that can be pulled from these 3 queried selections all from the same form.

View 2 Replies View Related

Search Date Range By Month In Combo Box Within A Form?

May 25, 2012

I'm trying to create a combo list box in a form that has all 12 months (January, February......etc,) listed in rows, and depending on the selection will bring up only that particular month within a range of dates from a table. I don't want it to look at the day or the year, but only the month.

Example: I select January from the drop down list in my combo box and my form will display all records with dates that are in January regardless of month or year.

View 4 Replies View Related

Forms :: Dynamic Search For Multiple Fields

Feb 13, 2015

Find the link by tacking on the following to this site's primary [URL] .....

It was, essentially, a type-and-show-as-you-go search functionality for an Access Form. It works great, except that I'm experiencing intermittent slowness when using the form. As I type, the characters appear very slowly and experience a significant lag time.

I only have about 70 records so far, so I'm pretty sure the slowness is not being caused by an overabundance of data. At other times, it goes super fast without any lag.

View 4 Replies View Related

Forms :: Access 2003 / Dynamic Search Form Very Slow?

Nov 8, 2013

I am using John Big Bootys Dynamic Search Form (built in Access 2003) as it totally met my search requirements, however when typing anything into the search box it is realy slow, taking several seconds for each letter to show in the box.

This has always been a problem now and again, however some of us have upgraded to Office 2010, (although still using the 2003 built Db as we won't move to a 2010 version Db untill March next year) and now the problem is even worse that ever. Everything else seems to work really well except for this search function, however it is the search function that is used more that anything else.

View 1 Replies View Related

Forms :: Dynamic Search - Subform Filter With Multiple Text Box

Oct 27, 2013

I wanted to build a dynamic search form using text box instead of the common combo box type.

I found an example that used the combo box and the searching portion of the code is as followed:

Code:
If Nz(Me.txtID, "") > "" Then
If Len(Nz(strFilter)) > 0 Then strFilter = strFilter & " And "
strFilter = strFilter & "CategoryID = '" & Me.txtID & "'"
bFilter = True
End If

How to insert (Like "*" & Me.txtID & "*") into the code to make the dynamic search using text box possible.

View 1 Replies View Related

Forms :: Date Range In A Query

Jul 8, 2014

I have built a search form based on a bound to a query where I have Like criterias to search data by Departments, Groups, Names etc..For e.g to search by Surname - I have --

Like "*" & [forms]![frm_Search]![Surname] & "*"

This works great and returns Surname data that looks like what is entered in the text box on forms.Now I want to do similar thing in order to search data between 2 dates plus if I leave Date form text box blank it should return all data. Its 2010 therefore using date picker in 2 text boxes (Start Date and End Date)

View 4 Replies View Related

Forms :: User Selectable Date Range On Forms

Jun 30, 2015

I'm working on a database at the moment with a fairly large dataset. I've used "between" functions and created date range boxes to filter query's to specific date ranges which has worked perfectly for queries. Is it possible to have something similar with forms?

The reason i needed to move away from query results onto forms is the ability to have an on click event to goto individual record which wasn't possible from the query results. I moved my query's across to forms which worked well except for the loss of selectable date ranges.

View 14 Replies View Related

Forms :: Count Weekday In Given Date Range

Mar 21, 2014

I am looking for Access VBA code to count number of Day Name in given range

E.g. March 01, 2014 to March 31, 2014
Mon = 5
Tue = 4
Wed = 4
Thu = 4
Fri = 4
Sat = 5
Sun = 5

View 11 Replies View Related

Forms :: Using Dcount With Combo Box And Date Range?

Jun 13, 2014

I would like to have a text box display the number of records for a selected title that fall within a selected date range. Been looking around for a while and have this so far;

=DCount("Discussion_Title","Discussions","[Discussion_Title]='" & [cboType] & "' And [Discussion_Date] = Between ([txtStartDate] And [txtEndDate])'")

I get an #Error message. I just threw that together because it describes what I want, but I know there are syntax problems.

View 4 Replies View Related

Forms :: Date Range Form / Query

Dec 2, 2013

I have a form [ReportForm] with two unbound text boxes to select a date range.

[BeginOrderDate] & [EndOrderDate]

These two boxes look up a query with the following expression:

between Forms![ReportForm]![BeginOrderDate] and Forms![ReportForm]![EndOrderDate]

However in my query I have several other columns with dates [InterimOrderDate] & [PostOrderDate].

How to modify the expression above to look up these dates as well so that when typing in a date range in the form the query will return records where the date range filters records for

[BeginOrderDate], [EndOrderDate], [InterimOrderDate] & [PostOrderDate].

View 2 Replies View Related

Forms :: Limit Number Of Clients In Date Range

Aug 30, 2013

Ok, not sure if this is even possible or where to even start..

I've got a form that has all the info for a client, eg..
Client First Name
Client Last Name
Client Hours
Client WE/CS/EE
Client Day And Times
Client Phone
Client Comments

Begin Date & End Date (2 boxs) on there for date input..

and what i'm trying to do is limit that any date entered between begin date and end date, it'll check and make sure there is only ever 20 clients on any 1 day..

i thought Datediff would be the way to go, but then again how do you get it to search each day and make sure theres only 20 clients on there..

View 1 Replies View Related

Forms :: Calculating Working Days Based On Date Range

Mar 20, 2014

I am trying to calculate the working days Based on all web searches I am unable to find the specific scenario I am working in Auto industry, which means auto industry usually close twice a year for any reasons, let say in July for one or sometime two weeks and in December depends upon the Christmas date usually from December 20 till Jan 01

Now my question is when i am enter the holiday details in table do I have to enter line by line date e.g. july 01, 02, 03 (I am able to understand, how this works but still not yet tried) OR july 01 to July 07 (which make sense, but unable to find how to use date range to calculate working days)...

View 1 Replies View Related

Forms :: Make A Button To Search Range Of Columns In Data Table With Data Type Yes / No

Apr 15, 2013

what I want to do is make a button to search range of columns in data table with data type Yes/no and display the results if the value is yes

View 9 Replies View Related

General :: Dynamic Search To Input Data

Jul 2, 2014

I'm new to Access. I started building a database for work (I work at a nursery) and I used John's Dynamic Search code for an Inventory Input Database but I was wondering is it possible to use this code to input data into a table.

So basically I'm creating a database where I can input Item ID, Description(Plant name), Date, Location, Yard, and notes. For the Item ID and Description that is where I used the dynamic search code (as a combo box) so I can easily enter the Item ID and it will search for the Description. I got all this to work except that when I choose my selection it does not save on to the records. The other fields does save just not the dynamic search.

View 8 Replies View Related

Creating A Dynamic Search Box In Access 2010?

Nov 24, 2011

I am using access 2010 and am trying to create a dynamic search like the one google uses, it will feature a drop down that will populate with results but when its not in use the drop down is not shown.

I'm looking to add a menu system to the form its self so that the users will be able to do certain functions. third image is what I'm looking to create with the menu bar at the top of the screen.

[URL]

View 1 Replies View Related

Modules & VBA :: Dynamic Listbox Search Error - Cannot Setfocus

Jun 24, 2014

I am using John Big Booty's code for narrowing down the content of a listbox. It works beautifully, with the exception of when I type the character "i" into the search box it gives me a Runtime 2110, cannot setfocus error. I have run through the entire alphabet in lower and upper case and consistently get the code failing on lowercase i only.

Here is the code:

Private Sub searchFor_Change()
'Create a string (text) variable
Dim vSearchString As String

'Populate the string variable with the text entered in the Text Box SearchFor
vSearchString = searchFor.Text

[Code] ....

Here is the link to the original thread that the code came from. [URL] ....

View 3 Replies View Related

Modules & VBA :: Adding Combo Box To Dynamic Multi Search

Jul 27, 2015

I stumbled on to a Dynamic Multi Search form on this site and have been tailoring it to my organization's directory of contacts. Everything was going good until I was asked to include a search by groups to which each individual may belong. The data in the table is contained in Yes/No check boxes for around 30 different groups. I am hoping to add a combo box to the Dynamic Search as a means to pull up individuals in any 1 category. Below are two attempts at what I thought might work, however, neither performs any filtering.

Code:
Private Sub Groupbox_Change()
Dim db As Database
Dim qdf As QueryDef
Dim strSQL As String
Set db = CurrentDb
Set qdf = db.QueryDefs("qryGroup")

[code]....

View 6 Replies View Related

Queries :: Date / Time Query - Return All Records Of Specified Date Or Date Range

Aug 19, 2015

I have a table that has entries recorded with date and time in one field, and I want to have a query that returns all records of a specified date or date range, regardless of the time in the field.

I have tried

Code:
Between [StartDate:] And [EndDate:]

And

Code:
Between [StartDate:] & "00:00" And [EndDate:] & "23:59"

Neither of which work ....

View 13 Replies View Related

Outer Join Creating Duplicates In Dynamic Query Search Results

Jan 22, 2008

Now that i have read this again, i think it could be summed up into one question...if i have a form based off a query with an outer join that has various duplicate records, is there a way to use the recordset in an if statement that says something like if this recordID = that recordID then dont show one of them...hence not showing the duplicate field data in the form.If you want a more specific description of the problem, read on, otherwise don't read on.Hi All,So I hope I can explain this ok....here goes....I have a search using dynamic queries: I have a form where the user can put in various information he wants to search to find a record. In this case it is searching for Hotels. So the user can search a country to see all of the hotels in that country. Also, the user can search an interest like Beach or Nature to see those hotels that apply. Obviously each hotel may have more than one interest so I have a 1-many relationship with a table called Hotels_Interests.The kicker, and you can likely already see why, is that the user does not have to fill out every search field. He may search Country&Interest, or just one or the other, or leave everything blank to see all hotels in the database. The results are simply ordered by HotelID or something like that in a form that is based off the dynamic query. The dynamic query is of course just based off the query i explained, but with criteria added in.The problem is with the query that i am basing this search off of. Right now it has the main Hotels table as well as the 1-Many table Hotels_Interests and even another that is 1-Many Hotels_HotelTypes (say All Inclusive, Resort, etc.). So this query has various 1-Many tables as well as the main Hotels. Now, if i fill in all of those fields in the search form, there will obviously not be any duplicates returned, which is super. But if i leave Hotel_HotelTypes search field blank, i will be returned with the same hotel twice or more times, which is my problem, because i want nice search results.I have heard of people using Union queries to get rid of duplicates but this obviously does not solve my problem as i do not want to just get rid of these entries. What i think i want is some VBA method or whatever of showing in my search results each HotelID that meets the search criteria only one time.Right now i have it working with If statements that say if the user has left a specific search criteria blank then base the search off a different query. This is obviously crazy and is only a temp fix. Now that i want three or more 1-many tables in my query, i would be talking about if statements for like 6 or more queries, insane.I apologize for the length of this, but i wanted to be perfectly clear. I feel like it should be not too hard, like using a record set for the form and not showing certain records or something, but i am not sure how to do it.Thanks so much. Dillon

View 4 Replies View Related

Forms :: Search By Date Option?

Jan 13, 2014

I have a text box for the user to enter the week number, I started thinking I wanted to have some more options here, can I be abit more clever with the options when designing a form to search by date?!

I want criteria like....

Specific Date
Between Dates
Current Week
Last 30 Days

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved