Forms :: Dynamic Search - Subform Filter With Multiple Text Box

Oct 27, 2013

I wanted to build a dynamic search form using text box instead of the common combo box type.

I found an example that used the combo box and the searching portion of the code is as followed:

Code:
If Nz(Me.txtID, "") > "" Then
If Len(Nz(strFilter)) > 0 Then strFilter = strFilter & " And "
strFilter = strFilter & "CategoryID = '" & Me.txtID & "'"
bFilter = True
End If

How to insert (Like "*" & Me.txtID & "*") into the code to make the dynamic search using text box possible.

View Replies


ADVERTISEMENT

Forms :: Dynamic Filter With Multiple Possible Filter Criteria

Jan 26, 2015

I have a form that is showing data from 1 table. That table has 12 different fields on it and I want to be able to filter based on selections I make in a combo box in the header of the form. The filter string must be dynamic enough to allow filtering based on 1 criteria selected, or multiple criteria selected. For example:

If I have values in filter fields 3, 5, and 9 I'd want the filter string to be created as follows:

"...WHERE field3 = field3filter.value AND field5 = field5filter.value AND field9 = field9filter.value"

If I have values in only field 7, I'd want th efilter string to be created as follows:

"...WHERE field7 = field7filter.value"

And so on and so on.

I have created some filters before but all of the different VBA syntaxes I'm using seem to come up short.

View 5 Replies View Related

Forms :: Dynamic Search For Multiple Fields

Feb 13, 2015

Find the link by tacking on the following to this site's primary [URL] .....

It was, essentially, a type-and-show-as-you-go search functionality for an Access Form. It works great, except that I'm experiencing intermittent slowness when using the form. As I type, the characters appear very slowly and experience a significant lag time.

I only have about 70 records so far, so I'm pretty sure the slowness is not being caused by an overabundance of data. At other times, it goes super fast without any lag.

View 4 Replies View Related

Multiple Text Search On One Column To Filter Records?

Mar 6, 2013

I have a column that has a bunch of keywords they are separated by comma... so for each row of that column it will have a few different keywords example: lake superior, river, mountain, lake wollongong

I know its a bit of a nono with databases to have columns with comma separated text.. well so i read somewhere anyway but the document i have been handed to work has hundreds of rows in this column with up to 14 keyword entries.

I have a form that searches through Item's names based on 2 keyword boxes.

Here's the criteria in my query:

Is Null Or Like "*" & [Forms]![frmItemView]![SearchPhrase1] & "*" And Like "*" & [Forms]![frmItemView]![SearchPhrase2] & "*"

This will show all records when both keywords are blank, and filter records using the 2 keywords otherwise.

I have a form with two text boxes and have set the correct values as outlined in Evans post. I then have the query set to run via a button. I run it but it will only give back records for the entry i have put in the 1st text box. This would work well for me otherwise... mine is like this:

Is NULL or Like "*" & [Forms]![Searchtable]![Key1] & "*" And Like "*" & [Forms]![Searchtable]![Key2] & "*"

Searchtable being my search form
key1 being my first text box entry
key2 being my second text box entry

View 1 Replies View Related

Forms :: Search / Filter By Multiple (optional) Textboxes On Form

Aug 1, 2013

I'm relatively new to MS Access (using MS Access 2013 but the db should work on 2010, too) and try to develop a database for an NGO I'm working in. I created almost all the tables (all that I need for now) and made the relationships.

However now I start to create forms and later reports for the actual user. The database will store information about clients and track consultations and assistance the NGO gives to them. There will be around 50.000 to 70.000 clients in the main table. Every client has a specific Individual ID and is member of a family which itself has another specific Group ID.

Now here is my problem: The User usually searches for the respective family by the Group ID. I implemented this with a search query using the ID number of a search text box. All done and no big problem.

But sometimes the ID number is not known so the user needs to search by name (First and Last Name). I use to different textboxes for this and it works in a similar way like the number search by query (Like "*" & [Forms]![frm_SearchIC]![txt_LName] & "*"). All still good However since most of the clients are actually from arabic speaking countries, converting the names into the Latin alphabet is bound to fail and produce a lot of misspellings. Therefore I added 2 more textboxes and 3 comboboxes for the user to give more information about the client and therefore make it easier to search for the person. I was able to produce a query which gives you the right result if you have ALL information at hand. However, this is not always the case.

1) But I cannot find a way to tell the query that if the a certain textbox or combobox is empty, it shall just "ignore" it and use the information at hand. I tried this in the query by adding in the criteria OR .... Is Null. This is alright for one or two textboxes but for the many I have, it seems to be too many different combinations for the criteria. It just worked with some fields but others always had to be filled in...

2) If no information is given at all, the database should inform the user that he needs to enter at least on field. If nothing is found the user should get a msgBox saying "No IC matches your criteria".

3) The results of the searches should be given out in another form where the user can pick the person from 1-to-many results.

I attached a sample database with sample data and reduced tables, fields, and entries ...

View 6 Replies View Related

Forms :: Macro To Apply Filter - Search Multiple Fields

May 9, 2013

I'm trying to implement a macro to filter through accidents to see if my company has already been hired on a particular case.

In the first form the user enters the date, location, and last name of one of the drivers. Then they click a button which opens a new form as a datasheet with accidents that match ANY of the three controls. Evidently, I need a filter that contains some form of a series of OR operators.

However, whenever I try any variation of a button that opens the second form and then applies the filter, I always get no matches.

View 12 Replies View Related

Forms :: Applying Parameter Based Wildcard Search On Subform Filter

Jul 31, 2014

I have a Main form, and a subform which lists client details. On the Main form I have an unbound field. I want to be able to type a word into this unbound field and have it display all company names that have this word in them. ie. I type "Ltd" into the unbound field and it displays all companies with "Ltd" in the title.

I have created a query that does exactly this (Like ("*" & [Enter Word] & "*")), it displays a dialog box and I type in "Ltd" and it displays all relevant companies.

I have tried everything I know to make this work when I use the unbound field on the Main form, but I've had no luck.

View 3 Replies View Related

Forms :: Filter Subform Based On Text Box

May 23, 2013

I have researched but couldn't find any working filter criteria for subform criteria.i have used the code, searching the web but still no luck.I have attached the picture and sample northwind database (accdb). I just want to filter customers in Orders navigation using text criteria.

View 9 Replies View Related

Forms :: Filter Based On Multiple Selections - Referencing A Control On A Subform

Oct 23, 2013

I have a multi select list box which I am trying to use to open another form and apply a filter based on the user's multiple selections.

List box - lstCatergories
Main Form - frmSuppliersSummaryCategories
Subform on Main Form - frmSuppliersSummaryCategoriesSubForm

The Subform contains the text box CategoryID

Here's my code which nearly works...

Code:
Private Sub cmdFilterSuppliers_Click()
On Error GoTo Err_cmdFilterSuppliers_Click

Dim strWhere As String
Dim ctl As Control
Dim varItem As Variant

[Code] .....

My problem is that the control "CategoryID" is on the subform and I'm having massive problems trying to reference it. This is the part of my code that won't work:

Code:
DoCmd.OpenForm "frmSuppliersSummaryCategories", acNormal, , "CategoryID IN(" & strWhere & ")"

However; if I open the SubForm directly it works perfectly. I.e.

Code:
DoCmd.OpenForm "frmSuppliersSummaryCategoriesSubform", acFormDS, , "CategoryID IN(" & strWhere & ")"

To summarise... How do I reference the control "CategoryID" on the subform "frmSuppliersSummaryCategoriesSubform"?

View 4 Replies View Related

Forms :: Using Single Search Button For Multiple Text Box

Feb 22, 2014

I am creating search boxes within that searches customer by lastname, phone number, address and suburb. Will I be able to use one search button for all of them or do they have to be individual buttons?

View 4 Replies View Related

Forms :: Print Report Based On Subform With Multiple Search Criteria

Jun 14, 2015

I have a problem printing a Subform that uses multiple criteria(in textboxes) as filters.

The search portion of the form works fine. The problem is I have created a report based on the subform and am using the following code to open/filter the report

Code:
Private Sub PrintBtn_Click()
Dim strCriterion As String
Dim strMsg As String, strTitle As String

[Code].....

View 3 Replies View Related

How To Create Dynamic Search Forms?

Jul 28, 2006

Hiya guys, I need to create a form that works exactly in the same way as a query works, so there's a criteria text box on the top of the form and a list box displaying all results. I know a query does this but i need a user friendly way of displaying this information.

The search is for customer names and i need to display this information in a user friendly way because my users will need to search the database before deciding whether the customer has been inputted into it or not.

I tried to create this using a query having the criteria as the form's text box value (as an expression) but when I input values into the text box the query does not update unless i reopen the query in edit mode and perform a search manually.

My email is aabaaiaaa@gmail.com if any of you guys have any ideas! Thanks

Jay x

View 3 Replies View Related

Forms :: Date Range In Dynamic Search

Jun 18, 2015

I have utilised the code on John Big Booty's thread titled Dynamically search multiple fields (Thread #188663) to create a dynamic search feature

It works great however I would like to incorporate a date range filter into the results displayed in the ListBox.

Therefore the results would be dynamically filtered only if they meet the required date range.

The Date range data is on the form in a txtdatefrom and txtdateto textbox.

I have tried to adding a the ReleaseDate field with the following criteria to the query:

Between [forms]![frmSearch]![txtdatefrom] And [Forms]![frmSearch]![txtdateto]

however this has no impact at all.

How would I incorporate this date range into the query or VB Code?

View 6 Replies View Related

Forms :: Access 2003 / Dynamic Search Form Very Slow?

Nov 8, 2013

I am using John Big Bootys Dynamic Search Form (built in Access 2003) as it totally met my search requirements, however when typing anything into the search box it is realy slow, taking several seconds for each letter to show in the box.

This has always been a problem now and again, however some of us have upgraded to Office 2010, (although still using the 2003 built Db as we won't move to a 2010 version Db untill March next year) and now the problem is even worse that ever. Everything else seems to work really well except for this search function, however it is the search function that is used more that anything else.

View 1 Replies View Related

Forms :: Continuous Form Or Subform With Dynamic Record Source

Aug 16, 2013

I would like to know how i can have a continuous form or subform with dynamic record source.

Before I was using a list box with dynamic row source and i had not problem.

Now about the continuous form i have problem when i define record source of form on the fly how we have to add fields to the form.

View 3 Replies View Related

Filter - Subform _ Query , Multiple Combo Box

Jul 25, 2005

Hello All,

Thank you for taking time to view my access problem, I hope somebody can help / give advice on my problem.

I have a Form, within that form I have a subform. On the main Form I have several Combo Boxes.

ComboBoxes include; Year. Movie. Country.

What I want to do is when the user selects from the various values within each Combo Box to display the data in the subform accordingly.

I was able to use the Wizard to display the Movie Information correctly. The code is below for that. How can I go by doing this.


' Code to change the movie information, when they select the combo box
Dim rs As Object

Set rs = Me.Recordset.Clone
rs.FindFirst "[MovieID] = " & Str(Nz(Me![cmbMovieList], 0))
If Not rs.EOF Then Me.Bookmark = rs.Bookmark

I am very sorry if my question seems broad, ill try to be more specific upon request. THANK YOU for your time and your help.

View 3 Replies View Related

How To Search Subform With Text Box

Mar 5, 2013

how to search subform with textbox and button in form

View 2 Replies View Related

Multiple Filter With Unbound Text Boxes

May 21, 2015

The layout: I have form1 listed in continuous view. I have about 10 fields being listed. I have unbound text boxes for each field in the form header designated as a filter for each field.

Ideal world: Have each filter update records as you type. But I would also like for a "cascade" effect on the filters as well. Being that I can type in a few letters in FilterField1, and type in a few letters in FilterField2 and it would only display the records where the criteria is met for both filters.

What I'm not looking for: Only applying 1 filter at a time for 1 field. I have this setup now, but would like it to be more versatile allowing several fields to be filtered at once.

View 2 Replies View Related

Forms :: Search Text Box With Option Box As Criteria For Search

Mar 4, 2014

I am creating a a text box where the user enters a text then clicks an option from the option that is used as the criteria for the search e.g. Last Name, Phone , address then a command button wil run a query.

View 3 Replies View Related

Search Multiple Text Fields In A Table From A Form

Aug 8, 2006

Please bare with me as I am an Absolute Access VB code novice . I have a Form in my Access DB and I found the Following code on this site and placed it behind my search button :

Private Sub SearchButton_Click()
DoCmd.OpenReport "All users", acViewPreview, , "[AUP].[First Name] = '" & Me.[Text34] & "'"

End Sub

The Search works great but only searches on the 1 Field "First Name" . How would I expand the VB code to include another 2 fields within my table . ( the other 2 fields I want to serach appear on the Form ) .

View 4 Replies View Related

Forms :: Text Box Search On ID And Populate Other Text Boxes In Same Form

Nov 12, 2013

I am trying to search on EmployeeID field and populate corresponding data like EmployeeName, EmployeePay in other text boxes in the same box .

In my Unbound Form I have three unbound Text Boxes and one Command button:

txtEmpID
txtEmpName
txtEmpPay
cmdFind

In my table EMPLOYEE i have three fields

EmpID -- Autonumber
EmpName -- Text
EmpPay -- Text

View 2 Replies View Related

Forms :: Search And Filter Data Between Two Date Fields

Jul 29, 2013

I have a form in access where i need to select a record between two different dates. For example i have a "valid_from" and "valid_to" field. I have an unbound text box with short date format and calendar control inserted for users to select a date. This is named "drpdate".

I have a bunch of other filters also in the same form. Now my issue is that i have not been able to figure out how to put in a SQL statement which would give me the data which is between the "Valid_from" and "valid_to" fields based on the date selected in the unbound text box.

If the selected date does not meet the criteria, then it needs to be give the results from another table (which i have already done).

View 5 Replies View Related

Forms :: Search BETWEEN - Filter Query Showing All Records

Mar 14, 2013

I have created a form for a table which contains ~600 movies and their name, genre, rating, director, year it was made, and length (min).I need to be able to enter numbers into the two Year boxes, and then it filters the movies in my database and only shows me records from between those two years. The years in my database are just in one column in the format of: XXXX e.g. 1996 etc..I've tried the code:

Code:

Private Sub Year2_AfterUpdate()
Me.Filter = "[Year] BETWEEN" & Me.Year1 & "AND" & Me.Year2
Me.Filteron = True
Debug.Print "[Year] BETWEEN" & Me.Year1 & "AND" & Me.Year2
End Sub

Year1 and Year2 are the boxes Year: and To: respectively. [Year] just being the column name which contains all my years.When I try to run my query it shows me my records, but it shows me all of them! It doesn't filter it at all!

View 4 Replies View Related

Modules & VBA :: Text Field In A Form Updated Multiple Times When Filter Is Applied?

Sep 9, 2013

In my Access 2010 database there is a form with a large number of checkboxes enabling me to select/deselect certain record details.

Each click on one of the checkboxes triggers a VBA routine setting true/false values in one of several tables linked to the main table.

A query over all records is filtered by the true/false values of the linked tables and the resulting set of records is displayed in the (continuous) form.

The header of the form contains a text field with the value "=GetRecCount()" displaying (correctly, but randomly fast) the number of records selected:

Code:
Function GetRecCount() As String
Dim NumRecs As Long
Dim rs As Object
On Error Resume Next
Set rs = Forms![Super Search].RecordsetClone
rs.MoveLast
NumRecs = rs.RecordCount
Set rs = Nothing
GetRecCount = Format(NumRecs, "##,###")
End Function

Now, the funny thing is that each click on one of the boxes results in 1 call of the VBA routine setting table values, but 21 calls (!) of the text field "=GetRecCount()" in the form. I have established this by incrementing a public variable at each pass.

Why a field in a form is updated 21 times when a filter is applied?

View 4 Replies View Related

Queries :: Search Query Using Multiple Combo And Text Boxes

Aug 13, 2013

I have a table with all information on it, that is input via various forms, I then have different queries pulling information from all information to run reports off. These all work fine, my problem is my 'Search Form' - below

I have created a query that finds information from 'all information' using

Like "*" & [Forms]![SearchAll F]![txtDateRasied] & "*"

This is working on all text boxes, It only half works on the combo box's when I use

Like "*" & [Forms]![SearchAll F]![combofailureanalysis] & "*"

If a selection is made in the combo box the query brings the correct results, however, if all the fields are left blank it should bring up every record, but it doesn't do this. I am certain it is the combo box's that are causing this anomoly as when I remove the combo box criteria it works perfectly again.

View 11 Replies View Related

Forms :: Text Box Search To Populate Other Text Boxes?

May 10, 2015

I have a form with two text boxes and a button. I want to be able to type a value into the first Text box click the button and the second text box to be filled with the value which is stored in the Table.

The first Textbox is called barTxt, The second Textbox is called CustTxt The button is called SearchBtn and the Table is called BookInTable. I have been trying to use the code.

Code:

Private Sub SearchBtn_Click()
DoCmd.FindRecord Me.BarTxt.Value, , True, , True
CustTxt.Value = "SELECT BookInTable.Customer FROM BookInTable " & _
" WHERE Customer = """ & Nz(Me.BarTxt) & """" & _
" ORDER BY Customer"
End Sub

This however instead of displaying the Value for customer which is stored in the BookInTable. Displays The code SELECT BookInTable.Customer FROMBookInTable " & _ " WHERE Customer = """ & Nz(Me.BarTxt) & """" & _ " ORDER BY Customer"

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved