Relationships all work and reporting works. I now want to create a form for entering attendance into a single event as a batch. I only want to enter the event ID one time and then be able to enter participant ID's for all attendees. The event coordinator will have a tablet running the db at the door and each participant will use their ID card to be scanned into the event.
I don't want the coordinator to have to reselect the correct event between each participants scan but instead to enter the event once and have multiple participants ID's entered for the one event. The date field is defaulting to current date/time [Now()].
I have a form, which registers attendance at an event, with three fields - ID (a combo box), Name, and Present.
When an attendee comes in, they give their number which is entered into the first field. Pressing carriage return, their record is loaded, and I can then check the 'present' field. Then I click the next button and await the next person!
I'd like the simplify the whole process - so that as soon as the 3 digit attendee number is typed, the present box for that record is checked, and the form is reset (curser back to the combo box to search for next record).
In short - all the registrar ever has to do is enter a three digit number!
when pressing the return key (in a textbox field within a form) an action should be fired, but it does not.
here is my code: ************************ Private Sub txmyTextbox_KeyPress(KeyAscii As Integer) If KeyAscii = 13 Then MsgBox "Return key pressed" End If End Sub *****************
Hi, I am not entirely sure where to look in the forum to answer this question, maybe someone can help me. I am just trying to create a simple code that would open a form if a user enter in a field a value that never has been entered before and open a other different form if the user enter a value already recorded. I can't find a 'not in recordset event', but there must be a way as when the form is set to Data entry with no duplicates an event occurs depending on the data being already recorded or not.
i dont want a user to be able to change a value in a combo box if a textbox is not null. im not sure what to add on the onenter event. is there not somthing like cancel=true
I've got an attendance form set up with check boxes for each day I want to check attendance. I have two problems with this form.
1) All the boxes start out with little squares (I want them to be blank) 2) If I try checking a box for one person, it checks all the boxes in the column (same with unchecking).
I am using a form to input attendance data. I would like to know how to log an individual as being out on vacation for a week, month or so without having to input the staffs name and date for each day they are out. Would like to Enter their name once with the date range they will be away from the office.
I have a table called Attendance were information about the Student and the class they are attending is collected.
Another table called Student, this hold information about the student. I am using a Form called Attendance to input my information. What I am trying to achieve is:
BeforeUpdate on a text box:
When you input Student_ID it looks at the Student Table to see if the Student ID is valid before the information is updated to the Attendance Table.
I'm creating a Gym Database and need to be able to track attendance for specific classes. I need to have a system in place allowing me to do a register for attendance for each activity.
I also need to be able to calculate fees based on attendance. So if a person attended Gym 5 times in the month (£5 per session) and then Swimming 3 times in the month (£2 per session). My system should automatically calculate this based on the attendance tracking.
Also: In the booking stage, I need to have a field telling me how many spaces are left on each activity. Say for example I'm booking Person 99 in for Swimming and there is only 11 places left I need the field to display 11 places left. After that booking it should update saying 10 places left because Person 99 is booked in.
I am trying to make a database for my employees to count their attendance according to the days of the month and then get their salary. How to create a form that show the days of the month and then i can add the names of the attending employees.
I have a listbox on a subform (or a subform within a subform).
When it is clicked I want all other listboxes to unselect.
There may be listboxes on the mainform, on other subforms, on other subforms of subforms.
I imagine I'm looking at a recursive function of some sort, but I'm not entirely sure of syntax to identify parent and children forms...
pseudocode so far: loop all controls if control = listbox, unselect all if control = subform - recurse: loop all subform controls if control = parent... err... Fail.
In ContactIDForm it contain 1 textbox name 'TextBox' with Button Name 'Btn'
In ContactIDForm there is only 1 Text Box ContactIDTextBox and 1 Button. User Enters ID in TextBox and On Button Click Event it should check data from TextBox in Table name (ContactDetailTable) in field ContactID and if there is record matching, ContactInfoForm should Open else NewContactForm should open with ContactIDTextBox value in it.
Any sample database where its about Time In and Time Out Attendance. It will just calculate the difference of Time In Time Out with employees Card Number.
The Time In and Time Out attendance is provided (no data entry), it is generated from other tool. I will just load it from an excel sheet to the access database and it will calculate and generate report. Default should be 9 hours per day, if they wont render 9 hours it will show in Difference column. Form will be like this:
ID Num: | Name: | Time In: | Time Out: | Total |Difference (missing hours)
12345 | Al Smith | 8.00am | 5:00pm | 9 | 0 54321 | Joy Pitt | 8.00am | 4.30pm | 8.30 | -0.30
I have a main form that holds a tab control with a number of sub forms. One of these subforms has a pop up form for adding new records to it. After closing this pop up form I would like to initate code on the sub form where the new record now will appear. One of the things I like to do is simply to set focus to the record the user just added.
My problem is that I cannot seem to get any event to trigger in this setting (bben trying more or less all). If I understand things right the fact that I am using a pop up form and the fact that I am using a tab control both seem to interfer with the Activate event and making it passive.
How I can trigger code on the sub form (after closing the "Add New" pop up form)?
I was able to enter data into my form but I made a few design tweaks and added another table into the form and now, in form view, I''m unable to enter data into any field.
Can I open a "Enter Parameter Value" dialog box to capture and use the input without running a query?
something like
Code: ParaBox ("Enter the Hostname", vbEntParameterVal, "Hostname Required")
or
Code: Set pDialog = Application.ParaValueDialog(mso?????)
I need a short string input from the users at application load, and I'd like to use the "Enter Parameter Value" dialog.I'm about to build a workaround that will invoke a SQL statement to save the entry to a temp table, but it'd be nice if I could just call up that dialog box and store the entry as a VBA variable.
I can not remove the Enter Parameter Value. In the attached date base, go to frmEvents, and double click on one of the shows, and you will get that error. I have deleted lines of code, text boxes, and anything else that is associated with the txtSearchS.
I have a form which contains a listbox sourced from a query and several text boxes where the user can enter filters for the query. The query has references back to the form for the criteria, i.e. the filter for "Company Name" is handled in the query criteria as
Code: Like "*" & [Forms]![HooversProspects]![SearchText] & "*"
When i exit this form in my un-compiled version it does not pop up an "Enter Parameter" box, however, when i exit this form from the compiled version it pop ups the "Enter Parameter" box for every filter I have.
How i can fix this? Perhaps change the rowsource on the query to null upon exit?
I work for a foundry and we bring in lots of raw material for conversion to alloy. Each incoming lot is assigned a number on arrival and is then broken down and processed in batches, typically 9. Each of these batches is then assigned a number as well, again a consecutive number which also includes a letter (the letter designates the product). Process data for each batch is kept and final QC analysis data is also recorded.
My question is: how do I set up a form on which I input the lot number, customer, and source once but that fills in that info for each row in the table with which the form is associated? After conversion, I would like to be able to analyze the process data by one of those 3 values so I need them filled in in the table (I plan to pull the data from the Access table into Minitab for statistical analysis).
I have attached a (slimmed down) Access 2007 database used for Asset Management and fault reporting. It opens on the main form which has a number of subforms and one sub-subform.
To make the form as user friendly as possible I am placing a number of unbound text boxes on the FormHeader to be used for search queries. The AfterUpdate event for each text box executes the necessary query, searching on the contents of the text box.
This works absolutely fine for the 'Colloquial Name' text box and associated field - this field is in the main table, RTI_Assets. The main form frmRTI_Assets is bound to this table. The query executed is called 'Colloquial Search'.
I cannot however get the 'Fault Reference' search to work on the field Supplier_Reference in the RTI_Fault table (the subform subfrmRTI_Fault is bound to this table). The query executed is called 'Fault Reference Search'.
There are 15 records in the assets table and 2 records in the faults table - with supplier references 555 and 101010.
I get prompted with Enter Parameter Value for the field RTI_Fault.Supplier_Reference if I enter 555 in the text box. Whatever I enter in this prompt I get returned to the first record.
I have a new scenario today! I have searched database design to try to figure this out and have an effective database as well as adding multiple records to one table that is linked to 1 record in the other table.I have a master student list with their information that has the fields
Student ID LastName FirstName Address City Zip Community
I have another table that has the fields
ClassName Date Community Instructor
What I would like to do is be able to create a form that can add multiple classes for each student. For example, I have Student 1. Student 1 has attended class A, B, C, and D. I would like the form to have the student's name and ID with a way to add multiple classes linked to that student.
