Forms :: Form Auto-Updating Other Text Boxes
Jun 26, 2014
I have a form where I type in the time a person starts a job. The format is Medium Time. I also have a box where I type in the End time for that job. Also formatted in Medium Time. I have another box that is for if a break happens during that job to return the value 10. My formula for that box is: =IIf([Start Time]<"9:00 AM" And [End Time]>"9:10 AM",10,0). The problem that I am having is that it only works when the time is in the 9:00 AM to 9:59 AM time frame. I need it to work where if a person starts at 6:00 AM and gets done at 2:30 PM to return the value of 10.
View Replies
ADVERTISEMENT
Jul 7, 2006
I have similar text boxes on two different forms. On the first form when I add a value and click the add button it automatically submits that value to the second form. However, on the second form when I select a value and click add, it deletes the previous value given by the first form. I have written code that allows the user to input more than one value on the second form, which works fine.(The previous values do not get deleted) I want to write some code that allows the user to submit a value on the first form, and that value remains on the second form's text box even when the user adds more values on the second form. Also the values are inputted to a table.
One previous suggestions was to put field2=field1 & field 2. However this does not work.
Any suggestions would be a of great help. I am pretty new at Microsoft Access. Thanks for the help
View 1 Replies
View Related
Mar 16, 2015
How to trigger the below VBA Code under one Change() Event once a selection is made from the only combobox on my form.
Code:
Private Sub cbxAssociate_Change()
Me.txtFIRJuly14.Value = DAvg("FIR_Perc", "tblFIRStats", "[Associate]= '" & Nz([cbxAssociate]) & "'AND [Month] = 'Jul-14'")
Me.txtFIRAugust14.Value = DAvg("FIR_Perc", "tblFIRStats", "[Associate]= '" & Nz([cbxAssociate]) & "'AND [Month] = 'Aug-14'")
Me.txtFIRSeptember14.Value = DAvg("FIR_Perc", "tblFIRStats", "[Associate]= '" & Nz([cbxAssociate]) & "'AND [Month] = 'Sep-14'")
[Code] .....
View 8 Replies
View Related
May 2, 2014
I have five textboxes for husband with the values typed(HustxtAddress1, HustxtAddress2, HustxtCity, HustxtState, HustxtZip). I have five more textboxes for wife. I have a combo box asking whether the spouse's address is same as the husband - with yes or no. If "Yes" is selected, the text boxes for wife is auto filled with the same values of the husband. I tried with combo box change event setting HustxtAddress1= WifeText address1, it fills only the first field and other fields are empty.
View 2 Replies
View Related
Mar 26, 2013
I have a form that contains a combo box (cboEmployeeName) that pulls data from a query and populates three text boxes (Work Area, Last Name, First Name), This part works fine. Because the text boxes are being populated by the Combo box, they are not bound to the record source tblTrainingSchedule). I need the info that is in the text boxes to populate the respective fields in the record source.
I tested by adding "=tblTrainingSchedule!WorkArea=[cboEmployeeName].Column(3)" (column 3 is the work area) to the "after update" control but it does not populate the data.
View 4 Replies
View Related
May 16, 2013
I have a form called frmPO based on a table called tblPO One of the fields in tblPO is linked to the field idAddress in the table tblAddresses
The following fields exist in both tblAddresses and tblPO
Company
Address1
Address2
City
ZP
State
The form contains controls for these fields on tblPO. I would like to give the user the choice to either enter a shipping address manually, or selecting a preregistered address from tblAdresses. For this I would like a combo box showing the values of idAddress. I f a user selects a preregistered shipping address, I would like the form to fill the rest of the fields based on the value of this control.
My understanding is that I should set a BeforeUpdate event to set the values of the different controls, unfortunately my command of VBA amounts to 0.
View 1 Replies
View Related
Jan 25, 2015
I have strange issue when creating auto populated text boxes which displays rows from combo boxes.
In one database auto populates works with simple text box Control Source edit "=[ComboName].[Column](NumberOfColumn)".
Somehow same method doesn't wotk in different database: here one time I have to insert VBA code at On change Event:
Me.TextBoxName = Me.ComboName.Column(NumberOfColumn)
And other time it wont work with On change but only with After Update Event (code is same).
Another thing this morning happens was that when I tried to add new record trough form where combo box and tex boxes are located, MS Office suddenly stopped working after selecting combo box selection (with message Microsoft Office has Stopped Working). It is 2013 version.
I got it work after deleting and re-inserting VBA code to autopopulate text box at After Update Event.
View 3 Replies
View Related
Aug 2, 2006
Hi all,
I've looked through the previous posts here but can't find what I'm looking for (probably because I can't think of how to phrase it). Basically I've got a text box that allows for entry of the item cost, then a text box called Quantity and another text box that calculates the total cost based on the quantity. Fairly straightforward and works, well sort off anyway.
Basically the text box does not update as soon as the quantity amount has changed. You seem to have to either go out of the form or click on another field.
Any ideas? It's probably simple but it's been driving me nuts now for ages. Any help would be grately appreciated as always.
Cheers
View 1 Replies
View Related
Nov 12, 2013
I am trying to search on EmployeeID field and populate corresponding data like EmployeeName, EmployeePay in other text boxes in the same box .
In my Unbound Form I have three unbound Text Boxes and one Command button:
txtEmpID
txtEmpName
txtEmpPay
cmdFind
In my table EMPLOYEE i have three fields
EmpID -- Autonumber
EmpName -- Text
EmpPay -- Text
View 2 Replies
View Related
Jun 10, 2005
Hi,
I am trying to take text from two different text boxes on a form and place into another text box on the form. I want it to also update the table with this new text.
Example: fname, lname, fullname are text boxes on a form. when user enters fname and lname, I want the two strings/text to be added together and placed in fullname while also updating the table with the fullname text.
Any ideas?
Thanks,
dbnewbie
View 8 Replies
View Related
Jul 13, 2015
GOAL: select the IC number from the combo box and have 5 text boxes auto fill.
I have a table made for the IC number drop down. The columns represent the fields that need to be auto filled.
Making some kind of query to link the combo box entry to the text boxes? Some VBA where the control source is equal to my query? I have tried changing the text box control source to equal columns from my drop down but that did not work.
NOTE: the blue font in the first image represents the text boxes that need to auto fill when I select the IC number from the drop down. The second image is my table from which my combo box is generated. The acronyms are for the two tests on this form.
View 11 Replies
View Related
Apr 14, 2015
I am trying to sum the row in a access form. There are 3 text boxed called TXT1, TXT2, TXT3. I have added an additional text box and typed the following txt;
=([TXT1]+[TXT2]+[TXT3])
Instead of totalling the row it just puts the number together. For example TXT1 contains 1. TXT2 contains 2, and TXT3 contains 3 so the answer should be 6 (1+2+3) but it shows 123. I have tried putting SUM in front but that gives me the total of the whole column not just that row.
View 2 Replies
View Related
May 12, 2014
I have multiple sub forms and want to add specific text boxes of different sub forms into one another sub form. Then all sub forms are incorporated in one main unbound form.
View 6 Replies
View Related
Dec 18, 2013
I have little bit problem in access here, if i want to create two textbox... first textbox for time and second textbox for unit. When I type (time) in first textbox, second textbox will appear automatically the unit number...
Example
1textbox-----------2textbox
1<time<=60 ------- 1 unit
60<time<=120 ------ 2 unit
120 < time <= 180 ------- 3 unit
View 6 Replies
View Related
Nov 19, 2014
I am relatively new to using MS Access 2010. Some fields which i have set up as Memo fields to take report comments. Is there anyway to make the size of the memo field box variable to fit in with the text in the form when viewing in htis mode?
View 1 Replies
View Related
Jan 29, 2015
I'm trying to write code which writes text into text boxes on a form depending of certain content of other text boxes. The names of the text boxes are all very similar
F.i. R1, R2, R3 ...... R12 if the content of these boxes are empty then the content of the corresponding text boxes VR1, IR1, VR2, IR2, VR3, IR3.......VR12, IR12 should also be empty.
In fact I am trying to write something like this
DO UNTIL i=12
if me.R(i).value = "" then
me.VR(i).value = ""
me.IR(i).value = ""
endif
LOOP
But this isn't working. The solution below works but isn't a very nice one, writing 12 times the same code
if me.R1.value = "" then
me.VR1.value = ""
me.IR1.value = ""
endif
if me.R2.value = "" then
me.VR2.value = ""
me.IR2.value = ""
endif
View 4 Replies
View Related
May 24, 2014
I am trying to improve a work process using an existing Access DB.We have a form with multiple texts boxes on it. I need to search through these boxes to determine the total number of occurrences of a specific value. This is not tied to a table.
The text boxes I'd be searching through all have related names: "Element0" to "Element40". And I'd most likely be looking for a "/" within the value in the boxes (value could be 12345/01, for example).Would then be using the result in VBA to apply some conditions, so I would prefer if I could do the count in VBA (the count/sum is the part that is hanging me up.)
I've found multiple ways to accomplish this from a table, but nothing for what I have to work with.I am unclear in my description of what I am trying to do, let me know and I will try to provide more information.
View 5 Replies
View Related
Mar 22, 2013
I am trying to filter a form by using two unbound text boxes that a user can enter in their criteria and then clicking a command button to filter the form using the criteria entered into the text boxes. My fields are as follows:
Bound Field: MondayD1
Unbound text box: txtMonday
Bound Field: SundayD7
Unbound text box: txtSunday
Command Button: cmdSelect
MondayD1 = txtMonday
SundayD7 = txtSunday
I have looked up several options using vb for the on click event of the command button but I either get an error message or the form shows up blank.
View 2 Replies
View Related
Nov 7, 2014
I have a pair of captioned text boxes for taking the criteria for the search result. Currently the text boxes are tied with a date field. I would like to give the user's choice of a number of date fields. After some research, I believe option group control fits for this purpose. Unfortunately, I never try this function before.
View 1 Replies
View Related
Dec 8, 2014
i want to search a phone number in contact information table with column names - number, name, address, dob, gender, f-name, m-name etc and show them in a form with each field in separate text boxes in access 2010.
View 4 Replies
View Related
Jul 29, 2015
I currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.
View 4 Replies
View Related
May 14, 2013
I have a form with 1 unbound listbox as drop down list (entypolst), an unbound text box(entypotxt) and a command button. The list box reads items from a table. I want to change a value (text) on listbox, input a text on textbox so pressing the button add a new record in a table (Table1 fields Category,Product) showing in my form as subform (SFTable1) in datasheet view. For that reason a made the following code:
Code:
Private Sub AddBtn_Click()
Dim ans As Integer
Dim strSQL As String
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim ctl As Control
[code]....
I take the error msg for 0 items selected in listbox and exit the sub.
View 7 Replies
View Related
Mar 14, 2014
there is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
View 4 Replies
View Related
Nov 8, 2004
I have a form with a List Box (List BoxA) that returns a value from a query. I then have a Text Box (Text BoxB) that uses the value from List BoxB and multiplies it by let's say 2. It works giving me the correct value but only becomes visible after I click inside List BoxA. How can I make it visible as soon as the form is opened? I tried refreshing the form data, didn't work and I tried a requery macro which didn't work either.
Thanks,
Lester
View 3 Replies
View Related
Aug 14, 2014
I have a continuous form (2003) with 6 text boxes (StartTime, StopTime, Comments etc...). I would like all the text boxes to have a gray background if the StartTime for that row is less than Today().
View 5 Replies
View Related
Mar 24, 2014
I'm trying to build an database for aircraft operators. I've got the basic tables structure and relationships but I'm stuck on building an search form to filter records by user input.I've got following controls on my form (unbound):
1. AircraftType (combo box) from tblAircrafts
2. CompanyName (combo box) from tblListOfAircraftsOperators
3. TeailNumber (text box) from tblAircraftOperators
4. AirportNameSearch (combo box) from tblAirports
5. PassengersNumber (text box) from tblAircraftOperators
6. ManufactureYear (text box) from tblAircraftOperators
7. SourceSearch (combo box) from tblInfoSource
8. CountrySearch (combo box) from tblCountry
9. CategorySearch (combo box) from tblAircraftCategory
10. EamilToOperator (text box) from tblAircraftOperators
11. InteriorPhoto (Bound object frame) from tblAircraftOperators
12. ExteriorPhot (bound object frame) from AircraftOperators
I need to enable users to search for aircrafts based on those criteria. As I mentioned I'm new to Access and I don't have any advanced coding skills. I have a query build to perform the search and this is the code I've managed to write so far:
SELECT AircraftOperators.RegistrationNumber, AircraftOperators.PassengersNumber, AircraftOperators.ManufactureYear, AircraftOperators.EmailToOperator, AircraftOperators.ExteriorPhoto, AircraftOperators.InteriorPhoto, tblListOfAircraftOperators.OpratorName, tblAircrafts.AircraftType
FROM tblAircrafts INNER JOIN (tblAirports INNER JOIN (AircraftOperators INNER JOIN tblListOfAircraftOperators ON AircraftOperators.CompanyName =
[code]....
View 2 Replies
View Related
