I have a form based on a table which includes the mid field. I want to have a macro that takes the value of the current mid, and makes a new record in a 1-many related table (consisting of record id (auto), mid and trmntdate), paste the mid and insert the current date.For the life of me I cannot get it to work? The process should be something like:copy mid value, add new record to related table, paste value in mid, insert current date in trmntdate, save. I've tried append queries, experimented with copy etc, dabbled blindly with VBA and not got anywhere.
I have created three tables, all of them are connected by one-to-one relationship by same field, as you can see in the screenshot. and at the same time I have created three forms for each table. then I brought two forms in one remaining form. so whenever I entered data in first form and click on the next tab in which another form exist, it gives me this error: "you cannot add or change a record because a related record is in table".
I have a split DB that is in its (hopefully) finally stages of development. Using Access 2010. It is being developed both at work and at home on a 64 bit machine. The remainder of the machines are 32 bit.
All of a sudden one of my most basic sets of code doesn't want to work, but only on my machine at work. It works fine on my home computer and on other computers at work. It is the simplest of codes, run from frmNameA:
The desired sequence of events is to open frmNameA, find the active clients and then click on the [SequenceNumber] to bring up the related record on frmNameB.
When I do this on my computer at work, it asks for the query criteria for the [SequenceNumber] and the criteria for another field. On the home computer and others at work, it works just fine.
In a related problem, I have the following code on the OnLoad event for frmNameB. It opens all the related records for active clients that are in frmNameB. But if there are no related records, it is supposed to cancel the event. Again, it works fine on my home computer and others at work, but not my work computer.
Private Sub Form_Open(Cancel As Integer) 'code when opened from frmNameA and no record exists in frmNameB Dim MyReply If ClientID = "" Or IsNull(ClientID) Then MyReply = MsgBox("No record exits in frmNameB, Do You Want to Exit?", vbOKOnly) If MyReply = vbOK Then DoCmd.RunCommand acCmdUndo DoCmd.Close acForm, "frmNameB", acSaveNo End If End If End Sub
What I can't figure out is why this may be happening, where I might look for errors, and what I might do to correct this.
I have a form within my database in which the user will enter data which will go into 2 separate tables. These 2 tables (Job and Client) are related. At the moment I have a subform in which the user enters Job information, and the main form where the user will enter client information.
The problem being is that the 2 sets of data do not associate themselves with each other, despite being related (The Client will be related to a job number. A client can have many jobs but a job can only have one client etc). It has to be done manually in the table which is not ideal as the DB will be split and rolled out to users via Access Runtime. I have been working on this DB for a while now and the problem is most likely right in front of me but I cannot see it!
I have a database I made to store a list of users and information about each user.
I have a UserDetail table, languages table, previous experience table, current experience table.
UserDetail table as follows: UserID (PK) First Name Last Name Full Name (calculated) Department (using a multi select combo box. There are 3 departments and some people are in both).
I need to do the same thing on each table and each table is very similar so I'll just list one. This is the Previous Experience table:
I have three junction tables. One for each Previous Experience, current experience and language table. The Previous experience junction table has:
ID (PK) UserID PreviousXPID
I created a relationship between the userdetail table and the junction table then the junction table to the Previous Experience table.
Now what I'd like to be able to do is edit people to add previous experience, current experience and languages to each. I already have a form that lets me add a new user to the database. It's just based on the UserDetails table. If I could have a way (perhaps using 3 multi select list boxes. One box for previous experience, one for current experience and one for languages) on that form to add the other details to that person, that would be ideal. I'd like to create a new user. E.g. Joe Bloggs in department 1 who speaks Dutch, used to have Marketing, Chemistry and aeronautical experience and now works in IT.
I can create the new user by putting last first/last name and selecting the department. But to add experience or languages, I have to go into that junction table and add the numbers myself. e.g. user 1, has experience 1,3,4 and 5. I'd like to see the name that relates to the ID and be able to select it from the list in the table I have.
I created a query that shows everyone who has a specific date field blank. Now want to make those names clickable so that it opens a specific form with a certain record related to that individual in the query. Each line with a different individual should open a different person on the form and their corresponding record.
I have a form with 2 subforms, each based on their own table. One displays categories of invoices (e.g. rent, electricity, etc.) including some details like monthly costs.
I would like users to be able to select one of those categories and copy this to another table, after which they can enter on what date the invoice was paid, to make a history of payments.
At first I based fields in the history table on fields in the categories table so that you could simply pick a category from a combobox. I had an after update event on that combobox that also automatically set the 'costs' combobox to the matching price.
Worked fine, but had one snag: if I update the costs of a category in the categories table (e.g. the rent goes up) then all the costs in the history table was also updated because the fields got their info from that table.
So now I no longer have field from the history table based on the other table, and want to use 'set value' to copy values from one table to the other. I'd like the user to be able to somehow select a category with a single click on a button, and getting the info for that category copied. However, how can I get access to know from which record I want the fields copied?
Or is there a completely different way to get a history of payments that works much better?
I'm currently building a bookings database and have encountered an alert message that I cant seem to rectify -
"You cannot add or change a record because a related record is required in the table 'Booking Details'"
Basically - I have a 'Customer Database' form that is linked (via command button) to a 'Booking Details' form. Within 'Booking Details' I have 2 sub forms - 'Booking Quote' and 'Booking Payments'. Both subforms are linked to the 'Booking Details' form by the 'booking ref' field with RI.
I have no problem updating information in the 'Booking Quote' subform, but when I try to add information to 'Booking Payments' it states the above message.
Can anyone please advise as to how I can prevent this happening? I'm slowly losing my mind....!!!
Currently I keep getting this error: "You cannot add or change a record because a related record is required in table"..My current tables are this:
Primary Table with persons info:
Primary Key - Auto number generated Name Address Email Phone
I have 4 other tables with use check boxes.
ex:
Table 1 - Geographic locations visited
ID - Auto generated USA CANADA ASIA ECT...
Table 2 - Languages Spoken ID - Auto generated Spanish Chinese English
Table 3 - Skills ID - Auto generated Hunting Dance Singing Weaving
Is this not a genuine one-to-one relationship table? I mean No two people would have had visited the same places and speak the same language no? I tried to create a one to one relationship with the primary key to the auto generated ID of the child tables but I'm sure that is not how you do it. Also when I try to save the check boxes in my form and I close it and come back it doesnt save and is blank again. Is it because my form gets its information from a query that takes all the information from all the tables.
how I can get this to work properly? Am i to make use of a foreign key? I've read a lot about it online and watched youtube videos but I dont see why I need it here in this case. Is there a way to set the IDs in the child tables to be the ones from the primary table? Or do I have to use a foreign key and manually input the primary ID into them?
Or would it be better to have all these child tables in the primary table and have one large table instead? I just didnt do that because one of them has like 20 checkboxes with cities and locations
I have a problem with my access form, it said "You cannot add or change a record because a related record is required in table". I have attached the access file.
Hi everyone, I am using Access 2007 and I have a database with 2 tables. The original table has a primary key field designated. I have a relationship between that table and a second table and that relationship has "enforce referential integrity" checked.
In the secondary table the field that the relationship is bound to is not a primary key but has the same field properties.
I created a new record in the original table and created the primary key of "T-124". When I attempted to add the same data to the field in the second table, I recieved the following error message: "You cannot add or change a record because a related record is required" in the other table.
I open the very first one (main form). From there, I wrote a little VBA in the 'Add Record' button that if a certain checkbox in that form wasn't checked when I click 'Add Record', it would open up the 2nd form.
The problem is, when I open up the 2nd form and enter info, the info is all put into a new record.
I want the 2nd form's info to go into the same record as the main form. It's all related.
How do I do that?
Note:I built the 2nd and 3rd form from queries that had parameter querying in them...the parameters are frmo the main form.
One lists all the stock symbols and company names = SYMBOL The second table lists the purchase information for each stock = PURCHASE
I then created many queries, etc. using this data. Symbol is the key link between the various tables, queries, etc.
NOW that I understand the lookup wizard in the data type, I would like to change the symbol field in the purchase table to a Lookup field. I, of course, receive a message. I am told to delete the relationship with the other tables. If I remove the relationships and change the data type, can I then replace the relationship with out damaging all the queries and forms?
I have a simple relational database with the proper linking tables, etc. I am normalized through BCNF. I have a table that will track tasking details, however, more than one person is assigned the tasking. How do i add to my form the ability to add additional people to the tasking?
If I drag and drop the name field then it is a one name for one box deal. I want to create a combo box that uses a query to prepoulate multiple elgible names (already built) and then you can select the person you want. Afterwards I want the task assigner to dynamically add additional people to the task with no true limit as the group can be as small as one and as large as thirty.
I attached a small screenshot of the basic table structure. I need to be able to add multiple SME's to the one tasking...
Is it possible to have the control tip show related records from another table?
I've been looking around the internet, and I've seen many examples for showing concatenated fields on current record, but had no luck with what I'm trying to do.
For example.
I have a continuous form, and on it shows top line data. Where a record in this form shows as "Split" it means I have more data related to this record on another table.
Is it possible to show however many fields are related to this record, when I control tip, or mouseover?
I've been playing with
Code: Me.textbox.ControlTipText = Me.textbox
but was wondering, if this is possible, how I'd reference the other table,
If said column of continuous form is "split"... lookup related table by ID number show however many columns of data..
I am currently working on an Access Database that houses our security clearance information. Most of the system is up and running but the most recent form has got me spinning my wheels. I have a Word User Form that users will download and complete, once completed the macros will automatically send us the document to be added to our database. Most of this is working the problem is that this portion of the database has multiple related tables and at any given time a user may require multiple records in the related tables. I have created the code to copy most of the information but am getting stuck adding a new record on the sub-form when multiple items are required. Here is a breakdown of the scenario
Word Doc Table 1 = Basic Organization Info Word Doc Table 2+ = Sites to Visit (There could be more than 1 table added here) Word Doc Table 3+ = People to go on site (this might not be the third table based on user interaction for sites)
So far I can get Table 1 and Table 2 data but if there are more than 1 site I cant seem to get the system to create a new record on the related table it is creating a new record on the main form. Here are the lines I used to try to create the related record..
When I put just the above code on a button it seems to have worked as the sub-form showed an additional record was created but when using this on my macro the sub-form is not taking the focus for some reason.
I have 2 tables. 1- customers table with 2 fields : customername,customerno 2-conversationstable with 4 fields: date,customername,customerno,details
The conversations table is for keeping memo of telephone conversations with the customers.
I built a simple form deriving from the conversations table. And added to it a combobox with 2 columns from customers table to select the customername an customerno for the form.
While deleting the record in the conversations table,through the form, I saw that the customername and customerno in the customers table of that particular customer record are deleted also. I made no links between both tables.
I am new to access 2010. I need to change the primary key in a table ("stations", Primary key is "station number"), because future entries will result in double entries for this primary key.
I have another table ("species&stations") which has records of Species for each "station number".
So I created a new Primary key for the "stations" table, now called "species id", being a bit better in defining a unique station (as it contains the year and the species number, i.e. "451_2010")
Now the table "species&stations" references/(is in relationship with) the old primary key, identifying a station number for each record.
How do I get it to recognise the new primary key from the "stations" table, and keeping the records (over 1000...) with all there info.
Approach so far: I tried to create a new field in "species&stations", which should look up the new primary key from "stations" and then autofill the field. i did not manage this though
I attached a screenshot to make the relationships more clear!
Many sessions can have many employees - thus the joining table has been included.
When trying to delete an employee from the database using a form, I encounter the error:
The record cannot be deleted or changed because table 'tblEmployeeSessions' includes related records
Is there a problem with my table relationship structure? Or is it 'correct' that as the employee is supervising a session he/she cannot be deleted as this would interfere and maybe mess up the session record?
I would like to create a report that would really impress my supervisors, i just started at the company. I'm trying to create a call action plan, so i'm recording clients information on one table, and meetings we have had with each respective client on another table. Some clients will have multiple meetings, some few, and some none. I have a relationship set between them from the client's id number on the client table to the ClientID on the meetings table. one to many.
When I go to create the report, only the clients with meetings show up on the report, I would like client info to always show up on the report and meeting info to only show up under each respective client when it exists. I have worked out how to shrink and hide any text box without any info on it. It just seems like the existence of a meeting dictates where the client will show up at all in the report.
I have a table TO-det and another table DO-DET.The table DO-det will have details about all DO for each TOID record.Both have a common field name TOID The tables are related under ONE-MANY relationship.One TO-DET record can have many DO-DET record
Now I wanted to create a form where if i add a new record to TOID i must also be able to add data for DO-DET for that corresponding TOID.
In my database I have a table that keeps track of a package of items. The package is assigned a package type (counter display, end cap, half pallet, full pallet for example). The record of the association of the package and it's type is held in the main table.
Each of these package types is either a case or a pallet (counter display and end cap are cases and half and full pallets are pallets) This relationship is kept in another table (we will call it description table).
Now, based on the type of package and therefore it being a case or pallet a UPC and a GTIN number are assigned. The GTIN number is different if it is a case or is a pallet. I have a table that stores all of the UPC and GTIN numbers available in 3 columns, one for UPC, one for GTIN Case and one for GTIN Pallet (the UPC is a standard 12 digit and the GTINs are 14 digit -with the first 2 different to designate pallet or case. and all are based on the check digit formula necessary)
The user assigns the UPC and correct GTIN number by clicking a button which applies the next available UPC code to the package and determines if the description of the type (case or pallet) and inserts correct GTIN number into that field. I actually have all of this functioning correctly.
Now the problem. If a user changes the package type, and therefore changes the description, I need to add code to the update event of the combo box that gives the choices for package type that does the following:
Check to see if the original package type was a case or pallet (it's description) and if by changing the package type it is now changed to the other, update the record in the main table to the correct GTIN number based on the existing UPC Code.
OR as I write this, maybe the code could simply update the main table with the correct GTIN code based on the new description and the existing UPC code. This was I would not need to check for a change just do the update every time.
OK, your gonna have to bare with me a little bit as its hard to explain and if any VB is given please add a few annotations as I have to explain everything i do in a report (doest have to be too detailed, just to make the code understandable :) ) and if it needs better clarification feel free to ask :), but basically, I have the following relationship set up:
At the moment, because of the way it is set up, I cannot create a record in the transactions table unless an income record is given for it (because tb_income (one) to tbl_transactions (many)) but the way I want to work is as follows:
If you have a look at the tables tbl_transactions and tbl_income and their link. The way I want the system to work is when a new transaction is made, a new income record in the "tbl_income" table would be made with the date (in tbl_income) being the date at that particular time and all transactions created on the same date would all go in the subdatasheet for that one record created for that date; and if another transaction is made on an alternate date (say 00:00am of the next day) another income record would be created automatically with the date being of that particular day etc.
My other problem im facing is that everytime there is a transaction created, I want the stock level(s) field of products in that particular transaction to be decreased by the quantity purchased of that product but i have no idea how to do so
I need help. I am not sure if this is a form issue or a logic issue i have a db for tracking students the classes they take and their notetakers for classes. Each class is most likely unique to each student but sometime there are multiple students in each class that need a notetaker and there should only be one notetaker per class. I have 3 tables and they are all linked through a unique iD called CRN (number).
I am looking for a way to add a student to a class and create a class at the same time in one form. I am trying to limit the redunancy by adding a class each time and then adding a student to the class.
Any suggestions would be great. I have gone through 10+ redesign and am just at a loss on how to accomplish this.
