Forms :: Hiding / Unhiding Tab Controls Based On Combo Box Selection
Oct 16, 2013
I have frmIncident that has a 2-column combo box (cmbIncidentType). Column (0) is IncidentType, Column (1) is YES/NO. This combo box feeds from a Query and currently has about 15 "types" of which 4 have a "Yes" tied to them, then rest "No".There are situated on a TabControl (tabIncident) with 5 sheet tabs. If the Incident Type selected in the Combo Box has a corresponding "Yes" in Column (1) then all 5 sheet tabs need to be visible. If it is "No", then only three of the five are visible. Here it he current code I am using for the AfterUpdate event on the combo box:
Private Sub cmbIncidentType1_AfterUpdate()
If Me.cmbIncidentType1.Column(1) = "Yes" Then
pgEmerIncidentRpt.visible = True
pgNarrClose.visible = True
Else
[code]...
When I open the form is will set the proper sheet tabs that need to be visible, however once I cycle to the next record, or select a different Incident Type, even one with a "YES' in column (1), it will only show the (3) sheet tabs. I can never get it to show all 5.
In the code, the only (2) sheet tabs that need to visible = true or visible = false are shown, starting with "pg".
View Replies
ADVERTISEMENT
Jan 28, 2014
I have a form which has a combobox where the user selects a record from another table,I want to hide the forms fields [managercontact] and [managertelno] depending on the value of the combobox (manager) from the table details, but its not the value shown in the combobox its the value of another field [type] from the same table called details. Its one of two values being 'conc' or 'ob'.
View 2 Replies
View Related
Sep 15, 2013
I have tab control form with (5) tabs. For this discussion - Tabs 1 through 5. For a blank (new) form sheet tabs 4 & 5 need to be hidden. Based on what is selected via the drop down box (on tab 1) then tabs 4 & 5 may remain hidden or needed to be un-hidden. Example: [DropDown1]
Selection 1: stay hidden
Selection 2: unhide
Selection 3: unhide
Selection 4: stay hidden
Selection 5: unhide
Selection 6: stay hidden
Selection 7: unhide
Selection 8: stay hidden
Selection 9: stay hidden
I think one I figure this out then I can use the 'OnCurrent' event to check the drop down selection as a user selects the a record or scrolls through records.
View 2 Replies
View Related
Nov 6, 2013
I have created a form with some boxes on it which include in their body textboxes and labels and combos. I would like to know if it is possible (or if a control exist) to group this items which are inside the box and with a simple box.visible = false to make them all non visible without tagging them or adding code with their names statically to make them non visible. Any link that shows how to move controls in the form in runtime?
I would like to hide some controls and make smaller the form and if user selects a checkbox to show these controls that exist inside a box and grow the form.
View 1 Replies
View Related
Nov 29, 2014
I'm trying to build a database for daily work. My work in daily basis I have to fill all condition for several items.
We have two areas, with two locations under each area, and three systems under each location and each system contain more than 500 items.
I created all tables and fill by all information:
1-Table 1: Area 1, Area 2, Area 3, Area 4, Area 5, Area 6.
2-Table 2: Location 1, Location 2.
3-Table 3: System 1, System 2, System 3.
4-Table 4: all items under System 1-1-1
5-Table 4: all items under System 1-1-2
[Code] ....
Last table will be LogBook which will be as follow:
date l time l area l location l system l item l Conition1 l Conition2 l Conition3
My question regarding to the form of the above table:
How can I make a combo box for area field and when I select for example area1 will appear only the locations which under area1 in location field, and when I select location1 for example will appear only the systems under location1 in system field, and when I select system1 one for example will appear only items under system 1.Combo box list will be based on the selection in previous combo box and so on.
View 3 Replies
View Related
Dec 31, 2014
I am trying to auto populate the text boxes in the form based on drop down from the combo box. As you can see in the form Frm_Input, this works fine for FL, but for some reason it will not populate for Skill, Role, FLM and Location. The table it is linking to is Tbl_Names. Why as I have changed the column source?
View 8 Replies
View Related
Jan 29, 2014
I am struggling to pull out a report based on the combo box selection. I have NOI database and want to pull out a report for a specific customer that how many NOIs are generated by this customer..
I have a separate table of customer and another table of NCRs and the customer information comes from customer table.
I have tried the below statement but gives me an error message:
code for Macro that pulls the report in click event:
[CustomerName]=[forms]![CustName]![combocust1]
do i need to mention the report as well in some where in report ?
View 14 Replies
View Related
Mar 17, 2014
I have two forms linked together.
frmMaterialRequest
MaterialRequest
Status
frmHandledBy
MaterialRequest
HandledBy
What I want is to meet the following:
- Form 2 to be locked but its "MaterialRequest" is enabled.
- HandledBy to be unlocked if the MaterialRequest meets the "Status" of "frmMaterialRequest" which is "Approved".
View 9 Replies
View Related
May 26, 2013
I have "donations" form with a cbo called "DonationType".
(frmDonations.DonationType)
General
Employee Match
Employer Match
Angels*
Friends*
Royal Crown*
The last three options need to redirect the user to a different form used for pledged donations.
View 2 Replies
View Related
Jun 6, 2014
I am having issues with my combo box populating values based on the selection from another combo box.
Database : contains 2 tables: Staff_List, Level_Type and a form called frm_Test
The first combobox cboLevel gets its value from the Level_Type table with the select statement SELECT [Level_Type].[ID], [Level_Type].[Level_Type] FROM level_Type;
The values to be displayed on the second combobox cbo_Name is expected to be dependent on the Level selection made from the first combobox i.e if Level 1 is selected in cboLevel then only Names of people in Level 1 will be displayed in second combobox.
The select statement I put there is SELECT Staff_List.ID, Staff_List.Staff_Name
FROM Staff_List
WHERE ((([Staff_List]![Level])=[Forms]![frm_test]![cboLevel]));
This is not displaying anything in the second combobox after I tried it in the Form view, just empty.
View 3 Replies
View Related
Jun 21, 2015
I have been looking some information on changing image based on form combo box selection on form.
I manage to do case by case but i need it in a simple code because their will be many employees just to avoid adding case by case code for each one.
Private Sub Emp_IDCombo_AfterUpdate()
Select Case Emp_IDCombo.Value
Case "AM-001"
Imageholder.Picture = "C:UsersAMGDesktopam-001.jpg"
Case "AM-002"
Imageholder.Picture = "C:UsersAMGOne DocumentsHR & Admin DatabaseEmployee Picturesam-002.jpg"
End Select
I have employees table where all images location is saved in text field and i have a combo box on form which is employee id.
Tables relationship
Employees_table [PK] to Contracts_table [FK] via field name {emp_ID}
Fields Name
Combo Box name on form Emp_IDCombo and row source is SELECT Employees_table.Emp_ID, Employees_table.EmployeeName, Employees_table.Emp_Pics FROM Employees_table;
Text field is located in employees_table called [Emp_Pic] for images location.
View 10 Replies
View Related
May 24, 2013
I have two tables: tblWeightTickets and tblWasteType.
I want to create a form: frmWeightTickets, where a user can enter information and the data is stored in tblWeightTickets.
There are two fields in particular that I am working on ... "WasteType" and "Rate".
On the form, I want "WasteType" to be a combobox "cboWasteType" and when I select a type of waste I want the "Rate" textbox on the same form to auto populate with the rate amount for that particular type of waste (i.e. recycling, garbage, etc).
The Rate amount is located in the table: tblWasteType under the field name "Rate". How can I do this and at the same time store the information in the tblWeightTickets? I already have the combo box loaded with the types of waste - I just need it to populate the rate text box and store it in the Weight Tickets table.
View 11 Replies
View Related
Jul 13, 2013
I'm working on a wine database (for ages now...). I'm currently struggling getting the following to work. I have a form in which one can select the name and vintage of a wine using a combo box, after which also a picture will be shown of that wine. I have the pictures as attachments in a table. One can then press a button to close this form and go to another form in which one can edit all the details of the selected wine. Problem: I can't get the picture to show.
I have a reasonably simple form with a combo box, a text box, a button and an attachment field in which a picture should show.
I made a query to select the id, name and vintage from the wine table. I couldn't select the attachment field for the pic in the wizard, so I added that myself in the Design View. The Query for the combo box now reads:
Code:
SELECT Wijn.Id, Wijn.Naam, Wijn.Vintage, Wijn.Plaatje FROM Wijn ORDER BY Wijn.[Naam], Wijn.[Vintage];
(translation: Naam = name | Plaatje = picture)
It neatly shows name and vintage in the drop down list. Once selected it only shows the name of the wine in the combo box and I use VBA to fill the Text Box with the vintage of the selected wine. The VBA I use is:
Code:
Private Sub cmbNaamWijn_Change()
Me.txtVintage.Value = Me.cmbNaamWijn.Column(2)
End Sub
All works fine. Also when I pres the button, the wine I selected opens up and can be editted and the select form nicely closes. The only problem is the fact that I cannot get the picture to show!
I inserted an attachment field with the name: attImage. In the VBA code I added the line:
Code:
Me.attImage.Picture = Me.cmbNaamWijn.Column(3)
Doesn't work. With debugging I do see it gets the correct value form the table. I get an error message stating "Method or data member not found", so Picture is not available for the attachment object I guess. If I look at what is available, I can't select anything useful. So my next try was adding an image control with the name: ImageWine and the VBA code in the On Change property
Code:
Me.ImageWine.Picture = Me.cmbNaamWijn.Column(3)
results in the following: Run-time error '2220'. Microsoft Access can't open the file '[FilenamePicture]'. Logical in a way I guess, since there's no path in there. I also tried the Bound Object Frame, but that resulted in the same problem as the attachment try described above.
View 1 Replies
View Related
Jun 17, 2015
im trying to enable/disable checkboxes based on a combobox selection for instance,
i make the selection in a combo box called terms and conditions. i want it then to only enable the business,domestic and summary check boxes for that type, with the onther check boxes staying disabled. is there a way this can be done through code like the statement "only enable if this letter type selection has been selected"
View 14 Replies
View Related
Mar 11, 2015
I'm creating a form that when the user selects the following categories in the same combo box (Date Received, Date Reviewed, Date kitted, In Work, Complete) it auto populates dates in the respective fields. As I mentioned, it's only one combo box. The dates will be spread out, so the user will change the combo box selection based on when these events occur. I already have a field for each category both on the table and form. Also, I do have multiple tables for other parts of data, but these categories all fall into the same table.
View 8 Replies
View Related
Mar 31, 2015
I want to create a text box within a form that automatically populates a contact number based on a selection from a combo box, also in the same form.
For example, I have a Bidders Table (tblTenders), this form includes information regarding the Tendor like the company name and a main contact within that company and a phone number for that contact.
I've created a separate table for all the contacts called tblContacts. This table holds all the contact information for each contact. I have a simple form called frmTenders that asks the user to input the Customer (which is the company who are bidding) and the Main Contact, which is a combo box to select the main contact from tblContacts. Below that combo box is a text box called 'Contact Number' - I want this box to display the contact number for the main contact automatically when a main contact is selected from the combo box.
The contact number text box isn't storing that information in any tables etc. It's just for viewing purposes when we need to make a call to that specific tender.
View 5 Replies
View Related
Oct 20, 2005
Hi everyone,
I have two combo boxes on the same form bound to a table. I want the contents of the next combo box to change based on the previous combo selection e.g
cboContinent cboCountry
Africa Zambia
Africa Congo
Africa South africa
Europe England
Europe Holland
If I choose Africa in cboContinent, I want to see only Zambia, South Africa and Congo under cboCountry and if I choose Europe I want to see only England and Holland
Thanks
Humphrey
View 1 Replies
View Related
Jul 11, 2012
I'm have quite a difficult time getting a form in Access 2010 to perform the way I would like it to. I have multiple tables that I've created, and a query that contains the data from the various tables. I then ran the form wizard to select the data from the query that I wanted to populate in my form and I've added 2 combo boxes.
What I want to do:
1. I want users to be able to select a category in combo box #1 (example: "Bag")
2. I want users to be able to select a detail in combo box #2 based on the category they selected in combo box #1 (example: Combo box #1, "bag" would populate the following selections for combo box #2: "sandwich" and "tool")
3. I want users to then receive a list of suppliers that provide the product they have selected, either "Bag: Sandwich" or "Bag: Tool"
I have combo box #1 populating a list of categories already. However, I am not able to get combo box #2 to provide choices based on the selection chosen for combo box #1.
View 1 Replies
View Related
Jan 22, 2005
I know this was mentioned and dealt with in another post, but I can't seem to find it.
Basically, I have a couple of text boxes that I would like to hide, unless told to be visible by a command button.
I'm trying to do this to save space on the form.
Someone a while back had mentioned setting the height of the control to zero and also setting the control to canGrow.
I tried this on a particular field and it didn't seem to work.
Any ideas would be a total help. Thanks all.
View 5 Replies
View Related
Feb 6, 2013
I have a form, with a subform and another subform
Once a supplier name is selected from the combo box i only want it displayed that suppliers products in the subform, subform. (products combo box) I can get a basic query to show these results but can get the combo box to do the same.
The design screen is also attached below ....
View 14 Replies
View Related
Jun 13, 2013
I search around online and did come across much info on code to how to hide fields. But, the problem is I cant seem to find a way to hide a certain amount of fields based on a number amount.
example: Lets say I have a 12 text fields to show 12 months of monthly payments, and lets say a client only has a 3 payment term. How can I list 3 under installment field and have remaining 9 fields auto hide since they wont be necessary? this way I only see what applies and not additional text fields.
View 1 Replies
View Related
Sep 15, 2005
Is it possible to hide text boxes/controls on forms dependant on the user ? I have a had a (quick) look at access security and it appears that it just enables read/write access to objects not controls on the objects.
Many Thanks in anticipation
Dave Smith
View 1 Replies
View Related
Jan 27, 2006
Right, I think this is a quick and easy one....just not for me!
I have a combo box with a list of names. I want to use whichever name a user selects as criteria for a query.
What do I need to type in the query criteria box or as SQL?
View 2 Replies
View Related
Jan 19, 2006
I choose a ‘Year’ from a combo box. Why doesn’t the data in my textbox update? (It’s a count of records for that year)
View 2 Replies
View Related
Jul 29, 2012
if it is possible whereby if a user makes a selection in combobox 1 it must automatically generate the given vaules in combobox2 from the selection in combobox 1.
View 1 Replies
View Related
Oct 18, 2011
I know how to assign an event to a combo box, but I want to be able to launch a specific link, app, or email template, based on the actual selection from the combo box. So when I make a selection, whatever program or event I assign, to that specific selection, will launch.
View 14 Replies
View Related
