Forms :: Limit Number Of Records That Can Be Accessed In A Form
Mar 14, 2014
I have a database that has transactions since year 2009. I want the users to only be able to view and edit transactions that were entered in the last 6 days. I was initially able to do this by putting a filter in the Property Sheet section of the form and choosing Yes for Filter on Load.
However, a user was able to discover that by clicking on Clear All Filters, the filter I set was also cleared, thus making them see all the transactions beginning year 2009.
I am new to Access and I am developing a form. I have already read and found useful resources on internet but there is something I am not able to sort out.I have seen that the limit of fields I can enter in Access is 255 and my survey is far below that number.So no issue at all when I created the fields in Data view.However, the issues started when I created a form.
I created a form by Create>Form.The last few fields, at the very bottom of the form, are squeezed onto each other as if there was not any space available. Is there a limit to the number of fields I can have in a form? There should not be if I am allowed to enter up to 255 fields. How can I go about it? Should I alternatively create 2 forms? I would rather not to though.
My problem is the following: when I receive say 5 computers in a purchase form, I want to register the serial number of each of them in another form, bound to another table.If I receive 2 units in the purchase form, my user should only be able to input 2 records in the serial form (a continuous form), if we receive 3, then only 3 records,I cannot quite figure out how to build this second (serial number registration form), so that it refuses input after the correct number has been reached.
Is there a limit on the number of records you can have in an access database? I've got one with 8500 records and it's been a PITA! I have a webpage on our intranet so users can go and enter their information to it, and they get a nasty error whenever they try to enter information. I'm trying to figure out why and i was just wondering... i know it's not the webpage because when i connect it to my test database it works fine? so i dunno :confused:
Hi All. Is it possible to limit the number of records in a form, to a number given in a linked form.
For Example.
tblA StreetName No_Of_Houses
tblB Name Number
I would only want the number of records in tblB to be the same as No_Of_Houses in tblA. I have seen previous threads where you can limit it to a number, but do not know where to go from there.
We have a database with one main data entry which stores records in a seperate table. There are several thousand records keyed in using this form. Therefore, alongside the entry we have a search form which allow the user to search for a specific record and display it in the main if he/she needs to edit one.
We have received a request from users for a functionality which allows users to browse all records, using the main form layout, that they have keyed in. I guess what I am asking is: Is there a way to limit the records visible in a form using field on that same form as a limitation (ie. the users name - which is a required key-in)?
I am looking for a way to limit the number of rows that are added to the subform of a main form. Is there anyway that the allowable number of rows be defined using a field on the main form.
Ok, not sure if this is even possible or where to even start..
I've got a form that has all the info for a client, eg.. Client First Name Client Last Name Client Hours Client WE/CS/EE Client Day And Times Client Phone Client Comments
Begin Date & End Date (2 boxs) on there for date input..
and what i'm trying to do is limit that any date entered between begin date and end date, it'll check and make sure there is only ever 20 clients on any 1 day..
i thought Datediff would be the way to go, but then again how do you get it to search each day and make sure theres only 20 clients on there..
Is it possible (without using VB) to limit the number of selections a user can make in a multiple value list?
My list is one a form and when in the form field it brings up a total of 15 names with checkboxes, allowing you to "check" each name you want. However, I want to be able to have as many names as I need in the list, but limit the user to selecting only two of them.
One shows my form with the Transporters Subform with 3 entries, and 1 entry.The three line items that say "Transporter" are in one subform. I used this code
Code: Private Sub Form_Current() If Me.RecordsetClone.RecordCount >= 3 Then Me.AllowAdditions = False End If End Sub
to limit the number of records I can add to 3 or less.My issue is that I lost the blank text box that allows you to add another record. So, if I only have one Transporter listed, there's no box to let me add a second or third.I have the following properties for the Transporters Subform set to "Yes":
Data Entry Allow Additions Allow Deletions Allow Edits Allow Filters
I have a form I created in the past that auto-fills some of its fields based on the user's selection of a record from a combo box linked to another table. The form has been working perfectly however I recently tried to add a couple of more fields to the form that need to be autofilled. I added the new fields to the source table and added columns to the combobox that should allow my VB code to fill those boxes. However only one of the new fields is filling correctly. After trying a few different things I notice that the problem seems to be with whatever data field becomes the 21st column in the combobox. Is there some sort of limit on the number of columns contained in the data source for such a box?
Is there a limit to the number of fucntions/suroutines in a Form's module. I got an overflowerror when compiling and I moved a fucntion from the Forms mdoule to another module and the error did not re-appear.
I'm in the process of creating a database in Access 2010 that has two front ends, basically. What I want to be able to do is lock out one of those front ends for a specific period of time every day.
I was wondering if someone could point me in the direction of how to have a form open to the record it was on when it was closed. I know I've seen how to do this before, but I've spent some time searching and I can't seem to find it again.
I have a form with Continuous Records as its default view. I would like to number the amount of records displayed on screen to about 5 or 6 at a time instead of having them scrolling right off the bottom of the screen. Is there any easy way to do this? Thanks
I can't get this to work! I have a module for it and I think (?) the correct code.
'Limit Records On Subform. OnCurrentEvent of Main Form ' Main form is frmTimeCards LimitRecords Me.frmPayrollEntry.Form, 7 ' Allow at most 7 records Scenario: Main Form/Subform Subform is a Continuous form. Enter Payroll via Subform Via Combo, select a Employee on Subform Enter Hours Finish,Select a New Employee Using CarryOver for Employee
Problem: Can't add new Record for a new Employee.Because of the Limit Records Code.?
In the form frmOrders of my database i have a combobox where i can choose a ClientID and the dropdown list shows me all the clients in upgoing order with their related orders in descent order.But the drop down list doesn't show all available clients. The two hundred heighest clientnumbers aren shown. However if i type one of these clientnumbers in the textbox of the combobox, the client is found.If i go to the property sheet of the combobox and activate the query that serves as the recordsource of the combobox, all clients are shown!!!I control of the records of these clients in the table Orders, doesn't show any difference with all the other records.What can be the reason for these behaviour. Is it a question of a limit of records that can be shown via a combo box?
HI I am creating a booking system. I would like to have a form that only shows 10 records for each event. As this is the max number of people that can attend at any one time. How would I go about this. do I use single form, continous for or what ? thanks for any help paul
I need to create a census report from the employees we serve and their dependents, by company. I have a union query of the Employees table and Dependents table to put them all on one list, then a form where you can type the name of the company you need, with a button that opens the report. This works great, except for the fact that sometimes we don't need the dependents; if a company has over 100 Full-Time employees, we only need the employees. I've added a check box ([IncDep]) on the form, asking the user if they want to include the dependents, but I don't know how to get this to filter the report. I have a Relationship field on the tables that specifies an employee as a "Subscriber", so I'd like to filter the report where [Relationship] = "Subscriber" but I don't know how to do this. The union query specifies both Employees.Relationship and Dependents.Relationship to the text box [Relationship], but when I do something like
Dim stDocName As String If Me!IncDep.Value = False Then stDocName = "Census" DoCmd.OpenReport stDocName, acViewReport, , "[Relationship]='" & "Subscriber" & "'" Else stDocName = "Census" DoCmd.OpenReport stDocName, acViewReport End If
I have a form containing 4 text Boxes txt1, txt2, txt3 and txt4
I want
txt1 show records from table empDetail having age between 18 to 25 txt2 show records from table empDetail having age between 26 to 35 txt3 show records from table empDetail having age between 36 to 45 txt4 show records from table empDetail having age between 46 to 55
Is there any way to highlight duplicates across a number of records on a continuous form (conditional formatting I presume)? My continuous form is filtered on load to show only the records relating to the specified date (specified before opening the form), and there is one field that I would like to highlight if there is a duplicate value in the same field on another record on the form. Is this possible?
I have a question on number of records displaying in datasheet view on a form. Is there a way to limit the number of records showing on open.I have a command button on a Navigation form that opens a frmEnterPartsOrder using a Macro.
I have set the Macro to OpenForm, View Datasheet then GoToRecord, Record New..Works perfectly, but it does open the form and fill the screen with records, putting focus on the "new" record at the bottom of the form. Is there a way to set it to open this form, but only display say last 10 records and then focus on "new" record.
