Forms :: Display Field From Separate Table In A Form To Use As Reference
Mar 25, 2014
In my form (source tblJobs) i input a contract number from tblContracts. but i would also like it to show the contract address when the contract number is entered. Both fields belong to tblContracts but i only wish to enter the contract number, the address will just be used as a reference as it isnt something i would have to enter again.
So for example
112 - Main Road
If i enter 122 in my ContractNo field i would like it to show the contract address for that specific contract.
Can i do this? If So how?
View Replies
ADVERTISEMENT
May 21, 2013
I am new to Access 2010. When working with a form, how do I display the field list? The list of fields for the table associated with that form.
View 1 Replies
View Related
May 24, 2006
I am working on an form (using Access 2000 and VBA) that stores registration information, along with events that were attending, in a table and later retrieves that same information from the table to display the regist. info, events attended, and allows the user to change any current info along with adding new/recently attended events to each record.
I am currently allowing a max of six events, along with event details, to be stored and I am running through six different if statements to match the Event_List (name of the combo box that contains "Event 1 Event 2...Event 6") to the appropreiate information in the table. I have started to simplify the code to remove the redundancy by running a Do While to to find the correct Event by using an integer variable that starts at 1 and is incremented until it matches the 7th character (the number portion) of the Event chosen from the Event_List. After this I want to use that integer variable to say what event information in the table to gather. My problem is this: I have tried many different varieties of the following code and I am unable to make it work. I had never used Access up until a week and a half ago, and a few days ago I went and bought the book "Access VBA Programming for Dummies" but it doesn't help for this problem. Here's part of the code:
Variables (Event_Name, PMT, Receipt, Payment_Type, PIF) refer to Form textboxes while the variables in the [] refer to table field names.
'------Code I'm Currently Working On-------
Dim intX As Integer
Dim EventVal As Integer
Dim strX As String
intX = 1
EventVal = Val(Mid(Event_List, 7, 1))
Do While EventVal <> intX And intX < 6
intX = intX + 1
Loop
strX = str(intX)
Dim E_Name As String
Event_Name = [Event strX ]
PMT = [PMT strX]
Receipt = [Receipt strX]
Payment_Type = [Payment Type strX]
PIF = [Paid In Full strX]
'-----Old Code That I'm trying to simplify-------
If Event_List = "Event 1" Then
Event_Name = [Event 1]
PMT = [PMT 1]
Receipt = [Receipt 1]
Payment_Type = [Payment Type 1]
PIF = [Paid In Full 1]
Camp_Site = [Camp Site 1]
Cabin_Number = [Cabin Number 1]
ElseIf Event_List = "Event 2" Then
Event_Name = [Event 2]
PMT = [PMT 2]
Receipt = [Receipt 2]
Payment_Type = [Payment Type 2]
PIF = [Paid In Full 2]
Camp_Site = [Camp Site 2]
Cabin_Number = [Cabin Number 2]
ElseIf Event_List = "Event 3" Then
Event_Name = [Event 3]
PMT = [PMT 3]
Receipt = [Receipt 3]
Payment_Type = [Payment Type 3]
PIF = [Paid In Full 3]
Camp_Site = [Camp Site 3]
Cabin_Number = [Cabin Number 3]
PLEASE HELP!!!!
View 3 Replies
View Related
Dec 8, 2014
i want to search a phone number in contact information table with column names - number, name, address, dob, gender, f-name, m-name etc and show them in a form with each field in separate text boxes in access 2010.
View 4 Replies
View Related
Mar 17, 2012
I have a form, which i use to book in products received. What i want to do is if the quantity received is equal to what was ordered then i'd like to update a yes/no field (Order Complete) on a separate table to true.
View 8 Replies
View Related
Dec 5, 2014
I am trying to see if it is possible to store colors in a form or table and then reference them while in VBA. What I am hoping to do is when I write all my code for command buttons to change On Got Focus, instead of writing xxx.backcolor = RGB (255,255,255) i could do something like xxx.backcolor = Forms!HiddenColors!Command That way if i want to ever change the color scheme of the db, I can change it in one place rather than hunt lines of code.
I have played around but with no success. Technewonline is a website that specializes in introducing the latest technologies such as Best Tablet Android Have Price Under $200 and Best tablet of Apple in 2014 and The Best Midrange Smart Phone In 2014 and Top Best Ultrabook Of 2014 and The Best Phones 4G Valued At Under 300 USD is also a website for sharing your tips about computers, mobile phones and tablets, products are available from leading supermarkets will surely satisfy you.
View 1 Replies
View Related
Mar 21, 2013
I've just returned to work after kids and started managing a large Access database related to health, back-tracking over many years.
Currently in filling a form we physically enter:
Apples 2.2
red apple 2.4
red apple cut 2.45
Oranges 5.6
Cucumbers 8.5
Is it possible to get field 2 to automatically fill with a number code due to the text typed in field 1?
FWIW, I'm confident at more basic Access e.g making follow on default value = Dlast("field""table") type stuff but the more complex stuff I haven't touched since Uni over a decade ago and you will need to be gentle while I blow away the cobwebs
View 3 Replies
View Related
Apr 1, 2014
I have a form with a memo field which is used by users to input transctiptions of Customer Contacts but the form is getting busy and the box now only 2.77 wide X 0.683 High.
this makes it impossible to read on the form even as a text box with scrolling..how to add a mouse over on it so that it fires up a large text/meg style box to display the contents?
View 1 Replies
View Related
Sep 2, 2013
I am teaching myself Access 2007. I have a successfully imported my database to a table, and now I want to design Forms and Reports. It seems Access wants to basically display the data in either one of two formats, either Columnar, or Tabular. One Form displays the data in columns, with one field per line, and the other displays the data in rows, with one whole record per line. I need a Form (and Report) which will display more than one field per line, and use more than one line. For example, some lines will have 2 or 3 fields, then the next line may have only 1 or 2 fields. Following is a print-out of a record from my existing database (stored in a comma delineated .txt file and read and printed by a program written in DOS, QBasic):
.
461-1036 :c: Assignment of O&GL
Feb 28, 2008 Filed: Mar 20, 2008
Grantor(s): Plains Exploration & Production Company;
Plains Resources Inc.; Pogo Producing Company LLC;
Pogo Panhandle 2004 LP; Latigo Investments LLC;
Latigo Gas Services LP; Latigo Petroleum Inc.;
Latigo Petroleum Texas LP
Grantee(s): Oxy USA Inc.
Comment: Assigns 50% of Assignors' interest;
CORRECTION ASSIGNMENT at 466-493 deleting certain
properties from the description
[The attached .pdf file shows a better view of the print-out]This data is abstracted version of a document recorded in the public record in a courthouse. On the first line there are 3 fields:
1) the Volume-page,
2) A notation that we have a copy of the document, and
3) the title of the document.
On the 2nd line there are 2 fields:
1) the date of the document and
2) the date the document was filed in the courthouse.
The next 3 fields are displayed one at a time in columns. How I can get Access 2007 to display like this?
View 1 Replies
View Related
Oct 5, 2006
hi,
in my table i have a customer id number.
each job will have one customer id number.. and customers will have many jobs to their id
i simply want to display on my form the number of times that customer's id has appeared in my bookings table.
eg.. a customer has used our services 25 times.. (so obviously their customer id is found 25 times in the booking table as a foreign key)
so can i just place a control on my form that displays this value (i presume it is some kind of counter)..
so i will know on my customer form how many times they have been included in a booking record
View 3 Replies
View Related
Dec 5, 2013
When entering a lookup reference to a table field it pop up message saying, "you can't modify the table 1 this time as it is in use by other person or process" i have closed all forms and table reports but the problem is same to rectify ? also when going to see the realationship then there shows no relation ship developed even after the lookup reference from one table filed to another table field.
View 1 Replies
View Related
Apr 10, 2013
I have two tables, Table 1 and Table 2 and two related forms, Frm1 and Frm2. I want to be able to update the data on Table1 from Frm2, that is, if I change the data on Frm2, the corresponding fields in Table1 will update to the same data. I know that if both tables are open I can reference the fields on Frm1 and Frm2 with an IF statement: If Active = True And Forms!Frm1a.DoNotchange = False Then..And I know on the update query I can reference a control on a form by Forms!Formname.Control. Wll works fine.What I would like to know is can I reference a table field in the same way. For example, I have tried to use the IF Statement If Active = True And Tables!Table1.DoNotchange = False Then..Is there a way to reference the Table instead of the Form in both the VBA and the query? The problem seems to be that I have the two bound controls [Active] on Frm2 and [DoNotChange] on Frm1. (Which I need).
View 5 Replies
View Related
Jul 15, 2013
I am trying to display a table records on the form with this code:
Private Sub Form_Load()
Dim rs As DAO.Recordset
Dim str As String
On Error GoTo Err_cmd_vimport_Click
'defining the form recordset
[Code] ...
Err_cmd_vimport_Click:
MsgBox "Error No: " & Err.Number & "; Description: " & Err.Description
Resume Exit_cmd_vimport_Click
End Sub
however i could not be able get any results in the form as if the debugging is not showing an error.
View 1 Replies
View Related
Jul 27, 2005
In short can I display a field on a form that is not in the forms field list without using a sub-form? I am trying to show a value from a query on this form. I tried this in the control source:
[qry_op500_entry_delta]![countofphone model]
I get an error stating that this is not in my field list for the form.
If the answer is No or if needed I can give more information on what I am trying to do.
View 6 Replies
View Related
May 16, 2014
My intentions are to get my combo box to display data into a field in my form, when it is changed/selection is made. So far my form has the following:
Combobox: CBOCharacters
Field: CharacterGender
Both of these are in the same table; tbl_Characters. The data type for CBOCharacters is a number and its called CharacterID in the table.
So far I have created this piece of code:
Private Sub CBOCharacters_AfterUpdate()
Me.CharacterGender = DLookup("CharacterGender", "qry_StillNeeded", "[CharacterID]= " & Me.CBOCharacters)
End Sub
When I run this event procedure i get an error:
Runtime error '2471'
The expression you entered as a query parameter produced this error '[CharacterID]'
View 3 Replies
View Related
Apr 9, 2013
I have 1 table that I duplicated to make 3 tables total. I did this b/c I am trying to create separate columns from the same field and table. The field is Workorder. Each workorder list the workorder number followed by a dash and then code. I am wanting to put all of the workorders with the same code in it's own column.
I have 5 codes that i am searching for. The first column list the workorder and a code (123456789-AD). The second column (123456789-BC). I'm good to this point but my problem occurs next.
The third column i am trying to put 3 types of workorder and it's code in the same column. As follows, (123456789-CD, 123456789-TC, and 123456789-PTC. However, when I do this it takes the results from the 3rd column and applies it to the 3rd column but also the 1st and 2nd column. I tried a UNION query and unless I am doing it incorrectly it does not work.
View 3 Replies
View Related
Mar 15, 2006
I would like to update two fields [Category] and [ProdType] in tblAccum based on a reference table.
The reference table is tblReference and contains the fields [Code], [Category] and [ProdType].
tblReference example of field values:
Code Category ProdType
A Blank Accessory
BS Blank Blank Stock
O Printed Offset
So if the Code field in tblAccum has a value of O then based on the tblReference table the Category value would be Printed and the ProdType value would be Offset.
Any help is greatly appreciated.
Thanks,
View 7 Replies
View Related
Jul 3, 2014
I have an access db that is linked to a sharepoint list (the list originated in Access).I tried a simple select query with parameters to search for by id and another query of the same table to search by date.They both come back with the same error of "cannot reference a table with a multivalued field using an IN clause that refers to another database"Iv'e gone through the table and these fields that the query is using and none seem to have any multivalues.
View 6 Replies
View Related
Feb 3, 2014
I've established a many to many relationship using a junction table.
So I have 3 tables (A for "materials", B for "batches", and J for "junction")
Form A is linked to table A, and contains a subtable linked to a query from table J. This allows me to input materials into table A and then list all of the batches it may be used in that are in table B. I successfully got this to input all the batches and materials combinations in table J.
Now on form B, which is linked to table B, displays the batch information, with the subtable J.
My problem, is that only the materials primary key is showing, not the other information that should be linked from table A.
View 14 Replies
View Related
Apr 3, 2014
I use Me.Filter & Me.Filteron to filter the data from the table to display in the form, i used this in On Open event & This is working fine.
But in the filtered form when the user right click and filter some value and unfilter the search (in the bottom of the form next to search (Navigation Button) ) then this shows all the data from the table i.e its not taking the on open filter condition.
View 3 Replies
View Related
Aug 8, 2014
I have a split form on my database where I have my combo boxes bound to a primary key but they display the description field so it's much easier to understand. Is there a way to do this with option groups? In other words, I would like the datasheet part to display the option group labels rather than the values so it is easier to understand.
View 1 Replies
View Related
Mar 25, 2006
Hi All
I am trying to reference a field on a sub form from a button on the main form. I want to read a field called "Date1" and I want Date1 from the first row, regardless of which row has been selected by the user. The statment used is
FrmGroupSubform.Form!TxtDate1.
Any ideas PLEASE
Steve
View 2 Replies
View Related
Apr 8, 2015
I suspect I have made a beginners mistake in my very first Access database, but before I start this again from scratch, I would like to know if it is really a mistake, or if I might easily fix it somehow.
I have a form with several combo boxes.
All the source fields for those comboboxes are in one table. But of course every field has a different number of cells containing content. Now when I open a combobox in a form, the sequence of the cells are a mess, and there are lots of empty lines for many of them. (probably also because I reordered some fields in the source table)
I now have no clue if I can crop the combobox dropdown output somehow so that each combox only shows cells with content. (and preferably in a defined order)
Should I have started with creating one different table for every combobox, and not trying to put all the source fields in one table?
View 7 Replies
View Related
Oct 7, 2013
I have a form/subform that requires some fields from the Switchboard for its criteria. Last week due to no action on my part, it started asking for those values as Parameters instead (Forms!Data!txtInspDate), etc! The new form loads, but of course it is blank with no data. This happens if I load it from a command button or from the navigation sidebar... UNLESS I first load the switchboard in Design Mode, go to VBA window, then reload the Switchboard in Form Mode and press the button. From then on until I close the database, everything works fine!
View 9 Replies
View Related
Jun 15, 2014
I have a notes field in the customer table that is a memo field. An example of one customer's notes field data :
<div>20.3.14 Ordered 2 cartons</div>
<div>4.3.14 Ordered 2 cartons</div>
<div>18.2.14 ordered 1 carton</div>
<div>30.1.14 ordered 3 cartons SCENTED wipes</div>
[Code] ....
I want to extract the date to append to a date field in a "Calls" table and the comment into a text field in the "Calls" table. Is there a way I can do this via query or code?
View 2 Replies
View Related
Apr 21, 2015
I had this line :
GBL_Tab05ID = Me.Tab05ID
and wanted to change this. I have this on the On Current event and it gives me an error because the data is not in the record source when the form opens. How can I change the me. to the formname? The form gets dynamically created so i have
Dim CurrentForm As String
CurrentForm = Me.Form.Name
then i put
GBL_Tab05ID = Forms(CurrentForm).Form.Tab05ID
but that did not work...what is the correct syntax?
View 5 Replies
View Related
