Statement below will increment a numeric field by 1 without using Autonumber.
[Invoice Number] = Nz(Dmax("Invoice Number", "Invoice Transaction Header")) + 1
This was to be applied Before Update under the event of Invoice Number.
I urgently need to generate sequential numbers (not unique - duplicates are needed as & when) via an Update Query for one field in all my rows for an Access table .. I want to call this field SalesReceipt
Another field on the same row called 'OrderID' will be the field to 'test' against (this field value is populated via a CSV import)
I need the check/logic to be along the lines of.....
If the OrderID value of this row is exactly the same as OrderID value of the row above, then don't auto increment the SaleReceipt number ....if the Order ID of this row is different to the 'OrderID ' value in the preceding row...then increment the SalesReceipt number.
How can I go about this? Essentially I need to test against the value of a field one row above against the same field in the present row....can this be done in access (perhaps using the primary key as a way of looking up the row above...becuase the primary keys will always be one number apart between rows?)
The way I've been approaching such sales receipt number generation up until now, in Excel the formula I used was this....
=IF(A3="","",IF(A3=A2,B2,B2+1)) Assuming data to be tested against started in A2, then In B2 type '1' (this being the first sales receipt number). In B3 past the formula & drag down.
But I really need to achieve the same via Access...
I have an autonumber on my table to assign each record a value. When the user hits cancel, the form doesn't save -- which is great -- however, I noticed that when I create a new record, I noticed that the autonumber still incremented. Is there a way to prevent the increment if the user hits cancel and exits the form?
Example: Record_nmber =40 and user hits cancel; next form the record_nmber is 41. I want it to be 40 since that record number was never created.
I've got most of what he wants sorted but this last task I am completely flummoxed. All of his projects are allocated an ID (named Project Reference), starting from P010010 and increasing by 1 each time. I've made a form that allows a new project to be recorded by entering all the details and hitting the 'record' button, but he wants the Project Reference field to be automatically filled in each time (understandably), increasing by 1 from the last record.
So if the last record was P010311, then when the form opens the Project Reference should automatically be P010312.
I've looked into this and found many guides talking about DMax and DIM and strCriteria and whatnot, but no matter how many of them I follow and try to adapt to my own database I can't get it to work at all.
The table the ID comes from is called General, and the field is Project Reference. The ID should automatically be filled into a text box called txtRef whenever the form opens and a button to add a new record is pressed, being 1 higher than the previous ID.
Hello- I am trying to create a database for a non- profit. They have events and workshops and want a numbered field for each entry in their registration form. Seems like a simple thing to do, but Im not figuring it out. Is there anyway to put an unbound field in a form that will autonumber each entry?
Thanks for any help!
I have two tables linked to each other in one to many relationship. Instead of auto number, the date and shift (Text) is being used as the primary keys (Composite Primary Key). Here is the tables structures,
Payouts Table:
Date: Primary Key
Shift (Day or Night) : Primary Key
Bills Table:
Date: Primary Key
Shift (Day or Night): Primary Key
Autonumber: Primary Key
The tables Payouts and Bills has one to many relationship. One payout row can have many bills. The problem is that I want to start the Autonumber in bills table everyday from 1. As date and shift are different for every day so even if i start bills from 1 everyday, it wont make same primary key. I can do it manually but I want to make it automatically.
I created a database of "My Cars", "Television", and "Wines" and a Trouble Reports(TR) for each. I have a field TR on each and for now a user can fill it up with number i.e first TR is 1, second Tr is 2 etc etc. I want it automatically filled automatically not manually. However, I want it to do the same for "Television" and "Wines" when I write Trs on them. I am a rookie and I dont know how to do it I attached a copy of the db I created.
View 2 Replies View RelatedAuto number will not work for what I want to do. I am creating a simple database that will assign the user with the next incremental number in a field. The intent of the database is for the user to enter three text fields and then obtain the number. I believe that Dmax would work but do not know how to make populate the table.
View 10 Replies View RelatedI have written a code to look up by the unique reference number rather than use the wizard to avoid this error happening... The field is restricted to list only so you can't actually edit the number.For ease of use you cannot scroll by record and I need to filter by the ID. Is there an easy fix to this combobox?
Would creating a seperate query work? Is there another lookup code I could use where I don't need to have the combo box bound to the ID field since it's not being edited anyway? I had a go at one and although it would now let me select it wasn't updating the record, tried a few ways but it seems that it needs to be bound to the field.
i have 2 field "CLIENT ID" and "CLIENT CODE". when i post a new record, i want the "CLIENT ID" and "CLIENT CODE" to merge to give me 1 field "CLIENT". the CLIENT CODE should be prompted for eg. THO or BLT and added to the CLIENT ID which will compose of 001 or 002. The CLIENT ID should also increment when each new CLIENT record is posted.
The example should make things clear.
CLIENT ID CLIENT CODE CLIENT
001 THO THO001
002 THO THO002
001 BLT BLT001
it should look up the last CLIENT value and then for the new record just continue on the previous entry.
Hi
I have a numeric field called FileNo and an autonumber field called FileID in a table called tblFile.
I also have a lookup numeric field called FileTypeID (with values 1 or 2 or 3) on another table called tblFileType.
I need the value of FileNo which I am showing on a Form frmFile to change dependant on the value of the FileTypeID
i.e. If FileTypeID = 1 FlieNo should start at 100
If FileTypeID = 2 FileNo should start at 200
If FileTypeID = 3 FileNo should start at 300
Then when I create a new record I need to increment by 1 the value of FileNo according to the FileTypeID
I've setup a button and attached this code to its onclick event but it only works as long as I don't change the FileTypeID
Dim B As Integer
Dim H As Integer
Dim N As Integer
Do While FileID > 0
DoCmd.GoToRecord,,acPrevious
If FileTypeID = 1 Then
B = FileNo
Else
If FileTypeID = 2 Then
H = FileNo
Else
If FileTypeID = 3 Then
N = FileNo
End If
End If
End If
Loop
DoCmd.GoToRecord,,acLast
If FileType = 1 Then
FileNumber = B + 1
Else
If FileType = 2 Then
FileNumber = H + 1
Else
If FileType = 3 Then
FileNumber = N + 1
End If
End If
End If
ViRi
Here's my query:
SELECT units, nation, unique_brigades,
Switch ( [unique_brigades]='A', 2000, [unique_brigades]='B',3000, [unique_brigades]='C',4000) AS brigade_number,
unit_urn_desc AS urn_desc
FROM units
What I'd like to be able to do is increment the values (2000,3000,4000) by 1 for each new row. Does anyone know a way to do this?
I have a table with order numbers I would like to auto increment the number part of the order when new record is added to the table.
My order numbers looks like this:
UZSK-0001
UZSK-0002
UZSK-0003
UZSK-0002
How to make access increment the number part?
I have a table called tblProducts. Within the table I have a field called versionNumber. I want to update the version number to increment by one each time I run a query.
So if the version number is 1 after running the query it becomes 2. So far I have done the following:
CurrentDb.Execute "UPDATE tblProducts
SET tblProducts.versionNumber = "Need to increment by one, don't know how to"
FROM tblProducts;"
Please advice me how to implenent the Update query.
Thanks,
Ket
Basically, we have different camera modules on which we perform a given test a number of times, giving rise to 2 tables, tblCamera which will store basic info about the module and tblTest which will hold info for each test perfomed.
The camera module has a unique ID (CameraID, the Primary key in tblCamera and foreign key in tblTest (one to many)). The primary key in tblTest will be a compound key of CameraID and an incremental number for each test performed on a given camera (TestNo). The data for the tests will need to be entered through a form, so I can build a form based on tblCamera with a subform based on tblTest (which would be in datasheet view)... What I am looking for is a way to increment TestNo in the subform, starting at 1. I have tried using
=Nz(DMax("TestNo","tblTest","CameraID = '" & [Forms]![frmCamera]![txtCameraID] & "'"),0) + 1
in the Default Value box for this field, which works to a point but has the curious effect of adding each number twice (as the default value for a new record seems to be added as soon as you start typing in the current 'last row')
I just can't seem to get my head around this one, any suggestions would be much appreciated...
Thanks,
Bogzla
I have a field in a form that contained 8 characters long (Ex: ZWXX0001). The first 4 character always stay Constance. However the last 4 characters I'd like it to increment by 1 after each time user press enter to go to the next record when they do data entry. If this possible will save my user a lot of time. For Example: ZWXX0002, ZWXX0003, ZWXX0004 . Is this possible? Thanks in advance..
View 13 Replies View RelatedI have a form that is being used for sample submission. Ideally, the user will be able to put in some information (3 or 4 fields) and the number of samples that they're taking, click the arrow and it will insert that number of samples into a temporary table that is then displayed on a continuous form. From there, they can edit samples, add more samples, and generate a report to submit to the genotyping group. Once their sample list is final, I will append it to the master list and clear the temporary table.
I've got the basics working. A looped "INSERT INTO" using a counter inserts the relevant information. I cannot, however, seem to get the numbering field to work.
Ultimately, the numbers need to look something like MySample-001, where MySample would be one of the other fields. Incrementing the 001 is the problem. In another situation in the database, I can successfully use DMax+1 to assign a single number on a single form, but I can't get it to increment the sample numbers.
Ideally, I'd like it to happen when the form is generated. However, I'm also open to having them assigned when the sample list is finalized, before inserting into master table.
I have inherited an Access DB that is supposed to be kept "alive" but not made much better. On a weekly basis I get an Excel CSV that I'm supposed to import into one massive table; that works just fine.
However, there is another query that takes values from a table named "New Users From Import Table" and appends them to the current "User" table.
But before running that query I have to manually update a field called "Display Name ID" with the next highest number from the User table but only the highest value that isn't in the 9000 number range.
For example, my next highest "Display Name ID" is 1144, which of course does not include the records that range between 9000 - 9008.
I had to manually enter 89 "Display Name ID" values yesterday and I know there has to be a way to update that field when I pull the data over from the temp table without having to do it all manually.
Here's the query that pulls the data into the "User" table (after I've manually entered the incremented values).
INSERT INTO Users ( [Display Name ID], [User Type], Organization, [Display Name], [Alias Name] )
SELECT [New Users From Import Table].[Display Name ID], [New Users From Import Table].[User Type], [New Users From Import Table].Organization, [New Users From Import Table].[Display Name], [New Users From Import Table].[Alias Name]
FROM [New Users From Import Table];
how to auto increment one field based on the value in another field. What I have is a table with six fields. There is a foreign key assigned to each record and linked to another table. Four fields in this table are number fields indicating accordingly a number for a category, a number for a subcategory, a number for a subject for a subcategory and a number for an instruction for each subject of subcategory. The last field is the text field for each instruction. Numbers are required to be included in the report. Also, number of categories, subcategories, subjects and instructions vary by each record in the the table which this table is linked to. What I'm trying to accomplish is to have numbers in the subcategory to auto increment starting with "1" for each number in the category field, numbers for each subject field would auto increment starting with "1" for each number in the subcategory field, and numbers in the instructions field to auto increment for each number in the subject field starting, again, with "1". I also need these numbers to restart with "1" for each new record in another table.
Basically, the table would look like this:
cat subcat subj instruction
1------1-------1------1
1------1-------2------1
1------2-------1------1
2------1-------1------1
2------1-------2------1
3------1-------1------1
3------1-------2------1
1------1-------1------1
(if the record in another table is a new/next table)and so forth..I have been looking for anything that could remotely work for me. Every VBA code I've tried is either don't work the way I need it to work, other codes making the field to continue increment numbers if the number already exists in the other field.
I'm making up a stock system for the independent jewellers I work for. Each stock pattern needs an individual code which can quickly be recognised read as tickets are often taken off the jewellery and can be mixed up easily. To this end we categorise based on two criteria:
1. Material
2. Type
At the moment these are as follows:
MATERIAL
IDMaterial
0Base and Miscellaneous
1Silver
2Gold
3Palladium
4Platinum
5Pewter
TYPE
IDStock Type
0Previously Owned
1Ring
2Pendant
3Chain
4Necklace
5Bracelet or Bangle
6Earrings
7Brooch
8Gents
9Gift, Clock or Miscellaneous
So if I had three pairs of silver earrings I want the first to be No. 161, the next 162, the next 163. If I had three Gold Bracelets I'd want them No. 251, 252, 253 and so on...Material and type are both selected form separate Comboboxes on a form.
I am attempting to update an oracle table using MS Access.
One of the fields to be updated is a primary key number field.
I'd like to use the autoincrement field to update that field.
My sql is:
Code:
Alter table testAutoNum Add column progid autoincrement (1001,2)
This sql nicely creates the new field in the table, but it doesn't start at 1001 and increment by 2; it starts and 1 and increments by 1.It is also creating an autonumber and I need it to be a number.
What am I doing wrong?
Is it possible to run an update query to increment the value in a lookup field on all records, if the values are not numerical?
For example if the look up field contains Unit A, Unit B etc? can a query be executed so that anything with Unit A will be set to Unit B, and Unit B records will be set to Unit C?
I have a database that is used for tracking changes to numerous courses. Part of this database create a unique tracking number for each course problem developed. Currently I have the form do a comparison using the highest most number to compare against the current number assigned and prevent the form from saving until the number is incremented and not a duplicate, it would be a lot easier if I could just have it increment plus 1. I have seen various answers but they all seem to depend on the alpha portion of the field being a set value, in my instance it is variable in length. The only part that is fixed is the last four characters to the right which are the numeric portion I would like to increment. For example the field can equal:
QACP-M-PIQ-6059
QACP-M-PREF-6002
how to extract just the numeric portion, increment it by one and save?
For Example: I have a field, let's say called Hours set to Data Type Number and Double format.
The user should only be able to enter time in 1/4 hr increments.
1 hr or 1.25 or 1.5 etc...
How do I increment record id like given below:
2014/1
2014/2
2014/3
And when year ends
2015/1
2015/2
Like other posters, I need the default value to be the last value plus one. I am using a subform, and the field I need to increment is ITEMNUMBER for items that are ordered for a specific project.
It is acceptable to me to replace ITEMNUMBER with 1 for the first item, I just want it to increment after that.
Clearly the use of DMAX in this situation will not work as ITEMNUM would continue to increment so that any given project might have ITEMNUM values as, for instance, 357-363 when it needs to be 1-7.
BTW - if I could use the maximum value I would set the default value of ITEMNUM on my form as:
(DMax("[ITEMNUM]";"Projects"))+1