Forms :: Enter Parameter Value For Subform Search

Apr 8, 2013

I have attached a (slimmed down) Access 2007 database used for Asset Management and fault reporting. It opens on the main form which has a number of subforms and one sub-subform.

To make the form as user friendly as possible I am placing a number of unbound text boxes on the FormHeader to be used for search queries. The AfterUpdate event for each text box executes the necessary query, searching on the contents of the text box.

This works absolutely fine for the 'Colloquial Name' text box and associated field - this field is in the main table, RTI_Assets. The main form frmRTI_Assets is bound to this table. The query executed is called 'Colloquial Search'.

I cannot however get the 'Fault Reference' search to work on the field Supplier_Reference in the RTI_Fault table (the subform subfrmRTI_Fault is bound to this table). The query executed is called 'Fault Reference Search'.

There are 15 records in the assets table and 2 records in the faults table - with supplier references 555 and 101010.

I get prompted with Enter Parameter Value for the field RTI_Fault.Supplier_Reference if I enter 555 in the text box. Whatever I enter in this prompt I get returned to the first record.

View Replies


ADVERTISEMENT

Forms :: Applying Parameter Based Wildcard Search On Subform Filter

Jul 31, 2014

I have a Main form, and a subform which lists client details. On the Main form I have an unbound field. I want to be able to type a word into this unbound field and have it display all company names that have this word in them. ie. I type "Ltd" into the unbound field and it displays all companies with "Ltd" in the title.

I have created a query that does exactly this (Like ("*" & [Enter Word] & "*")), it displays a dialog box and I type in "Ltd" and it displays all relevant companies.

I have tried everything I know to make this work when I use the unbound field on the Main form, but I've had no luck.

View 3 Replies View Related

General :: Subform Enter Parameter Value Error

Aug 11, 2012

I have 2 form

main form = "TanggalF"
subform = "MerkFsubform"

I have a query with 2 field "Combo28" and "Combo30"

I use it in subform with query [Forms]![MerkFsubform]![Combo30]

Combo30 is combo box on MerkFsubform

If I open in subform "MerkFsubform" work, no problem

but if i open on main form "TanggalF" it get errror "Enter Parameter Value" Form!Merksubform!Combo30

View 3 Replies View Related

Forms :: Can Use Enter Parameter Value Dialog

Feb 1, 2014

Can I open a "Enter Parameter Value" dialog box to capture and use the input without running a query?

something like

Code:
ParaBox ("Enter the Hostname", vbEntParameterVal, "Hostname Required")

or

Code:
Set pDialog = Application.ParaValueDialog(mso?????)

I need a short string input from the users at application load, and I'd like to use the "Enter Parameter Value" dialog.I'm about to build a workaround that will invoke a SQL statement to save the entry to a temp table, but it'd be nice if I could just call up that dialog box and store the entry as a VBA variable.

View 3 Replies View Related

Forms :: Remove Enter Parameter Value

May 26, 2015

I can not remove the Enter Parameter Value. In the attached date base, go to frmEvents, and double click on one of the shows, and you will get that error. I have deleted lines of code, text boxes, and anything else that is associated with the txtSearchS.

View 14 Replies View Related

Forms :: Enter Parameter Box For Every Filter

May 28, 2013

I have a form which contains a listbox sourced from a query and several text boxes where the user can enter filters for the query. The query has references back to the form for the criteria, i.e. the filter for "Company Name" is handled in the query criteria as

Code:
Like "*" & [Forms]![HooversProspects]![SearchText] & "*"

When i exit this form in my un-compiled version it does not pop up an "Enter Parameter" box, however, when i exit this form from the compiled version it pop ups the "Enter Parameter" box for every filter I have.

How i can fix this? Perhaps change the rowsource on the query to null upon exit?

View 3 Replies View Related

Forms :: Enter Parameter Value On Unbound Field

Nov 27, 2013

I'm using Access 2013.

My scenario is: I have a Form to add Job Logs. This form has a cascading combo box with Clients filtering Projects. However, the Clients Combo Box is unbound, Projects is bound to the ClientProjects ID. I had to do this instead of have a key for both Clients and Projects in my Job Logs table due to the fact that Clients and Projects have a many-to-many relationship.

For Adding Job Logs this is fine.

My Problem: I have separate forms for viewing and editing Job Logs, and naturally, because Clients has no binding, every time I run these forms Access brings up the 'Enter Parameter Value' Message Box. I have tried a VB script to assign the Client ID based on the ClientProject ID value stored in the Projects combobox, on Form Load, however it still asks me to enter the Parameter Value and just writes the code in the combobox. Here's the Script:

Private Sub Form_Load()
Me.SelectClient = "SELECT Client ID, Client Name " & _
"FROM Client Projects Query " & _
"WHERE ClientProjectID = " & Me.SelectProject.Value
End Sub

Also, the Projects Combobox is also empty.

View 11 Replies View Related

Forms :: Enter Parameter Value On Fields No Longer Existent

Jun 24, 2014

I have access 2013 and this database is on a windows 8 OS,

I created 2 fields to sort data sets, and later discovered there were redundant and i could use values from a different linked table. After deleting those fields, when i open the form they still pop up as an "enter parameter value for *****" .

View 3 Replies View Related

Forms :: Updating Record On Table - Enter Parameter Value Dialog Box Appearing?

May 16, 2015

I am having a problem updating a record on a table called BookInTable . The field I want to update is called Engineer and the record is found using the field Barcode. I have a form with 2 text boxes BarTxt and EngTxt as well as a button called SaveBtn. on the OnClick event of the SaveBtn I put the following code

Code:

Private Sub SaveBtn_Click()
If IsNull(Me![BarTxt]) Or (Me![BarTxt]) = "" Then
MsgBox "Please enter a value!", vbOKOnly, "Invalid Search Criterion!"
Me![BarTxt].SetFocus
Exit Sub
End If

DoCmd.RunSQL "Update BookInTable SET Engineer = " & Me!EngTxt & " WHERE BarCode ='" & Me![BarTxt] & "'"

End Sub

But this is bringing up the enter Parameter value dialog box for whatever I type into EngTxt. If I enter text into that box and then click okay it then updates to the record. how can I stop the from enter Parameter value dialog box appearing?

View 2 Replies View Related

Forms :: Enter Tracking Number - Click Button To Search Record On Form

May 24, 2013

I currently have a database where new records can be entered in a "New Part" Form and Records can be viewed(but not altered) in a "Part Search" Form. The forms are the same except one is allowed to edit. I have also created another form where I am trying to search the "Part Search" Form via a tracking number. I want to have a text box where users enter a tracking number then click the button to take them to the record on the "Part Search" Form.

View 2 Replies View Related

Forms :: Enter Data To Subform With Autopopulate

Jun 24, 2015

I know the way to SELECTDISTECT on a combobox referring to a table so the value will autopopulate in the combobox. But is that doable in a subform?

I have a table with 3 columns. First Name, Last Name, Relationship.

I want to let the user adding data directly to the subform, but when typing RICHARD in the first record of First Name, then on the second record, when they type R, it will suggest RICHARD, a kinda auto fill if desire.

View 11 Replies View Related

Forms :: Make Certain User Enter Records On Subform Before Attempting To Save Main Form

Dec 4, 2014

How can I make certain my user enters records on a subform before attempting to save the main form? Right now they can completely ignore the subform before saving the record.The Main form has business address, etc. on it. the subform is bound to a join table that lists the multiple categories, subcategories and sector the business is listed in for a directory.

I already have my fields set to required at the table level in the join table, and have some existing VBA in both my subform (to update edited date) and my form (to validate empty records where a certain condition is met) but that's not the issue...

How do I focus the user to enter a record on the subform to the point where they are forced to enter something and complete the subform before the record is updated.

View 2 Replies View Related

Enter Parameter Value

Jun 8, 2005

I have a form and it is related with a query and by clicking ok I got the required results in Access 97. But now I have converted to Access 2002 and whenever i enter values in the form and click ok I get a Dialog Box "Enter Dialog Box". I read MKB article but it did not help me at all. Please help me out I am not getting any idea at all to solve this problem?

View 6 Replies View Related

Enter Parameter Value

Jun 1, 2007

I have searched other threads and cannot find one that helps solve my problem. So, I hope someone can help.

I have a query which runs ok until it is filtered. I have tried using criteria to filter the info I need but this returns an 'Enter Parameter Value' message. Running the query without using criteria works okay but using a filter in the report itself returns a 'Data Mismatch' message.

The report filters fine on fields until it gets to one that has been changed from text to number. It also includes an Nz formula. The formula in the is field is: CLng(Nz([order_no],0)). Other fields related to this also appear to be affected.

I need the CLng formula as the field is needed to calculate other fields using a zero instead of a null which would otherwise cause an error. I was given the formula on this forum yesterday, (thanks Bob Larson and AlanJ10), which was great in solving the other issue but is this is what is affecting filtering, (ie. a confusion between text and number?!?!) I have also tried converting the result of the calculation I want to filter back into text using CStr but this does not make any difference.

I have checked the field names and also renamed fields that were 'Expr' (as in default names for calculated fields), and cannot see any problems.


Thanks

View 5 Replies View Related

Enter Parameter Value (need Help)

Sep 29, 2007

I have a query and one of the fields/headings i have it create is a "cost" total where it does a dlookup from a defaults table.

I then have a "listprice" which is antoher field in the querry of which the data table sits.

I want to take the [listprice] and minus the [cost] without re-creating the dlookup function...

I need this to help with an APR calulction using the RATE function which if i have it do all the dlookups it says I have exceeded the limitiation and will be trumcated. So if i use the name [cost] it works but i have to hit enter because it says "Enter Parameter Value".

Any ideas how to get around this?

Thank you.

View 1 Replies View Related

Enter Parameter Value

Jan 26, 2008

I have the following query that gives me this halt. If I enter without responding to it it opens in Datasheet view as intended. It wants me to enter Query2.EmpID. This is my SQL statement.

SELECT qryPolicyByDriverName.CWSPolicy, qryPolicyByDriverName.EmpID, qryPolicyByDriverName.DriverName
FROM tblTrainingPoliciesNotCoveredDrivers INNER JOIN qryPolicyByDriverName ON tblTrainingPoliciesNotCoveredDrivers.CWSPolicy = qryPolicyByDriverName.CWSPolicy;

I don't know why this is happening. Thanks for looking at my problem.

View 2 Replies View Related

Enter Parameter Value

Jul 9, 2005

ok im am not sure if this is in the right place but it seems to be a form problem.
i have a form that has a textbox(text1) which is used to enter a supplier name, the user then presses enter and another form opens up with all the supplier details.ok.
the code i have to do this is on the afterupdate of text1 which is unbound is
DoCmd.openform"SupplierDetails",,,"[Supplier Name]=" & Supplier name
when i use this code and the enter key is pressed an `Enter Parameter Value` dialog box appears with the supplier name under the blue title bar.if i then enter the supplier name again it opens the second form and displays all the details i want.
If i use the code
DoCmd.openform"SupplierDetails",,,"[Supplier Name]"= me.Supplier_name
it opens up the second form without the dialog box but it doesnt display any details.
is ther any way to adjust the first code so the dialog box isnt displayed and just goes straight to the second form and displaying the details.
i have gone through as many posts as i can but cant seem to find a fix.

any help would be appriciated thanks

View 14 Replies View Related

Is It Possible To Enter The Contents Of The Parameter Value Box?

Jul 13, 2007

Does anyone know if it's possible to edit the contents of the "Enter Parameter Value" Box...for starters, I'd like to delete the phrase "Please Enter Parameter Value" as it means nothing to most users of Access; also, I'd like to format the text that I've entered in the query itself, i.e. make it bold, increase the size of it.

Incidentally, I did go down the route of linking my query to a form but this caused problems as I want more that one user to be able to view their particular parameter value at the same time.

Many thanks

View 13 Replies View Related

Mystery 'Enter Parameter Value' Pop Up!

Nov 8, 2006

Hey all,

I have been looking everywhere on a search form and its related queries / tables for a missing value / error that causes this pop up:

Enter Parameter Value
=Date()

The report opens fine once that parameter error is cleared, and I cannot find what it is refering to at all. Does Access have any tools to help me track that down instead of blindly looking at every component piece by piece and hoping to stumble upon it?

I found the code below to clear P.V. errors (I think anyway - I would rather figure out what is causing it, but after way too much time spent on it, I still have had zero luck), and I have toyed with this and am having no luck:

Private Sub Report_Open(Cancel As Integer)
On Error Resume Next

Dim ctl As Control
Dim var As Variant
Dim rst As DAO.Recordset

Set rst = CurrentDb.OpenRecordset(Me.RecordSource)

For Each ctl In Me.Controls
var = rst(ctl.ControlSource)

If Err = 438 Then ' Control has no Controlsource-property
Err.Clear
Resume Next
End If
If Err = 3265 Then ' Controlsource doesn't exist in recordsource
ctl.ControlSource = ""
Err.Clear
Resume Next
End If
Next ctl
End Sub


As always, any and all help is very appreciated!

View 1 Replies View Related

Reports :: Enter Parameter Value

Jan 15, 2015

I am trying to create a report, filtered on a combo box(txtname).This combo box is having a list of names.I have one query(mainquery) based on a single table(maintbl).I created a blank form(GenerateReport) with abovementioned combo box(txtname) and a simple button, which will open a simple report.In mainquery, under names column i am defining the criteria:

[Forms]![GenerateReport]![txtname]

Report is being filtered accurately.But when I open query i receive error 'Enter parameter Value'

View 8 Replies View Related

General :: Enter Parameter Value

Feb 23, 2015

why I get a pop up asking for parameter value of fields I no longer have in my table? It says this when I open my form. I deleted the fields from my form but it's still asking for it.

View 2 Replies View Related

Modules & VBA :: Enter Parameter Value

Apr 16, 2015

i have the following code

Dim str As String
str = "select combination from tbl_userinformation where Username= txtuser.value AND actualdate=txtdate.value ; "
If DCount("*", "tbl_userinformation", " [05-Henrichpiramid]=true AND " & _
"Username = '" & Me![txtuser] & _
"' AND [actualdate] = " & Format(Me![txtdate], "#mm/dd/yyyy#")) > 0 Then
DoCmd.RunSQL (" update tbl_userinformation SET combination = str &'05-Henrichpiramid' where Username= txtuser.value AND actualdate=txtdate.value ;")

but when i run it it asks me for enter parameter value for str

View 4 Replies View Related

Reports :: Enter Parameter Value Again

Oct 20, 2014

I have a command button that opens a report.In one of my reports, this macro works:

Code:
="[eEmployeeID]=" & [eEmployeeID]

However, in another command button that should open another report, the code below does not seem to work:

Code:
="[echEmployeeID]=" & [eEmployeeID]

It just keeps giving me errors saying that there's a mismatch, etc. The field in my report that holds Employee ID is named echEmployeeID. If I write this code:

Code:
="[echEmployeeID]=" & "[eEmployeeID]"

it sort of works, but Access asks me to enter parameter value first before executing the where condition. I already tried to change [echEmployeeID] to [eEmployeeID] both in the source table, and the report but it just doesn't work.

View 3 Replies View Related

Unwanted Enter Parameter Value Box

Oct 23, 2014

I have a query with several different columns. One Column, CodeNum is built based on the values in Expr4. When I try to set a criteria for CodeNum (Like "8*"), and I run the query, I get a popup for Expr4 ("Enter Parameter Value | Expr4). I want to get all values of Expr4 when CodeNum starts with an 8.

CodeNum is built as follows: JCC: Left([Expr4],InStr([Expr4],"/")-1)

View 3 Replies View Related

Form Enter Parameter Value Pop-Up

Apr 20, 2014

I have Created This Macro (Photo1) to Display Clients Home Address on A Bing Map, however, When I run Code I get A "Enter Parameter Value" Pop-Up. (Photo2) When I actually enter ClientID number in this case 5 it Does what I want See (Photo3). How do I get it to open directly to form with out Enter Parameter Value popup?

View 2 Replies View Related

Forms :: Filtering Pivot Chart Subform By Parameter Without VBA

Jun 28, 2013

I have a pivotchart subform who's Filter Property I've set to:

Code:
[EEIC_ID] In ([Forms]![MainDataControl].[EEICBuffer],0) And
IIf([Forms]![MainDataControl].[TypeIDBuffer]="",[AG_TYPE_ID] Like "*",[AG_TYPE_ID] In ([Forms]![MainDataControl].[TypeIDBuffer],"")) And
IIf([Forms]![MainDataControl].[AgencyBuffer]="",[AGENCY_ID] Like "*",[AGENCY_ID] In ([Forms]![MainDataControl].[AgencyBuffer],"")) And
IIf([Forms]![MainDataControl].[FacilityBuffer]="",[FACILITY_ID] Like "*",[FACILITY_ID] In ([Forms]![MainDataControl].[FacilityBuffer],""))

The issue is that none of the parameters are recognizing the textbox controls even though the references appear to be correct. Per access.mvps.org/ access/forms/frm0031.htm, I've attempted several versions of the syntax.

I believe that I've done this successfully in several other forms, though none have been been via a pivotchart. What's more, this exact same filter string worked when the pivotchart was its own popup and the referenced form was a separate window. Once I embedded it (being the pivotchart) as a subform, however, I began to be presented with the "Enter Parameter Value" dialog, even though the control's address had not changed. Note: the form with the embedded pivotchart is separate from the control's parent form.

In essence: the filter property of a pivotchart subform has a parameter that references a control on a seperate popup form, and every one of the syntactual statements I've tried returns an "Enter Parameter Value" dialog (where they did not when the pivotchart was not a subform). I've also attempted to isolate this issue by putting the text box controls on the parent form (rather than the separate popup form) and referencing them via the pivotchart subform, but this provided no resolution (the same thing happened).

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved