I use Me.Filter & Me.Filteron to filter the data from the table to display in the form, i used this in On Open event & This is working fine.
But in the filtered form when the user right click and filter some value and unfilter the search (in the bottom of the form next to search (Navigation Button) ) then this shows all the data from the table i.e its not taking the on open filter condition.
While applying filter in forms, i have 6 fields in the form and i want to display the data even one of the filed is with 0.
I used the below code, but this one display the data where all the fields are 0. I tried or in place of and but still its not working.
Private Sub Form_Open(Cancel As Integer)
Me.Filter = "[Placed]=0 and [receievd]=0 and [Ordered]=0 and [processed]=0 and [delivered]=0 and [closed]=0"
Me.FilterOn = True
End Sub
So what I've basically got here is a form with 4 combo boxes and a button that when clicked will filter the results of a table (which is a subform/subreport) based on the values inside the combo boxes. So the problem I have is that when I open up the form it displays a fully filled table but I just want to display the row names and a blank table until the filter button is pressed.
View 2 Replies View RelatedI would like to filter data from a table using a query (from an data input form). The objective is to output all results if input form field is empty and to output results higher or equal to the type in the field if field is not Null. The query code is as follows:
IIf(IsNull([Forms]![Form2]![MaxDiffInput]);[Maximum operational pressure (bar)];[Maximum operational pressure (bar)]>=[Forms]![Form2]![MaxDiffInput])
However, is not providing any result when the input field (MaxDiffInput) as a value.
i have a main form named(EMP) i have a subform named(SEMP)with EMPID i have an another form Named(SDetail) with EMPID i want to open form Sdetail with filter records for data select in subform (SEMP) ,EMPID field Subform SEMP in as datasheet view. i can open sdetail for selected records only
View 14 Replies View RelatedMy db has multiple linked tables. As time passes and work on a project continues data needs to be added to a separate table that is linked to the first table to be populated.
i.e., Initial design data is entered first, when drilling is complete more data is added to a linked table, when drilling is surveyed yet more data is added to the second table.
What I want to be able to do is to query for a particular set of existing design data, display this on a form and on the same line enable data entry to other fields from other tables which are linked to the existing design data.
I would like to filter a data from a table using a combo box in a form.
The field I would like to filter is called ManufacturersID in MainTable and consist of text and wildcard characters [e.g., Teledyne O&G (ODI), TE Connectivity (Deutsch), etc...], so are the combo strings which are extracted from the table ManufacturersTable. It is not filtering anything. I suspect that the wildcards and spaces are the problem. I also tried to get the combo string to a text box in the form and use it in the query with no success. Additionally, I also tried Like [Forms]![FormName]![textbox] in query criteria but still not filtering...
How can I overcome this?
Display data from Query into Form..I am attaching the database dbtest.zip which contains a table, couple of queries and form.I have done what ever settings I could after going thru some tutorials / discussion forums online, but to no avail.
All that I want is, when I open the form "frmtest" in "form view", and select CS in Combo 8, the corresponding fields in the form viz Item name, Sl No and System Name should get updated on the form. I want to view it in "Single Form" format.
I have a form that displays employee details. I've also created a query that calculates the current age of all employees and updates automatically. I've also created a subform that displays the query data.
My question is, how do I get the query data to display on my main form? Can I do it directly from the query or do I have to use the subform? There are multiple columns on the form and I want to add it as a new column that displays the same as the rest but continues to update automatically.
I am new to the Access programing. One of our clients wants to export the record set that is being displayed on the form to excel. We are using ADODB Recordset to display the data on the form. We also have some computed columns. Is there any way that I could export the data to excel?
View 4 Replies View RelatedI have a form where I am entering orders. For this, there is only 1 item and 1 customer per order. The Order_Table is the 'general' of the form. However, I want a Customer_name dropdown on the form, and return data to 'display' on the form (but capturing and ONLY storing the Customer_no), once the user makes a selection.
Additionally, in the same vein, I want to have an Item_name list, where the user selects one from the listing, and display (again, no edit) the name. Again, only want to store the Customer & Item numbers on the Order table.Here's the 'general' table layout (I've taken out what doesn't matter):
Table: Order_Table
Order_no
Customer_no
Item_no
Table: Customer_Table
Customer_no
Customer_name
Table: Item_Table
Item_no
Item_name
I have a modal form with a combo box and a search button.
When the button in pressed, the value of the combo box is the parameter of a query.
Copy and paste of the search button code:
Code:
Private Sub btnSearch_Click()
Dim db As DAO.Database
Dim qdef As DAO.QueryDef
Dim strSQL As String
[Code] ....
I've tested the SQL query produced by the search button and it works, but when I try to push the button, I receive an error on the following line:
Set qdef = db.QueryDefs("qryFilteredData")
I want to create a navigation form, or any form for that matter that has an embedded report. The report has data arranged by ClientID. I would like to create buttons down the left side of my form (why I thought a navigation form could work) where I can put the client name on the buttons and when I click them the report will filter to only show that clients data. I have client tables and the report data linked in queries, but just need to know how to get started with these buttons acting as ID sorters.
For example:
ClientID: 1 = Client: ABC Corp
In my report ClientID 1's data is grouped along with all other client ID's.
In my form I'd like buttons down the left side with ABC Corp written on it (followed by buttons for the other clients) and then when I click the ABC Corp button only ABC Corp's data shows on the page from the embedded report...
My intentions are to get my combo box to display data into a field in my form, when it is changed/selection is made. So far my form has the following:
Combobox: CBOCharacters
Field: CharacterGender
Both of these are in the same table; tbl_Characters. The data type for CBOCharacters is a number and its called CharacterID in the table.
So far I have created this piece of code:
Private Sub CBOCharacters_AfterUpdate()
Me.CharacterGender = DLookup("CharacterGender", "qry_StillNeeded", "[CharacterID]= " & Me.CBOCharacters)
End Sub
When I run this event procedure i get an error:
Runtime error '2471'
The expression you entered as a query parameter produced this error '[CharacterID]'
I have a form and this form shows some values from one table. One of the fields named as Key. I want to open another form and show the record that has the same value as Key.
I am able to make this with filter but the form opens and when the user navigates the record, it creates a duplicate value in related table.
I want to open form and find specific data to display and then stop at this record.
I have a navigation form with a combo box. The combo box has a running list of manifest numbers. I select a manifest number, then click a button that brings up a new form with data related to the selected manifest.
However, I have to click and unclick the 'Toggle Filter' button on the new form to show the correct data each time I open the form.
I am trying to display a table records on the form with this code:
Private Sub Form_Load()
Dim rs As DAO.Recordset
Dim str As String
On Error GoTo Err_cmd_vimport_Click
'defining the form recordset
[Code] ...
Err_cmd_vimport_Click:
MsgBox "Error No: " & Err.Number & "; Description: " & Err.Description
Resume Exit_cmd_vimport_Click
End Sub
however i could not be able get any results in the form as if the debugging is not showing an error.
The recordsource is a query with over 6,000 records. The form currently lists the records in datasheet format with header and footer for things like buttons and filtering. The client wants to be able to go from page to page of the souce query, showing 100 records on the form at a time.
But at the same time, they should be able to filter or sort the data source in it's entirety. The person who created the form came up with what seems like an awful solution to the problem. It seems to use a random number generator to determine how many records to portray at a time. I see this in the code as well as in operation, because the number of records on page to page varies. It doesn't even start out at 100! Worse yet, using a sort on the page only sorts the records that are visible.
I have a pretty simple form that includes subform. Subform's table is linked to main form's table with parent/child relation. Connecting fields are main table's ID field and corresponding field in child table. Subform is in datasheet view. This is pretty basic stuff so there should not be any problems, but every time I apply a quick filter in main form it causes data in subform become invisible. There is single row in subform, but all it's fields are empty.
View 5 Replies View RelatedI've established a many to many relationship using a junction table.
So I have 3 tables (A for "materials", B for "batches", and J for "junction")
Form A is linked to table A, and contains a subtable linked to a query from table J. This allows me to input materials into table A and then list all of the batches it may be used in that are in table B. I successfully got this to input all the batches and materials combinations in table J.
Now on form B, which is linked to table B, displays the batch information, with the subtable J.
My problem, is that only the materials primary key is showing, not the other information that should be linked from table A.
In my form (source tblJobs) i input a contract number from tblContracts. but i would also like it to show the contract address when the contract number is entered. Both fields belong to tblContracts but i only wish to enter the contract number, the address will just be used as a reference as it isnt something i would have to enter again.
So for example
112 - Main Road
If i enter 122 in my ContractNo field i would like it to show the contract address for that specific contract.
Can i do this? If So how?
I am new to Access 2010. When working with a form, how do I display the field list? The list of fields for the table associated with that form.
View 1 Replies View RelatedI have placed a filter button on a form as a filter and written the following on-click event procedure:
DoCmd.SetWarnings False
DoCmd.RunCommand acCmdApplyFilterSort
Me.Filter = "ACCOUNT_DO_NOT_EMAIL = 'HS'"
Me.FilterOn = True
When I click the filter button I get a blank message box titled 'Microsoft Access" and an OK button, when closed the filter works perfectly.I have checked this procedure in other forms and it works without showing the blank message box.The only difference with this form is that its control source is a union query.
I am new to access (2007), There is a datasheet in the form where we enter our time in/time out. We enter data using the form but that is one data at a time only. So I tried to paste multiple data (records) from excel into the access table. After pasting into the table, the data appears in the query, but not in the form.When I go to the form to check if the data I pasted into the table will appear in the form's datasheet...some data appears but some does not.
View 2 Replies View RelatedHow to update data from one table to another table using form.
I have data coming from design team in Database 1 and using form i want search data and assign the job to a person and store it in the database with his name. I have to do this because database from design team is read only.
I am trying to filter information in a table like you can filter information in columns in Excel. For example, if I have a table with data in it like dates and times and I wanted to filter to find all records with the date of 2/5/2008, how could I do that easily? Can it be a drop down box like in Excel. I'm making a program for someone, and I don't want for them to be able to change anything in the program so I have disabled viewing of some toolbars, besides, the filter button in the toolbar never does what I want it to do.
Thanks!