Forms :: How To Copy Fields From 1 Record To The Next
Aug 6, 2013
I have fields on a form for the Date, the Start time and the Finish time. These won't change for the next 120 records. So, upon opening a new record, I'd like the Date and times to appear there already. But here is the crux: After about 120 entries, the date and Time changes, for the next 120 entries. So, once the 'batch' is finished, or I close access, the values do not need to be remembered until I enter a new record.
I copied something like the following from a book and tried running it with various modifications, just for the Date to start with, but no luck. (It did strike me as too simple for something, clearly, as unbelievably TRICKY as my problem...) I did find quite a few posts on this here but none seemed to work for me, or made sense to me in the slightest. (I did mention that I'm a complete rookie, didn't I?)
Private Sub Acquired_date_AfterUpdate()
Me!Acquired_date.DefaultValue = "'" & Me!Acquired_date.Value & "'"
End Sub
The underlined part (acCmdRecordsGoToNew) is false part of this code, because it copies the Adress Info to a new record, instead of copying it in the same.
-Is there someone that can help me with this problem, to make the copy-button in the Form run properly?
-Are there other options to achieve te same?
I have put in a attachment, to give you guys a visual example of what I mean.
I am new to access i have a problem which is i have made a form which contains a subform and a read only subreport, what i want is the ability to select a record in read only subreport as in the picture attached and make a button that when i press on it, it should copy the values of the itemsID field, Packing field, ContainerNo field and origin field from the selected record and then paste them in the subform below.
Also i want to add more then one item, so the when i press on another record it should paste the values below the first record.
I am working on a database used in recording device characteristics/test information. The main table of information has dozens of columns for test/part detailed information. When inputing the data for each specific test, many of the info. details are repeated when testing say 20 devices of the same part all at once. Rather than retype every piece of detailed information in every field, everytime, is there an easier way? Does anyone know of a way to make specific fields copy/paste the previous record's information in the fields automatically when a new record is created? Please, if anyone could help or has ANY ideas, let me know...
I currently have a form for a handover process and am looking to have a button to ideally take a section of inputted information from the form and place this into an email.
I want to copy all these fields from my form, ideally into a new email but if not possible then atleast just to clipboard, is there any way to do this?
I have this access "Database" that contains only one table that I'm trying to make a form for. I want it to allow the user to enter a value for field A and a value for field B then a list of values for field C (which is the key, so each would be a new record all with the same values for field A and field B). I tried to make a multiple item form but when I click on the new row for field C, fields A and B both disappear.
Disclaimer: I know that the creation of a one table database is a mortal sin but that's what my boss gave me and there are already >8000 records with a million mispelled words, so I don't think there's much I can do to make it a relational database without entering each record in again.
I am using MS Access 2010 and I am trying to figure out how to copy a field(s) to another like record. For example I have simple split-form that contains detail items purchased (product number, item purchased, cost, etc). I have a check box call "chkApproved" and date box called "Approved Date". The user have a choice to select the invoice number, once selected the invoice number (there maybe anywhere from one or 2 to 4 rows based from the same invoice number).
The manager will go to the first record and check the "chkApproved" and date is automatically updated as today's date (Approved Date). This is fine if there is only one row, but when you have the same invoice number with 2 to 4 rows the user has to go to each row and check the box. I want to somehow automatically populate the rest of the rows within the same invoice number I don't need to create a new record only updating the existing records.
I have the employee data record... I want copy of the same record to insert in table but with different employee id and Site through forms. StaffNo is the primary key.
I have a subform for which I want to loop through all the records and then copy one of the fields for each row into another sub form.
I came up with the bellow code but i get an error when I run it.
The error is an "error 438".
Code is at follows and I am copying the field called price:
Do Until Forms![Roll Out - Site Form]![Roll Out - Sign items pick list].EOF [Roll Out - Sign items added].Form![Price] = [Roll Out - Sign items pick list].Form![Price] Forms![Roll Out - Site Form]![Roll Out - Sign items pick list].MoveNext Loop
I found and pasted some code which copies records from the previous record on the form. Seems to work well, but I was wondering if there is an issue with the copying of the first field which is a combo box?
Currently I have created a data base and form. I am at a point where I need to copy data from one record specific field to a different field in the new record all while creating a new record.
Create a new record
Copy field in LastWeekInfo current record to New record ThisWeekinfo field
I have uploaded a small database. I keep track of payments for people who receive a language proficiency allowance. Usually the members receive this allowance for two years. Sometimes they receive it for one year.
Lang Level DateQuaFrom DateQuaTo DatePd From DatePd To Hindi Inter 15-Dec-12 14-Dec-14 15-Dec-12 14-Dec-13 Hindi Inter 15-Dec-12 14-Dec-14 15-Dec-13 14-Dec-14
There is a field called NoOfPays . If this field value is 2 in the first record then I want it to insert a second record as shown above. How do I do it. I tried to append but it is not working.
Now copying the record with the maxID is not correct.
Let's say, I'm updating a record, and I have a combo-box that says transfer and another combo-box that states "where to?" - or words to those effect.
Each record has a field for credit value and a field for debit value.
When I've finished entering the current record, I want to run code that fires the event, so, copies all the data from one record, to create a new record, BUT...
1) changes the "where to" from the old record to "From" in the new record. 2) changes either the credit or debit value, to the opposite in the new record?
I would like to do this from a sub-form. I can copy a whole record, no problem, but can't seem to change field values.
I've rebooted my copy record button and just used the macro wizard for now, it seems to work as far as I can tell but there is something strange about it.
I've added in some text boxes so I've got some confirmation, but when I click this copy button I get the following error;
"The command or action 'RecordsGoToNew' isn't available now."
I have a form with 2 subforms, each based on their own table. One displays categories of invoices (e.g. rent, electricity, etc.) including some details like monthly costs.
I would like users to be able to select one of those categories and copy this to another table, after which they can enter on what date the invoice was paid, to make a history of payments.
At first I based fields in the history table on fields in the categories table so that you could simply pick a category from a combobox. I had an after update event on that combobox that also automatically set the 'costs' combobox to the matching price.
Worked fine, but had one snag: if I update the costs of a category in the categories table (e.g. the rent goes up) then all the costs in the history table was also updated because the fields got their info from that table.
So now I no longer have field from the history table based on the other table, and want to use 'set value' to copy values from one table to the other. I'd like the user to be able to somehow select a category with a single click on a button, and getting the info for that category copied. However, how can I get access to know from which record I want the fields copied?
Or is there a completely different way to get a history of payments that works much better?
I would like my users to be able to view stock items in one (sub)form and when they double click on an item, then certain data is copied to an orders (sub)form.
I have therefore embedded two unbound subforms into a master form.
The master form (Frm Stock) has no fields, but it has 2 subforms.
Frm_Stock_Subform and Frm_OrderDetail_Subform
So I have 2 problems here.
Problem 1:I would like the following code trigger when the user double clicks anywhere on the record that the user wants to order.Thus far, I can only make it fire only when the user doubl;es clicks in a specific field (in this case, the ID field is the trigger)
Problem 2:I cannot activate the Frm_OrderDetail_Subform in order to create the new record. (I have looked at this link - Refer to form and subform
Code: Private Sub ID_DblClick(Cancel As Integer) On Error GoTo Err_ID_DblClick Dim MyOrderID As Variant Dim MyStockID As Variant Dim MyAmt As Variant
I have a form that i input information into. I have a combo box labeled Addendum, you can select "yes" or "no". What i would like to do is if user selects "yes" then a new record needs to be copied with exact information form original, with the excpetion of a field labeled "tape review #" 1403310000 for example. "-AD" needs to be added to this new record after the review number. Also the field "tape review #" is indexed not to allow duplicate numbers.
I have an access form that needs filling in daily by various people.
It's to document changes to a website and I currently have a combobox box set up for the various sections to state whether they are AMENDS, REVERTS or NO CHANGE.
I have set conditional formatting to then highlight these sections but am also trying to get it to work so that if the user chooses "NO CHANGE" then the data for that field copies over from the previous record.
I have set this up in the AfterUpdate code for the combobox, but nothing is happening, not even an error....
Code: Private Sub COMBOBOX1_AfterUpdate() If Me.COMBOBOX1 = 3 Then Me.[FIELD_TO_CHANGE] = DLookup("[FIELD_TO_CHANGE]", "tb_TABLE", "[ID]=Forms![form_FORM]![ID]-1") End If End Sub
(Where 3 is the value of NO CHANGE in the combobox, and FIELD_TO_CHANGE, tb_TABLE and form_FORM being the names of the various elements)...
I have a simple data entry form on which there are about 30 to 40 data fields to be update by users. One of the field is called "Stage" which is a combo box with 2 entries "Formal Case" and "Informal Case" with no default value whien a form is first opened.
Users will normally create a data entry which updates the table and save.
However if in future users open any one existing record and try to change Stage field from Informal to Formal or vice a versa I would then like this action to
1) update a time stamp concatinated with the stage change value in a text field perhaps
2) save/close the form
3) open a new form with all the existing entries(plus changed status of "Stage Field") with a new record ID and new time stamp.
I created an unbound text box on a form that automatically pulls the current logged in user by using this:
Private Sub Txtuser_Click() Me.Txtuser = Environ("Username")
The form grabbs the logged in user with no problems, however, I ultimately want this information to also end up in my table. So the form has three boxes (to keep it simple). The user will type their first name and last name manually on the form which the record source is this "table" where their name goes to the table last name =Field 1 and first name=Field 2 respectively. I want the unbound box from the form to place the logged in user in Field 3 for the current record.
I am tasked with creating a scientific database of fish catches at various different sampling stations. I envisage the entry form having hierarchy levels, ie year, season, date, sample station, species caught, and then the specific associated data with each species (weight, abundance, length etc) will form each distinct record.
In each year there are 2 sampling seasons. In each sampling season there are up to 20 dates on which samples are taken. On each date there are up to 50 sample stations recorded. And at each station up to 20 species can be recorded.
In order to enter each species caught in a survey, the end user will potentially have to fill the season box with an entry 40,000 times. For each season there will be 20,000 date entries to be made. For each date, 1,000 station code entries, and 20 species entries for each station. What I would like to happen is this.
When the end user is entering the data, he or she will be working through the hierarchy from the ground up. Ie., they will enter a particular species' data (abundance, weight, length etc) at a particular station on a particular date during a particular sampling season. The next entry will be a different species at the same station on the same date during the same season. I would like the duplicated information from the previous record to be copied across onto the new one so that all the end user has to do is enter the species name, abundance weight and length data.
Once they have finished entering all the species data for that particular site, they can move onto the next site which they would fill in the data themselves for the station code. So, in the hierarchy, the first button would copy all the previous data except the species name and associated weight length abundance data. The next button would do the same, except leave the station code blank. The next button would leave the species name, station code and date blank. And so on up the hierarchy. The end user would be able to selectively choose which data is copied over by using these buttons, saving lots of potential extra work doing repetitive entries.
I would like to create a command button on my form that copies values from 5 fields in the current record into a new record leaving all the other fields blank except for the new record ID.
The fields that contain the data that I want copied into a new form are:
I hava a small dbase in which we store address information. Now you have a visit address, a mailing address and billing adress.
I want to use some buttons which trigger macro's to fill in these "Secondairy" addresses FROM the visit adress.
So a buttun that says: copy billing address from visit address. and then the street, Number, PO box en city will be copied from the visit address to the billing address.
It's probably possible through a macro but I'm having a hard time coming up with the syntax. Or it there an easier way? :confused:
I am running A Form. I have created it that I if I Double Click on one of the fields, it automatically creates a copy (which is run from a Query). That all works fine. My problem is that my Table has 500 Records and I want the Form to jump straight to the New Record after it creates it. Here is my Code: Code:Private Sub USName_DblClick(Cancel As Integer) DoCmd.OpenQuery "Copy_Drug" Me.RequeryEnd Sub
I have a database for staff to request checks to be cut. I have one table with a group of regularly used payees & addresses. A second table stores data for each individual check request. I need to be able to copy a record from the addresses to the check request. I do not want to add all addresses to the address table, as it is only for commonly used payees. So from the check request table, I am able to lookup a payee, which opens the address form to display the address. I need to be able to copy the displayed address to the open check request form.
I created a button in a form that duplicates the record so our employees can fill in the form more quickly.
I know I am being greedy, but is there someway to change the VBC so I only duplicate certain fields in a record, not all of them?
I have attached a (.jpg) of the Duplicate record code that is automatically created by Access when you use the "Duplicate record" option when making up a button on a form. I have attached a 2nd (.jpg) which shows the (7) fields I want to duplicate, out of the (20) available fields for each record.
