My tab name is SPA and it is the third tab in my form. I want to hide it if the AddToSPA checkbox is checked. This is what I have but I'm getting error 'Compile error: Method or data member not found"
Code:
Private Sub Form_Load()
If Me.AddToSPA = True Then
Me.SPA.Pages(2).Visible = True
Else
Me.SPA.Pages(2).Visible = False
End If
End Sub
I am trying to write an IF statement as a macro on the OnClick property of a checkbox and can't get it to work. Basically, if the checkbox is checked (for Yes) I want it to open another form. (The checkbox is a field on a subform on a form).
I haven't even gotten this far yet, but I would also like the IF statement to include an AND somehow....in other words I want the IF statement to basically say if the box is checked for yes AND the offer status field ="Accepted", then open another form. If either is False, then I don't want it to do anything except display a message box saying they can't initiate a contract is both conditions aren't true.
I have a text box on a form, currently it performs a dlookup for me. I want to change it so that it only performs the Dlookup if a checkbox is checked, but otherwise will display the text that's in an unbound text box.
Not 100% this is even possible, but hoping so. So far I have in the textbook:
=IIf([CHECKBOX]=0,DLookUp("TABLE","FIELD","ID = " & [Text57] & ""),[TEXTBOX])
The dlookup works fine by itself, it's just making it conditional that's causing me problems. I know it could just be a small problem with the way I've written it, or it could be a bigger thing with me not understanding the way IIF works.
I have a checkbox that when checked returns all of the yes values for the column but I want it so that when it isn't checked, it doesnt search for this criteria at all, is there a way of doing this? I tried option buttons too but I wasn't sure of how to go about it.
View 13 Replies View RelatedI am having a problem with making a textbox visible on a form if a checkbox is checked on the same form. I have done research on this site and have written the code below, but I am getting a Syntax error, see yellow highlight.
- My checkbox is named: Case is a Readmission from WRCA IP to WRCA IP
- My textbox is named: Date of Current IP Admission (I have defaulted this textbox to not visible).
Here's the code I have written:
Private Sub Case_is_a_Readmission_from_WRCA_IP_to_WRCA_IP_Clic k()
If Case is a Readmission from WRCA IP to WRCA IP =true then
Date of Current IP Admission.visible=true
Else
Date of Current IP Admission.visible=false
[Code] .....
I've been scratching my head all night, can someone tell me why the attached query doesn't work?
Thanks,
Sup
Hi
I've searched the forum for my problem and the closest i got was this and it doesn't help that much
If this is the code you can put on click for a checkbox to hide a textbox.
If me.YourBoosterCheckBoxName = -1 then 'need the shot so hide the other textboxes
me.TextBox1.visible = false
me.TextBox2.visible = false
'etc....
else
end if
How do you make a code for a checkbox to SHOW a textbox?
I have chart (grpMaster) that is embedded in a form (frmMain), the chart is a line graph based on a query (qryDataFilter) with 4 data series.
What I want to do is have various checkboxes (chk1 to chk4) that if selected show the series and if no don't - It seems straight forward!
I've tried SeriesCollection() but this comes up with errors. (Object doesn't support this property or Method).
The easiest way i can think of is just to hide / show the series line on the chart, but can't figure this out?
is there any way to open a certain website after checkbox is checked?
View 1 Replies View RelatedI am trying to create a medical records inventory. We have physical charts which each have a barcode and I have a scanner. The idea is to have employees who want to check the chart out scan their barcode (on their badge), scan the chart's barcode and leave.
I have a table called tblCharts with the fields: ID (primarykey which is also the chart number), a checkbox, Employee ID, Date, and Time checked out.
I have Employee ID linked to my tblEmployees that simply has a listing of the employee ID's and first and last names.
I don't care about keeping a record of who has had the chart in the past.
I just can't figure out how to tell the checkbox to be checked (to indicate the chart is out) when a number is added to the ID field (via scanner).
So here's how it would go:
Scan the chart's barcode which would populate into the ID field. Search to see if the record with the same number is already existing, if not create a record. IF it does exist, check to see if the checkbox is checked. If it is checked then the chart is being checked back in (so uncheck the box). If it is not checked to begin with (still in), then check it out and associate the employee's scanned barcode with it.
Dear All:
I have a form with a checkox. Is there any way to keep a running total on the form to display how many times a checkbox has been checked?
I am clueless on this one, any help is most welcome.
Regards,
Dion
Hi All.
What I would like to do, is have a form popup when the main form is opened in my db, which will detail all the changes I have made to it since the last version (this bit is OK) and also, I would like a checkbox on the popup form, that the user can tick once they have read the details so it will not show up everytime they open the main form. (Just like the "hidestartupform" property within the Northwind Database)
I create the form and all that, but do not know how to do the checkbox so once it is checked, the form will not appear.
Hope this makes sense and someone can enlighten me and point me in the right direction?
Many Thanks.
Frank.
I have a sub form with checkboxes. Each check box represents one of the columns/fields in my query. If one of the boxes is checked, I only want the column that matches with the check box to appear. I have done some research and have came upon the ColumnHidden property.How would one do this in a macro or VBA format.
View 1 Replies View RelatedI want to hide on my report unchecked checkbox ?
How can i do that ? If i shall write a code, in which event ?? Or can i use in Query Build option ?
I searched on internet and found some answers but they are not useful
(i found this code and updated for my report but still did not work)
Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer) (<- what is that ??)
If Me.Skyliner = 0 Then
Me.SkylinerCover.Visible = True
Else
Me.SkylinerCover.Visible = False
End If
quote : [URL]....
Currently I have a query where the criteria is dependent on the combo boxes on my form. I would like to add checkboxes to my form which determines which fields are shown or hidden. For example if I had a checkbox for address, selecting it on my form will show the address column in my query results.
View 4 Replies View RelatedHi,
I was wondering how to delete records that have been checked (through a checkbox) in a form...
Also, I want to add a record after the record that has been checked. I only want this ability to add records available if only one record is checked. Otherwise, if more than one record is checked, the "Add Record" button would be disabled.
Any help would be much appreciated.
TIA.
In creating a form with checkboxes created using the "option group" control type,
I am trying to find a way to clear all the checkbox options in an option group after having checked an option. For instance, if the user checks one of the options but then decides they actually want to skip that question altogether and leave it blank - is there a way to clear all options, or reset the question?
I have set up a database to record several different sets of records for a volunteer group that I run. The types of records that I am keeping are hours on duty, uniform issued and attendance at training. The attendance form is a subform which contains a list of dates and the two fields of checkboxes showing if they attended or sent their aplogises.
What I am trying to do is to count the number of times that members attended training. I have set up a 'unbounded' text box in the footer and would just like to add a formula in to the command box of the box properties. Anything more i.e. coding then it goes over my head very quickly.
I have created a user form that contains check boxes for various fields, and on this form, when the box is checked, I get a prompt that the field cannot be updated. I have several other forms that use these same yes/no fields, and I am not having the same problem on these forms. I checked the property sheet row source for the form and I don't see anything wrong with the select statement (that I know of).
View 1 Replies View Relatedhello,
i have a form that shows up when I start my database. It has a combo that users use to select their initials.
This form is run by the autoexec macro.
The forms stores users names that then are propagates to other forms without having users each time selecting their initials.
Is there a way I can hide the first form behind others so that it keeps the data active? I have tried to minimixe it but still can see in the gray toolbar.
Thanks.
Hi all,
I was wondering if there was a way to hide certain forms or reports from the view when you open an mdb? I would still like them to view it if the form thats not hidden opens the hidden report or form as well.
How would i go about doing this?
Thanks alot
I usually use ComboBoxes to show a user-friendly name instead of an ID. For example, I would use a ComboBox of EmployeePK, FirstName + " " + LastName and set the first column as the control source but with 0" width.The issue is these are supposed to be read only. I can prevent the user from changing the field but I don't have a good solution for hiding the ability to select the drop down.
My current method is to create a transparent box over the combobox (so it can't be selected) then hide the dropdown arrow with a background colored rectangle.
can i hide a record when i look it in a form. For example i have a table which has 100 records. Can i make some kind of a check box and if that check box is checked to make the record disappear. I want the record to be in the table but i dont need it in the Form.
View 14 Replies View RelatedI downloaded Checkbox open form.zip from this site. It uses option group for the checkboxes
It runs perfectly when I double click in access but i would like to use this in vba when called from another form. When i put the code in and try to run it I get the error:
Compile Error
Method or data member not found
It is referring to .Frame8
Here is the code I used:
DoCmd.OpenForm "Mainform", acNormal
Select Case Me.Frame8
Case 1
Open Form 1
Case 2
Open Form 2
Case 3
Open Form 3
Case Else
MsgBox "You did not make a selection"
End Select
Can you have a hidden field in a form? Trying to set up an order process system where I need to take a wholesale price of an item then mark it up (behind the scenes) and display only the customer price. How can I accomplish this.
View 4 Replies View RelatedI am trying to hide the first 6 digits in a textbox and only show the last for digits in a text box.
So far I a putting my code in the Format Format section in Property Sheet of a form. Its not seeming to work.
Code:
Left([Card Number],Len([Card Number])-6)