Forms :: Getting Total Of A Field In Continuous Form
May 4, 2015
I have three tables (Group, Customer, Savings).
Every member of a group do savings once every 15 days and each group has maximum 20 members, group has one to many relationship with customer and customer having one to many relationship with Savings (there is no direct relationship between group and savings) i have created a continuous form for saving entry. in this form i select a group which is unbound and based on that group, its members are listed in the combo box named CusID, after selecting customer other saving details are entered.
What I want, is that for every group i want a total saving for all that specific group's members selected in the mentioned unbound combo box in that continuous form, this total should be based on the group selected in the mentioned unbound combo box, in case i select another group the total should also be based on newly selected group.
View Replies
ADVERTISEMENT
Apr 6, 2013
I have a form that is displayed continuously and there is a text field in it (Text12).In the footer of this form I would like to add a textbox that is the sum of all Text12's on the form.I tried =Sum([Text12]) in the textboxes control source but that is just displaying an error when I run the form.
View 2 Replies
View Related
Sep 8, 2014
I'm adding to a DB which has been working well for a while.
I have a continuous form which has a query behind it. The query takes two values: (For example)
[LineCost] and [LineQTY]
Inside the query, we use the expression TLC: [LineCost] * [LineQTY]
I need to sum this so a Sale with several lines gives me the total sell and cost value.
If you look at the sfrmEditQuote - you'll see the exact same method - working. sfrmEditSale is direct copy of this form, with some changes here and there. But can I get past the dreaded #error? Nope.
I've tried renaming the fields and text boxes, checking the query, but I keep getting #error on the sfrmEditSale form footer.
I have attached the DBs in old and new format.
View 14 Replies
View Related
Dec 17, 2014
I have a continuous form with a number of unbound fields and bound fields. However, I would like to sum an unbound fields (Text28). Text28 is an unbound calculated field based on another calculated unbound field (Text22). I would like to sum Text28 in the footer or somewhere in the form.
Here are the codes for my field:
Code:
Text28 = iff([Text22>0], [Text22], [Text20] --- This works
Text29 =sum(iff([Text22>0], [Text22], [Text20]) --- this is not working
and it did not work.
View 3 Replies
View Related
Jul 15, 2015
=([frmservices_2013].[Form]![sub2013])
I have this expression in a field on a form. It's been a really long time since I worked in Access. Is sub2013 a field on a form, in a table?
It's doing a running total of a field from a form. I can't find a subform with this name, or a field anywhere, I'm drawing a blank.
using Access 2007....
View 4 Replies
View Related
Jun 1, 2015
Access 2002 . Can I condition a field to 'locked' on just one record of a continuous form subfile, based on the contents of a 2nd field in same record?
View 14 Replies
View Related
Jun 12, 2013
I have a form listing tasks to which I make personnel assignments with a multi-value list field type. It takes some time to select from 15-25 employees on the list for each task, especially considering that small groups of employees will be assigned to the same selection of tasks.
What I want to do is select multiple records with the mouse, then click a command button opening a form in dialog mode with the selection list. The user then clicks to make his selections and clicks ok, which then updates the multi-select field for the selected records.
View 1 Replies
View Related
Jul 28, 2014
in a continuous form i want to click on one record and have the one field change the background colour to highlight it. When I use the code: Field. BackColor = vbYellow it changes the background on all the records. Is there a code to say only for the record with focus?
View 1 Replies
View Related
Jun 16, 2015
I wanted to take the values from the frmInvoiveItems' [LineTotal] field, subtotal all of them for a given invoice ([InvoiceApplied]), and place them in a new field under frmInvoiceInfo that I haven't created yet.
(I.E. I have three different items under frmInvoiceItems for one invoice. They all have a different price. I want to add all of their prices together, and display them in a "Total" field in the frmInvoiceInfo table. This new "Total" field should be the total amount due minus the "Deposit" value and anything in tblTransactions [I still have to figure out how to assemble that too... another question for another time]).
Is all of this possible without me having to store the information in a query? How?
View 11 Replies
View Related
Sep 1, 2013
In my database main form with subform. subform have query as recordsource.total of one of field in subform shown on main form. all is ok and show total correctly but when subform have no records then total field on main form shows #error. How to convert this value either into null string or zero(0).
View 2 Replies
View Related
Jul 22, 2013
I have a continuous sub form linked to a master form. The sub form contains fields such as [date], [increase], [lastdateincrease], [task], and multiple other fields. The sub form can have one record or multiple records linked to the master form.
Each sub form record represents a service, monthly cost, and a price increase amount. I'd like to be able to enter data in two fields and have this data populate any remaining records, or for that matter, new records that I had to the sub form.
The fields that I would like to have populate are [date] and [increase].
When I enter the [date] and [increase] in the first record, I'd like all remaining records in the sub form to update with the [date] and [increase] amount automatically.
View 3 Replies
View Related
Oct 22, 2013
I've tried many things (compact and repair, Nz(,0), sum()) and I can't get it to work.
I entered =[field1]+[field2] but it behaves like if I had entered =[Field1] & [Field2].
Yes instead of adding the numbers it just puts them together.
For example: Field1=3 and Field2=5 instead of field3=8 it shows Field3=35.
View 3 Replies
View Related
Aug 17, 2015
I'm trying to set up a sum field in the footer of a continuous forms form but I'm stuck on the code. The field is amount and I need the sum field to show the total of all the records on the form.
View 5 Replies
View Related
Jun 24, 2015
I have a continuous subform with an unbound Concat textbox and would like to populate another field for each record with the results with a main form button onClick event.
How do I accomplish this?
View 2 Replies
View Related
Sep 14, 2007
I have to count the number of records in a subform that meet certain criteria. I have a yes/no field and presently have a field in the subforms footer that =Count(*) and I would like to be able to count only the "Yes" records. Is there a way to use the count function to do this.
View 4 Replies
View Related
May 29, 2015
I have a bound continuous tabular form,However, based on data content in one field of a record, I want a checkbox in the same record enabled, so the user can check it if necessary. I have created a record set using the form as shown below, and I am looping through each record. To show that my code is referring to the field with required data content, I display it as a message box and it works, yet my checkbox does not enable.
I have the code in the form_load event, however, for testing purposes I have it behind a button.If I am seeing this properly, the code behind the button enables the checkbox for ALL records once the criteria in the required field is true, and based on the last record, which has no data content, it disables the checkbox in ALL records. I also have the PK ID for each record hidden in the form. Can I utilize that to target the checkbox of each individual record??
Form Detail
-Form does not allow additions or deletions. Edits allowed
-All fields are disabled and locked
-I only want the check box to unlock if data is found in the "RequiredField" as referred to below. I have also tried if not isNull(requiredfield.value) then -enable checkbox, which yields the same results
Here is my code
Code:
Dim rstMyForm As DAO.Recordset
Set rstMyForm = Forms!MyForm.Form.Recordset
rstMyForm.MoveFirst
Do While Not rstMyForm.EOF
If Not RequiredField.Value = "" Then
[code]...
View 14 Replies
View Related
Dec 7, 2006
I have two forms (made from two tables)
The tables are tblplans and tblplancontrol. tblplancontrol is the many end and
the foreign key is 'PlanID'
The first form that you open is the plans form. Here you complete data about the plan, i.e planID (which is unique as its the name of the plan), author and date. From here you then open the plancontrol form which is a continous form. You can select which people you want to recieve a copy of the form - the link back is the plan id.
What i want to do is make sure that each time you start a new record that the planid is automatically populated from the still open plans form.
I assume this is done through code but cant quite get the right one. It must be done before i finish each record otherwsie i will get an error.
Any help is much appreciated.
Thanks
Kevin
View 2 Replies
View Related
Mar 31, 2014
I have a form that is being used for sample submission. Ideally, the user will be able to put in some information (3 or 4 fields) and the number of samples that they're taking, click the arrow and it will insert that number of samples into a temporary table that is then displayed on a continuous form. From there, they can edit samples, add more samples, and generate a report to submit to the genotyping group. Once their sample list is final, I will append it to the master list and clear the temporary table.
I've got the basics working. A looped "INSERT INTO" using a counter inserts the relevant information. I cannot, however, seem to get the numbering field to work.
Ultimately, the numbers need to look something like MySample-001, where MySample would be one of the other fields. Incrementing the 001 is the problem. In another situation in the database, I can successfully use DMax+1 to assign a single number on a single form, but I can't get it to increment the sample numbers.
Ideally, I'd like it to happen when the form is generated. However, I'm also open to having them assigned when the sample list is finalized, before inserting into master table.
View 8 Replies
View Related
Aug 25, 2014
I have a form that requires at least a transaction code (from a combo box) and a total value field (numeric) to be entered.I have used the following code but when I click OK on the message box the form is closed.I want it to remain open so the user can enter the fields and properly save the record. As the code is in the Before Update event it does the same thing if I have Cancel = true.
Private Sub Form_BeforeUpdate(Cancel As Integer)
' Check to make sure the TransCode has been selected and the total field doesn't = zero
'If Me.cboName.ListIndex = -1 Then
' MsgBox "A value is required for ...."
' Me.cboName.SetFocus
' Cancel = True
[code]....
View 4 Replies
View Related
Jul 23, 2013
I want to use buttons on a form to change the sort order on a continuous form. In the buttons click event I am using a public function (named Sort_1) to change the sort order. The first element of the event call is the name of a generic query (named Sort_1_Query1) and the query field to sort (LAST_NAME OR FRIST_NAME, depending on the button.)This is the Click Statement.
=Sort_1("Sort_1_Query1","LAST_NAME")
This is the Public Function
Public Function Sort_1(SortName As String, FieldName1 As String)
DoCmd.ApplyFilter SortName, FieldName1 & "between 'A' and 'Z'"
End Function
I think the problem is in the use of quotation marks or trying to pass the query field name to the Do Command or the use of an ampersand.
View 4 Replies
View Related
Jul 30, 2014
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA"
id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR"
id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
1)
DoCmd.OpenForm "GASTOS_EDITAR", acNormal, , "[editar_id] = " & Me.Gastid
2)
DoCmd.OpenForm "GASTOS_EDITAR", , , "[editar_id]=" & Me.Gastid
3)
stLinkCriteria = "[editar_id]=" & Me![Gastid]
DoCmd.OpenForm "GASTOS_EDITAR", , , stLinkCriteria
4)
Private Sub btn_editgs_Click()
On Error GoTo btn_editgs_Click_Err
Dim strWhere As String
strWhere = "[editar_id] = " & Me.Gastid
DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere
btn_editgs_Click_Exit:
Exit Sub
btn_editgs_Click_Err:
MsgBox Error$
Resume btn_editgs_Click_Exit
End Sub
View 9 Replies
View Related
Oct 4, 2013
I have a continuous form that displays all my customers .I want to be able to dble click a customers ID and go to there customer details form.
View 14 Replies
View Related
Aug 22, 2014
How to populate the parent form's PK to multiple records in a child subform set to a default view continuous form?
In other words, how to auto populate the primary key to multiple records displayed the subform?
View 5 Replies
View Related
Jan 9, 2014
I have a continuous subform which queries a table of attachments. I'm using Access 2007 but not using the Attachment datatype; this DB will grow considerably and I don't want to waste precious space by filling it with bulky files. So instead, I have code which makes a copy of the attachment and adds the hyperlink (to the copy) to the table instead.
Now - I want to add a control to the subform to display an icon / image reflecting the file type of the attachment (Word doc, Excel s/s, PDF etc.)
But not sure how to go about it.
I was thinking I could use FileSystemObject.GetFileExtension at the point in the code where the attachment is added, and add a new field to my attachments table (i.e. translate "*.xls*" to "Excel", etc.) Then store / embed a handful of images for the core types I would expect and use an image control on the subform to display the image based on the value of that field.
But is that even possible / feasible?
Or, is there a handy API which can retrieve the icon associated with a file type based on what has been installed on the local machine (even if there is, there's still the problem of setting up the image control to display the appropriate icon specific to each record...)
Or, is there another control available which would be better suited to something like this than an Image control?
View 4 Replies
View Related
Aug 8, 2013
I have two fields on the main form and I need a total count of records between the value of the two and then enter the total in a bound field on the main form
View 1 Replies
View Related
Jul 19, 2013
I have a continuous form sfrmAddress which is based on my table tblAddressList. What I am trying to achieve concerns the date fields DateFrom and DateTo.
DateFrom is a bound text box txtDateFrom
I am trying to put an IIf function in the Control Source of unbound text box txtDateTo
=IIf([txtDateFrom]=[qryAddressHistory1]![LatestFromDate],Date(),[tblAddressList]![DateTo])
qryAddressHistory1 returns the LatestFromDate , so the most recent address.
The idea being if it is their most recent address, they have lived there until today, if it is not their most recent address it will display the date contained in the table (when they moved out or DateTo).
I have tried this a few different ways, double and triple checked my references and I'm usually OK with IIf so I don't understand where it's going wrong!
I should add I'm getting the #Name? error all the way down the column when I open the form.
View 3 Replies
View Related
