i have one form filtered based on a field value, now i want to open another form which has only the same member ID but not the actual field on what the first form had been filtered (so i cannot just use the same filter) , so what i want to do is that the 2nd form should only show the members which are in the first form.
View RepliesI have a form which uses a parameter based query to present an individual senior doctor with a list of names for of individual juniors to provide an assessment report on. When the first form opens the user enters their RespondentID.
Once senior has decided which names to comment on I have another form which has the questions to be answered which is opened by clicking a button on the first form.
How can I pass a parameter from the first form to the second so that only the records relevant to that senior doctor are displayed? The underlying table has 60 senior doctors and 20 junior doctors. The senior doctor is identified by the field RespondentID in the first form. I've tried putting a WhereClause in the FormOpen command but I still get a dialogue box asking for the parameter RespondentID when the second form is opened.
I have a form (Suppliers) with a button that opens another form (Product List).
At the moment the form (Product List) is set as a pop-up form and when opened lists all products.
I want to filter the pop-up form to only display products for the current supplier displayed in the Supplier Form.
I have tried the following below without success - I have varied this but the filter does not apply ...
Private Sub Form_Load()
DoCmd.OpenForm "Product List", acNormal, , "SupplierID = " & SupplierID
End Sub
I have a button that opens a second form and filters that form based on a text box on the first form(which remains open). the problem is that it does not filter the second form unless the second form is already loaded for some reason.
For example if i click on the button it opens the form Unfiltered then i go back to the previous form without closing the first form, click the button again and it is then filtered .
I attached the screen shot of the macro for the button and there are no other events on the second form.
I have been building a database for use in a charity shop and am struggling with an issue regarding one of the forms.
I currently have a form which displays all expenses from the shop. I have added a combo box to the top of this form which allows users to filter records based on an expense ID Code. It all works fine but I would like to be able to add a start date and end date box to the form also so that records can be shown between two dates.
I have tried adding parameter boxes to the query which runs the form (which works) but the issue I am having is that when a new id is selected from the combo box the parameter boxes pop up again asking me for start date and end date again. This happens every time a new combo box id is selected.
I think the way resolve this issue may be to add a start date and end date box to the form but I don't know how to implement this.
Please see the attached files for images of what I currently have. The forum won't let me post images directly here until I have 10 posts so I have had to attach the files instead.:
Query running the form - Attachment 1
The Form itself - Attachment 2
Combo Box - Attachment 3
Bound Column on combo box - Attachment 4
Code in Combo Boxes after update event - Attachment 5
I have a form that is filter based on a combo box. I would like to add another filter for date. but the code I'm using for the first combo box doesn't work for date.
the code is:
Sub SetFilter()
Dim LSQL As String
LSQL = "select * from Preventive_Q_View"
LSQL = LSQL & " where Item_Name = '" & Combo206 & "'"
Form_Preventive_View.RecordSource = LSQL
End Sub
How do I modify this code to work with the date combo box? Also, is there a way to get both filters to work together, as in filter based on the first combo OR the second combo, OR both?
Access 2003
Trying to filter a form based on a field with wildcard. My form has a txtCustFilter control where a customer's name can be entered in part or whole. The Customer's name is in PCCustomerName
This code works but, I'd like to make it case insensitive
Dim strFilter As String
strFilter = "[PCCUSTOMERNAME] LIKE ""*" & Me.txtCustFilter & "*"""
Me.Filter = strFilter
Me.FilterOn = True
Basically I have a Customer Form, which I have a New party button on it,this button opens up the party form to a new party, what I would like it to do is open up a new party but make the new party for the customer I had selected in the previous form.I have tried the GoTo macro's but cannot seem to get it to work.
I am thinking on clicking the button it will need to get the Customer ID, and then open the party form, create new party, and paste in the Customer ID, which then updates the Name - Date - Address - Company Fields.
Hi.
I have an Order form that is based on an Order table. In this form there are also a number of text boxes (not bound to table) with calculations, and one final text box with a deadline based on these calculations.
Is it possible to filter this form based on the deadline? I can do this by making the form based on a query, but then again I'm not able to edit the information in the form.... Please anyone???
I need to open my form with a filter attached that is based on criteria already existing in the subform. I've tried putting the following code in the OnOpen event of my main form :
Code:Dim stDocName As StringDim stLinkCriteria As StringstDocName = "Campaign Form"stLinkCriteria = "[Campaign - Last Contact Status subform].Form![Communication Response] in ("2","4","10","11")"DoCmd.OpenForm stDocName, acNormal, , stLinkCriteria, acFormPropertySettings, acWindowNormal
Basically I want to open my main form (Campaign Form) and only show records where the "Communication Response" is 2,4,10 or 11(a variable on my subform "Campaign - Last Contact Status subform"). Which in itself is a problem because I can't seem to code all of these variables- it will only accept one.
When I run the above code I am getting asked to enter a parameter value for "Campaign - Last Contact Status". I'm not too sure where this is picking this up from or how to fix it. I've even tried to run this based on the underlying query of "Campaign - Last Contact Status subform" with the same results.
Can someone help me? All I want to do is open the form based on the criteria I specify which is contained in a field in the subform. It doesn't sound that hard but it seems to be getting the better of me!
When I'm applying a sort and filter in a form, Access is updating the Filter and Order By properties of the form, so that it is possible to re-use in conjunction with Filter on Load and Order By on Load properties. However, a consequence of this is that when the form is closed, it prompts the user whether they want to save the design of the form. I want to circumvent this as I don't want to re-use the sort and filter and I don't want to be prompted to save the design of the form.
Although I can circumvent this by closing the form using a method that doesn't prompt for saving, the additional complication here is that the form in question is in the Navigation subform of a Navigation Control. Hence when I click on a another Navigation button, it (not me) closes my current form and hence prompts me whether I want to save the design of the form (if I have been sorting and/or filtering). I can't see how to circumvent this and the prompting is resulting in unacceptable usability.
I have a Master form which includes tabs within the tab I have subforms. I am looking for a way to filter my master form based on data found within my sub form.
I have a check box within one of the sub-forms called "softwareInstall" if yes the box would be checked. I want to filter all customers within my main form with a check box in my main form to turn on and show all customer who has this box check within the subform SoftwareInstall=True.
I am using the Navigation form and I have a tab that has all the sales quotes for a particular salesperson. Because my salespeople like to work with paper I have created sub tabs which contain a report with the same information but filtered based as follows: this Month, this year, and Last year. This report needs to be printable based on the filtered information so I created a print button within the report however when clicked it prints the entire report not the filtered report.
The filter criteria is located in the navigation button, navigation where under the data properties. I have the on click event of the button set to open the report in print preview but I need to know how I filter the where in the macro to read the criteria from the active navigation button property?
So I have a search form that I created that has also a subform (a continous form, that has a query as its source) where my records are listed. I started on making a Between dates filter where i would be able to pick dates and get the results of records that are in that range.
I put two text boxes in which I set format to Short Date so that I get the button to select the date from a calendar for each text box. Then I made a button that is only for this and added a Clickon code so that it filters my subform over the recordsource of the form. The problem is is that i get an error and it doesn't filter.
Code:
Private Sub btnDatumUpis_Click()
Dim SQL As String
SQL = "SELECT qrySearchV.VID, qrySearchV.MarkVoz, qrySearchV.ModelVoz, " _
& "qrySearchV.TipMot, qrySearchV.Regist, qrySearchV.VlaVoz, " _
& "qrySearchV.KorVoz, qrySearchV.KatV, qrySearchV.DatumUVoz, " _
[Code] ....
I have placed a filter button on a form as a filter and written the following on-click event procedure:
DoCmd.SetWarnings False
DoCmd.RunCommand acCmdApplyFilterSort
Me.Filter = "ACCOUNT_DO_NOT_EMAIL = 'HS'"
Me.FilterOn = True
When I click the filter button I get a blank message box titled 'Microsoft Access" and an OK button, when closed the filter works perfectly.I have checked this procedure in other forms and it works without showing the blank message box.The only difference with this form is that its control source is a union query.
On a form I have a:
control called "FilterListBox"
list box called "lstCustomer"
option Box called "optCustomerType"
When the user selects an option in the option box, "FilterListBox" is updated to either "1", "2" or "1 or 2"..One of the fields in the query for "lstCustomer" is "CustomerType" and its criteria is set as follows:
[Forms]![frmPrintHowCustomersPaidInvoice]![FilterListBox]
if "FilterListBox" = 1 the query for "lstCustomer" returns the correct records
if "FilterListBox" = 2 the query for "lstCustomer" returns the correct records
But if "FilterListBox" = 1 or 2, no records are returned.
I have one table containing name of restaurant with its address etc. Then i created another table to list out the restaurant workers names and details. Just as an example,
Table:Restaurant
Restaurant name
Address line 1
Address line 2
Restaurant #
Website
Table:StaffContact
Staff Role
Name
speciality
email
phone
I have the main form that has all the restaurant details only. And i have another form containing the Staff information. Please note the two table have a relation and it works well.
Now to make it user friendly(basically easier for the lazy ones), I dragged the staff contact form on to my main form and displayed it as a datasheet(basically a sub form).
Now, my boss does not want users to add/delete on this sub form(datasheet). So,he wants me to create buttons to open new record of staff for each restaurant(new form)
My issue is with opening a new record to enter a new person to the staff list and give them a role as well in form view.The new form has
So i ran a Macro, with open form with Where condition
Code:
[Staffcontact]![Rest Name]=[Forms]![MainForm]![RestaurantName]
But, it does not work .
The user will be creating a new project that contains a bunch of releases. The releases have standard names which are stored in a table tbl_ReleaseNames It should be noted that the list of names is not static.
The user selects which of the releases pertains to their project and then based on their selections, new records would be created in tbl_RFP_Release and then a subsequent form would open where it would display each of these newly created releases where they could enter additional information. I thought of creating an unbound checkbox associated with each of the standard names, and then checking to see if the checkbox was checked and then creating the new records followed by opening up the new form.
When I have a form called "SiteForm" open and click a button "NewCalloutButton" I would like it to open up a form called "CalloutFormEntry"
I've done this using
Private Sub cmdOpenDetail_Click()
DoCmd.OpenForm "CalloutFormEntry", , , "CalloutID = " & Me!CalloutID
End Sub
However this brings up all the records linked to the calloutID
What I'm after is to open the CalloutFormEntry from the SiteForm in a dataentry kind of format but to carry over the current SiteID based on which site is open on the SiteForm. That way there's no user error logging callouts to incorrect sites.
I can understand with placing a filter on a form.I have a table that needs updating. I created a form based on the table, but would like to only see the records that need updating, instead of the entire table.
I have no SQL knowlegde. Is there some simple answer? I would like to filter on one field for the word "NO" ie seeing only the records which contain NO in that field.
I have a form that has two different option button frames and 1 text box that I would like my users to be able to use to search/filter for specific records. I chose a form because a table does not work as a user-friendly interface for the data that is being stored. The first option button frame allows the user to filter by Month and is named [FilterDate].The second option button frame allows the user to filter by incomplete and complete records and is named [FilterOption].
The text box is used as a search box and is named [txtsearch].I am able to successfully create macros to apply filters for each of the above options; however, each time one of the options is updated, it removes the previous filter. What I need is creating a macro (preferrably) or vba code (if macro is not possible) so that my users can first pick a month (as this will always be the first thing they do when opening the form), then pick complete or incomplete records within that month if desired. The search box then would only filter records that meet the first two criteria (month and complete/ incomplete).
Is it possible to capture a form's filter? In Access 2013, I have a form (from a template database) listing contact information. I can set filters by clicking on the column headers and selecting which records I want displayed. There is also a button to run a mail merge with Word. I want the merge to only include those records displayed on the form at the time it's run.
View 1 Replies View RelatedI have developed an accounting database which includes, among others, tables for Transactions and Creditors. I want to query the data for a particular time period to find out how much I have paid to each creditor. At the moment I can do this by having a Main Form based on Creditors, and a subform based on Transactions that contains a filter to display only those records that fit into the selected time period.
Now, there are some creditors to whom I have paid nothing during that particular period, so the subform shows no records. That's fine, but as I have several hundred creditors, it's tedious to pan through each creditor to see if I have paid anything.
What I want is for the subform to display records from ONLY those creditors to whom I have paid something. I can view these records with a select query by using the GROUP BY function. However it seems that a form's filter property will not accept a WHERE clause that includes a GROUP BY clause.
How I can program this in VBA, i.e. to mimic a select query's GROUP BY function for use as a form filter?
Been trying to use wildcards in fields while Filter By Form instanced in Access 2007.
LIKE, BETWEEN, IN or */% not available?
The form is based on a query. I am guessing this is why the drop downs only show IS NULL or IS NOT NULL as choices instead of the entire unique list existing in the underlying table/query.
I have a form with a bottom that has a macro that uses applyfilter to filter the current form based on what is within a textbox located on the form.
I used the macobuilder and have my where condition as
[num] Like "*" & [Forms]![frm_Main]![Text181] & "*" Or [name] Like "*" & [Forms]![frm_Main]![Text181] & "*"
This works when I open the form by itself but when I try adding the form to a navigation form I get prompted to put in "num" and "[Forms]![frm_Main]![Text181] " etc. when I click the bottom.
I want to open a filter form with mulitple conditions.one of them is a date condition.
I'm using access 2013 and the code below:
Code:
DoCmd.OpenForm "Edit_Mission", acNormal, , "[Report_Date]= " & Me.Date & " And [Supporter_Name]='" & Me.Supporter & "'"
it's opens the form but with no data. I also tried the # and it's still didn't work.