I have a continuous form for which the recordsource is a query that retrieves dates from 10 days in the past to 10 days in the present. I want the record with today's date to be at the top of the form. The record with the oldest date is always on top. Is this a scrolling issue? How can I get the record with today's date to appear on top?
View RepliesI have a main form with a continuous sub-form. On the main form I have a series of text boxes that I want to use as a makeshift status bar. The text boxes would be filled in if a value was entered into certain records on my sub-form.The problem I have is since the sub-form is continuous, how would I refer to the specific record on the sub-form that I want to check for a value?
View 6 Replies View RelatedAccess 2010. I have a form pulling from a query to create a "To Do' list of sorts. On this form is a button to open an input form for the corresponding record (I hope). When this button is used I want it to pull certain data for that specific line from the query and input it into the new record opened by the button. I know this is possible as I use another db that does this but I have not been able to figure out how to make it work in the new db.
View 14 Replies View RelatedHello,
I have a continuous subform that shows 2 records consisting of a text field and a yes/no field.
I was wondering if it was possible to take the state of one particular of the yes/no fields to trigger an event. Specifically, when one of the questions is checked [true] then I would like to make visible another subform on the main form.
Can this be done, and if so, how, or should I just leave my subform visible at all times?
Thank you.
I have a continuous subform recording the information of various wireless products for an employee embedded in an employee main form. Please see screen shot enclosed.
There is a check box "BYOD/Personal" on the subform. I want to hide a number fields when this check box on independent record is checked. However, if I use the following codes, the changes apply to all records under that employee.
Private Sub BYOD/Personal_AfterUpdate()
If BYOD/Personal.Value = True then
Me.Provider.Enabled = False
Me.XXX.Enabled = False....etc.
Else
Me.Provider.Enabled = True
Me.XXX.Enabled = True....etc.
End If
End Sub
How can I just disable those fields on the subform of a specific record when the BYOD/Personal field for that record is checked?
I want to hyperlink from a query direct to the relevant record in a specific form. I have a hyperlink field in the form which shows up in the query. When clicked in the query, this hyperlinks to the form but I cannot make it select the correct record in the form.How do I get it to select the correct record?
View 3 Replies View RelatedI wish having only one record display in a continuous form, after an "On Click" event. The database in which this question lies is attached.
On opening, the user first interacts with Table 1 (Continuous Form), then by clicking on ID on the details for that particular record appear.
What I would like to do is: When the user clicks on ID, only that record whose ID has been clicked on displays first on the continuous form, and then the PERSONAL form opens. To clarify further, my wish is that the sequence of events is:
User Opens Table 1 Form
User Clicks on ID (for example, let's take 2)
Only Record with ID 2 remains on the Continuous form.
Then details for record 2 display on the Personal Form that opens next.
The problem I currently have is with step number 3 above.
I have a continuous form with unbound controls. These controls write new records into a table using rec.addnew
If possible, I would like for the user to only be able to add/edit the new record only and not to edit the continuous form below. When I turn off edits on the form, I only get the new record to show. I found some pages that reference using code like .allowAdditons, .allowEdits and .allowDeletions but unsure of how to implement them since I have more than one control the user is entering data into. I also found another site that says to use a control to determine if the record is writable to: I do have a control that is set to =Date() on the default value.
I would like to highlight record when user will click Record Selector in the continuous form. How to do it?
View 1 Replies View RelatedI have a continuous form it has a field (DateStart) and a field (DateStartCarryOver). There is an event on (DateStart) for the (DateStart.Value) to be passed to a new record in (DateStartCarryOver).
My probem is that the new record dosent get saved (i.e. it dosent get an ID so a record isnt created. How can I create that record once the data has bee pased to it?
Combo box on continuous form should have the control source listed as the field on the form that will be updated. The Row Source, however, is a query that includes 2 things: the field on the form that will be updated (this part will be nonvisible in your form) and the table/query of selections you want to show up in the combo box (visible). Then ensure the Bound column is set to 1 and the Column count is set to 2 with Column Widths as 0";1"
View 1 Replies View RelatedI have continuous form in Access 2010. I highlight selected record. Now I would like when user will select record, that record will display button to give ability user delete it. For not selected records button not visible and disable. How to display button only in selected record in continuous form?
View 2 Replies View RelatedI would like to know how i can have a continuous form or subform with dynamic record source.
Before I was using a list box with dynamic row source and i had not problem.
Now about the continuous form i have problem when i define record source of form on the fly how we have to add fields to the form.
I have a continuous form based on a orders table and a details sub form.I list all the records in a continuos form in date of order.i need to change the colour of a single record based on the condition of a tick box on the original orders form
View 1 Replies View RelatedI have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA"
id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR"
id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
1)
DoCmd.OpenForm "GASTOS_EDITAR", acNormal, , "[editar_id] = " & Me.Gastid
2)
DoCmd.OpenForm "GASTOS_EDITAR", , , "[editar_id]=" & Me.Gastid
3)
stLinkCriteria = "[editar_id]=" & Me![Gastid]
DoCmd.OpenForm "GASTOS_EDITAR", , , stLinkCriteria
4)
Private Sub btn_editgs_Click()
On Error GoTo btn_editgs_Click_Err
Dim strWhere As String
strWhere = "[editar_id] = " & Me.Gastid
DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere
btn_editgs_Click_Exit:
Exit Sub
btn_editgs_Click_Err:
MsgBox Error$
Resume btn_editgs_Click_Exit
End Sub
Access 2002 . Can I condition a field to 'locked' on just one record of a continuous form subfile, based on the contents of a 2nd field in same record?
View 14 Replies View RelatedI've done this dozen's of time - but it doesn't seem to be working now. I have a continuous form (frmHome) where i want a user to be able to click on a record, and be able to open up that specific record in "frmCustomer". The key field here is pkCustomerID (i have it in the query).
frmHome is run off a query ("qryCustomer").
frmCustomer has "tblCustomer" as the source.
The code i've used on a button on "frmHome" is:
DoCmd.OpenForm "frmCustomer", , , "[pkCustomerID]=" & Me!pkCustomerID
It always only open Record #1.
1. I have created a button in a switchboard with embedded macro:-
Close Window
OpenForm (Form name: frmCustomerFind)
2. I have created a form "frmCustomerFind), in which I can select a customer name in a combo box named "CustomerName".
a. The row source: SELECT [tblCustomer].[CustomerID],[tblCustomer].
[CustomerName] FROM tblCustomer ORDER BY [CustomerName];
b. After Update Macro:
Open Form (Form name: frmCustomer)
SearchForRecord (Object Type: Form Object Name: frmCustomer
Record: First Where Condition = "[CustomerID]=" & Me.CustomerID
At the end, the form "frmCustomer" does open but not go to the record I want. It goes to the first record instead. (The frmCustomer has the "CustomerID" and "CustomerName" fields).
Need to open a form to a specific record.Ive done the command button wizard that opens the form to a specific record but but that brings up the form with the filtered button showing.I've tried to put the formula into the filtered section but that doesn't work.I just want to be able to open the form to the specif record and then be able to navigate to other records if required (without aving to press the filtered button)
View 1 Replies View RelatedCurrently, I have a form with tabbed pages in it. The second tab, I have a subform inserted into it. I have a completely separate form that looks through records. I want to be able to click on a record from the separate form and open the Main tabbed form, to the second tabbed page, to a specific record. Currently I have:
Private Sub Form_DblClick(Cancel As Integer)
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frm_Main_Data_Entry"
DoCmd.OpenForm stDocName, , , stLinkCriteria
Forms![frm_Main_Data_Entry]![pgAgreement].SetFocus
End Sub
Which opens up to the tabbed page just fine. but I can not figure out how to get to a specific record.
Also, the subform in the tabbed page, doesn't have the same controls as the Main tabbed Form itself, so when I add something like:
strCriteria = "Agreement_Number = " & Me.Agreement_Number
it won't work because it is not reading from the subform in the tab, rather its reading from the main form controls.
I have three forms: Form1 that contains subform1 and Form2 which is totally separate. Form1 contains a listbox that I use as a search form. When a record in the listbox is clicked, it populates Subform1 with more details.
If I am in Form2, I would like to be able to click a record which opens the listbox in Form1 to the same record (this will automatically update subform1 with the details).
I have a form that lists a number of orders (list box).
I have another form that has customer details as the main form and the order as a sub form and then another sub form for items....
How can I open the sub form to a specific record? ie I want to view order 14?
In Access 2010 I have built a FORM which has several records of several people. I am trying to email one record only to a certain person from that FORM. If I use the access email button it opens outlook but it sends all the records in the FORM to the person. I have tried even to use the micro, but still it attach all the records in the FORM and send it all as one bundle to other.
View 9 Replies View RelatedNo I know this one has been done, and I have a form with a button that this works on. Here is my problem. I have a list of parts in a continuous form, I added a button to open that specific record in a detail view and it works just fine. I used an open form macro and put in the criteria
="[Description]=" & "'" & [Description] & "'"
I have tried to use this similar procedure for another form, it however has two subforms in it and I get a data type mismatch in criteria exception error. I suspect that it has something to do with the subforms but am not sure.
in a continuous form i want to click on one record and have the one field change the background colour to highlight it. When I use the code: Field. BackColor = vbYellow it changes the background on all the records. Is there a code to say only for the record with focus?
View 1 Replies View RelatedI have been trying for weeks to get my login form to open up to a specific record on the mainform. I have built a form out of my Employee tbl (mainform). The table stores (ID,Name, password, EmpNumber ect.) I built a subform in that allows the user to type in the number of overtime worked on a paticular day. I have disabled the navigation on the main form so users can't advance to the next user but have enable the natigation on the subform so a particular user can advance to the next week of available overtime to input data.The goal is to get user login form to display a particular record on the main form and open a different form in the user is a supervisor.
Option Compare Database
Private intLogonAttempts As Integer
Private Sub cmdExit_Click()
DoCmd.Quit
End Sub
Private Sub cmdLogin_Click()
[code]...
'If User Enters incorrect password 3 times database will shutdown
intLogonAttempts = intLogonAttempts + 1
If intLogonAttempts > 3 Then
MsgBox "You do not have access to this database. Please contact your system administrator.", vbCritical, "Restricted Access!"
Application.Quit
End If
End Sub