I have a form that I populate after making selections in two combo boxes but when I load the form the text boxes are already filled in with the first record. The combo boxes load blank, which is what I want.
How do I get the rest of the form to be blank on load? It is made up of text boxes and check boxes that are all bound. Will this only work if they are unbound?
There are 2 issues I am trying to figure out for an Access2007 form:
1) I should first state that I am working off of 3 tables:
a) Marketers
b) Companies that belong to those marketers
c) Points of Contacts (POC) for each Company
2) In my frmMain, I have 2 combo boxes. The first loads the second and the second loads a CompanyID text field (IDc) that the subform bases for which record info to pull. How do I get the CompanyID (and subform) fields to load blank upon form open and until the 2nd combo box selection is made?
3) A company that doesn't have any POCs entered yet won't load its CompanyID even though it DOES have an ID number. Well the Id not being changed doesn't change the POC info either. I am guessing it's because there is no info to fill in the subform yet. However, I need to be able to still pull up the blank fields so I can ADD a POC.
Hi All,
Am using a number of combo boxes as selection criteria for a report. The combo boxes are linked to a table, obviously there will be times when no criteria is required and will want to select "ALL" when left blank.
Is there a simple solution ?
Cheers
First, just want to say I wish I had found this site a long time ago. Lots of good stuff here :) I don't know a lot about Access, but know it can be a great tool for what I need. So I hope I can find the help I am looking for...
Ok, on my form I have three unbound combobox's that I use to filter the information I want. The first two do not need to be used, meaning that the third combobox will show all the records if the first two are left blank.
With that being said...
I would like the form to show no data until the selection is made in this third combobox. SO, my first question is how do I make the form show no records till this combobox has a selection. And second (at the same time), make that third unbound combobox with the selection load that record to the form fields so they can be viewed or edited??
I'm sure it can be done, but I am lost...
Hope I explained it ok :)
Thanks in advance!!!!!!
After creating several combo boxes in my new forms, I noticed that there were blank values being displayed. Is there anyway of creating of creating a listing of unique values and not displaying any blank values for the user to select from?
View 1 Replies View RelatedI am having an issue trying to show all records when I load my form. It loads correctly when I don't have a record source for the main form. However, the combobox filters will not work. My goal is to have users be able to use the datasheet, subdatasheet and combobox filters. I can get the form to work just fine when I link the Main form and subform, but when the form opens it is filtered on the first record. I have been successful with this approach when using other forms, but they didn't require a subdatasheet.
Is there anyway I can have the comboboxes to filter yet be able to show all records until the user selects filters? Is this possible?I finally got my Manager to agree to use a database instead of Excel files based on this form setup and I need to make as "user friendly" as possible (look and function like a spreadsheet) I attached some pics of the form along with the code for the filter.
I have a form that I would like to have blank fields when it is opened. I put the following in the "On Open" Event field of the form properties:
Private Sub Form_Open(Cancel As Integer)
DoCmd.GoToRecord , , acNewRec
End Sub
However, it does not work. I have an unbound combo box on the form for users to select from, in which all the records on the form will populate with whatever is selected in the unbound combo box. I thought this was the problem at first, but even if I remove that from the form, the form still opens to the first record. If I set the "Data Entry" field to "Yes" on the Data tab, that works, but then none of the fields populate when using the combo box.
I have two forms linked together.
frmMaterialRequest
MaterialRequest
Status
frmHandledBy
MaterialRequest
HandledBy
What I want is to meet the following:
- Form 2 to be locked but its "MaterialRequest" is enabled.
- HandledBy to be unlocked if the MaterialRequest meets the "Status" of "frmMaterialRequest" which is "Approved".
I have "donations" form with a cbo called "DonationType".
(frmDonations.DonationType)
General
Employee Match
Employer Match
Angels*
Friends*
Royal Crown*
The last three options need to redirect the user to a different form used for pledged donations.
In the Contacts Table there are two fields, the unique Contact ID key field numeric and the Contact Name. Like this:
Contact_ID; Name
1; Tom
2; Dick
3; Harry
In a form named "Selection" there is a Combo box that references the Contact table, and lists just the three names in the drop down (showing the Contact_ID is optional - I'm fine either way):
Tom
Dick
Harry
When the selection is made it will populate the field Contact_Ref the table called SelectedName.
Question: When the user selects the name I'd like the data populated in the SelectedName table to be the Contact_ID Value, and not the Name, so if Harry is selected the Value "3" would be saved.
I have been looking some information on changing image based on form combo box selection on form.
I manage to do case by case but i need it in a simple code because their will be many employees just to avoid adding case by case code for each one.
Private Sub Emp_IDCombo_AfterUpdate()
Select Case Emp_IDCombo.Value
Case "AM-001"
Imageholder.Picture = "C:UsersAMGDesktopam-001.jpg"
Case "AM-002"
Imageholder.Picture = "C:UsersAMGOne DocumentsHR & Admin DatabaseEmployee Picturesam-002.jpg"
End Select
I have employees table where all images location is saved in text field and i have a combo box on form which is employee id.
Tables relationship
Employees_table [PK] to Contracts_table [FK] via field name {emp_ID}
Fields Name
Combo Box name on form Emp_IDCombo and row source is SELECT Employees_table.Emp_ID, Employees_table.EmployeeName, Employees_table.Emp_Pics FROM Employees_table;
Text field is located in employees_table called [Emp_Pic] for images location.
I have a combo box called Combo9 in form NavigationF, the combo box displays the results of FollowUpQ Query. What I would like to do is when the user selects a row from the combobox is closes NavigationF and opens ContactHistoryF and goes to the record selected in the combo box. I have made sure that the combobox contains CustomerID which is the primary key for my table.
View 4 Replies View RelatedWhen entering information into a blank form, I would like to be able to continue entering information to another additional blank form after my last entry. Is there a way to continue to a blank form after entering information into the previous blank form? I would just like to continue without having to close the entire form and then reopening another form.
View 7 Replies View RelatedHey,
I have 2 combo boxes. The first one gives a lis of Prefix letters for railcars. The second uses the value of the 1st and finds railcars that start with the same letters.
finally got the 2nd combo box to list the prefix and number of a railcar based on the 1st combo box and also got it to clear as each run-through starts.
Now that the user can select a number (ex. dfcv1234 as the railcar), I need to find the record with the prefix dfcv and the car number 1234 and load the record to the form for view and editing.
So far, I know it needs to be the after update event and have a select statement that finds the [key], [prefix], [car_number] that matches the value selected on the form but how do I use the key to make the record show on the form?
Thanks,
slh
I am designing a nomination form (web database so no vba macros can be used).
The form has 3 combo boxes: cboStaffName, cboLevel, cboNominee.
The form is bound to the tblSubmit table where the submissions are populated.
I used a select statement:SELECT Staff_List.Staff_Name FROM Staff_List; to populate the combo box for the Staff Name selection.
This is the select statement to populate the job level combobox:
SELECT Staff_List.Level, Staff_List.Staff_Name FROM Staff_List WHERE (((Staff_List.Staff_Name)=[forms]![frmtest]![cboStaffName]));
The select statement to populate the combobox for the nominee combobox:
SELECT Staff_List.Staff_Name FROM Staff_List WHERE (((Staff_List.Level)=[forms]![frmtest]![cboLevel]));
The problem is that the staff_name in the first combobox is still found in the nominee combobox which should not be because a staff cannot nominate self. There is a field in the Staff_List called YesNo that should be activated for each staff that is selected so that the select statement on the nominee combobox can be updated accordingly to remove items with the field "Active"
How to get the checkbox selected for each corresponding staff.
Sample of the database has been attached.
I'm trying to build a database for daily work. My work in daily basis I have to fill all condition for several items.
We have two areas, with two locations under each area, and three systems under each location and each system contain more than 500 items.
I created all tables and fill by all information:
1-Table 1: Area 1, Area 2, Area 3, Area 4, Area 5, Area 6.
2-Table 2: Location 1, Location 2.
3-Table 3: System 1, System 2, System 3.
4-Table 4: all items under System 1-1-1
5-Table 4: all items under System 1-1-2
[Code] ....
Last table will be LogBook which will be as follow:
date l time l area l location l system l item l Conition1 l Conition2 l Conition3
My question regarding to the form of the above table:
How can I make a combo box for area field and when I select for example area1 will appear only the locations which under area1 in location field, and when I select location1 for example will appear only the systems under location1 in system field, and when I select system1 one for example will appear only items under system 1.Combo box list will be based on the selection in previous combo box and so on.
I have created a form that searches through one of my tables, via a query, it then automatically creates a report from that query.
I want to add an option into the combo box's that is blank.
Currently if you wanted to choose by 'fault category' but accidently click on 'failure analysis', it will take the top value of the combo as the entry, you can't then blank 'failure analysis'.
Each combo box gets its information from an independent table.
The only think I figured out what adding the refresh button which just closes then reopens the form so all the fields go blank.
Access 2007
Inside main form f_order
I have a subform f_filter_nycklar
with only one column [Serie nr].
A list of unique serial numbers.
10001B
10002B
10003B
... to
99999B
The subform is based on q_filter_nycklar which in turn is based on tbl_filter_nycklar
I have two unbound combo boxes both based on tbl_filter_nycklar. I want chose starting number [ex 14001B], and end number (ex 14050B) and the subform to filter all numbers from first to last based on that selection.
I later want to copy this selection and past append into another subform on the same main form.
I have tried to set condition in q_filter_nycklar
>=[Forms]![f_filter_nycklar]![F] Or <=[Forms]![f_filter_nycklar]![T]
It does not work
-With condition blank the combo boxes list all available numbers and the subform continuously lists all numbers
-With condition the combo boxes list all available numbers but subform is blank no matter what I chose in the combo boxes (including leaving blank)...
I am having a problem entering the 2nd column of a combo box.This is a lookup combo looking at a table called Accessories. The combo is looking up 4 columns in the table, the first column is called "Action" the 2nd column is called "Item". I click on the combo box in the form and decide on the action I want and click that row, it then enters the action I have clicked. But it is the "Item" column I want to enter on the form not the "Action" column.
This only works if I make "Item" the first column which I do not want to do. I want to keep the combo columns in the order they are but enter the 2nd column not the first. I have tried making the bound column the 2nd column but it still enters the 1st column. I am sure access must be capable of doing this but I cannot work out how. It seems you can only enter whatever is in the 1st column.
I'm trying to create an access database to make an inventory of my model trains.
I have a main entry form (frmTrain) where I enter all sorts of info regarding e.g. a locomotive. This info is then stored in a table (tblTrain).
In the main entry form, I've put a combo box (cmbCountries) linked to a query (qryCountries) which queries the country codes from a table (tblCountries) that has three fields:
ID (autonumber)
CountryCode (short text) (containing the country codes UK, FR, DE, ...)
FlagFile (short text) (containing the name of the flag picture, e.g. UK.png)
The flags are stored as *.png files in a folder Flags that is in the same folder as the database file. I have chosen this approach instead of putting the flag pictures in an OLE field in tblCountries because I'd like to avoid being stuck to *.bmp files (don't support transparency). I'd also like to avoid having to mention the complete file path in the field FlagFile
I created a form (frmCountries) to easily add countries to tblCountries as needed.
Now back to the main entry form. The selection made in cmbCountries is stored in the field 'Countries' in tblTrain. When a country is selected in cmbCountries, I'd like that the corresponding flag is displayed next to the combo box.
I found an example on the web where an image field was used to display the flag, let's say with the following code:
Private Sub cmbCountries_Change()
Me.ImageFieldName.Picture = Me.cmbCountries.Column(2)
End Sub
Private Sub Form_Load()
Me.ImageFieldName.Picture = Me.cmbCountries.Column(2)
End Sub
and where the combo box had as row source (not using qryCountries):
SELECT tblCountries.ID, tblCountries.CountryCode, [Application].[CurrentProject].[path] & "Flags" & [FlagFile] AS Expr1 FROM tblCountries ORDER BY tblCountries.[Code];
The problem with this example is that, if you select in frmTrain e.g. UK, the UK flag is then displayed across all records in frmTrain. So the image field is not the appropriate field to display the flag in frmTrain and I guess an unbound/bound (?) object frame should rather be used.
How to display correctly the flag picture for every individual record in frmTrain corresponding to the country chosen in cmbCountries.
I have a form that contains a form (Contain business data) and a then a sub form that hold the companies history of donations. BUT I also have another forms that hold miscellaneous data that I would like to look at also in the sub form area.
I want to select the sub form by a combo box to show the "sub forms"I want to look at by selecting a menu from a combo box.
I have worked with Access for years but some reason the combo box has always been difficult for me to completely understand.
I have created form with multiple tables field in some of these fields I have assigned the combo box selection the total combo boxes in form is four and all are unique numbers but this form is incomplete.
1.When I select or update any of four combo box then remaining combo boxes and fields on form should be updated automatically with related records.
2.I need to bring calculated fields from multiple queries on to my current form .how I can insert query fields in to form...
I am trying to auto populate the text boxes in the form based on drop down from the combo box. As you can see in the form Frm_Input, this works fine for FL, but for some reason it will not populate for Skill, Role, FLM and Location. The table it is linking to is Tbl_Names. Why as I have changed the column source?
View 8 Replies View RelatedOn my unbound form I have a combo box with a record source type set to value list and the record source with two choices in it. I would like the combo box to reset back to either blank or a the phrase "select one" once a record is saved. If it shows "select one" I do not want the user to be able to actually select that. As I said the form is an unbound form and I have used the coding of "insert into" to save the new record to a table. I have been able to clear the text box on this form when the new record is save by resetting it's value to "" but have been unable to reset the combo box to blank.
how do I reset the combo box through code after a save to display nothing - or is there a way to add a non-selectable choice to the list and have it display when the form is refreshed.
Hello,
I have an unbound combo box in the header of a continuous form. The box is set to value list, and when you select a value, the recordsource of the form is changed. This works fine.
However, if I there are no records in the underlying form, the combo box is blank. If I check the value in the immediate window or the after update, I can see that it is set properly and contains a value, it just doesn't display it. I am using Access 2000. I have tested on Access 2003 and cannot replicate the problem.
I have found one post here (http://www.access-programmers.co.uk/forums/showthread.php?t=84423&highlight=combo+box+blank) on the topic.
I found this (http://support.microsoft.com/default.aspx?scid=kb;en-us;287478) article on Microsoft which has my symptoms, but I am not opening a recordset.
Anyone know how to fix this??
I have built a database which has a number of forms with a frm_PartNo subform in.When ever I click a button to load one of these forms I get the following error message: ECN Database v1.31 cannot find the referenced form 'frm_PartNo'. But when the form loads the sub form is there with all the related data !
View 5 Replies View Related