In Access 2010 I have built a FORM which has several records of several people. I am trying to email one record only to a certain person from that FORM. If I use the access email button it opens outlook but it sends all the records in the FORM to the person. I have tried even to use the micro, but still it attach all the records in the FORM and send it all as one bundle to other.
View RepliesI want to hyperlink from a query direct to the relevant record in a specific form. I have a hyperlink field in the form which shows up in the query. When clicked in the query, this hyperlinks to the form but I cannot make it select the correct record in the form.How do I get it to select the correct record?
View 3 Replies View RelatedI have a continuous form for which the recordsource is a query that retrieves dates from 10 days in the past to 10 days in the present. I want the record with today's date to be at the top of the form. The record with the oldest date is always on top. Is this a scrolling issue? How can I get the record with today's date to appear on top?
View 5 Replies View RelatedI've done this dozen's of time - but it doesn't seem to be working now. I have a continuous form (frmHome) where i want a user to be able to click on a record, and be able to open up that specific record in "frmCustomer". The key field here is pkCustomerID (i have it in the query).
frmHome is run off a query ("qryCustomer").
frmCustomer has "tblCustomer" as the source.
The code i've used on a button on "frmHome" is:
DoCmd.OpenForm "frmCustomer", , , "[pkCustomerID]=" & Me!pkCustomerID
It always only open Record #1.
1. I have created a button in a switchboard with embedded macro:-
Close Window
OpenForm (Form name: frmCustomerFind)
2. I have created a form "frmCustomerFind), in which I can select a customer name in a combo box named "CustomerName".
a. The row source: SELECT [tblCustomer].[CustomerID],[tblCustomer].
[CustomerName] FROM tblCustomer ORDER BY [CustomerName];
b. After Update Macro:
Open Form (Form name: frmCustomer)
SearchForRecord (Object Type: Form Object Name: frmCustomer
Record: First Where Condition = "[CustomerID]=" & Me.CustomerID
At the end, the form "frmCustomer" does open but not go to the record I want. It goes to the first record instead. (The frmCustomer has the "CustomerID" and "CustomerName" fields).
Need to open a form to a specific record.Ive done the command button wizard that opens the form to a specific record but but that brings up the form with the filtered button showing.I've tried to put the formula into the filtered section but that doesn't work.I just want to be able to open the form to the specif record and then be able to navigate to other records if required (without aving to press the filtered button)
View 1 Replies View RelatedCurrently, I have a form with tabbed pages in it. The second tab, I have a subform inserted into it. I have a completely separate form that looks through records. I want to be able to click on a record from the separate form and open the Main tabbed form, to the second tabbed page, to a specific record. Currently I have:
Private Sub Form_DblClick(Cancel As Integer)
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frm_Main_Data_Entry"
DoCmd.OpenForm stDocName, , , stLinkCriteria
Forms![frm_Main_Data_Entry]![pgAgreement].SetFocus
End Sub
Which opens up to the tabbed page just fine. but I can not figure out how to get to a specific record.
Also, the subform in the tabbed page, doesn't have the same controls as the Main tabbed Form itself, so when I add something like:
strCriteria = "Agreement_Number = " & Me.Agreement_Number
it won't work because it is not reading from the subform in the tab, rather its reading from the main form controls.
I have three forms: Form1 that contains subform1 and Form2 which is totally separate. Form1 contains a listbox that I use as a search form. When a record in the listbox is clicked, it populates Subform1 with more details.
If I am in Form2, I would like to be able to click a record which opens the listbox in Form1 to the same record (this will automatically update subform1 with the details).
I have a form that lists a number of orders (list box).
I have another form that has customer details as the main form and the order as a sub form and then another sub form for items....
How can I open the sub form to a specific record? ie I want to view order 14?
No I know this one has been done, and I have a form with a button that this works on. Here is my problem. I have a list of parts in a continuous form, I added a button to open that specific record in a detail view and it works just fine. I used an open form macro and put in the criteria
="[Description]=" & "'" & [Description] & "'"
I have tried to use this similar procedure for another form, it however has two subforms in it and I get a data type mismatch in criteria exception error. I suspect that it has something to do with the subforms but am not sure.
I have been trying for weeks to get my login form to open up to a specific record on the mainform. I have built a form out of my Employee tbl (mainform). The table stores (ID,Name, password, EmpNumber ect.) I built a subform in that allows the user to type in the number of overtime worked on a paticular day. I have disabled the navigation on the main form so users can't advance to the next user but have enable the natigation on the subform so a particular user can advance to the next week of available overtime to input data.The goal is to get user login form to display a particular record on the main form and open a different form in the user is a supervisor.
Option Compare Database
Private intLogonAttempts As Integer
Private Sub cmdExit_Click()
DoCmd.Quit
End Sub
Private Sub cmdLogin_Click()
[code]...
'If User Enters incorrect password 3 times database will shutdown
intLogonAttempts = intLogonAttempts + 1
If intLogonAttempts > 3 Then
MsgBox "You do not have access to this database. Please contact your system administrator.", vbCritical, "Restricted Access!"
Application.Quit
End If
End Sub
I have a main form with a continuous sub-form. On the main form I have a series of text boxes that I want to use as a makeshift status bar. The text boxes would be filled in if a value was entered into certain records on my sub-form.The problem I have is since the sub-form is continuous, how would I refer to the specific record on the sub-form that I want to check for a value?
View 6 Replies View RelatedI'm wanting to open a record in another database, below is the code that opens the form to the correct record in the DB I want to open.
Code:
Private Sub btnDetail_Click()
DoCmd.OpenForm "fJob", , , , , , Me.Name
Forms![fjob]![txtJobNumber] = Forms![fJobAlphabetic]![fJobAlphabeticSub].Form![JobNumber]
End Sub
I have a form that displays details for a specific asset and a continuous subform that lists all the purchases for that asset. I have the following code in the On Click event for one of the fields in the subform:
Dim myOrder As Integer
myOrder = Me.txtOrder
DoCmd.OpenForm "frmOrders", acNormal, , "OrderID=" & Order, acFormEdit, , "Edit"
The problem is, when I click on any item in the subform, the code returns the value of the first item in the form rather than the one clicked on. If I open the subform on its own (outside the main form) then the code works fine. I can't figure out why it won't work in a subform.
I have a form that opens from a different form based on the primary key within the original form. Unfortunately it seems to be opening a new record every time I open the form--not only from the original form but also straight from the sidebar.
The command button that opens the second form from the first uses the following VBA:
DoCmd.OpenForm "ZooMobile Incomplete Booking-Return Client", , , "[Event_ID] = " & Me.EventID
This exact coding worded perfectly in a similar set of forms that I had created; the only difference is a change in the form name & primary key field.
Add onto this, I think that the code DOES work, but then it immediately opens another new record. When I open the second form from the command button, then change to Design View, the form's Filter property is set to [Event_ID]=X (where X is the proper key from the first form) and Filter On Load is set to Yes. The X in the Filter changes accordingly when it changes in the first form. Also, every time I open the form a new record is added to the underlying table.
I've tried setting "Allow Additions" in the second form to No, but then when I open the form nothing appears. Literally; the entire form is blank, no labels, textboxes, combos, buttons or anything. When going to Design View it's still all there.
I've also checked the On_Load, On_Current & Form_Current events and found nothing. I even deleted them and the problem still occurred.
I have created a Datasheet Form which when opens shows lots of records. I was looking to see if there was a way that if i clicked on a specific field name within a record it would open a new form with all the information of that record only.
View 5 Replies View RelatedI have a form "frm_PatientNew" based on table "tbl_patients", this form contains a button "cmd_NewVisit" which is supposed to do the following: opens the form "frm_NewVisit" for recording a new visit for the last recorded patient in "tbl_Patients", I found many approaches depending on DMax and Dlookup and they worked fine just if "frm_NewVisit" is bound to "tbl_Patients", but "frm_NewVisit" is bound to "tbl_Main" which acts as a container for all information (patient data, visit data,service done and service provider), so the form "frm_NewVisit" contains fields from different tables. I wonder if I should create "frm_NewVisit" as unbound form, then adding fields from different tables to it and using vba to populate "tbl_Main",
View 2 Replies View RelatedAccess 2010. I have a form pulling from a query to create a "To Do' list of sorts. On this form is a button to open an input form for the corresponding record (I hope). When this button is used I want it to pull certain data for that specific line from the query and input it into the new record opened by the button. I know this is possible as I use another db that does this but I have not been able to figure out how to make it work in the new db.
View 14 Replies View RelatedI have a database that I can use to create a query, grouping companies by city. I then want to send a specific email I have created in outlook to all of the email addresses in the query.I do not need to include names.
View 6 Replies View RelatedI am trying to figure out how to make a button that sends an email to a specific email address, containing the information from 1 row.
we have rows where we put the the address, the quantity and the time interval we can collect the packages in. these information have to be send to a trucking company. I want access to send an email to the trucking company's email address, and not a whole report of all the rows, but be able to choose to send row 1,2,3 etc.
I'm trying to send at report based on a Query from a specific form.
Everything is (almost) working fine, except the fact that I can't get a criteria into DoCmd.SendObject method.
My code is:
Private Sub Kommandoknap212_Click()
On Error GoTo MailTilGodkendelse_Err
DoCmd.DoMenuItem acFormBar, acRecordsMenu, 5, , acMenuVer70
Dim MailAtt As String
Dim intSearch As String
[Code] ....
I am new to access i have a problem which is i have made a form which contains a subform and a read only subreport, what i want is the ability to select a record in read only subreport as in the picture attached and make a button that when i press on it, it should copy the values of the itemsID field, Packing field, ContainerNo field and origin field from the selected record and then paste them in the subform below.
Also i want to add more then one item, so the when i press on another record it should paste the values below the first record.
I have a main form and a nested subform. The main form is based on customer details and displays customer name and the customer primary key (custID). When this form is opened i pass two parameters to it, BPID and SIID. A BP is a business picture and a SI is a sales interaction. These are in a one to many relationship.
The subform displays a sales interactions (si) of a business picture (bP).The subform is set up with master child links of custid;bpid. This restricts the subform to only showing records for the a specific customer and specific BP (the user can cycle through all the linked SI's using the record selectors.
When the main form is opened I want the subform to display the sales interaction the user has selected when opening the main form based on the passed SIID but cannot get this to work. At the moment the subform just displays the first record.
I want to autofill in a text box with reference to a table I have in Access.I have the first text box that returns the first record in the table i want to get the data for with "text1 = Dlookup("numplate", "cars", "")
This returns the first record. I want the second text box to return the second number plate from the table.How can I get the second record to be returned...?
I am new to Access. I am using Access 2010. I have searched and found several articles on emailing the current record shown on a form but haven't been able to get any of them to work.
My goal is to have a user input information onto the form and then have one button the user will click that will save the current record, email the current record in pdf, and then close the form.
The form name is: frmCorrectiveActions. The unique identifier for a record is: Corrective Action ID.
The last coding I tried is below. I know something is wrong but have copied this code from another post about emailing forms so I'm not even sure what half of it means.
I am getting the message Run-time error '3075': Syntax error (missing operator) in query expression "Corrective Actions ID = 23' and when I hit debug this is highlighted: qry.SQL = strSQL
form Private Sub Email_Click()
Dim qry As DAO.QueryDef
Dim strSQL As String
Dim ReportQueryName As String
ReportQueryName = "qryCorrectiveActions"
Set qry = CurrentDb.QueryDefs(ReportQueryName)
[Code] ....
I can open a report right with a wherecondition that opens a report based on an agent name..
DoCmd.OpenReport "SelectPSReport", acViewPreview, , "[PS_Agent]='" & Me.CboAgt & "'"
But it returns every record for that agent and I want to be able to specify the date that goes with the name.
For example Tom has a record for Feb 10, Jan 10, and Dec 13. I only want to see the record for Dec 13.
I am able to see this in my form by having a combo box for the agent and the date (the date box being based on the agent box). So now how can I add a condition to include the date combo box?
DoCmd.OpenReport "SelectPSReport", acViewPreview, , "[PS_Agent]='" & Me.CboAgt & "' And [PS_dDate]='" & Me.Cbodt & "'"
Adding the condition gives me and type mismatch error, which I think may come down to the date combo box on the form having 3 columns (only 1 is visible).