I've set hyperlinks to a couple of forms using the hyperlink address in properties. All works fine, and I've done it this way because the cursor changes to pointy hand when hovering over.
However, I need to navigate to a tabbed form in a main form.
Is there a way of doing this? I've been searching all sorts, and the most probable is to concatenate the destination?
description##Page1#page2... or something like that?
Is this correct?
What ever I've tried doesn't work, this includes ...
adding the main form destination to Hyperlink Address, and tabbed form in the SubAddress (Can't find main form)
Using the hyperlink builder. (Can't find anything)
everything has been working perfectly except for date diffs.I am simply using an unbound text box with a date diff as a calculator of sorts, which meets the form's purposes. Everything works fine when the two dates are on the SAME tab using the formula ' =DateDiff("d",[DOB],[date of treatment]) ' entered in the textbox.
The number of days between treatment and DOB pops up immediately.
However, when trying to create a second date diff between two source text boxes on SEPARATE tabs, (i.e. DOB on Tab 1, and date of treatment and the unbound date diff calc box on Tab 2) the date diff does not work unless the form is opened, and closed again. As in, the only time the number of days pops up is if the form is closed and opened again.
I have a form which consists of four (4) tabbed sheets. The first sheet is the main form and the other three sheets are the linked subforms.
Pressing the tab key on the keyboard navigates from field to field in each individual form; however, I would like that when I get to the last field of each form, pressing tab moves to the next sheet or the first field of the next subform.
The problem I am getting is that when I get to the last field of the main form and/or subforms, hitting the tab button creates a new record in the specific form, which I do not want. I want to just tab to the next subform.
I have an unbound form with 2 tabbed Controls on it.On the first Tabbed Control my command button code works but not for the 2nd tabbed control. Although the command buttons themselves work as far as going to the appropriate record.
What I mean by this is that I use code to enable/disable the command buttons depending on what record you are on.
Example: If there is only 2 record, the other command buttons will be disabled, Do I have to refer to the Tab Control ?
I have a tabbed form built in Access 2007. It's a series of about 32 different questions, with some being fill-in, some drop down boxes to select from, some radio buttons to choose a rating from 1 to 5. The reason I used a tabbed form was just to keep things consolidated on one screen where no scrolling was involved. All of the entries on each of these tabs are deposited into the same single table. I have 7 tabs, and all of the fields on the 7 tabs compose a single record in the table.
I have the actual tabs hidden, and instead use a button to switch to the next tab (Continue button at the bottom) once all the fields on that tab have been completed. I have all of the necessary fields set to be required, but Access does not validate the entries until the very end of the survey when they click a 'submit' button that actually saves the responses and returns to the opening splash page to start the survey again.
What I want to happen is for the fields on the current tab to be validated before it lets the user move to the next tab with the continue button. If they click continue and have left any fields blank they should get a message that all required fields must be completed or something similar to that.
I have found a thread here entitled "Form Validation before Moving to another Tab" which sounds similar to what I'm doing, but using the button method to navigate to the next tab, there is no BeforeUpdated event to assign that code to.
I made a form for our office to search data through our MS Access database. It was a big hit, and people started using it. Then came another request to make a new form - to search through another few tables. This was a big hit too.
The same process repeated and now I am stuck with 3 different forms, each with it's separate code and selection options.
How can I combine all of them into one and have 3 different tabs for the 3 existing forms without losing all the coding and software flow that I have already created?
I am modifying an existing form that has some tabbed pages(subforms) in it and I am wanting to know how to add another page. I have created another subform that I am wanting to add to this main form as another tabbed page.
I have a navigation form that has a tabbed form on one of its tabs. The tabbed form has a 'current client' query record source and allows one to choose from a list of current clients and when a client is selected - details relating to client are displayed on various tabs on tabbed form.
I want to duplicate tabbed form and change record source to a query selecting 'exited clients' so I can see same information but for exited clients.
I have created a new tab on navigation form for my new exited clients tabbed form and changed record source by creating a new exited client query but when I change record source on exited client tabbed form it automatically changes record source of current client tabbed form to the exited client query and visa versa.
How to set a single form's property to act as it's own "overlapping window" in a database that is set to use tabbed documents. I want most windows to have the tabbed layout but there are a few that I would like to have pop out and be their own windows.
I noticed that the Northwind database did this somehow. if you click on one of the products from the home screen a form pops up in its own window. I tried reverse engineering it, but no luck so far.
I'm creating a tabbed form in Access 2007, and in the first 3 tabs, when I dragged the field controls onto the form, they stretched to the width of the form and all stacked nicely underneath each other.
Now on the next tab they are coming out as much smaller. I don't want to stretch them to fit as I want them a uniform size and I just want to find how to get that setting back! I've been messing with the anchoring buttons to what seems like no avail!
I am investigating on the possibility of setting up an approval process for our employee intake procedure by using MS Access and Outlook.
The idea is for the requester to open an intake form in Access and fill in the new employee's information and send an Outlook email to the manager for approval. I know how to trigger off an event on the form to send an email to the manager but my challenge is how to create a hyperlink in the email for the recipient to directly open the intake form with the specific record, without the need to open the database and find the specific intake form.
The intake form is built in a frontend .mde file on a shared drive where all users have access to.
i have a table of calls, with a field called "link to file".
i have a form where staff fill in their calls and when they have completed the call there is an option to insert a hyperlink to where the file is stored.
i previosuly had an attachemnt there but the database would just grow and grow so now its prefered there is a link to where the files are kept.
i just dont know how to set it up, i have tried adding in a text field and setting it to hyperlink which does work but on the form the user has to right click the button and edit hyperlink to place it in - is there an easier way of just clicking the button and it brings up a folder location where you select the file and it saves it as a hyperlink into the table under linked to file?
I am trying to limit the number of records displaying in a subform [amendedLoans] by selecting only those records that have the same ClientID as the mainform [Customers] and the same loan number as the subforms parent form [ClientAccounts loan changes].[loanno].
I have no difficulty selecting records just using the clientid but as soon as I add the reference to the subform [loanno] field I get no selection of records. I suspect there is an error in the where clause for [Amended Loans].Loan)=[Forms]![customers]![ClientAccounts loan changes].[Form]![LoanNo]) .
I have built the clause using the expression builder and have had many attempts all ending up with the same result. I'm now at a loss as to where to go from here....
I have 7 tabs on my frmQuestions. They all the same layouts (see attached). Each tab has its Save_Button (e.g. CmdSave1, CmdSave2, ... ,CmdSave7). I do not want to write the same procedure on each CmdSave1_Click(), CmdSave2_Click() ..., CmdSave7_Click(). Are there any alternative ways to do this such as concate the string or ?
When I load my tabbed form, it always scrolls it down a bit and cuts off the tab. The user has to scroll up to show the tabs. I have tried any number of things and cannot get the form to open with the tabs showing. Is there a setting I am missing??
I'm not a complete Access beginner, but I'm also far from an expert and not much of a programmer. So I feel that there's a chance this might be a relatively simple issue I'm merely making more complicated than it should be. But hopefully someone can at least point me in the right direction. (For the record, I'm using Access 2007.)
I've created a form to which I've added three tabbed pages. Each of these pages contains a subform the user can use to enter data into three different tables. The tables' relationships look to be set up properly, and there doesn't seem to be a problem with typing the information into the subforms. However, I want a single button press to update the information across all the tables and clear all the fields in the subforms so that the user can then go about entering the next person. I can't seem to figure out how to do this.
I downloaded a number of template databases from Microsoft, and some of them have exactly the kind of functionality I'm looking for: a "Save and New" button that inputs all the data across the tabbed pages and then lets the user start over from scratch with blank forms. I've spent a fair amount of time studying the various forms in the Student template, but I'm having absolutely no luck replicating that functionality. I basically want everything to work almost exactly the same as that, except with different field and table names (of course).
Can someone please explain what I'm doing wrong and how I might fix things, or at the very least how to look at the Students template database to get the information I need on how to do this myself? I'd be very grateful for any help on this matter. Thanks.
Public Declare Function LoadImage Lib "user32" _ Alias "LoadImageA" _ (ByVal hInst As Long, _ ByVal lpsz As String, _ ByVal un1 As Long, _ ByVal n1 As Long, _ ByVal n2 As Long, _ ByVal un2 As Long) _ As Long
[code]...
I can load the little icon on the left on CaptionBar.It works very well on overlapping mode but no on Tabbed documents. How to works with tabbed documents mode?
I am very new to Access and am designing a multiuser database with tabbed forms. One of the tabbed forms has 7 tabs; the first tab contains the part number and other information about a product and the remaining 6 contain additional information about that product. Is there a way to have the part number field/control remain visible when the user changes tabs, ideally without using VBA?
If I have a tabbed from of say 3 tabs, can I use each tab to populate 3 different tables or can each tab only populate one table, hope this is clear.
I have 3 tables
a) General b) Process Design c) Mechanical design
By putting the tabbed form on a plain master form, I have to select one table for the record source for the master form, thus it would appear is the only table I can populate. :confused:
Hi folks, I've got a questionnaire which has about 80 fields in 5 sections. all sections are linked to a person Id - which is the unique identifier.
I'm thinking that a tab form is the way to go in putting this form in Access in order to facilitate data entry. Is this the best way or is there another way to accomplish this task?
Does anyone have a sample form that I can modify to meet my needs?
I have a Tabbed form where one of the tabs shows about 20 rows of a table. Another tab shows a single record from that table with all the fields for that record.
I want to be able to move from tab to tab and and stay on the same record (hopefully that's clear).
