I have tried a few combinations with No success! Using Access 2010 32 bit.
Select Case KeyCode
Case vbKeyF4
'MsgBox "The F4 key was Pressed"
KeyCode = 0
Case Else
'MsgBox "No match!" 'testing
End Select
Dim intAltDown As Integer
intAltDown = (Shift And acAltMask)
> 0
I would like to disable the shortcut, CTRL - which allows a user to delete a record. A user accidentally deleted a record while typing in an email address that had an underscore in the email address. While trying to type it she must have hit the CTRL key instead of the Shift key follow by the -. She noticed the delete confirmation, but not thinking, pressed enter and thus confirmed the deletion of the record.
Other than telling her to pay more attention, how can I disable the shortcut in Access 2013?I tried using the Application.OnKey "^-", "" but I continue getting the error method or data member can not be found
Hey, I have a database and a login panel and I need to stop some users from using ctrl + c in query's or through out the database. The way I have set the db up is if a user logs in correct then they get directed to the appropriate switchboard. I have already disable all toolbars therefore disabling right click and on my forms I have vba to stop ctrl + c but can't figure out how to do it on queries, I have tried search and searching Google but if I have missed a post please include a link, any help would be appreciated THANKS :)
View 3 Replies View RelatedI am using Access 2010.
In my database forms, i try to use Ctrl + F and its working fine. But when i link that form to a Navigation form and tried ctrl + F , i got the following error message, how to fix it.
Error msg.
You Can't use find or replace now.
I also attached the error msg.
I have created a form that contains data from two tables. Each drop down on the form, for each table, contains multipl values. I want to be able to make multiple selections from each down (usually this is holding down the ctrl key and making multiple selections). However; this method does not work in Access. Is there a way to select multiple values at one time in Access similar to holding down the ctrl key?
View 2 Replies View RelatedAs the title says, ctrl-W works on all my other forms but not on the one which has Pop-up set to "Yes".
View 1 Replies View RelatedI have a fully functioning frmLogin that appears when the database opens. After correctly logging in, it takes you to the appropriate switchboard. The problem is that I set autokeys to allow F1 to automatically open the switchboard, but I don't want users to hit this to bypass my login screen. The reason for keeping the switchboard open is to force the user to close the database using the switchboard(eventually I want to limit the user to only the forms that I have created in a split database).
My other option that I tried first was writing a module that would detect when all forms are closed, then open the switchboard. But I kept getting Error91 and got frustrated/stopped attempting this method. Using the hotkey gives the user a similar functionality, but less conveniently so(since its not an automated process, etc.).
In A2007 if you disable the Navigation Buttons on the form the Me.RecordCount will be set to 1 when the form opens ? I replace the Nav buttons with my own set but my "Go Next" button will not work untill I hit "Go to Last". This apparently restores the recordset count to the correct number of records.
View 14 Replies View RelatedI am running Access 2010. I have added the following to the "On Open" event on my main form:
Code:
Private Sub Form_Open(Cancel As Integer)
DoCmd.ShowToolbar "Ribbon", acToolbarNo
DoCmd.NavigateTo "acNavigationCategoryObjectType"
DoCmd.RunCommand acCmdWindowHide
Me.ShortcutMenu = False
End Sub
My main form (frmMain) is displayed when the database opens. As you can see, I am hiding the ribbon and the navigation pane from users. I also want to prevent users from right clicking on the form and opening it in Design view - trying to prevent any monkey business. However, the line:Me. ShortcutMenu = False
is not preventing users from right clicking on the form and getting the shortcut menu and going into Design view.If I go to Options and uncheck: "Allow Default Shortcut Menus" then I lose the ability to print reports because I have the ribbon hidden and this will not allow right click on reports.Converting to .accde is not an option at this time.
I am asked to create a checklist for a number of tasks to be executed in a particular shift. However in some tasks can be skipped. There are three shifts per day.
To accomplish this i have created a continious form with a number of checkboxes per task which represent the days of the week. The tasks itself are stored in a seperate table with a checkbox per shift (task settings). If the tasks must be performed in a particular shift, the checkbox is activated (= true).
Goal here is, if a task doesn't have to be executed in a shift the task should not be visible on the continious form. The recordsource of the continuous form is a query, which contains a join between the table with the task settings and the table with the tasks performed.
I have placed some code to perform the task in the form's current event
In the continuous form current event I have placed for every checkbox the following code:
Private Sub Form_Current()
If Me. PerformTaskShift.Value = True Then
Me.MaandagOchtend.Enabled = False
End If
End Sub
However when i execute the code and load the form, not only the checkbox in the row mentioned are set invisible, all the rows are. Is there any way to set only the checkboxes on the rows mentioned invisible, in stead of all rows?
I have a form called PAF_Assignment and on this form there are many textboxes for editing. After all fields are entered, the user clicks on a button and this button populates the PAF_Issued_Date field with the actual date.
Then I want to disable (enable=False) all fields on this form once there is a date on PAF_Issued_Date as I don't want any user to make any changes after submitting it, although the user would still be able to read the information submitted.
I have tried the following...
PAF_Assignment Form AfterUpdate Event
If Me.PAF_Issued_Date=Not null Then
Me.FieldName1.Enabled=False
Me.FieldName2.Enabled=False
Me.FieldName3.Enabled=False
[Code] ......
However this is not working, there is no error message or anything but the fields remain enabled with the date...
I have a table form (I want to have many records available in the screen)
I want to disable fields based on a value of another (main) field.
The fields are check boxes, so the automate formatting is not available.
I use the VBA code below:
Select Case name1
Case "POINT"
Me.sf1.Enabled = False:
Case "SIDE OUT"
Me.sf2.Enabled = False
Case Else
Me.sf3.Enabled = False
End Select
but the fields become disable to all records, not only to the records under the right condition. Why?
Basically I want to put a code in the "on load" event of a form that enables or disables navigation buttons based on a value in a table (the table has 1 record and 1 column).
So if the value is "A", I want to hide navigation buttons on load; if it is "B", I want to show navigation buttons on load.
I know I can set this property in each form, but I have a number of forms that I want to configure at the same time.
My problem is that I don't know how to reference the value in the table.
I am trying to lock records on a form and subform after a checkbox has been ticked, have used the code below from a previous post.
Private Sub Form_Current()
If Locked = -1 Then
Me.AllowEdits = False
Me.AllowAdditions = False
Me.AllowDeletions = False
[Code] .....
This is locking the Main form records is there a way to code this so that the fields on the subform are also locked when the checkbox is ticked?
I need to disable or hide the restore, minimize and close window buttons found in the top right hand corner of a form.
I navigation buttons that controls open, close etc already set up.
I am not able to disable NavigationButton when i login navigation form using login form. I am using MS access 2007 - 2010.i am using below code but getting error.
Forms![Navigation Form]!NavigationButton13.enable = False
Error
Run-time error '438'
Object doesn't support this property or method.
Any other method to disable NavigationButton.
It seems you can use ctrl+Tab to step through the pages on a tab control and bypass normal events. Is there a way to stop this?
View 2 Replies View RelatedI've been using the ctrl+F search in order to search my db for a string or phrase (from a form). Now, after I put it on the Intranet and accesss it through there, I use ctrl+F and if I search for something that is not there, it doesn't return a "did not find" box. It's like it just keeps searching.
Is using the find feature like this just bad form and I should write queries for users to search the db?
Comments/critiques/criticisms welcome. Thanks.
Is there a way perform CTRL+' with vba code in MsAccess 2000
Carbo
CTRL+' copies data from a field in the previous record to that field in the current record.
Resolution:
http://support.microsoft.com/?id=210236
If you receive a compile error related to DAO Recordset go to:
http://www.mvps.org/access/bugs/bugs0031.htm
I am having a form that has a listbox, which brings up a lot of records, and the user may choose multiple records, but when user wants to scroll down the page to multi select, he cant do it with the ctrl keyboard button, when he press ctrl the page jumps back up, is there any workaround for that?
View 14 Replies View RelatedSome times, the system become stuck, which forces the user to end the program using Windows Alt+Ctrl+Delete. I have MS Access code which I want to execute when the user made the 'End Program' event using the Alt+Ctrl+Delete.
Thanks,
I have a form "Member's Details" that has a few tabs. One tab is titled "Deacon Families" and I want to be able to either lock it, or grey it out, or something along those lines base on if the member is a deacon or not (I do have a yes/no field asking if they're a deacon). If they are NOT a deacon, the user should not be able to open the tab (because there would not be any information to show) and a pop up saying something like "This tab is empty because the member is not a deacon". If they are a deacon, I would like it to show all the members who have been assigned to them. I know this needs to be done in a subreport, but I don't know how to set it up. There is a deacon table which is linked to a family table which is linked to the member table, but the member table and deacon table are not directly linked.
View 10 Replies View Related I have a form that allows me to update entries in a table. When I select the line I need to update and hit the "edit" button I get a run time error '2164' You cant disable a control while it has the focus. when I debug the line in the code that is highlighted yellow is
Me.cmdEdit.Enabled = False.
I developed the database in access 2013, and now I am forced to run the database on a computer that has Access 2003. I have changed the database base to access 2000-2003.
Hi All,
Is there a way to disable the Access Min Max Close buttons like you can on forms?
I need to have people use a "Close Application" button (there is code behind it)
To be clear.. I need to disable the Min Max Close on the Access application and not forms.
Thanks
Detrie
Hi!
I want to disable the usage of mouse scroll on my forms. Because, as things are now, you may accidently choose/ scroll to another Record/ Post, when editing data for one specific record.
How do I accomplish disabling usage of mouse scroll?
I am facing some problem regarding sub form row.When i want to disable single filed then it disable all rows field. i will be able to disable single field in sub form.
View 3 Replies View Related