Forms :: Filtering Report By Multivalued Listbox

Dec 2, 2013

I found a code which is work good with subform table for searching multivalued Listbox but it doesn't work with open report vba code. This is the code is used for filtering the subform and i need it for openreport command

If Me.cboDiscipline > "" Then
varWhere = varWhere & "[Discipline].value = '" & Me.cboDiscipline & "'"
End If

This the code (note: its for open filtered report)

Private Sub Toggle3_Click()
Dim strReport As String
Dim strDateField As String
Dim lngLen As Long
Dim strWhere As String
Dim lngView As Long
Const conJetDate = "#mm/dd/yyyy#"

[Code] ....

View Replies


ADVERTISEMENT

Forms :: Using ComboBox To Look-up A Multivalued Field And Select Items In Listbox?

Jul 21, 2014

I'm creating a Form called Pharmacy where I can select a [Diagnosis] from a combo box in the form. This combo box source references a table called tblDiagnosis where each Diagnosis also has a multi-valued field called [Indications].

The Pharmacy form also has a multi-select listbox with all possible Indications. I would like to write a VBA code such that when a Diagnosis is selected, the Indications for that Diagnosis are automatically selected/highlighted in the listbox on the form as well.

As such, by selecting a Diagnosis, all the indications attached to that Diagnosis will automatically be selected; however, if additional indications are needed, they can still be selected afterward.

I know that there is a function Me!Listbox.Selected(i) = True, where i is the row of the entry in the listbox. However, the i in the listbox does not correspond to the ID of the Indication. I think that if there is a way to select listbox items by name, that would be much more efficient.

The reason I have a listbox, is because this listbox of Indications then references another table called tblDrugs where all drugs that are approved for the selected indications selected are filtered and displayed.

View 1 Replies View Related

Modules & VBA :: How To Filter Multivalued Listbox Field

Nov 29, 2013

The main form has textbox & a Listbox with which I filtered a datasheet inside a sub form. Everything worked fine only the listbox [Discipline] is not working !! it cuase Run-time error: 3831 - The multi-valued field "[Category]" cannot be used in a WHERE or HAVING clause.

So how do I filter a multivalued Listbox field [Discipline] ?

Private Sub cmdSearch_Click()
'On erorr GoTo errr
Me.tblFLM_subform1.Form.RecordSource = "SELECT * FROM tblFLM " & BuildFilter
Me.tblFLM_subform1.Requery
Exit Sub
errr:
MsgBox Err.Description
End Sub

[Code] .....

View 1 Replies View Related

Forms :: Filtering Listbox Using Combobox?

Jun 23, 2015

I'm trying to filter the listbox using a combo box.

So I have a Combo box that has the list of the subjects and a listbox with the list of students.

I wanted to show the list of students who are registered in selected subject.

View 3 Replies View Related

Forms :: Filtering Listbox - Cannot Go To Specific Record

Apr 28, 2014

I am using the Filtering a listbox method from this post [URL] .....

It works great apart from when i type too many characters and no search results can be found i get a run time error '2105' you cant go to the specific record.

I think it may be because my form has a row source. When the example uses an unbound from?

View 1 Replies View Related

Forms :: Filtering A Report With A Combo Box

Sep 12, 2013

I have a form that filter records off of combo, I want the user to run reports based off of the filter selected in the combo box.Here's the code I've been toying around with:

Code:

Private Sub ReQuote_Click()
Dim strCustomer As String
Dim Filter As String
If IsNull(Me![cboFilter]) Then Exit Sub

[code]....

I ripped it off of another thread on here but my needs are slightly different so I couldn't quite get it to do what I wanted.

View 6 Replies View Related

Listbox Filtering

Aug 30, 2005

I have done this before with success but can't seem to sort this out for some reason. Maybe someone can spot the trouble...

I am trying to filter a listbox on my form with a combo. Here is the code behind the combo:

Private Sub RepSort_AfterUpdate()

Me.listbox1.RowSource = "SELECT [Basic Entry].[Record Number], [Basic Entry].[Reps], [Basic Entry].[Date], [Basic Entry].[Inquiry Type], [Basic Entry].[Inquiry Sub-category], [Basic Entry].[Policy Type], [Basic Entry].[Caller Type], [Basic Entry].[Irate Call] " & _
"FROM Basic Entry " & _
"Where {{{[Basic Entry].[Reps]=[Forms]![Entry_Form]![RepSort] Or [Forms]![Entry_Form]![RepSort] Is Null)=True))"

listbox1.Requery
End Sub

After changing the combo (RepSort), the listbox is blank. I have tried this with a table as source and as a query as source. Also with and without the requery.

If someone can spot what is wrong with the code, please fill me in!

Thanks :confused:

View 10 Replies View Related

Filtering A Listbox

May 16, 2007

I have two tables of information. One is a customer contact list, the second is a list of services currently assigned to the customer.

I am trying to create a setup that allowes me to find the customer name, probably in a table or querie, open up their contact information and have a listbox of all the services assigned to them at the bottem. I would then like to be able to open up one of these services in another form.

'm sure this is possible, but I'm having difficulty getting the listbox to update it's filter for each document. Specifically, as I click through to the next record, listbox does not seem to pull the new Customer ID #.

Here is a Row Source line I got online. It seems to pick the first CID no problem, but does not seem to update for the next one.

SELECT [Policies].[Client Number], [Policies].LAST, [Policies].FIRST, [Policies].MI FROM [Policies] WHERE ((([Policies].[Client Number])=Forms![CLIENT DATA2].[FF CLI #]));

If anybody could direct me to a good source of information on this, I'd appreciate it.

Thanks

View 1 Replies View Related

Reports :: Forms With Listbox To Filter Report

Feb 24, 2014

I have a report on this report there is a Destination City field and a Current City field, loaded from a table. I have a command button that loads a form to filter on the destination city, I have another command button that loads a form to filter on the current city location.

What I would like is, when I use the form to filter the destination city, then load the form to filter on current city, I want the listbox on the form for the current city to only list cities that are associated with that destination. Both form listboxes have the rowsource from the same table, just different fields. Is this possible?

View 7 Replies View Related

General :: Filtering A Listbox Using Text Box?

Jul 31, 2013

I have a form on which I use combo boxes to filter a listbox using the following code.

Private Sub FilterpartsList()
Dim strRS As String
' Filter the list box appropriately based on the combo box selection(s)
strRS = "SELECT partsquery.partname, partsquery.Heritage, partsquery.Description FROM partsquery"
If Not IsNull(Me.cbomodelID) Then
strRS = strRS & " WHERE modelID = " & Me.cbomodelID

[code]....

View 5 Replies View Related

General :: Filtering Listbox Based On Tab Control

Jul 24, 2014

So I have a Tab control. Each tab is assigned to a specific user (which is controlled through another form). So If I assigned Page1 to Smith then Page1 caption reads Smith. Within each page is a list box that is filtered based on what name is in the caption. This works perfectly. My problem is I have another list box that is not within the tab control. I wan this to be filtered based on what tab is active. Both list boxes are bound to a query.

View 4 Replies View Related

Queries :: Filtering Data Between Two Dates On Listbox

Feb 4, 2014

I've filtered a listbox query between two dates selected by a user through an unbound text, however the listbox only changes after you click it. I've requeried it after someone updates the 2 unbound date textboxes, yet it still doesn't work.

View 1 Replies View Related

General :: Combobox Filtering Listbox To Only Show Same Records

Apr 4, 2013

Ok I have a list box (CounselorInitials) and a listbox (AssignedToYou)

The list box has 6 columns and is using a query (AssignedToMe). The important one is the 6th one (Counselor). All working off a table called DityLog.

I want to select initials in the combo box and then it will filter the listbox and only show records that are the same.

So if I select initials MC from the combo box I want the Listbox to show all records that have the initals with MC.

View 1 Replies View Related

Forms :: Filter A Report Based On Listbox Selection - Apostrophe In Results

Feb 17, 2014

I use the follwing code to filter a report based on the listbox selection on a form. Below is the code I use, the problem it will error if the results have an apostrophe in the string.

Private Sub FilterDesc_Click()
Dim strWhere As String
Dim ctl As Control
Dim varItem As Variant
'make sure a selection has been made
If Me.ListCarrier.ItemsSelected.Count = 0 Then
MsgBox "Must select at least 1 Carrier"

[Code] ....

View 7 Replies View Related

Reports :: Filtering Report To Only Show Current Month Report?

Nov 16, 2014

The aim of what I am doing is to create a monthly statement to give to our intermediaries that shows the commission they will receive each month for the deals they have referred. I have managed to create this report, HOWEVER I can't figure out how to filter out which month I need, so I a report for Jan, Feb Mar etc... The idea is that at the end of each month I need to run the report so only the latest month shows...

View 3 Replies View Related

Forms :: Dynamic Row Source For Listbox From Multi-select Listbox

Jun 10, 2015

I am using the selections made of the form to generate a query for the user.

I have a CITIES listbox that is populated with values from a stored query.

I would like to make it multi-select and populate a LOCATIONS list box and a NAMES list box based upon the CITIES that are selected.

I have the locations currently populated from a stored query that reads the City selection from the Form. It looks like this

Code:

SELECT DISTINCT (t_location.LOCATION) AS Expr1
FROM t_location INNER JOIN t_asset_master ON t_location.LOCATION_PHY_ID = t_asset_master.LOCATION
WHERE (((t_location.CITY)=[Forms]![MasterQueryGenerator]![CityList]));

I also want multi-select so that is you can un-select all and get the results for all cities.

Here is my half thought approach.

Code:

Private Sub CityList_AfterUpdate()
'Dim LocQryStr As String
'Dim r As Integer
'Dim ctl9 As Control
'LocQryStr = "SELECT DISTINCT (t_location.LOCATION) " & _

[Code] ...

I intended to have the variable LocQryStr as the row source but I abandoned the idea of having multi-select when I saw that .Selected(I) never returned true. Its like the values aren't read in this subroutine.

View 5 Replies View Related

Forms :: Listbox To Show Types Based On Section In Other Listbox

Sep 9, 2013

I have a list box called "product list box" based on a query called "searchqry", i also have another listbox called "type list box" , how do i get the type list box to only show "types" based on the section in products list box?

View 1 Replies View Related

Forms :: Passing Listbox Rowsource To Another Form Listbox

Dec 14, 2014

Using a popup form

1. On my main form, I have a listbox, I would like to edit the values of the listbox.

To do this, I have a popup form with 2 listboxes, one to have the values of the listbox on the main form, and the other listbox with option values for the 1st

1) how to i pass the rowsource sql of the listbox on the main form to the listbox on the popup form

2) how on closing the popup form, do i update the rowsource sql listbox on the main form from the changed value of the popup form listbox rowsource sql

View 3 Replies View Related

Forms :: Make Listbox Visible After Selection Of Another Listbox

Oct 23, 2013

Okay then, after much trouble and confusion, I finally realized I need to use an Extended listbox in order to allow for multiple items to be selected from a list on my form (rather than the evil multiple selection combobox!).

However, now I am trying to figure out how to make one listbox (IndustryClassification) only be visible if the item "Industry" is selected in another listbox (TypeOfBusiness). Coding I can use for this in the AfterUpdate event of the listbox?

View 7 Replies View Related

Filtering A Report

Nov 10, 2014

I have a calculated field in my report which is the sum of scores for students i.e. each student does 8 subjects and my calculated field tallies how many each student has passed. so the report shows a list of students and the number of passed subjects. Now I want to show only those who have passed 7 or more subjects. Can such a filter be done? It is obvious I can't use the query since the summary calculate field does not exist in the query.

View 7 Replies View Related

Filtering Dates On Report

Oct 6, 2006

hi!
i tried searching the forum for a possible solution to my problem. unfortunately, no luck so far.

Here's my problem.
i'm working with a linked table in access with a date field (service_dt) formatted as a text. if i open the table, the date shows up as 1-Jan-2006. i use this table to populate a report.

im trying to filter the report so that it would show records that have a specific date range.
here's what i write on the filter of the report:
service_dt Between #01/01/2006# and #12/31/2006#
unfortunately, its not filtering properly.
i would appreciate any thoughts.

thanks.

View 3 Replies View Related

Reports :: Filtering A Report

May 28, 2013

report i'm trying to preview. I have a form which will display a person's training record and on that form i'd like to have a button which, when activated will show the record as a report in Print Preview. However, i'd like to just preview the record i'm looking at and not all of that person's records.

View 4 Replies View Related

Filtering Data On A Report?

Apr 29, 2014

In the production report that I made, I want to achieve 2 things.

1) I want the report to filter automatically to display only the current month's invoice. As you can see, all of the invoices are displayed from 2012-2014.

2) I also want to be able to filter the report based on the invoice number. I want this to be achieved by clicking the invoice button on the top part of the report.

View 1 Replies View Related

Filtering By Date In A Report?

Oct 28, 2013

I've created a Form where I enter all my data - then I created a Report to output this data, it includes two buttons to filter based on one category. That's working fantastically well for me.

But now I would like to filter on dates. For example, last 7 days, last 14 days etc - and also give the user the option of filtering between x and y dates. I've discovered this is easily done by right-clicking the date field in the report, but I'd prefer to embed these commands into buttons etc so it's easier to navigate.

View 2 Replies View Related

Help Sorting And Filtering Data For A Report.

Oct 22, 2004

Hi everyone,

I am having a little trouble using a 'canned' Access database. Using the built in Asset Tracking database, I am trying to get specific information on the Assets report. The Assets report generally shows all assets, I've made a new report to show the data sorted by the phone extension number, also the room number (which is how our inventory is tracked).

This works well, except, I want to be able to view one extension/room at a time. To do this, I added a button on the 'Enter/View Emplyees' form to preview the report, and created a macro to get this info. However, it only shows whatever data is highlighted in the emplyees sub-form. How can I get all of the data assigned to each extension to appear on the report?

Tried to upload the file, but it's too large. Can email if requested.


Thanks,
Brian

View 1 Replies View Related

Filtering In A Report - Show Numbers That Are More Than 2 Only

Oct 20, 2014

In my report there is a field with a number of numerical value. I want the report to show those numbers that are more than 2 only.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved