Forms :: Find Record In Table That Matches Textbox Input
Jan 5, 2014
I'm trying to build a search form.- Access 2007
I have a table (Table1), contains a 'part' field.
I wan to build a form with a blank text box (txtbx1) where users can enter a part description, this will search records in Table1>part and return a list of parts that match the textbox input.
Here's what I've done -
txtbx1 - property sheet - control source - part
event - on enter - ...
I've built an expression -
[Table1]![part] = [txtbx1]
hoping that this would match records 1n Table1 to txtbx1
Basically I want to type the ID(key) of a record table in a unbound text box and then by pressing a command button to be able to bring up that record (in form view). I do not want to use a combo-box.
So what do i write as VB code in the Private Sub mybutton_Click()
Table name is [ACTION_ID], ID field name is [ACT_ID] & text box name is [TEXT_BOX]
I have a form that has a button that calls the following code:
Sub ClosePO_Click() Dim db As DAO.Database Dim mvalue As String, strSql as string Set db = CurrentDb mvalue = Me.Combo73 'combo box on OpenPO Form strSql = "UPDATE Print SET OpenPO = NO where [GPO Invoice Number] = '" & mvalue & "'" Debug.Print strSql db.Execute dbFailOnError db.Close Set db = Nothing End Sub
When I run (or step through the code, I get the Run-Time Error 3078 ... database cannot find the input table.However, when I copy the debug.print output in the immmediate window and paste into the query builder, the query runs. Here is an example of the debug.print output:
UPDATE [Print] set OpenPO = NO where [GPO Invoice Number] = '40333' where OpenPO is a yes/no field and [GPO Invoice Number] is a string
Basically I want to type the ID(key) of a record table in a unbound text box and then by pressing a command button to be able to bring up that record (in form view). I do not want to use a combo-box.
So what do i write as VB code in the Private Sub mybutton_Click()
Table name is [ACTION_ID], ID field name is [ACT_ID] & text box name is [TEXT_BOX]
I am trying to find company matches between 2 tables. The issue I have is that the spellings on table A differs from table B.Some of the differences are minimal like "St. Annes" and "St Annes". And some really big "St. Annes" and "Annes, ST London".
I have a table with 2 fields in it - Type and Pallet_Case - using a form the user enters the name of the Type and then from a combo box selects either Pallet or Case. There is a button on the form that is to save the new record to the table. (code below) The strangeness that is happening is that when the new record is added to the table, whatever is the first existing record alphabetically in the table is changed to the same Pallet_Case selection that was made for the new record.
I have a list box that displays on the form that is updated after a new record is added to show what records exist in the table (this is done by a query of the table and sorts on the type), so I can see this happening without having to open the table. It doesn't matter what sort order I put the list box in nor the table it still changes the first record alphabetically. And it is only change the Pallet-Case field. I even changed the first record to something else and it still did this.
Dim dbs As DAO.Database, strSql As String Set dbs = CurrentDb strSql = "Insert into [PP Type TBL] ([Prepack Type],[Pallet Case]) Values ('" & Me.Type & "','" & Me.Pallet_Case & "' )" dbs.Execute strSql, dbFailOnError
Input box Search problem. I have been using the following to find a record in my frmMain using an Input Box:
Private Sub cmdClientIdSearch_Click() 'Searches for Client by ID number Dim rs As Object Dim strCriteria As String strCriteria = InputBox("Please enter Client ID" & vbCr & "Do not type leading zeros")
[Code] ....
It works great if I run it from a command button from frmMain. But, if frmMain is open and I run it from a command button on my switchboard, I get the following error message:
Run Time error 7951. You entered an expression that has an invalid reference to the Recordset Clone Property. I tried inserting a command to open frmMain in the first line, even before the two Dim statements, but I get the same result.
I want to put a textbox on a form that will take user input (a postal code) and put it into a table. I'm not sure how to do this. Is it even possible, and if so, any suggestions?
I have a table with a field named 'Comments'. On the form, I would like to have a text input and a command button. After the user enter the comments onto the textbox and subsequently click on the command button, the comments will be input onto the 'Comments' field of the table.
Q1. How can the text box be link to the 'Comments' field of the table? Q2. Only after I press the command button then the input text on the text box will be transfer to the table. What is the command for that?
I have a table with records for products from each sales region (4 regions, N, NE, S, W). The table has the following fields: Region, Product Name, Product Description, Category, Business Line, and Supplier.
While the Product name is consistent across the regions the description, category, bus.line and supplier may have slightly different entries in each region. I need to build a query that when any of the Product Description, Category, Business Line, and Supplier fields do not match across divisions for each Product Name will display all the records for that Product Name. Any ideas?
I have a form with a Count textbox. It's control source is a field named "Audit Count" in the table "DB Audits". The idea of the textbox is to display a running count of how many audits a specific auditor has completed that day. To do this I have the textbox set up with a default value of:
Assuming I'm using the DCount function correctly, this is supposed to count the number of [Loan Number] records entered in the "DB Audits" table by the auditor (whose name is found using fOSUserName()) on today's date. So, for example, when opening up the form at the beginning of the day the Count textbox would read 1 and when the auditor clicked Save and New it would increase to 2.
The problem I am having is something I encountered while doing some random tests of the form. If an auditor submitted an audit (let's say the 1st of the day), the form correctly displays the next count as 2. However, if the auditor were to delete the record from the underlying "DB Audits" table while the form was still open, if they were to enter a new record, the Audit Count field would display 2 even though it should be 1 (since the 1st record had been deleted).
How can I have the Count textbox refresh whenever someone deletes a record from the table while the form is still open? I tried a Requery command using the AfterDelConfirm event but I couldn't get it to work.
I'm looking for help with this error message: "Microsoft Jet database engine can't find the input table..." And the reason it can't find it seems to be that it's looking for an DBF file (which was a format I once had the data in, a long time ago) rather than the mdb file which I have been using forever. Any ideas?
I want to put a textbox on a form that will take user input (a zip code) and put it into a table. I'm not sure how to do this. Is it even possible, and if so, any suggestions?
In ContactIDForm it contain 1 textbox name 'TextBox' with Button Name 'Btn'
In ContactIDForm there is only 1 Text Box ContactIDTextBox and 1 Button. User Enters ID in TextBox and On Button Click Event it should check data from TextBox in Table name (ContactDetailTable) in field ContactID and if there is record matching, ContactInfoForm should Open else NewContactForm should open with ContactIDTextBox value in it.
I have a form bound to a table, with a subform in there, and I have a textbox with a source one of the table's fields. I would like the value of this textbox to be calculated based on the values of some boxes in the subform, but I also wont to be able to edit the value on the textbox myself.
Is it possible to have a textbox that get its value both from calucaltions and user input?
My table have orderid along with other columns, i want to create a form where i am having a textbox for order id input by user. Firstly when user sees the form its only with the textbox and table fields, when i put the order id in the textbox the listing should be made.
I have two unbound unlinked subforms residing on a 3rd unbound main form. When I enter the current record on Subform1 I would like the matching record(s) on Subform2 to be highlighted or otherwise formatted. I can get this to work for only the first record on subform2 due to the way I have my code setup on Subform1:
Code: Private Sub Accounting_Unit_Enter() 'find where AUs match. only works for first Subform2 record If Me.[Accounting Unit] = Forms!MainForm.[Subform2]!AccountingUnit Then msgbox "Match" End If End Sub
My thought was that I needed to reference the Recordset of Subform2 and search for all AccountingUnits that match the current AccountingUnit of Subform1,
basically am creating a booking system, i have a add a room form. my form should check whether i already have a room number in my table, which works when the form is filled in. however when my form is null, then i press add new room button, i get this error rather than " please fill your form in"
Error: runtime error '3075' syntax error (missing operator) in query expression 'Room Number ='.
room number is a number field, integer but has primary key. i cant keep autonumber, as my requirement is to add new room number, but the roomnumber has to be unique.
here is the dlookup;
If DLookup("RoomNumber", "tblRooms", "RoomNumber = " & Forms!RoomPackages!txtRoomNumber) > 0 Then MsgBox "This number already exists." Else
I have an MS Access 2010 db that has a main form called switchboard. This has 4 command buttons that open diffrent forms. Also on the main switchboard form i have an unbound textbox called TxtUserName that captures the users environ"username" when the switchboard form is opened.
I have a table called "tblAccessUsers" that i manually enter who i want to use my db. This table will have up to 50 names added to it. Their is only one field name in this table and it is "User Login".
When the user hits any of the commandbuttons on the main switchboard form i need some code that will look at the value in TxtUserName and loop through tblAccessUsers for an exact match. If it finds a match then it will carry out the open form command or if not prompt the user with a message box.
My knowledge of Access and especially VB is quite limited. I managed to create this using a DLookup but that only returns the first record in the table. The logic works but it will not look past the first record.
I have an App that runs a few action queries using:
Code: CurrentDb.Execute "[My Query Name]"
At some point I get this Error: The Microsoft Access database engine cannot find the input table or query <name>. Make sure it exists and that its name is spelled correctly. (Error 3078).The query is there, I can run it from the DB objects window.Queries run using CurrentDb.Execute earlier in the code.
I am building a form in access and I am trying to find a way where user input isn't possible in the associated textbox when "No" from on option box is selected.
I'm trying to run a UNION query that joins five queries through a MS WorkSpace into a DAO.recordset in VB. I'm pulling the data from a SQL Server Database through VB in Access. I'm attempting to open a recordset with a query passed to it as a string. The query is below. For some reason, I'm receiving a message: "MS Jet database engine cannot find the input table or query. Runtime Error 3078".
Here's what's puzzling. When I run a single query without any UNION statement, the code finds the table and runs fine without error, but anytime I join two or more queries with a UNION statement in the VB, it gives me the error.
I've executed the same UNION query in both Access Query Builder and SQL Server's Query Analyzer and they work fine in both environments. It's only when I call the query from a DAO.Recodset with VB that it causes this problem. The following is a sample of the UNION query joining two of the five queries. Does anyone have any idea what could be the problem? The following query executes in about 5 seconds so I don't think there's a "time-out" issue. I'm thinking that the UNION statement may be the culprit. Maybe there's another way to approach joining these separate queries? Any help would be most appreciated. Thanks.
SELECT SalespersonID, Sum([SlsPrice]-[RtnPrice]-[SlsDiscnt]+[RtnDiscnt]) AS fldPrice FROM MyTable WHERE (((Source)='d') AND ((DistrictID)='01') AND ((CategoryID) = 'HCPROD') AND ((BrandID)<>'CSS')) AND (((BrandID)<>'1356')) AND (((BrandID)<>'1400')) AND (((BrandID)<>'1551')) AND (((BrandID)<>'555')) AND (((BrandID)<>'66')) AND (TransDate >= 07/01/2005) AND (TransDate <= 07/31/2005) GROUP BY SalespersonID UNION SELECT SalespersonID, Sum([SlsPrice]-[RtnPrice]-[SlsDiscnt]+[RtnDiscnt]) AS fldPrice FROM MyTable WHERE (((Source)='d') AND ((DistrictID)='01') AND ((ProductID) = '0029800')) AND (TransDate >= 07/01/2005) AND (TransDate <= 07/31/2005) GROUP BY SalespersonID
Set wrkJet = CreateWorkspace("", "pw", "", dbUseJet) Set db = wrkJet.OpenDatabase("DW", _ dbDriverNoPrompt, True, _ "ODBC;DATABASE=DW;DSN=DW2") 'Set rs1 = db.OpenRecordset(strSQL)
I have table A with a list of Work Instruction references (WIREF) and a Issue number (ISSNO).I have Table B wth employees and they too have a Work Instruction (empWIREF) and Issue number (empISSNO).I want to check if the Work instruction Issue has changed since the employee was trained
check: WIREF = empWIREF and ISSNO <> empISSNO for all records in table B
Hi, Newbie problem. I want to display on a form the last entry or (record) from a particular field of a table (the date field of the last club event). I have set the Form Property of 'Data Entry' to 'Yes' to prevent the user from having to scroll through records to get to the next blank record. Could someone kindly give me a clue how to go about displaying that last record of the field. Thank you.
