I have a form thats already created. I would like to put a box or something next to a button so I can monitor when the last time the button was pushed. Ive seen it somewhere before and never took a moment or a need to see how it was put together.
View RepliesI have created a button to display the current time ( sign in and out).
It works fine with this code Me.field = time$
However i need a code beneath it to run the actual query that will display this time onto the table...
I have attached an image of one of the query, I need it to run.
Is there a way to show the toggle buttons in an option group as NOT selected when the form first loads up? I've cleared all the default value properties in the table and the form but it always loads as showing one of the buttons pressed/selected. I want the form to load and both buttons in the group look the same.
View 3 Replies View RelatedI have set up a form and only want to display the date and time that will appear automatically based on when the record was created. I definitely don't know how to do this.
The format that I'm looking for is: 07/24/13 11:45:44pm
From what I can see I would need two separate fields to accomplish this. I would prefer to only use one if possible. I would like to execute the value within the new record as it is entered. That date and time from that point should never change.
I will want to use the date and time in the future for quality control.
I am not sure where to start or go about creating message box that would display "No results found" if my queries return no results. My search of the forums hasn't been fruitful.
I have created one form that has a text box and a button that works as a search function to run through the tables and displays the applicable queries. Currently, if no results are returned nothing happens. Preferably I would like a message box to display stating that there were "No results found". I would assume that the code would be associated with the "Find" button. Here is the VBA code as it stands, again, I haven't even attempted to add code for a message box.
Private Sub Find_Click()
On Error GoTo Find_Click_Err
If DCount("Heading", "Service Desk Manual Query") > 0 Then
DoCmd.OpenQuery "Service Desk Manual Query", acViewNormal, acReadOnly
End If
[Code] .....
Find_Click_Exit:
Exit Sub
Find_Click_Err:
MsgBox Error$
Resume Find_Click_Exit
I have continuous form in Access 2010. I highlight selected record. Now I would like when user will select record, that record will display button to give ability user delete it. For not selected records button not visible and disable. How to display button only in selected record in continuous form?
View 2 Replies View RelatedComponent that is capable of putting a timeline on an Access form and displaying records with a date-time field.
What I want, is for example:
tabevents contains two basic fields:
eventtime (datetime)
eventname (string)
eventcomplete (bool)
What I want to place on the form is a visual timeline which calculates the time between the first and last event and places all events accordingly along the line, spaced out, ideally with an arrow/marker that moves along the line as time progresses, highlighting any events that haven't been marked as complete. Double clicking on the event would allow us to mark it as complete.
I know this is a long shot, but thought it worth seeing if such a thing exists.
I am attempting to create a form (Access 2013) that will include buttons to open the hyperlink menu to add a hyperlink into a table. It works if you click "Ok" without issue, however, if you click "Cancel" or click on the "X" I get a "Run-time error '2501' - The RunCommand action was cancelled". This is obviously referring to the RunCommand in the VBA code. The code does not reference the cancel or close option of the hyperlink editing box. I don't know how to correct this error.
Code:
Private Sub Command9_Click()
Me.[Hyperlink].SetFocus
DoCmd.RunCommand acCmdInsertHyperlink
Command9_Click_Exit:
Exit Sub
[code]....
Also, is there a way to get the hyperlink to populate as the full network path and not the drive letter?
Is there a way to get a string from a field and use it to set the caption value for a command button at run time?
View 2 Replies View RelatedSo what I've basically got here is a form with 4 combo boxes and a button that when clicked will filter the results of a table (which is a subform/subreport) based on the values inside the combo boxes. So the problem I have is that when I open up the form it displays a fully filled table but I just want to display the row names and a blank table until the filter button is pressed.
View 2 Replies View RelatedI have a single form which becomes either readonly or editable or addnew using a circular toggle switch. The toggle switch is activated by a command button and the caption of the command button is used as the display of the mode.
The SetAddModeBt is a separate command button that initiates the add mode. The problem is that various form or field properties when defined on the fly are not stored and they get lost when you open the form again. Look at the code below:
Code:
Sub tglEditBt_Click()
'-------------------------------------------------------------------------------
' Circular toggle button to change display mode of the form
' ReadOnly - Edit - Add
'-------------------------------------------------------------------------------
' On Error GoTo NotFound
Dim ForName As String
Dim strSQL As String
Dim FMode As String
[Code] ....
Here the first two cases fail when executing the last statement saying it is not supported.
I am trying to make a user friendly form where the user can select mulitple items from a list box and then from that selection this info is listed in another table (Form) where they can add additional info.
For example,
List box lists Products to be made (1,2,3,4)
If I choose item 3 and 4 i want them to be listed in a seperate form where I can add more info (quantity).
Any help or other suggestions is appreciated.
Looking to create two command buttons or two keystrokes sets in an Access 2007 form that will allow me to place a current date and time in any allowable field where the Cursor is presently placed. Similar to what was in Access 2000, ctl: (for the current date) and ctl shift : (for the current time).
View 2 Replies View RelatedDetailed search cannot answer my time problem. Returning after long break in programming, I am trying to create a form to display TimeIn and TimeOut fields such that actioning an OnClick command (or separate tick-box), TimeIn field will hold current time for that record. Need to set the same for a TimeOut field. Both cases time always to be < 24 hours.
Am so rusty on MS Access putting default value as =now() produces an error!!
Any basic help to wind up the old mind always appreciated.
hi, i have created a form and would like to display todays date and time in the following format
Mon 6 June 2005 24:00
this will literally be just on the form, no link to anything or any extra dynamic features. just there for the user's benefit
if anyone could tell me the steps that need to be taken, im guessing some formatting will need to be done, or some script will need to be placed in the form event code builder.
i have only recently focused my attention on ms access so a descriptive but to the point explanation will be ideal thanks
i want to display time remainig on my quiz form
say quiz has a total time of 15 mins
so i want to show the time on my form
so the user know how much time he/she got
i did search th eforums but couldnt find any
sorry if it is here already
if it is can some on epint it for me
thanks in advance
I have two fields in a form that are both bound to the same date/time control source. One is for the date, one for the time. Using the format and input mask properties is some help. But when the focus is on the field the entire date + time displays. I would like the date field to show just the date portion and the time to show just the time portion, but haven't figured out how yet.
thanks, roy
I'm making a dispatch call database that will be sorted at the end of the month based on call types and which shift that call was originated on. Our shifts are 6a-2p, 2p-10p, 10p-6a.
I am figuring that the time would be converted to minutes and then the display would be figured based on which times the minutes occured between. IE: the call origintaed at 0100hrs = 60 minutes. It would figure that 60minutes translates to "Night Shift".
How would I convert time into minutes and how would the if/then be established?
Thanks so much for all your help
Dave
I've got a report displayingg appointments, only issue is that it doesnt display these times or date in order of earliest first...
View 6 Replies View RelatedWhat I want is for the "Time In" column in the listbox to show the time as hh:mm, just like the other two. The listbox is pointing to the table correctly, as evidenced by all the data showing up, but what floors me is despite the "sign_in" table showing time in all three columns in the desired format of hh:mm, the listbox seems to have its own thoughts about how to display the called data.
View 7 Replies View RelatedHi All
Is it possible for a command button to appear on a form only if a certain condition is fulfilled ? Otherwise it is invisible. The condition would be that one of the field entries on the form must equal a specific value.
How might I make that happen ?? (I'm a beginner !)
NoVoiceLeft
I want this expression to form a value of a field on a query...
I know that what I want is something like this:
arrangedActivityName: [activityDate]+", "+[activityTime]+", "+[activityId]+", "+[venueName]
When I do it though, its shows "#Error" in the field.
I'm guessing that its something to do with the fact that date and time are not strings or ints therefore cannot be displayed. How can I fix this?
Does anyone know how I can do it?
Thanks, Ant...
I would like to make a query that count simultaneous connection.
Here is my tables
Users (ID_User, Name)
Date_logon (Id_on, Date_logon, time_logon, Num_user#)
Date_logoff (Id_logoff, Date_logoff, time_logoff, Num_user#)
Here is a part of a query that display users date and time of log on and log off.
Users Date_logon Time_logon Date_logoff Time_logoff
Utilisateur1 13/05/2015 17:38:42 13/05/2015 18:52:15
Utilisateur2 13/05/2015 17:12:21 13/05/2015 17:30:24
Utilisateur3 13/05/2015 16:59:08 13/05/2015 17:16:06
Utilisateur4 13/05/2015 16:54:14 13/05/2015 18:32:13
Then I put that result in a pivot table in Excel. In line we have time logon by date and in column we have time logoff by date.
Here is the issue : In Excel for the 4 lines above, it counts 2 logon at 4PM and 2 logon at 5PM. We should have 4.
I have a database being used to track and bill therapy units. I have a table that stores the pre-authorizations that tells me within a [start date] and [end date] I am limited with X amount of units (that is all the client's insurance and/or funding source will pay for within the time period). I also have about 4 different codes I can be authorized for which is also stored in this table - each code a separate pre-auth record.
Another table is where I enter in the type of therapy (service code) I've completed with the client. I put in the Service date, start time and end time and it will automatically give me the amount of units to bill (1 hour=1 unit). If I happen to choose a code or enter in a service date that does not match up with a client's pre-auth (Service date is between start date and end date and matches code from pre-auth table) I have a simple text box that says "No auth for this code or service date" due to an IIF statement in a query. I'd like to take this a step further and give me the remaining units for the pre-authorization left when it does find a match.
What is happening is when it finds the authorization, it's not taking into consideration all the services I've done for that time frame. For example: I have a pre-auth from 12/1/12 to 1/31/13 for code 90806 for 12 units. I served the client for that code a total of 10 units thus far. I can't figure out how to link my 4 service records dated 12/3/12 (2 units), 12/16/12 (4 units), 12/27/12 (2 units), and 1/3/13 (2 units) to add together and then subtract from my auth for 12 units. I know the dates are the key but I'm lost.
Can I use a command button to display my table? If so, what code needs to be used?
View 2 Replies View RelatedI am trying to display a total based on 3 separate combo boxes in a form. there is a name with an associated number value using 2 fields. the values come from a linked value spreadsheet. the name field is "text" and the number is "number". the user selects their name and number using a combo box drop down window. this occurs 3 times in my form and i want to sum them in a 4th combo box. this is about how it should look, where "Total" happens automatically depending on the name selected.
Lewis 3 Smith 2 Parks 2 Total= 7
thanks for helping.
dave