I have read where you can drag fields onto the tab pages to create a form or you can place a subform onto a tab page, but can you drag an existing form onto a tab page?
I have done it and it is working, but I just wanted to know if this is ok to do or would it lead to problems.
As soon as I try to create a PivotChart, the form screen goes blank or the dropzones vanishes.
View 9 Replies View RelatedI'm having difficulty updating an existing record in my form. I can enter a docket number on my form and when i hit my button (Find Docket) it brings up all the customers info (name, date, invoice, vat, total, etc.) What i want to do then is be able to amend/update the record. Just wondering do i need to put vba code in my save button and how to code it and is it similar to my find data code below.
Here is my save function code:
Function SaveData() As Boolean
Dim db As Database
Dim rs As DAO.Recordset
Set db = CurrentDb
Set rs = db.OpenRecordset("Skips Delivered")
[Code] .....
Each month I receive a new excel spreadsheet (alpha Roster), Last month I created a form so that I can track certain things off of the Table (spreadsheet), I just received the new Spreadsheet for this month and was wondering if I can use the existing form and how hard it is to link it to the new spreadsheet? Is that even possible? I don't want to have to re create the form every month, I would like to just bring the new alpha roster in and be ready to work.
View 4 Replies View RelatedI'm having a bit of a problem with a database I'm trying to create, what I am trying to do is create a database to handle jobs in an IT workshop. The idea is that you generate the job card and then at the bottom you have a section to enter in the parts that are required for the job, and then have a report that prints out a list of all the parts required for all the jobs under a heading of the job card number.
The problem I am having is how to add this sub form / table to the job card sheet. I tried putting in a sub table, but that wont let me make additions to it, and I tried putting on a form but that wont retain more than one entry per job card (I have put it on continuous form).
I want to open an existing record via a form and then edit that data but save the form as a new record. Basically a form used for handover/takeover process where most of the data remains the same but the new form is the basis for the next handover/takeover.
View 6 Replies View RelatedI am trying to add a query in an existing form. When I click on adding a field, I get an option to show "all tables" for not queries.
View 3 Replies View RelatedI have a form with subform (datasheet) .
On my subform i have one field which shows the
productId ( which is filtered from combo boxes on main form) .
productId contains two columns
1 bound column(id) ( hidden with width 0 )
2 column (desription) ( shown with width 2 )
Now after entering the data when i come back to the form again . It hides the data from the productId field on subform , because data in combo box (on main form) doesn't match. Although the row is showing up , only the text in field (productId) is hidden.
Now when i change data in combo box on main form to match the ProductId , then the productId field text shows again. after changing combo box it hides . What i need is the existing data should not hide when i change the combo box selection.
see pic 1 where product matches and pic 2 where not. please note i am using master child relationship on the form/subform.
In the default property of a subform control I want to use a control of the main form without using names of forms, but using me and parent.
I used in default property of cboVATDetail: =Me.Parent!cboVAT, but it is not accepted. My aim is to use cboVAT of parent as default in cboVATDetail of child.
I have an access form with tab control pages each with embedded forms.In one page I have a list of records as a datasheet form with the record identifier field configured as a hyperlink. When I click on this it passes its value to a form field in the form in the following tab page (works without the hyperlink but its a useful way of highlighting which field to click) which is a display/edit form of the details of the individual record. The Subroutine which does this sets the focus on this field it is passing the value to on the other form and the 'On Got Focus' event in that triggers the query that fills the editor form.
When I click back on the following tab to select another record to view/edit, the identifier value of the other record is passed to the other form but the data displayed in the rest form doesn't change. I understand this is because the field with the 'On Got Focus' never lost focus and so the query function was not called. To correct this I tried adding the same function call to the 'On Change' event however this does not work (the field is a text box set to 'locked' if that is relevant).I can get the form to do a new query properly if I click on a different field in the form before going back to the list tab or (as this is removing the focus allowing the On Got Focus to work again) if I click on a button to select a different record (which just takes me back to the list form).
Is there any way I can get this to work without having to manually remove the focus from the problem field? I have tried setting its On Got Focus event to move the focus to another field after the query function call however this prevents the Setfocus line in the code in the previous form from working. Here is a snippet of my code below.This code is for the list form and passes a value to the editing form:
Private Sub SalesID_Click()
Forms!Mainform.Requery
Forms!Mainform!Sales_Admin_Form!Sales_Admin_SalesI D.Value = SalesID.Value
Forms!Mainform!Sales_Admin_Form.SetFocus
Forms!Mainform!Sales_Admin_Form!Sales_Admin_SalesI D.SetFocus
[code]....
I'm trying to make a very simple click through data entry screen in Access 2007. For each record I want to have a standard form with three buttons at the bottom. Each button opens a new form (each form has a set of tabbed pages on it as there is lots to enter).How do I make sure that each of the additional forms populate the same record as the main form.
View 1 Replies View RelatedI am attempting to create a Navigation Form to allow another computer in my network to be able to utilize necessary forms within a database (through RunTime). I was hoping this would be a clean task by simply loading the forms into the tabs of the Navigation Form, however that is clearly not the case.
For starters, When attempting to use a form that has some VBA behind it (Docmd.ApplyFilter based on a selection from a combo box), I am given the error stating: "The action or method is invalid because the form or report isn't bound to a table or query."
After searching on this error, I believe it's because my Navigation Form does not have a record source. If this is the case, then I am confused as to what record source it should have, as with the 3 forms I need to access through the Navigation Form all pull data between various tables and queries within the database (some not related).
Now I've also come to the conclusion that my VBA references now must change in order to correctly use my forms. A correct reference would look something like:[Forms]![Navigation Form]![NavigationSubform].[Form].[My Form's Control]..Is this necessary in order to write any events, such as an AfterUpdate on a combo box?
When I right click a row on the data sheet side of a split form an select "New Record" I want the curser to go to the first field on the single record side. I've placed this in the OnCurrent but it did no good.
Code:
If Me.NewRecord Then
Me!Descrfiption.SetFocus.
End If
Any way to set the focus to the single form Side of a split form?
My db has multiple linked tables. As time passes and work on a project continues data needs to be added to a separate table that is linked to the first table to be populated.
i.e., Initial design data is entered first, when drilling is complete more data is added to a linked table, when drilling is surveyed yet more data is added to the second table.
What I want to be able to do is to query for a particular set of existing design data, display this on a form and on the same line enable data entry to other fields from other tables which are linked to the existing design data.
I am trying to create a form where there will be information entered. The information being entered needs to be on two different pages, as they belong to two different tables. I would like to use the tab control. The problem I am having is that I want to be able to lock the second tab until all of the information on the first tab is correct and the employee entering the information verifies it. Is this possible and if so how?
View 5 Replies View RelatedI have a form that has many calculated fields(hidden and shown) based on the data in the source table. The calculated values roll up to a textbox(txtAward) that shows an award(Gold,Silver,Bronze) based on the total calculated points.
There is no inputting in the form. Its just used to display what was input and what the final award is.
txtAward isn't part of the source table but can be added.
How can I get the txtAward value into the table so I can do some reporting?
On a form I have a:
control called "FilterListBox"
list box called "lstCustomer"
option Box called "optCustomerType"
When the user selects an option in the option box, "FilterListBox" is updated to either "1", "2" or "1 or 2"..One of the fields in the query for "lstCustomer" is "CustomerType" and its criteria is set as follows:
[Forms]![frmPrintHowCustomersPaidInvoice]![FilterListBox]
if "FilterListBox" = 1 the query for "lstCustomer" returns the correct records
if "FilterListBox" = 2 the query for "lstCustomer" returns the correct records
But if "FilterListBox" = 1 or 2, no records are returned.
I have two combo boxes on the same form and for some reason one recalculates and updates and the other one doesn't. The control source for each is as follows:
=DLookUp("[03_END_PREP].[END_PREP_DESC]","03_END_PREP","[PDS_PREP] = '" & [PREP_A_subform] & "'")
=DLookUp("[OPT_DESC]","10_OPTION","[PDS_OPT_NUM] = [PDS_OPT_subform]")
Is there any reason why one would recalculate automatically and the other wouldnt? By the way, I've coded the second one EXACTLY like the first one except the proper tables etc were added, and it just doesn't work for some reason....
I have a tab control form with about 5 tabs. However when I move to the tab that has a datasheet form, the page moves down. You have to scroll up to see the above tabs. Is there something I'm missing on this simple tasks? Is it better to have it as a basic form for easier interface.
View 2 Replies View RelatedI want to have a spreadsheet type control in a form to be use for data entry and also to perform calculation. Is there a way to do that and save the data afterwards?
View 2 Replies View RelatedHow can I control the display of fields in a form? I see in a given database, that in the design view that some fields exist in a form but in the form-view some of them are not displayed.
I can't find how it was done, i see no difference in the fields' properties. Another question is how can i make a comboBox to display just the text without the ID number...
I have this code in a button on my Patient Form:
Code:
DoCmd.OpenForm "frm_Admissions", acNormal, , , acFormAdd, , "NHS Number|" & Me.[NHS Number]
And this in my Admissions form LoadEvent:
Code:
Private Sub Form_Load()
'Use this version if the ID is a number
Dim x As Variant
[Code]....
The expression you entered refers to an object that is closed or doesn't exist
Borrowed code from: [URL]
I have to create a control on a form that will be able to change to one of ten colors, some of them are subtle shades. I will be doing this from vba on the control. I know how to do all of this except defining the colors.
I keep seeing the 3 part RGB(xx, xx, xx) etc. but I can't find the values for it that will give me the exact colors that I need!
I also saw a possibility of using a the hex equivalent for the color but I couldn't make that work?
I have a main form bound to a query. Within that form, I have a button which calls up another form (pop up form). I simply want value of the "claim#" field-control to display in the "claim#" field-control of the pop-up form.
View 4 Replies View RelatedI have a form that the user enters employees daily duties. I have code to run sql after the BoxNum field has data in it. I want it to look at the BoxNum field and the dropdown box for the task to see if the entered box number has already been completed for the task selected on the form. Here is what my code looks like now. The code runs but gives me the msgbox no matter if it is a made up box number and I also get a syntax error 3075.
Code:
Private Sub Text13_BeforeUpdate(Cancel As Integer)
Dim rs As DAO.Recordset
Dim strSQL As String
[code]....
I have an Image control on a form which I want to examine programatically. It seems there used to be a way of doing it using Point and PSet from info I have seen online. Is this contained in any of the libraries available under References in Access and if so which one...
View 7 Replies View Related