Forms :: Filter List Box From Other List Box Selections

Jul 15, 2015

I have a form with 2 list boxes, part number and modification. There is a subform containing another list box that is supposed to show the part information (bpn,vendor,status,etc.) that corresponds to the selected part number/modification in the parent form list boxes.

The part info list box has multiselect enabled and what i want to is be able to select multiple line items and press a button which then sets all of the selected line items status to "Request Removal". This is my code for the button:

Private Sub removeButton_Click()
Dim varItem As Variant
With Me.acbModList
For Each varItem In .ItemsSelected
MsgBox (Me.Status.Value & Me.[Part Number].Value)
Me.Status = 6
Next
End With
End Sub

The msgbox was for debugging purposes. Here's my issue; the for each actually does iterate through each selected item but the value for the line item doesn't change along with it. For example, when I selected 3 items, the msgbox will pop up 3 times but each time will have the same information (first item in the table) even when that item isn't selected.

My next issue is that I am receiving an error message with "Me.Status = 6" stating "You cant assign a value to this object". 6 refers to the id of the status i want to set it to.

View Replies


ADVERTISEMENT

Forms :: Query Does Not Show Selections From List Box

Jun 19, 2014

I have a list box (SUB CATEGORY) on my form where I can select multiple items. I have a query (Final) that has this field in it.

Problem - I cannot seem to get the list box selections to appear in the query results. What the "Criteria" should look like or maybe some code that I can try.

View 1 Replies View Related

Forms :: Limit Number Of Selections In Multiple Value List?

Apr 8, 2013

Is it possible (without using VB) to limit the number of selections a user can make in a multiple value list?

My list is one a form and when in the form field it brings up a total of 15 names with checkboxes, allowing you to "check" each name you want. However, I want to be able to have as many names as I need in the list, but limit the user to selecting only two of them.

View 3 Replies View Related

Use Multi-select List Box To Filter A Report With Two List Boxes

Nov 20, 2013

Allen Browne's "Use a multi-select list box to filter a report" solution, in particularly with two multi-select list boxes? The code works fine for me for either box so long as I code it for one box alone. Combining the two into one code results in a type mismatch error. I'm trying to use the code to pass the contents of both multi-select boxes as Where conditions to a report. Both boxes are based on number fields. To try to isolate the problem, I've removed Allen's setDescription and OpenArgs conditions. We're unfortunately still on Access 2003 as the company desires to squeeze every dime by using until end-of-life next year.

Code:
Private Sub cmdPreview_Click()
On Error GoTo Err_Handler
'Purpose: Open the report filtered to the items selected in the list box.
Dim varItem As Variant 'Selected items

[Code] .....

View 14 Replies View Related

Making Multiple Selections From A List Box (Please Help)

Nov 4, 2004

I had a bigger question earlier and it was answered but I am still having problems with a small part of it. I am trying to track the details of a meeting. who requested it, for what project, date, duration, who attended. I have everything figured out except accounting for who attended the meetings. attendees also called "analysts" have a manay to many relationship with the meetings. Because they can be a part of many meetings and a meeting can have many analysts. So I created a seperate table called MR-Analyst which was supposed to help me track which meetings each analyst attended. I don't know how the data entery form should look like, right now I have everything on it and linked correctly to track everything excep the analysts. how can I create a list box or something that I can select multiple analysts for each meeting and have that recored linked to the MR-Analyst table? Please Help!!!

View 5 Replies View Related

Modules & VBA :: Multiple Selections In List Box

Oct 29, 2013

I have a form called frmNotInvoicedSearch and on that form i have an list box called listCompanyClient populated with our client's names.I then have a command button called cmdOK that brings up a search results form called frmNotInvoicedSearchResults.

Currently i can select one of the records and when i click ok it brings up the search results for that selected record.Is there a way that i can hold in the ctrl and select multiple options and the search results report as such?

View 4 Replies View Related

General :: Multiple Selections In List Box

Dec 4, 2012

Basically I have a list box and I want to be able to pick several items from it (No relation except for the name in the Inital Assigned Field) then hit a button and then it opens another form and shows all the records selected. I want to this to see several records at once but also change the value of all the fields to the same value.

View 1 Replies View Related

Forms :: List Box To Filter Records

Jan 5, 2015

I have added a listbox inside my form that needs to filter records based on a field in the databases. For example if I have a record that has the field filled in with a text "reports", then it should only show those record that are on the second listbox. I have duplicated Outlook as an access database where I store all the old emails. The first listbox is called "FolderNames" where it shows all the folders names that are in the column called "FolderNames". The second Listbox is called "Subject" and shows all the subjects from the colun called "Subject".So when I select from the first listbox "Reports", then all the records that have the field filled in with "Reports" should show up in the second listbox.

View 14 Replies View Related

Forms :: Filter A List Box Using Combo Box

Jul 16, 2014

I have a list box and a combo box on a form based on a query. The list box is a multi-select, with column values of Client, ClientEmail, and Medical.

Medical is a simple yes/no field, and it is what I want the combo box to sort by. I have a Where clause in the query: WHERE (Medical=[forms]![frmOne]![cmbbx]), and the only values in the combo box are Yes and No (1 column). I also have the combo box set to run a requery macro after updating. I've also tried to change the macro to VBA:

Code:
DoCmd.Requery "lstbx"

When I pick a string from the combo box, the list box just goes blank, rather than updating to clients who either do or don't have Medical, and I can't understand why.

View 1 Replies View Related

Running A Query With Multiple Selections From A List Box

Jan 10, 2007

Hello Everyone,
I presently have a form with a list box, I want to be able to select Multiple Items in this list box and then have a query run against a Table based on the items I selected in the List Box. Can you tell me what to do in Query Builder to achieve this?

Thanks

View 1 Replies View Related

Queries :: One Record From Multiple Selections In List Box

Aug 8, 2013

Short Version:

I have a table where one of the fields is a list box, where it is possible to select more than one option. The options correspond to records in another table. I have a query that includes this list box field. The problem is that if someone has made two selections in the list box, the query creates two records, each featuring just one of selections from the list box. Can I get this query to hold the two selections in one record? This might be especially challenging because the query field is pulling attachments.

Long Version:

I have a table [Master List] (primary key is TagNumber), where one of the fields is a list box, [Standard Methods]. You can select multiple choices in this list box, which corresponds to a table also called [Standard Methods]. In the Standard Methods table, there are two fields for naming the method and attaching the PDF which describes the method.

I have a query called [Get Attachments] that is set to bring in different attachment fields from different tables, including [Standard Methods]. The problem is that the query creates a different record for each selection made in the list box. For instance, if you select two standard methods for a certain tag number in the list box, this query will have two records for that tag number, each with one of the method attachments. Is there a way so that the query just creates one record, with both attachments in that record???

It should also be noted that I am using Outer Joins, so that the query includes TagNumber records from the Master List even if there are no attachments for it.

View 1 Replies View Related

Forms :: Queries With Joins To Filter List Box

Feb 13, 2014

I have 2 forms which allow the user to first select a catergory. They can then select a sub category based on the selection made in the first box.

I have the form working 90% but can't get the list to filter based on the previous selections.

The code I'm using to generate the listbox rowsource is shown below;

"SELECT tblcatctry.CtryID, tblcatctry.Country, tblcatvtry.zoneID " & _
"FROM tblcontactsCountry RIGHT OUTER JOIN " & _
"tblcatctry ON " & _
"tblcontactsCountry.CtryID = tblcatctry.CtryID " & _
"WHERE (tblcontactsCountry.CompanyID IS NULL) OR " & _
"(tblcontactsCountry.CompanyID <> " & VarCompanyID & ") " & _
"GROUP BY tblcatctry.CtryID, tblcatctry.Country " & _
"ORDER BY tblcatctry.Country"

I want to be able to add in a join to the table tblcontactszone which has the selections previously made for the fields, ZoneID and CompanyID. How do I filter the above further?

View 14 Replies View Related

Save And Retrieve Multiple List-Box Selections In / From One Field

Feb 21, 2005

Hi,
I’m trying to develop a form for coding data from historiocal documents into a dataset. The form is used to avoid errors when converting ‚questions’ in the codebook to the codes for later statistical analysis.
Some questions allow for multiple anwers – but need to be stored to one field in the data-table, separated by semicolon. Ideally I would have a list-box with the questions and write the codes into one field after selection. Another difficulty is, that later the data need to be read from the table and the selections should be visible in the form (if the table contains „1;6“ items 1 and 6 in the listbox should be highlighted).

I’d be grateful for tips or links to relevant sources.
Thanks!

View 2 Replies View Related

Queries :: Populate Text Box Based On 2 List Box Selections

Feb 10, 2014

I have 2 tables.

tblOrderType

1 - Maintenance Order
2 - Breakdown Order
3 - Greasing Order

On my form I have two list boxes: An Order Type List box, and an Area Listbox.What query criteria or VBA code would I use so that I could populate a text box with the relevant order number based on the selections of the list boxes. i.e. MaintenanceOrder & Area Z would display MaintenanceOrderNoZ.

View 2 Replies View Related

Queries :: Copying List Box Selections Into Append Query

Dec 15, 2014

I've got a listbox on one of my forms (with multi select enabled). Essentially its a list of products, the idea is for the user to select as many products as he or she likes, then they click a button and the selected products show up in an append query, which will add records to a table.

How to copy the data from a list box to an append query (nothing that each selection should have its own row)...

i also wanna look into "Select All" and "Select None" buttons, is this possible?

View 4 Replies View Related

Multi-select List Box Selections For A Record And Re-selecting It?

Feb 1, 2013

So I have a multiselect listbox. The list that it shows depends on what is selected in a separate combo box.I want to be able to select multiple items from the listbox, and then be able to leave the record, and when I come back to it, to still have those items highlighted. Right now in my form, as I go through records, if I highlighted items 1,2 and 3 on a record, those first three lines will stay highlighted as I move through different records, rather than changing to what had been selected for each record.

I've already stored the actual selected values in a subtable. I just want to have it highlighted again so that you can see what was previously selected.

View 2 Replies View Related

Forms :: Apply Filter To List Box - Toggle Button

Dec 18, 2014

I have a form with data fields and a list box, data is coming from a query. When I add a toggle button to apply a filter to the data on the form, the data in the fields are filtered, but the list box still shows all the data items. How do I use a toggle button or something on the form that when activated it filters the data in the list box and the list box only shows the filtered content.

View 14 Replies View Related

Forms :: How To Filter A Multi-valued List Box Field

Nov 30, 2013

The main form has textbox & a Listbox with which I filtered a datasheet inside a sub form. Everything worked fine only the listbox [Discipline] is not working !! it cuase Run-time error: 3831. The multi-valued field "[Category]" cannot be used in a WHERE or HAVING clause.So how do I filter a multivalued Listbox field [Discipline] ?

Private Sub cmdSearch_Click()
'On erorr GoTo errr
Me.tblFLM_subform1.Form.RecordSource = "SELECT * FROM tblFLM " & BuildFilter
Me.tblFLM_subform1.Requery
Exit Sub
errr:
MsgBox Err.Description
End Sub

[code]....

View 3 Replies View Related

Forms :: Filter List Box Based On What Is Being Typed In Combobox

Jun 30, 2015

I have a database that is used to generate quotations. I have a form that I want to use to Re-Quote something. By Re-Quote, I mean I want the employee to be able to go in and search for the Part desired for Re-Quoting and create a new quotation with all of the information from that part and have the ability to change any of the information as needed. The Form is unbound, and has tab control with three tabs. I would like to search by three different categories "QuotationNumber", "Customer", Or "PartNumber". How do I have the combobox filter the list box below based on what is being typed in the combobox?

View 6 Replies View Related

Modules & VBA :: Multiple Selections In List Box - Query To Accept Parameters?

Mar 27, 2014

How to modify my query to accept parameters from a multiple choice list box. This is the SQL code behind my search query:

SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber,
AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto,
AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType, tblAirports.AirportName, InfoSource.SourceType, tblCountry.CountryName, tblAircraftCategory.AircraftCategory

[Code] ....

I have got an unbound multiple list box called List44 (Row Source: query based on table tblAircraftCategory, Multi Select - Extended) that needs to be passing parameters to my main query called AircraftSearch2. The multiple choice list box have the following fields:

1. Piston
2. Turbo Prop
3. Entry Level Jet
4. Light Jet
5. Super Light Jet
6. Midsize Jet
7. Super Midsize Jet
8. Heavy Jet
9. Ultra Long Range
10. Helicopter
11. Air Ambulance
12. Cargo
13. Vip Airliner
14. Airliner

The user will use the form for selecting search criteria (the form is called SearchForm2 and has 5 combo boxes, 3 text boxes and one multiple choice list box).

I'm very new to access and need to modify (or coding a separate module) my query to include my multiple choice list box in my query?

View 4 Replies View Related

Forms :: Multi-Select List Boxes To Filter Subform

Oct 6, 2014

I have 7 multi-select list boxes, which I want the user to be able to select multiple items and have it filter a subform by what is selected. The subform will not be visible.

Here is the code I tried for filtering my subform (which is throwing an error when I call it).

Private Function MasterSearch()
On Error GoTo Error_MasterSearch

Dim StrgSQL As String
Dim WhereClause As String
StrgSQL = "SELECT * FROM MasterTbl"

[Code] ...

The above code was to test just 1 of the 7 listboxes. When I call it on click for the command button, it throws an error about the "Call MasterSearch".

View 1 Replies View Related

Forms :: List Box - Selection - Populates Next List Box

May 20, 2013

I am wanting to preempt data in list boxes

listbox1
Fruit
Vegetable

listbox2 (If Fruit Is Selected)
Apple
Banana
Orange

listbox2 (If Vegetable Is Selected)
Potato
Peas
Carrot

If Fruit is selected in Listbox1 - Then Listbox2 should have the options
Apple
Banana
Orange

If Vegetable is selected in Listbox1 - Then Listbox2 should have the options
Potato
Peas
Carrot

View 12 Replies View Related

Forms :: Blank List Box Defaults To First Name On List

Feb 2, 2014

I have a Form that links to a List Box which pulls from a combined (concatenated?) list. The list it is pulling from appears as follows: SELECT [Rank]+" "+[Last Name]+", "+[First Name] AS Expr1 FROM [T_Personnel Information]; My issue is that the Field in the Form that pulls from the Field in the Table defaults to the first name on the list when left blank, where as I want it to default to a blank value unless I select a name from the list.

View 1 Replies View Related

Forms :: Filter Based On Multiple Selections - Referencing A Control On A Subform

Oct 23, 2013

I have a multi select list box which I am trying to use to open another form and apply a filter based on the user's multiple selections.

List box - lstCatergories
Main Form - frmSuppliersSummaryCategories
Subform on Main Form - frmSuppliersSummaryCategoriesSubForm

The Subform contains the text box CategoryID

Here's my code which nearly works...

Code:
Private Sub cmdFilterSuppliers_Click()
On Error GoTo Err_cmdFilterSuppliers_Click

Dim strWhere As String
Dim ctl As Control
Dim varItem As Variant

[Code] .....

My problem is that the control "CategoryID" is on the subform and I'm having massive problems trying to reference it. This is the part of my code that won't work:

Code:
DoCmd.OpenForm "frmSuppliersSummaryCategories", acNormal, , "CategoryID IN(" & strWhere & ")"

However; if I open the SubForm directly it works perfectly. I.e.

Code:
DoCmd.OpenForm "frmSuppliersSummaryCategoriesSubform", acFormDS, , "CategoryID IN(" & strWhere & ")"

To summarise... How do I reference the control "CategoryID" on the subform "frmSuppliersSummaryCategoriesSubform"?

View 4 Replies View Related

"Repopulating" Multiple Selections From A List Box

Jul 21, 2006

I have a form with a list box that allows multiple (extended) selections. When processing the selections, I save the data to an intersection table (B) which relates the keys of tables A and C:
A --> B <-- C

Does anyone know how to retrieve the data for the list box when the form is loaded so that I can display the list based on the data that had been previously selected?

If I can't come up with a solution to this problem I think will implement a subform that shows the current selections and refresh the list after processing the listbox selections. Messy, but it should work.

View 1 Replies View Related

Forms :: Filter List Box On Form By Using A Control On Form

Jan 14, 2015

On a form I have a:

control called "FilterListBox"
list box called "lstCustomer"
option Box called "optCustomerType"

When the user selects an option in the option box, "FilterListBox" is updated to either "1", "2" or "1 or 2"..One of the fields in the query for "lstCustomer" is "CustomerType" and its criteria is set as follows:

[Forms]![frmPrintHowCustomersPaidInvoice]![FilterListBox]

if "FilterListBox" = 1 the query for "lstCustomer" returns the correct records
if "FilterListBox" = 2 the query for "lstCustomer" returns the correct records

But if "FilterListBox" = 1 or 2, no records are returned.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved