I have a form with four combo boxes on it, the four boxes all open the same form and return a record based on the selection from a different column from the same query.
To make it work smoothly I think I need to make it so it is only possible to enter data in one combo box at a time. I could also do with some error handling.
What I am trying to do is create a data entry form to an "order table" using 2 cascading combo boxes. I have created a data entry form based on a query. I can't get the cascading combo boxes to work properly.Here is the code:
Private Sub Combo0_AfterUpdate()
Combo2.RowSource = "SELECT L2_ID,L4_Element_name,L5_Category FROM qry_ord WHERE L3_ID = Combo0.Value;"
Combo2.DefaultValue = [Combo2].[ItemData](0)
Command4.SetFocus
End Sub
[code]....
In my database I have the following:
tables
-course
-programme
-trainer
-trainercourse
relationship
-trainer to course (many to many)
-course to programme(many to one)
I have created an input form to add new trainer. In the input form i have combo box to enter trainer's course n trainer's program.
Each time i save a new record. A new data is created in the course and program table. I dont want that to occur. I want the data to be saved in the trainer query with the existing course and program.
I want a combo box in a form for data entry. Is the best method in doing this creating a new combo box in the form and linking it to a table, or using a lookup field in my table?
View 14 Replies View RelatedI'm trying to create a Data Entry only form based on a small table called tblProject.
It consist of the fields Project_ID, Artist_ID, Project_Name, and Project_Notes.
I used the wizard to get me started and i know how to change the form to data entry only, but the problem is the vague data in the Artist_ID control. It shows up as a number, because it is an FK to another table (tblArtist) where more details on the artist are held. (including Band_Name)
I want to be able to make it a combobox with a list of the Band_Names from the tblArtist table. This would make creating "a new project" much easier.
I have two combo boxes that contain data from one table.
table has two fields: Name and ID
cboName
cboID
I would like both combo boxes to update each other.
Example if start typing in the cboName box it fills in after update I would like the cboID to be updated with the correct value and vise versa if i start typing the ID in the cboID box when selected the cboName should be updated.
example table
ID NAME
1 joe
2 jane
3 mark
So if i type in or select 1 in the ID combo box it should put 'joe' in the Name combo box.
Or if i type in or select jane in the NAME combo box it should put '2' in the ID box.
I have read how to cascade combo boxes but that is not what i think i need.
I am using a Access 2010 web database.
I am using master/child form for data entry for packings and the details for this packings (i.e. the products inside a packing is entered in subform and packing master is entered in main form ).
In the detail subform i use a productId field which has look up from 1000 products , so i want to filter that particular combo box based on different types from product master ( from which it choses the products).
How many ways are there to filter that combo box based on different types ( which i have in product master as type,design,material etc).One way of which is combo boxes on main form.
[URL]
I have a couple forms with Combo boxes that look up data in queries. I noticed in testing that I could accidently type a "~" (and other characters) in the field and once I do, it causes a runtime error that shuts down the entire app (as opposed to letting the user backspace out of it or resetting the field). Before I put in some "Before Update" code to prevent the system from crashing, I want to make sure I am on the right track. I have already set the combo box to just show the list, not allow edits, limit to list, etc. Is there a way to prevent the user from doing this either by preventing the keyboard from working on combo boxes (not preferred) or by trapping it before the system crashes? I would think I could validate with a recordset, and create my own path out for the user, but I was hoping the combo box would have sort of done that work for me.
View 1 Replies View RelatedI have one field AccountName in customer table and another field AccountID.
In my form I would like to select from the combo box AccountName during data entry and then have the AccountID automatically update in the Account ID field.
I have a combo box that pulls account name data from tblAcctInfo. the combo box has an OnChange event which updates a textbox, txtAcctAddr.
when i have a new account that i would like to be listed in the combo box, i use a form, frmAcctAdd, to add a record to tblAcctInfo.
what i would like to do, is:
1) when i type a new value in the combo box that isn't in the list, have that string value pre-populate in the frmAcctAdd.
2) when i have added the new account info into frmAcctAdd and then saved the record, i would like the new value to pre-populate in the combo box, with the txtAcctAddr textbox also updated via the OnChange event (or maybe a different event is more appropriate?).
I have created a long version of this which requires a lot more user interaction (1-user typing in a new value into the combo box, 2-user RE-typing the SAME value into a data entry form, frmAcctAdd, 3-user saving the new record, 4-user re-clicking the combo box and selecting the newly added value) but i am trying to streamline the data entry with auto-populated fields.
I am working on creating an access database for tracking physical assets linked to locations. I need to make a combo box list to show items other than the current location of the asset. Basically I need it to refer to last enery of the user and define the new possible entries. so we have a unique relationship between location and asset. The assets and location will always remain fixed and there is never going to be any addition. I am creating a web form so that it can be uploaded into sharepoint.
View 3 Replies View RelatedI currently have 3 tables within a database with student details of three different classes. I need to create a user form that has a dropdown box which I can select a student from one of these tables with a number of text boxes below which brings up all the students details, then once the student has been selected and the correct details are shown then I need to create a button which allows me to move that student from one table to another.
View 4 Replies View Relatedthere is a way to convert multiple text boxes to combo boxes all at once, rather than right clicking on them one at a time, and selecting Change to.
I have a form with about 50 fields and most of them need to be converted to combo boxes. I'd always done it manually one at a time up to this point, but I'm trying to build up my learning and look for smarter ways to do things.
I am trying to make a search option in my form header. Right now I have two unbound combo boxes (CboAccountsfilter and cboCourseName) that I can use to filter my records. Currently, I can use the drop down for CboAccountsfilter and a list of accounts will appear. When I select one, the corresponding Course Names will appear in cboCourseName. This works fine...Code below. I would like to take the filtering a step farther and add checkboxes to filter the data. I my form, there currently exist several check boxes (yes/no)...(Priority, Rep Top Target, Manager Top Target, ect). I would like to have the option to use a check box to filter. I.E if I had a checkbox in my header called PriorityFilter, if checked it would only bring up those records that met the two combo boxes criteria and was a priority.
Below is the code I have so far...it doesnt have anything for the checkbox because I am at a lost of how to get started.
Private Sub CboAccountsfilter_Change()
Me.Requery
Me.cboCourseName.Requery
Me.Check178.Requery
End Sub
[code]...
I have a combo box in which I wish to show the Person_ID's of every record in the table TBL_Person, except those which are returned by a separate query. Is this possible at all?
View 1 Replies View RelatedIn the form frmOrders of my database i have a combobox where i can choose a ClientID and the dropdown list shows me all the clients in upgoing order with their related orders in descent order.But the drop down list doesn't show all available clients. The two hundred heighest clientnumbers aren shown. However if i type one of these clientnumbers in the textbox of the combobox, the client is found.If i go to the property sheet of the combobox and activate the query that serves as the recordsource of the combobox, all clients are shown!!!I control of the records of these clients in the table Orders, doesn't show any difference with all the other records.What can be the reason for these behaviour. Is it a question of a limit of records that can be shown via a combo box?
View 4 Replies View RelatedField B is a combo with the options of : 100% Availability, 75% Availability, 50% Availability, 25% Availability, OR Not Available
If I choose "Present" in Field A, I want the "Not Available" value to disappear as an option.
Hi guys,
I'm looking for a little bit of help here. I have a form and on this form I have a combo box. Now this combo box is populated by a table that I have called "Options". So this is all fine and dandy to select items already existing in the table, but ideally I would like to be able to input a new "Option" through this combo box if it doesn't exist in the table already.
I'm thinking I'd have to do something with the "On Not in List" event but I don't know VBA at all.
Also, I will eventually have a Price box next to this combo running off a query driven by the entry in the combo box. Again, I'd like to be able to input a new cost to the existing item or a cost for the newly entered item
Thanks in advance for the help
Nathan
I have several comboboxes (6) on my form.How to populate these comboboxes with values depending on selected value in previous combobox.
Example.Lets say that you select value "Audi" in combobox 1, then available values in combobox 2 should be "A4","A6","TT" etc. and if you selected "BMW" in combobox 1, then available values in combobox 2 should be "3-series", "5-series" etc...
Hey,
I have several list combo boxes on my form that I want to prevent users from adding data to. How can I do this? For example, there is a list box for insurance carrier, etc. :confused:
Thank you,
debo
I have a split design form, where user can select on any row and column of the spreadsheet view of the form and edit the data. Now, I want to write a code to limit the data addition(Row addition) to a certain number. But I still want to be able to edit the previous records added to the form.
I used Me.AllowAdditions = False, but when I want to select the previous records, it gives error:"You cannot go to specified record".
I know this is probably a basic question but I just need to clarify something.
I created a combo box using a wizard in a form that relies on its options by looking up data from a spefic table (Y) i.e. such as employee role. So far so good.
However when I create the field in the table in which the user response is stored in Table X, and I am specifying all the details in the general and lookup tab,
Do I:
A. store the data as text or
B. do I go to lookup tab --> display control --> combobox etc..?
We have a database where we are trying to limit the amount of data that users need to input.
We have a form, which contains order information. Where a customer has specific requirements, we add those requirements to a separate document review table MasterSpecification and DetailedSpecification.
When a customer has specific requirements, we can open the frmMasterSpecification and search for the document.
Assuming a review has been done the requirements will be shown on the subform Frmsubcoverage. I would like to be able to select the record source from this form and have the details entered into our order entry form.
Under the specification form there could be many sub coverage records depending on the type of item ordered to that specification.
I have created a form that searches through one of my tables, via a query, it then automatically creates a report from that query.
I want to add an option into the combo box's that is blank.
Currently if you wanted to choose by 'fault category' but accidently click on 'failure analysis', it will take the top value of the combo as the entry, you can't then blank 'failure analysis'.
Each combo box gets its information from an independent table.
The only think I figured out what adding the refresh button which just closes then reopens the form so all the fields go blank.
I have a field showing who equipment is being distributed to pulling data from my US Employee table. If I make it to only the last name from my lookup
(SELECT [US Employees].[Last Name], [US Employees].[First Name], [US Employees].[Dept] FROM [US Employees] ORDER BY [Last Name], [First Name], [Dept])
I can also view the equipment listed under the individual it is assigned to on a subform on my US Employee table. If I try to have the first and last name displayed on my Equipment table, however,
(SELECT [US Employees].[Last Name]&", "& [US Employees].[First Name], [US Employees].[Dept] FROM [US Employees] ORDER BY [Last Name], [First Name], [Dept]; )
it will not display under the individual on the US Employee table. Is there a way around this without having to combine the fields on the employee table or separate them on the equipment table?
Newbie Access user here, with what I hope is a fairly easy task--
I have a form which contains fields for info about clients and a subform which has only one field for a corresponding video tape number. Is there any way to limit the record for this subform to one single entry, so that when I hit Tab after entering the single number, the second record in the subform will not appear, but rather I can jump to the next record in the main form?
If not, then can I just tab through the main form, into the sub form and then onto the next record? Is there a shortcut to create the next record other than having to manually mouse click the next record arrow at the bottom of the form?