Forms :: How To Switch To Correct Record When Switching Forms
May 7, 2013
I have a form called "Customer Details", on that form i have child forms, including one that has a schedule on.. so far everything seems fine, am able to get it to pull data correctly to the correct fields.. etc
I'm using 1 main table for all of this called "Cases"
Now the problem is, when i i click a button to print (this works so far), it opens another form and then fills in all the textbox's, however this is where i've got the problem, as it always seems to pull the data from the first record, not the record that i'm currently on..
so for example, if in the customer details, someone looks up "joe Blogs" using the navigation search and then wants to print it, by hitting the print button .. it should open another form, fill in the boxs and print "Joe Blogs", however it's always doing "Joe adams" - 1st Record
In the following code to add an article to a purchase order line table and then open the form on the purchase order in question , I had to open the window "frmPurchase" twice in succession. If I omit the first docmd.openform statement, the form would open at the first record in the table, not the one defined in the where clause "PUOpen and PUCompID = " & Me.lstCompany.
I had noticed previously that, when the form "frmPurchase" was already open, Access went to the correct record, and not if the calling program had to open the window, which is why I came up with the idea of replicating this behavior in the code.
With rstC .FindLast "PULineNB <> 0 AND PuLineHeadingID = " & rstB!PUID If Not .NoMatch Then linenb = rstC!PULineNb Else linenb = 0
[Code] ...
Is this normal behavior, and if not, how can I improve the code?
I have a tabbed form built in Access 2007. It's a series of about 32 different questions, with some being fill-in, some drop down boxes to select from, some radio buttons to choose a rating from 1 to 5. The reason I used a tabbed form was just to keep things consolidated on one screen where no scrolling was involved. All of the entries on each of these tabs are deposited into the same single table. I have 7 tabs, and all of the fields on the 7 tabs compose a single record in the table.
I have the actual tabs hidden, and instead use a button to switch to the next tab (Continue button at the bottom) once all the fields on that tab have been completed. I have all of the necessary fields set to be required, but Access does not validate the entries until the very end of the survey when they click a 'submit' button that actually saves the responses and returns to the opening splash page to start the survey again.
What I want to happen is for the fields on the current tab to be validated before it lets the user move to the next tab with the continue button. If they click continue and have left any fields blank they should get a message that all required fields must be completed or something similar to that.
I have found a thread here entitled "Form Validation before Moving to another Tab" which sounds similar to what I'm doing, but using the button method to navigate to the next tab, there is no BeforeUpdated event to assign that code to.
I have a form with a TAB control and four pages. Each control of each page has his TAB index set correctly (starting from 0 to n), some of controls are not enabled to be tabbed. The form's cycle is set on "Current page".
I have two kind of problems.
First: I am on the last control of the page, pressing TAB key the focus gets invisible. Press TAB key again and the focus moves on the first page's control. For each page happens this behaviour.
Second: clicking randomly on the TAB pages the focus is not always on the control with TAB index 0, but usually on the last.
I have read that clicking on a new page the focus should be automatically on the first control, but this does not happen in my experience.
Access 2013 on Windows 7 ..I have a Main Switchboard form which is Pop-up and Modal. Everything on it is working as required, but if I am in Design View and try to switch directly to Form view, the form disappears and the Access screen freezes - the mouse moves, but no menus or objects can be selected. If I have the VBA window open, I can carry on working in it, saving the modules and closing that window as usual. But the only way to open a form or do anything else in the main screen is to kill Access by closing the Access window in the system tray (or using the Task Manager).
If I close the Switchboard when in Design view and then open it in Form view, everything's fine.
The only recent change I can think of is upgrading from a 32-bit implementation of Access to 64-bit.
You know on forms, you have those little Left and Right arrows (< >) at the bottom of the form, and you can click on them to switch between records... yeah?
Well, how can I make the form switch between records with VB. Lets say I want a VB script that jumps to the 5th record in the table, how would I do that? Normally you would just click the Left arrow 5 times... but I want to do it with code.
Is it possible to create a VBA on the AfterUpdate() that flips a value based on a condition?
For example, if in a text box (Gender) there is a value of "Male" and in a combo1309 the value is "No", can Gender be switched to "Female" automatically?
I would like to create a command button on the header of a form. The button should perform a toggle switch: click once to activate the task and click it again returning original state. I can create the command button to perform a task but do not know how to return to original state. The button should have indicator showing which state is in.
I use the switchboard wizard to set up a switchboard. At the moment my main switchboard has 3 items and they are all set to 'open form in add mode' and they all point to the same form at the moment (which does exist).
When I try to go to form view of the switchboard I get the error 'The control name label1 is misspelled or refers to a control that doesn't exist'. Behind it I can see the form in form view and I can see there are the 3 menu items I would expect but when I close the error dialogue and the following 'close macros' dialogue' it goes back to design view. In design view I can only see one menu item (which seems to be a text box rather than a label) instead of 3. I changed it to a label but it didn't work.
You know how there's MoveFirst, MoveLast, MoveNext, and MovePrevious to go to a recordset and make changes? Well, I just want to make changes to one recordset, and that would be the one I would be currently working on. That way I don't have to run the program for every single record everytime I want to modify one thing for one record. Is there something like a MoveCurrentRecord? Thanks =)
For entering ordered products there is a combo box for Product_ID which is displaying information about available products, their stock level, and price.
The Row source for Product_ID looks like this:
Code: SELECT DISTINCTROW [qryStock4Orders].[Product_ID], [qryStock4Orders].[Product_name], [qryStock4Orders].[Available_quantity], [qryStock4Orders].[Selling_price] FROM qryStock4Orders ORDER BY [qryStock4Orders].[Product_name];
qryStock4Orders holds the calculated values of stock level (Available_quantity) for each product, grouped by Product_ID and Selling_Price. Selling_Price is from tblX.
Because I can buy one product from different suppliers (for different purchase prices) and purchase prices (so selling prices too) of the same product may vary over time, qryStock4Orders may list more then 1 available Selling_Price for that product, for example:
What I want to achieve is to turn this code placed on After Update event of Product_ID combo box
Code: Dim strFilter As String strFilter = "Product_ID = " & Me!Product_ID Me!Product_Price = DLookup("Selling_Price", "tblX", strFilter)
in something usable, in order to save into tblOrderDetails the selected Selling_Price and not one random Selling_Price from the 3 available above.
As the stock level is updated only after Ordered_Quantity and Product_Price are entered manually, what I'm trying to do with the code above is to automate the data input into Product_Price field of tblOrderDetails.
My aim is to have my forms open to a new record, which I have done, but if my users need to then update or edit data in previous entries, they can click a button that allows this.
My thoughts were to add a button, then put in code so that the necessary properties changed the form from displaying a new record or records entered since opening it, to showing all records in the associated table....
As an example there is a table for purchase orders. When clicking on this from the main menu form, it opens up the purchase order form to create a brand new PO. At times though, we will need to revisit an order to attach a copy of an invoice, or update the cost of whatever was purchased.
I have a problem with making a (simple!) search form work in Access 2000. I wrote the code in (what i believe to be) Access 2000 version, and it runs on my machine that is Access 2002-3. The search form uses VBA code; an if-then logic for 3 fields that are chosen by the user, and discounts fields that are not selected. The code then filters results from a query based on 2 tables and presents these in another form.
This all works fine on my pc, and on others using Access 2002-3, with macro security set at medium (and macros approved to run). However, the search form does not work on pc's running Access 2000. I do not know the security levels for these pc's but please if anyone knows of what may be causing this... please help!!
i have a form that pulls in a subform specific to the CurrentUser(). It is meant to be a shortcut or favorites form that holds 8 command buttons. I have Dlookups on the form to pull the correct fields from a table for OpenForm or OpenReport and then the name of the form or report they want to open. My froms work but when i try and open a report, it just prints the (correct) report and does not open it. I just want to open it.
Private Sub cmdBtn1_Click() If Me.btn1Action = "OpenForm" Then DoCmd.OpenForm Me.btn1Details, acNormal, , , acFormAdd, acWindowNormal Else If Me.btn1Action = "OpenReport" Then DoCmd.OpenReport Me.btn1Details, acViewNormal, , , acWindowNormal Else End If End If End Sub
Right slightly complicated (in my eyes) and I have not found anything in previous threads to help but here goes:
I have a main form (FRM_SUMMARYREVIEW) that has an unbound subform field on it (subfrmmaster).
When FRM_SUMMARYREVIEW is first opened subfrmmaster has its sourceobject set to a form called FRM_OPENSUMMARY.
This subform lists all my open escalations, in a continuous forms format and has a field in it called "escalationid" and when I click this field "subfrmmaster" changes it's sourceobject to another form called FRM_MAINDATA and should display the data relevant to the escalationid I have just selected.
In the past I used to click on "escalationid" and it opened up FRM_MAINDATA as a new form, using the following code:
However how can I get the subfrmmaster sourceobject to change and display the relevant escalation detail ?
My other option is to have two subforms on the main form, one with "FRM_OPENSUMMARY" the other with "FRM_MAINDATA", as "FRM_OPENSUMMARY" has a list of escalations displayed, in a continuous forms format could I set it so as I arrow down the list, the data in FRM_MAINDATA displays the highlighted escalation in "FRM_OPENSUMMARY".
I have a combobox on an unbound form. After making a selection, I click a command button which opens a bound form to a new record. What I need to code next or add into the macro, is for the selection of the combobox to fill in the contact id, and contact name in the correct text boxes.
The combobox row source is: SELECT qryPBS.ConID, qryPBS.PBSName FROM qryPBS; bound column 1.
I have a navigation form with a combo box. The combo box has a running list of manifest numbers. I select a manifest number, then click a button that brings up a new form with data related to the selected manifest.
However, I have to click and unclick the 'Toggle Filter' button on the new form to show the correct data each time I open the form.
I have a code to add links to files into a field, I recently migrated from Windows 7 to 8 and the name of the folders in 8 are different; therefore the database I have does not find the linked file anylonger.
To avoid this happening in future, I would like to have the option for the user to set the folder path through maybe a table and then the link will refer to the settings in the table.
Currently I am using the following code:
Private Sub AddLinkDoc_Click() Dim strFilter As String Dim strInputFileName As String Dim varDirectory As String varDirectory = "C:UsersMarco TagliaferriDocumentsBA CityflyerCrew SchedulerDocumentationDocs"
We have a bunch of notes that are stored in a database. The program looks for the notes that are relevant to each order, and it adds them one by one to a textbox.In some instances, when highlighting the notes (as certain parts of them are copied by the user) it appears that you are highlighting the correct text, but when the text is copied and pasted, different text was copied to the clipboard (usually a string that is offset a couple characters).
I can't post an image (I haven't posted enough), but highlighting everything in the text box selects what appears to be blank space. I wish I could show you. Maybe I'll get to the needed number of posts and be able to attach the screencap.
Code: Private Sub Command26_Click() If Forms![test site]![prp test].Form.[A Right Answer] = -1 Then Forms![test site]![number correct] = Forms![test site]![number correct] + 1 End If DoCmd.FindNext End Sub
Then when clicked it checks a yes/no box to see if "A right Answer" is the correct yes. Then it should pop to the main form and take the number correct cell and add one to it. I am trying to get the record to go to the next record inside the sub-form but docmd.findnext seems to be wrong too.
