Forms :: Exit From Operation
Jun 2, 2013
I am trying to use to update the field in a record, What I am trying to achieve, is once I press/click the update button, cursor needs to move to next desire field which is "txteditcid", but after pressing the update button, I am getting following error (however, field is updating in table)
Run-time error '2110':
Microsoft Access can't move the focus to the control txteditcid
Code:
Private Sub Butupdatecustemail_Click()
Dim dbs As DAO.Database, update1 As String, rcount As Integer
Set dbs = CurrentDb
update1 = "UPDATE CustomerProfile set custemail='" & Me.txteditcustemail & "'" & "WHERE cid='" & Me.txteditcid & "'"
[code]...
View Replies
ADVERTISEMENT
Feb 3, 2014
I have a form with text boxes bound to a table. There are two fields, ProposedSalary and ProposedIncreasePercent, that should not be populated at the same time. It's either one or the other. I've tried to add a validation to the percent field to check if the salary field is empty or has value. That did not work for me and I removed the validation. Ever since, if I try to input a percent value into percent field, it changes to zero on exit. I think i might have tried to add that same validation to the form itself but i checked all the properties and I don't see anything. I've looked at the VBA code view and did not see ProposedIncreasePercent referenced anywhere. I created the document for the form through the document analyzer and searched for that field and couldn't find it. So, I can't find anything coded anywhere to change that field to zero but yet it does. I've also tried to remove the field and add it again and it does the same thing.
View 2 Replies
View Related
Jan 10, 2012
Below is the code for exiting without saving. It works perfectly fine. I just want to know if I can change the MSGBOX message to something like "Are you sure you want to exit without saving?" instead of its default message - "Are you sure you want to delete this record? and also, right now, if I click NO when I am asked if I want to delete this record, it exit the form rather than staying in the same form. But how do I make it to STAY in the same form if I click NO.
Code:
Private Sub Command24_Click()
On Error GoTo Command24_Click_Err
On Error Resume Next
DoCmd.RunCommand acCmdUndo
[code]....
View 14 Replies
View Related
Mar 25, 2014
Code:
Private Sub Command124_Click()
On Error GoTo Err_Command124_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "PRINTSQUARE 1"
DoCmd.OpenForm stDocName, 3, , , , 4
Exit_Command124_Click:
Exit Sub
Err_Command124_Click:
MsgBox Err.Description
Resume Exit_Command124_Click
End Sub
An command button would open a form to display some query result, and how could I do something after user exit that form!! I have tried to put some action afater the Docmd and EXIT_COMMAND124_CLICK:, both didn't work!!
View 3 Replies
View Related
May 20, 2015
I have a fully functioning login screen with a combo box for name and a password box. It also has an option to create a new user or exit the database. On my main form I want the employees to have to log out of the database as opposed to close it out. How would I go about this? Also I need tracking login and logout times for each employee.
View 3 Replies
View Related
Jun 6, 2005
Does anyone know the code to exit from THE whole ACCESS program.
That is when I click the close button on the switchoboard, I want the system to close the whole of access program.
View 3 Replies
View Related
Nov 14, 2006
If my user uses the MS Access 'X' button (upper right hand of screen) to Exit the application does anyone know what methods are triggered that may let me perform some task before the application actually ends?
Thanks
View 1 Replies
View Related
Apr 21, 2006
I am running a report from a form that is to produce an excel output:
Private Sub cmdTransferToExcel_Click()
On Error GoTo Err_CmdTransferToExcel_Click
Refresh
DoCmd.Hourglass True
DoCmd.OutputTo acOutputQuery, "Temps_Margin_Output", acFormatXLS, [Forms]![Revenue_Output]![output], False
Exit_CmdTransferToExcel_Click:
DoCmd.Hourglass False
MsgBox "File Created", vbOKOnly
Exit Sub
Err_CmdTransferToExcel_Click:
MsgBox Err.Description
Resume Exit_CmdTransferToExcel_Click
End Sub
but receive an error "Invalid Operation"
Can anyone suggest anything?
Thanks
View 1 Replies
View Related
Mar 12, 2007
hello,
I have a table with "fieldA", "filedB", and "filedC". I want "fieldC" to be the result of multiplying "fieldA" and "filedB". How can I do this?? I don't want to have to type in the result in "fieldC", I want this to be done automatically when I fill up "fieldA" and "filedB."
thank you very much
View 5 Replies
View Related
Oct 12, 2007
I have a calculated query field that says this:
1 wk Wins: IIf(([1 week price]-[PRICE])/[PRICE]*100>=[s],1,0)
It prompt me for the variable [s] when I run it, as it should.
However, the results for whatever I type for [s] are not the same as the results if I just put the number in the query instead, ie:
1 wk Wins: IIf(([1 week price]-[PRICE])/[PRICE]*100>=5,1,0)
The above should return the same results as if I input 5 for the parameter prompt for [s], but they do not, and I cannot for the life of tell what Access is actually doing with the number I input for [s]. I cannot see a trend in its results from record to record, it just seems random.
Any thoughts on this appreciated.
thanks,
andrew
View 3 Replies
View Related
Jun 27, 2005
I've created a new database using the standard Switchboard function. However, when I use the Exit Application command the database closes but MS Access stays open. It's a minor problem but infuriating, especially as I've never encountered this problem before and everything I try won't fix it. Any ideas?
View 5 Replies
View Related
Aug 21, 2005
I'm having an application which is developed in access. It's running quite well, some times when I made changes to forms or reports it hangs for a while and exits without saving, it happens sometimes not always... what could be the problem? how can I rectify this..
View 3 Replies
View Related
Oct 13, 2005
Hiya,
I have a database which on exit runs calls the following module and backs up the database to anther folder
Public Function BackupCopy()
'This function will allow you to copy a db that is open,
'You must set a reference to the 'Microsoft Scripting Runtime' for the CopyFile piece to work!
Dim fso As FileSystemObject
Dim sSourcePath As String
Dim sSourceFile As String
Dim sBackupPath As String
Dim sBackupFile As String
sSourcePath = "C:Database"
sSourceFile = "MyDB.mdb"
sBackupPath = "C:DatabaseBackups"
sBackupFile = "BackupDB_" & Format(Date, "mmddyyyy") & "_" & Format(Time, "hhmmss") & ".mdb"
Set fso = New FileSystemObject
fso.CopyFile sSourcePath & sSourceFile, sBackupPath & sBackupFile, True
Set fso = Nothing
Beep
MsgBox "Backup was successful and saved @ " & Chr(13) & Chr(13) & sBackupPath & Chr(13) & Chr(13) & "The backup file name is " & Chr(13) & Chr(13) & sBackupFile, vbInformation, "Backup Completed"
End Function
but after backing up correctly it brings me the following error
"Run-time errror '424':
Object required
any ideas what might be going wrong
Cheers
View 1 Replies
View Related
Feb 16, 2007
Hi all,
How would i close access via vba after a function runs?
I know how to close a form, but id like to close the entire thing.
Thanks in advance
View 2 Replies
View Related
Jun 15, 2005
I have a form that automatically is shown when a user enters the database. I want to disable all exits of this form so that the user cannot exit the form before he/she exits the whole database. How do I do this?
View 2 Replies
View Related
Dec 1, 2006
I have a form with 4 tab pages. on the 2 tab page I have a subform that adds records to a table via 2 combo boxes.
I have been able to stop user from leaving a combo control blank or skipping to the next combo control, but if user clicks the Exit command button on the main form, from the 2nd combo control, it prompts that value has to be selected but the gives error:
"You cannot add or change record because a related record is required"
How can I stop this so form will close and undo the 1st combo selection and not give error?
View 1 Replies
View Related
Jul 30, 2014
What are the pro's and con's and setting the database to compress on Exit?
View 5 Replies
View Related
Aug 13, 2006
I have developed a MS-Access application for a small call-center (20 users).with approx 1500 customer-records to call everyday.
What I have done:
There are 20 front-ends residing at the Telecallers desktop and 1 database@server. Presently I am allocating 1500 records (clients send 1500 data everyday) everyday to 20 telecallers so that they get their respective calling details (75 records/telecaller). The no of cases that they need to call is predetermined.
They see cust-details and call up the customer manually.
What I intend to do:
I don’t want to allocate records to telecallers. Instead, when they open the FE-screen they will get the record that is available. (Of course keeping in mind that no particular record is opened by more than 1 telecaller).
Any help in this regard is highly appreciated. Any idea will encourage me to make the application more pro.
View 3 Replies
View Related
Dec 21, 2006
Say I have a table full of tasks. Some tasks are performed each day (Mon-Fri, Friday only, Saturday only, etc). Each day someone has to mark which tasks were not completed, and move those to another table (?). Each task may have small changes to it (length of time, who performs the task, etc.).
There is one person tracking these 350 tasks per day, which they run a report generated from another server that tells them what wasn't completed.
I would like form to be able to show what was completed for the day (by basically subtracting what wasn't completed), as well as for a range of days.
Most of this I can do, but the basic problem is how to generate a "daily" schedule, or a list that he can select what wasn't done? I thought about make a table of days from now until about 2010, and make a query with no relationship so that it assigns a date to each entry (which creates several hundred thousand lines), but that wouldn't do because there can be change that occur for that task for one day or several months.
How does one handle reoccurring events like this? I've gotten fairly good with Access over the past several months, and 90% of what I want to do is no problem, but this one problem, with scheduling, is something I've never been able to figure out. I really need this for 3 separate projects!
The closest I've come is using an append query that pulls a date from a control on a form with a button press, and adds to a list of tasks, but I feel there should be a more elegant (and foolproof) option.
View 2 Replies
View Related
Mar 7, 2006
Hello,
I was hoping someone on this forum might be able to help me.
I am trying to update a table with info in another table, using a nested query.
strSQL = "UPDATE tblTemp SET AdminNum = '" & cboAdmin.Text & "', " & _
"Size = (SELECT Size FROM tblEquipList WHERE AdminNum = '" & cboAdmin.Text & "')"
DoCmd.RunSQL strSQL
cboAdmin is a combo box on my form that is populated by tblEquipList.AdminNum.
When run this gives me:
Runtime Error '3073':
Operation must use an updateable query.
The SELECT statement works by itself, and the first part of the UPDATE (without the nested select) works by itself, but not when I combine them. I also need to update other things in the same manner in which Size is being updated, but when I can get this to work it shouldn't be a problem just added the updates for the other fields in there.
Thanks in advance,
Jeremiah
Edit:
Also, I figured I should add that when I remove the SELECT statment and put in a number (IE: Size = '400'), the query runs just fine. So I know the problem lies in the nesting, but am unsure how.
View 7 Replies
View Related
Aug 25, 2006
Hi, I've been progamming Access for a couple of years so am not a complete novice but I can't seem to work out this problem.
I downloaded some code from "databasedev.co.uk" from the query section called "Using a Microsoft Access listbox to pass criteria to a query". It works fine. However when I import my own table and change the code to SELECT the imported table and change the WHERE statement to my new string within that table , I get an error. When I select from the list box and click the command button I get the message "You canceled the previous operation".
However if I select the "ALL" selection from the list box it does return all the records.
Any help would be gratefully received!
JeffT
View 1 Replies
View Related
Jan 16, 2007
this is vexing me.
I have 4 tables, 2 entities, 1 relationship and 1 lookup
Entities are tblOrg and tblForm
Relationship is tblVentureParticipation
Lookup is tblInfo (Has many different lookups)
When an organization (these are listed in tblOrg) turns in a form, a new record is inserted into tblForm with the ID of that organization and the ID of the form
I want to identify the forms that have NOT been turned in.
So I figured
Step 1:
Identify all organizations who are participating (WHERE tblOrg.OrgID = tblVentureParticipation.OrgID)
Step 2:
Join all of the previously selected organizations with all of the forms (FROM tblOrg, tblInfo WHERE tblInfo.LookupID LIKE 'F##')
Step 3:
Remove all of the entries in tblForm that match the result of Step 2.
I have verified that both of these individual queries return the right information ...
View 1 Replies
View Related
Mar 27, 2007
I am asked to display this, "List the Client Numbers, Name, and Balance fields in the design grid. Sort the records in desending order by the Balance Field."
AND THIS: "Display the top 25%"
I need to know how to show the top "25%" when I press run, in the datasheet without manually having to arrange them.
I would love detailed instructions ASAP!
View 3 Replies
View Related
Sep 17, 2007
Hey all... I have three searchable fields in my query ATM if i search the MO, and the job code by themselves they don't error out. But if i try searching the FName field. It says "You have canceled the previous operation? Can someone help me with this
View 1 Replies
View Related
Feb 25, 2008
Hello All,
I have a call center and Im trying to work out a call que.
I have 8 operators.
10000 records that need to be called.
I'm trying to create a query that will select the first record avilable from my table. when the next operator has completed his call do the same thing and so on without duplication of efforts.
Any help would be appreciated
Rich1968
View 4 Replies
View Related
Feb 24, 2006
anyone know of a reason for this error: "The save operation failed"? I attempted to edit some code and tried to save but got this error. Also been getting some out of memory errors. Not sure why though. Thanks
View 1 Replies
View Related