I cannot get rid of the navigation bar from the subform. Navigation bar property from the subform is not appearing at Properties.
Also, how do I remove the left column?
Attached is a picture.
I use to Navigation form called "frmMain" and it's subform is "Transactions" and "frmTransactionsDetail". I just want to pass value from a field in "Transactions" Subform to other field in "TransactionsDetail" Subform by command button with vba syntax.
And Other one thing I want that, when I click a button Subform will refresh with vba syntax. How to refer.
I have a Navigation form that has multiple forms that I linked to buttons at the top. They open the forms (now subforms) for the most part just fine. The issues come into play when I click on a combobox that pulls from a query of a table. Once this data is selected I have another combo box that is supposed to be filtered based off of the original combo box selection. Everything works on the original forms but once they are in subform form I get the error "Forms!MGM Search Form!STATE" which is the name of one of the forms and its asking for me to enter a parameter value for the query. Its almost like its not requerrying the data like it does in the original form
Private Sub State_AfterUpdate()
me.Facility.Requery
End Sub
basically the first combo box is a list of states and then the second combo box is a list of facilities in that state. Once you click on the state in the first combo box it filters the facilities in that state. But again once in the subform view it will not requery.
A message "Microsoft Office Access has stopped working" appears everytime I input something in the Subform [Search] box beside navigation button. After that, the database closes. Attached is the screenshot of my subform.
View 5 Replies View RelatedI'm using Access 2010 and need to update a sub form in a form that is within a navigation form. So it goes:
Navigation Form > Main Form > Subform
How do I do this? I've attached the following to a click event of a cmd button but I just can't get it to work:
Forms!frmMain.NavigationSubform.Form.frmJobHeadSub Form.Requery
I am attempting to create a Navigation Form to allow another computer in my network to be able to utilize necessary forms within a database (through RunTime). I was hoping this would be a clean task by simply loading the forms into the tabs of the Navigation Form, however that is clearly not the case.
For starters, When attempting to use a form that has some VBA behind it (Docmd.ApplyFilter based on a selection from a combo box), I am given the error stating: "The action or method is invalid because the form or report isn't bound to a table or query."
After searching on this error, I believe it's because my Navigation Form does not have a record source. If this is the case, then I am confused as to what record source it should have, as with the 3 forms I need to access through the Navigation Form all pull data between various tables and queries within the database (some not related).
Now I've also come to the conclusion that my VBA references now must change in order to correctly use my forms. A correct reference would look something like:[Forms]![Navigation Form]![NavigationSubform].[Form].[My Form's Control]..Is this necessary in order to write any events, such as an AfterUpdate on a combo box?
I have a navigation form, a navigation subform, and then a subform. When I click the save button on the navigation subform, i need the data entered in two fields on the subform to save in a table. the subform is based on a query. This is what I currently have on the the button's onClick event:
Code:
Update data_tbl
Set [data_tbl].[Approved] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![CboAppd]
[data_tbl].[Comments] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![txtComments]
WHERE [data_tbl].[ID] = [Forms]![Navigationfrm]![Navigation subform].Form![Entry_subfrm].[Form]![ID]
have set up a navigation form which contains 5 unbound subforms that are made visible or not visible thru the on click event of command buttons on the main form, the subforms have a command button with an embedded macro that searches for a record based on what has been keyed to an unbound text box on the subform, this works fine when the sub forms are opened independently of the navigation form but when the search is done from within the main form, the error message is, "....cannot find the referenced from frmAQIFAList" subform, I tried referencing the main form name infront of the subform name but this also doesn't work, perhaps this would be better with code ? or is it because the subforms are unbound ?
View 4 Replies View RelatedI have a form, frmProjects, with a continuous subform, sfrPeopleOnThisProject. They have a master-child relationship. The form shows one Project record at a time, while the subform shows all the People records for that project. This works as expected - the correct records show up in the subform as you move through the form records.
To make it easier to glance through the list of subform records (as they can sometimes be quite long), I've added a navigation combobox to the header of the subform. If I understand correctly, as the combobox is within the subform, it should obey the master-child relationship: it should only show the subform records associated with the main form's current record. It does not. Instead, the combo box collects *all* of the records from the table that the subform is based on. So, choose the record for Project 1 in the main form. Up pops the 2 people on Project 1, but the combo box lists both the 2 people on Project 1 and the 3 people on Project 2.
The row source for the subform combo box is:
SELECT tblPersonOnProject.PersonOnProjectID, tblPerson.Fullname FROM tblPersonOnProject INNER JOIN tblPerson ON tblPersonOnProject.PersonFK=tblPerson.PersonID ORDER BY Fullname;
I can make the combo box perform as required by adding "WHERE Project=Forms!frmProject!ProjectID" to the row source and placing a hidden textbox on the main form for ProjectID (the autogenerated primary key) to sit. Have I misunderstood the point of the master-child relationship in the subform? This hidden textbox thing can't be correct.
There is a command button on my form that calls a filtered query. I'm filtering the query based on a combo box within the form using
[Forms]![frmAssignDwgs]![Combo15]
It works beautifully until I put the form as a subform in the Navigation Form I'm using. When I execute it from within the Navigation form, it errors out looking for [Forms]![frmAssignDwgs]![Combo15].
Is there another syntax I can use so this will still work from within the Navigation Form? Or another way to approach this functionality?
frmNavigation is the main navigation form
frmAssignDwgToPkgs is the subform that holds Combo15
I found another thread (which I can't link to since I'm new) and tried various arrangements of the following to no avail.
[Forms]![frmNavigation]![NavigationSubform] .[Forms]![frmAssignDwgToPkgs]![Combo15]
I am not able to disable NavigationButton when i login navigation form using login form. I am using MS access 2007 - 2010.i am using below code but getting error.
Forms![Navigation Form]!NavigationButton13.enable = False
Error
Run-time error '438'
Object doesn't support this property or method.
Any other method to disable NavigationButton.
I'm working on the Navigation Form template in Access 2010, which is new to me. It appears that one needs to use the BrowseTo command to open up a form in the built-in subform module. I'm trying to create a couple of buttons where each button opens a form in a different data mode; one in read-only and one in add mode. Here is the syntax I used for read-only:
DoCmd.BrowseTo acBrowseToForm, "frmSales","frmNavigation.NavigationSubform", , ,acFormReadOnly
frmSales is the Sales form I want both of the buttons to open and frmNavigation is the Navigation form. It seems to be ignoring the data mode part at the end however. It only will open in Edit mode. Is there something I'm doing wrong with this command?
Hi,
I've got a form including a subform in datasheet view. I get rid of the defaulted scroll bars and navigation icons provided in the subform.
Now, I added my own buttons in the footer section to manage records in my subform ; by checking the forum, I understood that the items put in the footer or in the header section won't appear if I use the datasheet view.
Is there a way to use my own navigation buttons instead of the default ones ??
cheers.
Fab.
Access 2010. one of the forms i load into a navigation form is in datasheet view and some vba re-sizes all the columns as it loads in.
However, this then means that when i try to navigate away to another form i always get prompted whether to save the form or not.
because the form is in a navigation subform i can't use:
Code:
DoCmd.Save acForm, Form_NavigationForm.NavigationSubform.Form.Name
' or this...
DoCmd.Save acForm, "my_form"
in both cases i get an error : the object my_form isn't open
I have an Access 2010 application and I'm having trouble referring to properties in my subform withon a Navigation form. Based on a selection in a Combo Box, I need to change the filter on the subform. The relevant forms are:
Main Navigation Form = frmAdminNav
"Standard" Navigation Subform = NavigationSubForm
My Subform = frmShowInventory
How do I refer to the Filter property on frmShowInventory?
I have a navigation form which has two subforms on it (ie 2 tabs linking to different forms). I have got aq filter working for one of the forms but not on the other. This is using
If IsNull(Me.txtoperationscontract) Then
MsgBox "Please type a contract number into the textbox!", vbInformation + vbOKOnly, "Incorrect Details"
Else
Me.OperationsSubform.Form.Filter = "[Contract]='" & Me.txtoperationscontract.Value & "' "
Me.OperationsSubform.Form.FilterOn = True
End If
The problem is that it does not work on subform B because the Contract field does not exist.
New to the navigation form: I need several forms in the navigation form to all relate to the same client ID field. I have this information on the main form but the form with in the navigation form will not pick it up.
I have tried =[Forms]![Frm Client Information Navigation Panel]![ClientID] But just cant get it to pick up that information...
I would like to have something like the master link fields and, child link fields but when I add a form to the navigation form this option in not available.
I want create combination of navigation forms, navigation forms with two horizontal level and vertical level that link to navigation buttons in second level of horizontal navigation.
View 1 Replies View RelatedHow can I stop a mouse (with a roller scroll) in the middle from navigating through records without me clicking on the forms navigation buttons.
View 1 Replies View RelatedI have set up my main data entry form as a navigation form with 5 tabs/pages. The first three all contain fields from my main data table, the other 2 tabs/pages have fields from related tables.
Ok, so my question is: is if there is a way to go from tab/page 1 through the other 4 in succession with the main primary key (in this case an object ID number) automatically populated through. As it is now, when I start a new record for an object on tab/page 1, and then go to the next tab/page, it registers a new record has been created (at the bottom of the form it updates the total amount of records entered), but I have to manually enter in the ID field at the top the object ID number that I am entering info for. Otherwise it is still showing the details associated with the last record I was in the form updating.
I have a Main (Home) form that has a sub navigation form (frmNavigationSubform).Need to access 3 forms. Forms 1,2 and 3. Also, have 1 options form.
Subform has 2 Navigation buttons. NavigationButton2 and NavigationButton3.
NavigationButton 2 Navigation Target Name = 1 (frm #1).
NavigationButton 3 has no Navigation Target Name. This is passed on when user picks Option1 or Option2 form options pop screen.
Now I can pass the name to the Navigation Buttons2 but the subform does not show it. I have to click on the Navigation Buttons2 again for it to show. What I want is when the user makes the choice in the options screen the name is passed and form 2 or 3 should load/show.
I have a form imbedded in another and would like to remove the navigation bar from the form being imbedded so 2 do not show in the final product.
Is there a way to do this and if so, how would I do it.
Thanks!
I have created a master form, which is a tab style. I have five additional forms that I want to use as sub-forms within each tab. I also want to include master navigation buttons that will work for each sub-form in unison. In other words if I navigate to record 10 on tab 1 and switch to tab 2, I want the new tab to show the information related to record 10. It would appear that I need to link them together in some fashion.
View 1 Replies View RelatedSorry if this is too trivial to be posted as a new thread, I have spent a considerable amount of time trying to do this but have failed miserably.
I want to remove the set of command buttons at the bottom of the forms, (the navigation buttons to move the next record etc.) as i want to create my own. And also when I have got two or more subforms this looks too cluttered.
Can anyone help me?
Thanks.
I am using Access 2007 and am a former user of an old flat-file 32 bit program under Windows 3.x. I am fairly new to MS Access 2007. I run a filter or query, which will return X number of records. Then, I will search those X records by specific text, such as "assist" from the record navigation buttons. I search for "assist" and the text will be highlighted each time it is found in any text or memo field in the record. Hitting Enter takes me to the next occurrence and highlights the text. If "assist" occurs in 4 fields in a record, for instance, it will be highlighted in each of those 4 fields one by one as I hit Enter. The next Enter takes me to the next record and will then continue to the next occurrence of assist" in any of its fields. It will continue to highlight "assist" in those fields, in succession, until the last occurrence in all of those records is found, in which case Enter does not return "assist" anymore because the last occurrence has already been found.
This does not always work. Often, I get every occurrence of "assist," but in the current record only, even though the word exists in other remaining records that were returned with my original filters/query.
I am using Access 2010.
In my database forms, i try to use Ctrl + F and its working fine. But when i link that form to a Navigation form and tried ctrl + F , i got the following error message, how to fix it.
Error msg.
You Can't use find or replace now.
I also attached the error msg.