I wish to filter the records in a listbox by using checkboxes.
The listbox (list1) and the checkboxes are in the same form (form1)
The listbox displays the records from a query (query1) related to a single table (table1).
Each record (assuming a list of videos) has a field called "Typology". The "video typologies" are: Movie, Documentary, Animation. So the table1 has a column called "Typology" which displays one of the three typology in simple text.
When entering a new record (in a specific form) user can choose the typology selecting an option in a combobox. The combobox is a "value list" one and I wrote the typologies in the "row origin" line:
"Movie";"Documentary";"Animation"
So we have a single column in simple text for all the typologies, but limited choiches.
So far everything is working well.
Now I wish to filter the records in the listbox by typology. Each typology should be related to a checkbox, so when I check a checkbox then the listbox returns only the records form a specific typology. Also, I wish to check more then one checkbox in order to display records from multiple typologies rather than one.
I've already made a button which resets the form, displaying once again all the records and eventually unchecking all the checkboxes.
About option buttons: I've managed filtering the listbox results using option buttons in a frame (option group?) and it works fine, but in this way I can choose only one typology at a time (and the typology field in the tabel1 of course is not simple text, but numeric: 1=Movie, 2=Documentary etc).
I thought this could be solved using the click event on each checkbox:
-If the checkbox "Movie" is checked then the listbox shows only the records which have the text "Movie" in the Typology field. Else, show all the records.
-If the checkbox "Documentary" is checked then the listbox shows only the records which have the text "Documentary" in the Typology field.
Etc......
I have a form where you can select four different options: Health, Dental, Vision, and COBRA, with a button to run a census. Right now, the button runs a DoCMD.OpenReport to open a report named "Census" where there are four text boxes, "Health Coverage Type" "Dental Coverage Type" "Vision Coverage Type" and "COBRA Coverage Type". I want the user to be able to select a checkbox, then filter the report to only enable the text boxes of the corresponding names.
So if someone selects Health & Dental, I want the report to run with the "Health Coverage Type" and "Dental Coverage Type" textboxes enabled/visible, but the other two to be blank.
Now I have coded what I think should work for my listboxes and it does not. When I click it does nothing. No processing of anything.
I have 11 multi-listboxes and want to collect what the user selects from each one and then use it to run my query. The query only uses 4 of the listbox items and then 4 other items that I have in the query. I want to be able to display this in the same form or perhaps a subform. Here is my code:
Code: Private Sub command8_click() ' Update the record source If BuildFilter = "" Then Me.frmQual_Sub.Form.RecordSource = "select * from qualq1 where " & BuildFilter End If
I am currently working on a form for my users to look at budget data. I have several listboxes for them to filter queries by. What I was wondering is, if it is possible to have data in one list box be filtered by the preceeding listbox?
For example: Three list boxes: Report_Period, Budget, Dept.
Each list contains all the values possible. This data is all in a filter table (and the listboxes created using SELECT DISTINCT queries to that table for the specific field). So, if I select Budget XYZ, could I filter the Dept listbox to only show the dept.'s associated with that budget? These are all multi-select listboxes by the way, so budget ABC and XYZ would only show the departments associated as well.
I have a report on this report there is a Destination City field and a Current City field, loaded from a table. I have a command button that loads a form to filter on the destination city, I have another command button that loads a form to filter on the current city location.
What I would like is, when I use the form to filter the destination city, then load the form to filter on current city, I want the listbox on the form for the current city to only list cities that are associated with that destination. Both form listboxes have the rowsource from the same table, just different fields. Is this possible?
i have a main form that displays medical patients information from my table GENERAL, and then from REFMD, DIAGNOSIS, ENCOUNTERS, and MEDICATIONS as subforms.
i have a smaller form named multiple that has checkboxes with the values State, Zipcode, Diagnosis, Medication, and RefMD.
when say state and zipcode are selected on this form and submitted, i need to prompt the user for those 2 values and then filter the main report with the relative query.
i can do it with just state and zipcode, but i cant figure out how to include the subforms in the query, like diagnosis or medication
I use the follwing code to filter a report based on the listbox selection on a form. Below is the code I use, the problem it will error if the results have an apostrophe in the string.
Private Sub FilterDesc_Click() Dim strWhere As String Dim ctl As Control Dim varItem As Variant 'make sure a selection has been made If Me.ListCarrier.ItemsSelected.Count = 0 Then MsgBox "Must select at least 1 Carrier"
I have a select query that has 10 columns which are checkboxes (yes/no) from the original table. I can apply filters for individual columns but I want the query to show records with ANY of the boxes checked and only omit those with NO boxes checked.
I have spent the whole atfernoon researching the forum but I can't find what I need. Help much apreciated.
I'm trying to hash two scripts I've found into 1 functioning filter, however I'm still relatively new to vba and can't figure out how to get this working.
I'm trying to use Allen Browne's Search Criteria:
with another snippete of code I found here:
Code: 'Purpose: This module illustrates how to create a search form, _ where the user can enter as many or few criteria as they wish, _ and results are shown one per line.
[Code]....
It's the date part I'm having trouble with, the rest of the search criteria work fine without the date, but I can't get it working when I try to modify and merge the date sections of each code.
Also I'm using a listbox for the "Yesterday";"Last 4 days";"Last 9 days" and not a combo box.
I have a table with training records. Each attendee is listed with date and the related document he was trained on. Now i want to make a listbox where the user can choose between the different dates of the trainings. Now when several people where trained on the same day, i get some dates back multiple times in my listbox. When you had 100 on the same day, 100 times the date in that listbox. Is there a way to filter out the same dates and show each date only one single time in my listbox?
I have List box called 'lstNote' base on a query 'qryNotes' with filter tied to textbox 'filter' on my main form 'frmNotes'. The filter specifies criteria for field called 'ntype' on 'qryNotes'.
I have buttons that change the filter field to specific criteria. The listbox works fine this way for filtered records.
I want to also be able to not have any filter for the 'lstNote' so that all records for 'qryNotes' are listed without criteria.
I tried, but was not successful, to set the filter criteria to a wildcard or no filter with
IIf(IsNull(Forms!frmNotes!filter),(qryNotes.nType = Like *),Forms!frmNotes!filter)
But this produces no records at all.
Any suggestions? Do I need to go down another road?
Basically I want to listbox to either show any of the filters and also all records.
I have a form called “frm_TrainingLog” based on “TrainingLog” table. This form is continuous and tabular – I need to have it this way. In the header of this form I’ve created a listbox called “QuickSearch” which displays staff details i.e. StaffID, Name etc.
The mainform and the listbox are linked using the following code:
The above code does partially work and selects the right record in the mainform but it doesn’t filter out rest of the records which are not equivalent to selected StaffID from the listbox.
This im sure is a easy question but I am just trying to learn access so I am having a few problems.
I have made a form that contains 2 comboboxs and a listbox.
How can I use the 2 combobox to filter a table and to place the information into the listbox. Is it possible to use either 1 of the combo boxes or both to get the filtered result.
I am using the selections made of the form to generate a query for the user.
I have a CITIES listbox that is populated with values from a stored query.
I would like to make it multi-select and populate a LOCATIONS list box and a NAMES list box based upon the CITIES that are selected.
I have the locations currently populated from a stored query that reads the City selection from the Form. It looks like this
Code:
SELECT DISTINCT (t_location.LOCATION) AS Expr1 FROM t_location INNER JOIN t_asset_master ON t_location.LOCATION_PHY_ID = t_asset_master.LOCATION WHERE (((t_location.CITY)=[Forms]![MasterQueryGenerator]![CityList]));
I also want multi-select so that is you can un-select all and get the results for all cities.
Here is my half thought approach.
Code:
Private Sub CityList_AfterUpdate() 'Dim LocQryStr As String 'Dim r As Integer 'Dim ctl9 As Control 'LocQryStr = "SELECT DISTINCT (t_location.LOCATION) " & _
[Code] ...
I intended to have the variable LocQryStr as the row source but I abandoned the idea of having multi-select when I saw that .Selected(I) never returned true. Its like the values aren't read in this subroutine.
I have a list box called "product list box" based on a query called "searchqry", i also have another listbox called "type list box" , how do i get the type list box to only show "types" based on the section in products list box?
I am just starting out in Access Development. I have a database that runs a logistics department. This was working fine until the users wanted a little more tweaking.
The report prints out the vehicles with all corresponding drops. This comes out all on sheet.
Is there a way that I can create a form to filter the report via a multi select listbox and print each drop selected on a seperate sheet of paper.
I have a form which displays records of our products, on that form I have now put a list box which displays the ancillaries to the products.
both the form and the list box run off queries.
I have the same unique identifiers in both queries.
I need to filter the listbox by the unique identifier every time I move record.
At the moment the list box stays populated with all the ancillaries, how do I filter it programatically to list only the ancillaries with the same unique identifiers as in the current record?
I am trying to get my VBA to filter the subform, as currently it does nothing! I have copied it from a source on another forum and at the end of the VBA it originally opened up the query.
However I am trying to tailor this query so that instead of it opening the query I can have a datasheet on the form that displays the filtered records..
There are 3 multiselect listboxes
Here is my code
' This code uses ADO and ADOX and is suitable for Access 2000 (and later). ' A reference must be set to Microsoft ADO Ext. 2.7 for DDL and Security. Private Sub cmdOK_Click() Dim cat As New ADOX.Catalog Dim cmd As New ADODB.Command Dim qry As ADOX.View
The main form has textbox & a Listbox with which I filtered a datasheet inside a sub form. Everything worked fine only the listbox [Discipline] is not working !! it cuase Run-time error: 3831 - The multi-valued field "[Category]" cannot be used in a WHERE or HAVING clause.
So how do I filter a multivalued Listbox field [Discipline] ?
Private Sub cmdSearch_Click() 'On erorr GoTo errr Me.tblFLM_subform1.Form.RecordSource = "SELECT * FROM tblFLM " & BuildFilter Me.tblFLM_subform1.Requery Exit Sub errr: MsgBox Err.Description End Sub
I have a report based on a query, the report loads filter based on dates input to the query from Form1 when report loads. I want to filter this report further from a listbox on form2, but I want the listbox rowsource to populate based on a field in the loaded report. Is this possible?
I have a listbox where the rowsource is a SQL statement. I didn't know if I should try that or just use a query for what I am doing. The listbox is based on our client table, which is a huge number of people, and is showing 3 out of 5 fields.
I have two text boxes, one for first name and one for last name.
I would like the listbox to filter as I search by either field OR by both. Right now, I have the on change event for each with a SQL statement with a Like '*" & Me.textboxname.text & "*' and then a Me.clientlist.rowsource= at the end. So I can get each text box to filter the listbox individually, but I can't get it to filter with both. I think it is a matter of the focus changing, but I could be wrong.
1. On my main form, I have a listbox, I would like to edit the values of the listbox.
To do this, I have a popup form with 2 listboxes, one to have the values of the listbox on the main form, and the other listbox with option values for the 1st
1) how to i pass the rowsource sql of the listbox on the main form to the listbox on the popup form
2) how on closing the popup form, do i update the rowsource sql listbox on the main form from the changed value of the popup form listbox rowsource sql
Okay then, after much trouble and confusion, I finally realized I need to use an Extended listbox in order to allow for multiple items to be selected from a list on my form (rather than the evil multiple selection combobox!).
However, now I am trying to figure out how to make one listbox (IndustryClassification) only be visible if the item "Industry" is selected in another listbox (TypeOfBusiness). Coding I can use for this in the AfterUpdate event of the listbox?
