Forms :: Expression On Click - Event Property Setting Produces Error
Nov 24, 2014
Code:
The expression On Click you entered as the event property setting produced the following error: Procedure declaration does not match description of event or procedure having the same name
Now this is the error message that I am constantly getting from any command button I hit on a certain form. Here is the code of the form.
Option Compare Database
Option Explicit
Public inputCSV As String, ORG As String
I changed the names of the buttons, reconstructed the code under those names, went to the modules and changed names, made sure that a sub o function name is not duplicated in the project... But helas the error is still there. It used to work and suddenly does not work.
I have a report, on a control tab, on a main form.
On the form are two buttons: one to show all items, and one to filter them based on a boolean field called showitem.
The buttons work with the code below.
What I want to do but cannot seem to figure out is to have the report default to no filter.
The bound query has no criteria.
I'm trying to set the filter property via the on open or on load event and even if I isolate the report, cannot seem to reach it.
Code: Private Sub b_hide_items_Click() Me.Profile_Timeline_wNotes_subreport.Report.Filter = "timeline.showItem <> 1" Me.Profile_Timeline_wNotes_subreport.Report.FilterOn = True Me.Profile_Timeline_wNotes_subreport.Requery End Sub
Private Sub b_show_all_Click() Me.Profile_Timeline_wNotes_subreport.Report.Filter = "timeline.showItem = 0" Me.Profile_Timeline_wNotes_subreport.Report.FilterOn = False Me.Profile_Timeline_wNotes_subreport.Requery End Sub
I tried to dynamically set image OnClick property to function with couple of attributes. Everything works well, but... it launches the function automatically without any mouse click! What is causing this? I want to execute the function only on the result of mouse click.
I have three forms that are related to each other. When i click on a button on the second form I get this error: an expression that has an invalid reference to the property form/report. But why do I get this error??
At the third form I have two sub forms.This code are in the first sub form: Segment_subform. Sub Form_Current()
Dim ParentDocName As String
On Error Resume Next ParentDocName = Me.Parent.Name
If Err <> 0 Then GoTo Form_Current_Exit Else On Error GoTo Form_Current_Err Me.Parent![Blokk_Subform].Form.Requery End If
I think it's something wrong with Me.Parent![Blokk_Subform].Form.Requery. It doesn't recognize blokk_Subform.
I created 1 query from all 3 tables, then created the form from that 1 query.Now when I enter data into the form and click to save it , it produces this error message:The Microsoft Database Engine cannot find a record in the tblGas with key matching fields 'tblMain_GasID.The tblGas does contain a field GasID, but does it mean that the field should be tblMain_GasID
I currently have a combo list on a purchase order form that has the following event procedure(s) in it so as to open the inventory window as needed to add/edit inventory.
Not in List: Private Sub Combo55_NotInList(NewData As String, Response As Integer) MsgBox "ERROR: ITEM not in list. Double-click this field to add an entry to the list." Response = acDataErrContinue End Sub
On Double-Click: Private Sub Combo55_DblClick(Cancel As Integer) On Error GoTo Err_Combo55_DblClick Dim lngCombo55 As Long
If IsNull(Me![Combo55]) Then Me![Combo55].Text = "" Else lngCombo55 = Me![Combo55] Me![Combo55] = Null End If DoCmd.OpenForm "INVENTORYITEMSform", , , , , acDialog, "GotoNew" Me![Combo55].Requery If lngCombo55 <> 0 Then Me![Combo55] = lngCombo55
This works GREAT on other forms I have however, on this particular form it gives me the following error:
ERROR: You have tried to assign the null value to a variable that is not a variable data type.
I have started from scratch several times....can anyone help? Is there anyway to add a button to the form to open the inventory form and then requery the combo box when closing the inventory form?
Created a form that requires daily work flow info to be entered. Tested the form accepting random typos like "%, # ! etc... Worked just fine. In production received the following long error:"The expression On Click you entered as the event property setting produced the following error: Expression may not result in the name of macro, user defined function or event procedure".
when the Form Property "selectionchange" kicks in?I am trying to use this to run an event procedure. I have a sub form datasheet which contains a date, and when the selection is changed from one record to another in the sub form, I would like to run an event procedure that updates certain fields on the main form, according to the date.I have put msgbox in the event procedure, but it doesn't trigger when the selection is changed? or am I misunderstanding the property?I have also tried got focus, lostfocus, beforeupdate, but they only trigger when the record is changed, not just when the selection is changed.
I have a project at hand and it's been a predecessor of mine and client has asked me to do some work on it and extend functionality - but I have not really delved into Access before and I have had to worked my way through to this final snag :/
The Main Form has one sub form. This sub form allows the user to add multiple order items i.e. qty, stock, description from records within the system - fairly straight forward.At the last column of each row is the sub total of those particular items i.e.
Qty Unit | Item ID | Total ----------------------- 2 | 1234 | 80.00 ------------------------ 1 | 43526 | 20.00 ------------------------ > | |
So the total is a function of =[Qty Unit] * [Unit Price].Then in the Footer of this SubForm is the Sub Total
=SUM([Qty Unit] * [Unit Price])
All fine and well..... However, the additional functionality kicks in.
Lets add the additional customer_id from the Main Form. Each Item bought is dependent on the customer_id i.e. they get special prices depending on who they are.So a New table is made which has the Item ID and SpecialPriceID (of a table to define as a specialPrice) and the Price linked to this Item and Special Price category. So say that there are two groups of users "wholesale" and "nonwholesale" these would be SP_1 and SP_2 and each client is defined either one of these, and each stock item has a Price for each SP_1 and SP_2. Hopefully I've explained myself there.
Back to the SubForm. So now the Total needs to calculated differently with needed the external customer_id from the Main Form.
Code:
Function CalculateSpecialPrice(ItemID As String, CustomerID As String, Unit As Integer) Dim SPSelect As String SPSelect = "SELECT Price FROM [Items_SpecialPrices] WHERE" SPSelect = SPSelect & " ItemID = '" & ItemID SPSelect = SPSelect & "' AND SpecialPriceID = (SELECT SpecialPriceID FROM Customers WHERE customer_id = " & CustomerID & ") "
[code]....
its the sub total I just keep on getting #Error on. I have even watched (using alerts) that the correct return variable is the same as the individual rows. This is the equation I used for the SubTotal within the footer.
I have a form with a combo box that is populated by (1) a union query, and (2) a make table query from that union query. The reason I have both is because I want to have an autonumber and I can't do that directly in the first query.
So any time I update any of the tables that are in the union query, then go back to the form, i want the the combo box to update the list which means I have to run (1) and then (2) to repopulate the combo box with the updates.
In ContactIDForm it contain 1 textbox name 'TextBox' with Button Name 'Btn'
In ContactIDForm there is only 1 Text Box ContactIDTextBox and 1 Button. User Enters ID in TextBox and On Button Click Event it should check data from TextBox in Table name (ContactDetailTable) in field ContactID and if there is record matching, ContactInfoForm should Open else NewContactForm should open with ContactIDTextBox value in it.
I have a date control and on the Click event I run the following code. Trouble is the Date Control stops working, ie you can't change the date after one click ?
CODE.
Private Sub Calendar7_Click() weekofyeartxt.Value = DatePart("ww", Calendar7.Value) End Sub
I am having a problem in my access database. I have a a form called Compliance Register. When this window opens it lists all of the requirements of a particular department. There is an ID and Source ID(this field can contain the same number such as multiple 17's). The descriptions match up to what is supposed to be shown. However when I double click on the item, it brings up a Compliance Status window. This is where things go wrong.
It shows the status listed as the first Source ID that matches the number, but does not seem to also be matching up the ID as well It must match both ID and Source ID since Source ID can have the same number multiple times down the list..
Here is what is under the Event Procedure for the double click.
Private Sub ListRequirements_DblClick(Cancel As Integer) On Error GoTo Err_ListRequirements_DblClick Dim stDocName As String Dim stLinkCriteria As String stDocName = "Compliance Status"
[Code] ......
Under stlink criteria, i need it to not only pull the ID, but it has to have a "AND" Source ID. I need it to pull the record that matches BOTH numbers.
I have a continuous form with a button 'Cmd1' & a textbox 'txtMail' which is set to visible no.
When the user clicks Cmd1 - then txtMail becomes visible.
I can do it using vba on the buttons click event but when it executes txtMail for all the records become visible.
How do I use a button's click event on the form's current record - Private Sub Form_Current() so that when the user clicks Cmd1 on the current record only txtMail for that record becomes visible.
I want to add an event on Form Header when double click it will filter the values, which i did with macro, but could it happen on second time double clicking it it refreshes whole as original?
I have created a form to select multiple records for a transmittal report. I added a button to the form which I would like to open the report to view the current record. In the On Click event I added the following code:
Private Sub cmdPrint_Click() Dim strWhere As String If Me.Dirty Then 'Save any edits. Me.Dirty = False End If If Me.NewRecord Then 'Check there is a record to print MsgBox "Select a record to print" Else strWhere = "[TransmittalID] = """ & Me.[TBLTransmittal.TransmittalID] & """" DoCmd.OpenReport "RPTDwgTransmittal", acViewPreview, , strWhere End If End Sub
The debugger keeps highlighting the row above shown in red. I've used this same code before on other forms and it worked but not sure why it isn't working this time. The only difference with this form and previous ones is that this form contains a multiple values combo checkbox (hope that's the correct term). The query that the report is based on changed the names of the field names so that TransmittalID on the form is TBLTransmittal.TransmittalID in the query.
I've tried the code with and without the extended name but each time the "Do.Cmd..." is highlighted.
I have an Access 2010 form within my database in which I have a series of 8 tabs on a tab control. I am the only user who will have access to these tabs. I want to require a password in order to permit access to the tabs. The very first tab on the tab control works as a cover tab. There is no relevant information for anyone to view...only a graphic.
How to code the "on change" event of the tab control.
I'd like a confirm dialog to appear on button click, so when the user clicks 'yes', the on click event should continue and when the user click 'no', the event should stop.
I would like to select a record on an already open form called "form_candidates" using a search facility but can't get it to work.
In "form_candidates" the data settings are set to "yes" (filters/edits/deletions/additions) and data entry is set to "no". On opening, the form is set to go to a new record.
In this form I have a button that opens a record search form so both forms are now open. I enter the first few letters of the surname into a text box, press a button and the listbox is populated.
In the doubleclick event of the list box I have the following code:
Dim CandID As Integer CandID = Me.List4.Column(0) DoCmd.OpenForm "form_candidates", acNormal, , "forms![form_candidates]![Cand_ID]=" & CandID
So I double click on the record, the candidate form is being filtered but the record isn't being shown.
I am using a continuous form and would like my users to be able to change a field background color to a light red by double-clicking. The user would also be able to change it back to white by double-clicking again.
The code I am using (below) changes the field background color for all records. I need my code to only change the field color of the current record and cannot seem to find how to do that. The field name is [System_CurrentStatus].
Private Sub System_CurrentStatus_DblClick(Cancel As Integer) If Me.System_CurrentStatus.Backcolor = vbWhite Then Me.System_CurrentStatus.Backcolor = RGB(234, 154, 160) ElseIf Me.System_CurrentStatus.Backcolor = RGB(234, 154, 160) Then Me.System_CurrentStatus.Backcolor = vbwhite End If End Sub
I have a query that add up the numeric values in a value list assinged in a combo box in response to each question, the row source for question 15 for exmaple is as follows:
ROW SOURCE: 0;"I have no idea";5;"I indicated that I wouldn’t have time today";0;"Was mentioned early on and then not offered again";5;"The salesperson said the vehicle wasn’t available"
I then run a query that adds together the responses to 3 questions, including question 15, the field in the query appearing as follows:
LS5: ([q14]+[q15]+[q16])
It was working fine but has stopped working, the fault lies with q15, if I take it out it works again. So I looked at the table as I am sure it must be the way it is set up, why it worked before I don't know and I attach a screen shot of how the field is set up in the table, which is no different to q14 and q16.
Anyone got any ideas?
One last thing is that it makes no difference if the fileds contain a number (including zero) or are blank
I want to add a column to an existing table using the sql statement Alter table. The new column needs to be a yes/no type. The following code almost works but it only sets the column to a general logical type not specifically the yes/no check box .
I have a subform (subform1) which allows me to select a value which then dictates which record is shown in the other subform (subform2). I want to run a macro every time subform2 has a different value -- without me having to click anywhere in subform2. I have tried to attach the macro to every place I can think of and it just doesn't seem to run. I am thinking it is because subform2 isn't receiving the focus. How do I give subform2 the focus and which event property should I be trying for?
Ok, here is my question. I am just a little rusty since it has been a while since I have been in Access.
So I have a option group: option 1, option 2, option 3
If option 1 is selected I want textbox 1 visible, but textbox 2 and 3 not visible.
If option 2 is selected I want textbox 2 visible, but textbox 1 and 3 not visible.
If option 3 is selected I want textbox 3 visible, but textbox 1 and 2 not visible.
When the form first opens, all textboxes are not visible. What is the correct way to do this: code, macro, etc? and where should I place it? Should it be in the Afterupdate property of the option group?