Forms :: Field Focus In Modal Form
Dec 29, 2014How do you set the focus on the first field in a modal form when it opens?
View Replies
ADVERTISEMENT
Forms :: Move Focus From Last Field Of Subform To Another Field On Main Form
Aug 19, 2015I am currently stuck on set focus property. I have a main from with nested subform. I am trying to move the focus from last field of the subform to another field on the main form.
Customers(mfrm)....>Addresses(sfrm)...>Orders(sfrm Add)......>OrdDetails(sfrmOrders)
Now I have a field name [Securedesign] in frmOrderdetails and I want the tab order to navigate to field [CustomerID] in frmAddresses which is a subform to frmCustomers.
Forms :: Size Of Modal Popup Form
Aug 27, 2014I am having issues with a split form which modal and emergent (pop-up) properties are set to yes. When I open it, it is maximized or out of the size I had setup; although I saved it trying to "freeze" the height and width.
View 11 Replies View RelatedForms :: Set Focus - Sending Cursor To First Field
Dec 31, 2014I have a form (Home_Interview_Form) with several subforms (AirFresheners, Pesticides1 etc), and I would like the cursor to move from the last field in one subform to the first field in the next subform on keydown. I have written the following code, but instead of sending the cursor to the first field (PestSpray) it is going to the next field (PestSprayCom) in the subform for some reason. I am using Access 2013.
Private Sub Fresh2React_KeyDown(KeyCode As Integer, Shift As Integer)
Forms!Home_Interview_Form!Pesticides1.SetFocus
Forms!Home_Interview_Form!Pesticides1.Form!PestSpr ay.SetFocus
End Sub
Forms :: Forms Not Opening In Modal / Dialog Mode
Aug 7, 2014the forms are not opening in modal/dialog mode when they should be.The forms' pop-up and modal properties are set to "yes"..The code specifies to open Dialog so, for example:
Code:
DoCmd.OpenForm "frmCompanies", , , , , acDialog
Yet, the form opens behind the other form (which, incidentally, is also set to be pop up and modal in the form properties--is that the problem? If so, why wasn't this an issue until now?).
General :: Modal Form - Open Concrete Form And Pass Value To Control
Jun 21, 2013I have modal form - frmZlecenia
I would like to copy one control, then close this form, open concrete form and pass value to control.
My code is
Private Sub Menu_Click()
DoCmd.OpenForm "frmZleceniaMarzenaNawigacjaPD"
Forms!frmZleceniaMarzenaNawigacjaPD.Form!Imie = Me.Imie
Forms!frmZleceniaMarzenaNawigacjaPD.Form!Imie.SetFocus
DoCmd.Close acForm, Me.name
End Sub
The problem is, still opens the previous form, not form "frmZlecenia"
e.g If I open form x then from this form I open my modal form "frmZlecenia" and then I will click "menu" button - now form "x" is open :/, but should be "frmZleceniaMarzenaNawigacjaPD"
There is some way to open concrete form from modal form?
Forms :: Set Focus To Sub Form?
Sep 14, 2014On a main form I have 2 sub forms. On the main form I have a command button that asks how many guests in a booking and depending on the response populates the subform with Guest Names. However it will only do this if I click on the subform and then click the command button.
I want to include some code that sits behind the command button on the main form that will duplicate the otherwise manual selecting of the sub form. And I am thinking this is a SetFocus procedure.
I have tried this code;
[Forms]![Booking].[SubForm1].SetFocus
where Booking is the name of the form. I do not know whether the Subform is #1
OLE Object Won't Get Focus In Form/Memo Field Problems
Jul 26, 2006Hi all,
I have added an OLE WordPad object to a form. However, when I use the form, I cannot select/give the object focus to activate it. Even if I right click the object, it give me the correct popup menu. :confused:
I am using this object as I am having troubles with Memo fields. I use a form to update records, one field of which must be greater than 255 characters long. When I press my update button (it just runs some code to turn off warnings, run two simple update queries and the turn the warnings back on) the update process seems to complete. However, if I go to the table/refresh the form contents, only the first 512 characters are displayed and the last few are strange system characters.:confused: This occurs no matter what I do. I was tole that copy/paste operations can mess memo fields up, but I tested this by using a fresh field and typing everything in. Hence I am now trying the OLE object to get around this problem. :confused:
Any ideas peeps??
Cheers,
Matt
Forms :: Setting Focus To Control On Single Form Side Of Split Form
Jun 24, 2013When I right click a row on the data sheet side of a split form an select "New Record" I want the curser to go to the first field on the single record side. I've placed this in the OnCurrent but it did no good.
Code:
If Me.NewRecord Then
Me!Descrfiption.SetFocus.
End If
Any way to set the focus to the single form Side of a split form?
Forms :: Setting Form Focus Properly?
Jul 10, 2014I have a Main Form with a tab control. On each of the six tabs is a SubForm that takes up the entire tab. So basically I have a tabbed interface for my forms, just with a bit more control over the layout than if I just opened the forms separately in the Access window.
Anyway, on one of those subforms is a button. When you click it, it opens a separate form in a pop-up window, which is used to find a specific record. Once that record is found, you can click another button, and the idea is that this pop-up window closes, and you return to the underlying form, which jumps to the record you selected.
So far so good. Now, if I am working on my program in Access, and I open that subform's source form separately in its own tab, click the icon to open the record finding form, find a record, and then click the button to load that record, the following code runs, and it runs flawlessly - closing the pop-up window, and passing the information back to the main form which displays the proper record:
Quote:
Private Sub ViewRecord_Click()
Dim RecordID As Integer
RecordID = Me.ID
DoCmd.OpenForm "CDLExam", , , "ID = " & RecordID
DoCmd.Close acForm, "CDLExamCONT", acSaveNo
End Sub
Where my program falls apart is that, in actual use, this form is not open on its own. It's open as a subform on one tab of a tab control on a Main Form. So the third line of code falls apart. Access thinks I want to open CDLExam separately, but it can't because it's already open in the subform, so instead I just end up back at the main window like I want, but the form fails to move to the proper record. Basically, line 3 just doesn't do anything.
How can I make this work? I tried replacing "CDLExam" with the name of the main window, but then it tries to move to the record in the main window, which throws an error as the main window doesn't even have a record source attached to it.
how to refer to the SUBFORM which has CDLExam open, and tell THAT to move to the proper record.
Forms :: Button In Popup Form - Set Focus To Another Form?
Jan 28, 2015How can I make a button in a pop-up form to send enter key to a text box in another form? Do I need to set focus to the other form first? And how?
View 1 Replies View RelatedForms :: Data Entry Form - Set Focus On Tab Control
Sep 10, 2014On my data entry form I have a tab control with three pages
At the bottom of the first page I have a sub form with 3 fields
Currently, when tabbing, the focus runs through the fields as per the tab order
BUT
Once it gets to the subform (datasheet view) it jumps into the first field of the first record rather than the first 'empty cell' thereby starting a new record in the datasheet.
Once the three fields in the datasheet are completed the focus tabs back to the top of the first page of the form rather than onto the next page of the form
How to correctly reference controls using VBA so I could SetFocus where I want?
The Main form is called frm_Admissions
It has three pages called Patient, Treatment & Service Providers
Patient has a subform called sub_Cluster (which may or may not hold Cluster Information)
I would like the tab order to jump from the last textbox on the form into the first field of a new record in the datasheet (rather than the first field of any existing records)
Once it has finished in the datasheet I need to tab to the first field/textbox in the Treatment's page of the form rather than back to the first field/textbox in the Patient's page.
Forms :: Subform Takes Focus From Top Of Main Form?
Jun 29, 2014I have a form that I created that has a tab control. When the form loads, it automatically sets the focus to a field in the subform. This wouldn't be a problem, except when it does it hides the tabs at the top of the form so I have to go and scroll back up every time I click a tab so that I can see the tabs. Is there a way to adjust this? I have tried hiding a field and setting the focus to it and that didn't work. I also tried setting the focus to the actual tab, but that also did not work.
View 8 Replies View RelatedForms :: No Focus For Unbound TextBox In Continuous Form
Oct 27, 2014I have unbound TextBox in continuous form and I would like that it never get focus. In property I specified Enabled=No and Locked=Yes. But it doesn't work.
View 8 Replies View RelatedForms :: How To Capture SSN From First Form To Use As Focus For Second Form
Jul 22, 2013I have two forms that have a unique field (SSN).As I'm working in one form, I want to be able to pull up the other form (which isn't a problem). On the second form pulled up, I want the record to match the first form (SSN) - this is the problem.
I believe SetFocus is what I need to use but I don't know how to capture the SSN from the first form to use as the focus for the second form.
Modules & VBA :: View Main Modal Form Based On Chosen Subform Record
Jul 22, 2014I have a modal form which has a single record which is then linked to a sub-form on the same modal form. This all works fine and shows the relevant record and sub records but I want the modal form main record to change dependant on the record selected in the subform (which is basically order item history.
I found some code on another site which seemed to work for others but for me I am getting Run-time error 2465 and it doesn't like my reference to 'Me' - is this because it is a modal form?The code I am using is:
Public Function GotoRecord(RecordID As Long)
Dim rst As DAO.Recordset
Dim strCriteria As String
Set rst = Me.RecordsetClone
strCriteria = "ID = " & RecordID
rst.FindFirst strCriteria
If rst.NoMatch = False Then
Me.Bookmark = rst.Bookmark
[code]....
General :: Address Text Field / Focus Field
Sep 24, 2012-How can I address the fields on my forms? I just want to create a button that increases a value by one on click.I tried
FORMNAME.FIELDNAME = FORMNAME.FIELDNAME + 1
FIELDNAME = FIELDNAME + 1
FORMNAME!FIELDNAME = FORNAME!FIELDNAME + 1
but the button does nothing. And that is all I found by googling.
-How to focus a field at the beginning? I want to be able to start writing always in the same field.
FIELDNAME.SetFocus
does not work. I dont know if I made any mistake during creating tables and forms, but these codes should actually work, shouldnt they?
Set Focus To The First Field
Mar 7, 2006I moved the Address field from third postion to first position, so that clicking on a list box places the address from the List Box into the Address field. I adjusted the bound and source boxes and it works perfectly. The cursor now points to the Last Name field (second position, which it did originaly.) I would like the cursor to point to the Address field so as not to confuse the operator. How can this be accomplished? I am sure the correct Event code will do the tick.
View 2 Replies View RelatedStopping Field From Getting Focus
Sep 19, 2005I have 10 fields on a Form. When I load up my Form, I don't want any of them to have the cursor in it.
How do I do that?
On Got Focus Go The Beginning Of Field
May 15, 2006Lot of questions from me today but anybody know the vb for ongotfocus of a field for the cursor to go the beginning of a field
View 3 Replies View RelatedHow Do I Set To Popup And Modal?
Apr 25, 2005How do I set a form to popup and modal? What field in properties do I use the expression.popup?
View 2 Replies View RelatedField Focus And Making MDE Files
Mar 8, 2005When I insert this code:
Private Sub Phone_Click()
Me.Phone.SelStart = 0
End Sub
Access will no longer make an MDE file. I was trying to make it so when the Phone field was clicked in the focus would be at the beginning of the field.
If I remove these lines, an MDE is possible again. I have tried it at the beginning and at the end. Any thoughts?
Tables :: Field Formatting With Focus
Oct 12, 2012I have a SSN field and i want it to have the dashed (I got this part down.) But when I click on the field to copy an paste it I want the dashes to disappear. I am thinking What ever the code (if any) would on in the fields onFocus event. I don't want it to copy the dashes.
View 14 Replies View RelatedPrint Pop-up Modal Report
Jun 29, 2006I have a report that opens from a command button on a form. The settings on the report are set to pop-up and modal to keep the focus on the report until closed. I like the settings as they are but I need to print the report once it pops up. As the settings go, I cannot access or use the toolbars to print the report. How can I print the report from the pop-up, modal view? :mad:
Thank you in advance for all your help
Modal Popup Query
Jun 8, 2006Is it possible to make a query Pop-up? All of my forms are set so the Database background is hidden and they popup. I haven't been able to figure a way to do this with a query. Any help or suggestions would be great :)
View 6 Replies View RelatedI Need My Code To Wait... (modal?)
Mar 29, 2005Hi
I am importing a database, but I first need a couple of parameters from the user.
Now I write this mostly in Access VBA, since I come from programming background.
What I want to know is how can I let my code wait for the modal form to close before continueing?
Thanks
-Canderel
Sub ImportFoo()
'//Prepare files for import
docmd.OpenForm "frmImportParameters" '//(with modal, pop-up, etc.)
'//---- WAIT For form to close ---- THIS IS MY Question...
'//Import Code... This runs before I close (actually before the form opens about)
End Sub