Forms :: Link 2 Subforms (1 To Many Relation) Within One Navigation Form?
Sep 2, 2013
Let's say :
1 navigation form called Nav_Main
2 subforms :
1 called master_form ( PK = id_master) (table : master_table)
1 called details_form (with id_master in it) (tables : details_table)
the relationship is still established
I want to switch from master_form to details_form and retrieve only records corresponding to the last id_master where I was in master_form
(do I absolutely need to recreate a parameter query of details_table ?) What is (are) the simple way(s) to do it ?
View Replies
ADVERTISEMENT
Jan 15, 2014
I have a complete working timeclock and trying to add the forms within the navigation form. I know I have to go back and re-reference everything and have already done so with the queries. But I cannot get the setfocus to work.
Here is the setup.
NavigationForm (navigation form)
frmClockIn (top form)
frmClockIn_SUB (bottom form)
Open Navigation > Time Clock.
Select an EmployeeID from the dropdown
Click on clock in. (successful)
cboEmployeID goes blank and try selecting the same employeeID to clock out and I get a debug at
Me.frmClockIn_SUB.SetFocus
I think there is a problem with my cboEmployeeID_AfterUpdate() as well.(related?) which used to be
Private Sub cboEmployeeID_AfterUpdate()
me.refresh
End Sub
I have replaced "me.refresh" with "Me.frmClockIn_SUB.Form.Refresh"
(It used to break here, but not after I changed it.)
Not too sure where to set these forms to in the code
I have attached a blank copy ....
View 3 Replies
View Related
Feb 4, 2006
I forum could someone tell me:
I have an unbound form on that form I want to put three sub forms one on a products table the other on a course start dates table and the link table that joins the other two together. all three are related to each other with Pk/FK links.
When I try to link them it says you cannot link items on an unbound form.
regards in advance
Peter:eek:
View 1 Replies
View Related
Sep 15, 2014
I have a navigation form with two tabs. One tab contains a subform for a technician to enter several part request. The other tab is for the parts room to edit and update the request.The issue i am having is i need the parts room form to be requeried every time the technician enters information on his tab.
I added a command button and tried
[NavigationSubform].Form![FRM New Request Part Room] .Requery
but it can't locate this form since it is in a separate tab.how do i do this?
View 1 Replies
View Related
Apr 9, 2015
I am building a user creation form. I have built it with 3 subforms
Subform 1 is voor general information about the user.
Subform 2 is some more specific information about the user
Subform 3 is more info about the same user.
Now when I create a user (record) in subform 1 it gets the primary key lets say 14. Then when i add information in subform 2. I want it to grab the Primary key 14 from subform 1. So that the information which is inputted in subform 2 will be related to information from subform 1. I get it working if I make a Main form and then put subform 2 and 3 in a subform and then let them grab the primary key from the main form. But how does this work with 3 subforms and no mainform.
View 3 Replies
View Related
Nov 15, 2014
I am not able to disable NavigationButton when i login navigation form using login form. I am using MS access 2007 - 2010.i am using below code but getting error.
Forms![Navigation Form]!NavigationButton13.enable = False
Error
Run-time error '438'
Object doesn't support this property or method.
Any other method to disable NavigationButton.
View 2 Replies
View Related
Jan 23, 2007
I am trying to create a database for a cub scout pack that just keeps scouts information, medical info, parents info, and parents medical info each is a seperate table. I have created a Tab controlled form with 4 tabs. On each tab the ONLY thing I have is a subform that contains the appropriate information. Each table has it's own form with the table as it's record source. I link the scouts table to the medical table by SID which is a primary key in the Scouts table. I link the Scouts table to the Parents table with a PID which is the Primary Key in my Parents table, and I link the Parents with the ParentsMed with a PMedID, key in the ParentsMed table.
Question #1 - Using a Tab Control you can only have 1 record source. What should I use? I have tried the tblScouts and I have also created a query with every field from every table.
#2 - When I try to use the parent and child links on the subform I get the error "Can't build a link between unbound forms" but each form is bound to the table and the record source on the tab control has had a table and my qryEverything, neither work. I can type in SID but it still doesn't function properly.
Any suggestions or comments on a better relationship method or any insight on how tab controls are supposed to be setup or anything would be greatly appreciated.
Thanks a lot
Rick
View 4 Replies
View Related
Apr 11, 2013
New to the navigation form: I need several forms in the navigation form to all relate to the same client ID field. I have this information on the main form but the form with in the navigation form will not pick it up.
I have tried =[Forms]![Frm Client Information Navigation Panel]![ClientID] But just cant get it to pick up that information...
I would like to have something like the master link fields and, child link fields but when I add a form to the navigation form this option in not available.
View 1 Replies
View Related
Jun 19, 2013
I am attempting to create a Navigation Form to allow another computer in my network to be able to utilize necessary forms within a database (through RunTime). I was hoping this would be a clean task by simply loading the forms into the tabs of the Navigation Form, however that is clearly not the case.
For starters, When attempting to use a form that has some VBA behind it (Docmd.ApplyFilter based on a selection from a combo box), I am given the error stating: "The action or method is invalid because the form or report isn't bound to a table or query."
After searching on this error, I believe it's because my Navigation Form does not have a record source. If this is the case, then I am confused as to what record source it should have, as with the 3 forms I need to access through the Navigation Form all pull data between various tables and queries within the database (some not related).
Now I've also come to the conclusion that my VBA references now must change in order to correctly use my forms. A correct reference would look something like:[Forms]![Navigation Form]![NavigationSubform].[Form].[My Form's Control]..Is this necessary in order to write any events, such as an AfterUpdate on a combo box?
View 4 Replies
View Related
May 3, 2013
I'm working on the Navigation Form template in Access 2010, which is new to me. It appears that one needs to use the BrowseTo command to open up a form in the built-in subform module. I'm trying to create a couple of buttons where each button opens a form in a different data mode; one in read-only and one in add mode. Here is the syntax I used for read-only:
DoCmd.BrowseTo acBrowseToForm, "frmSales","frmNavigation.NavigationSubform", , ,acFormReadOnly
frmSales is the Sales form I want both of the buttons to open and frmNavigation is the Navigation form. It seems to be ignoring the data mode part at the end however. It only will open in Edit mode. Is there something I'm doing wrong with this command?
View 3 Replies
View Related
Apr 11, 2013
I need a form with 2 subforms. the main form is for an indidual. the first subform is a list of characteristics. the second subform is sort of a calendar function, produced for date scheduled, results, next meeting date.
I have tried the form wizard, but it produces a jumble of the mixed fields. Can I create a subform or 2 before I create the main form, and then link them somehow?
View 6 Replies
View Related
Oct 24, 2014
I want to create a form with two subforms. I create a form with one subform without problems but i would like to know how i can link the two subforms, so when i select a row in first subform display records in second subform.
View 1 Replies
View Related
Oct 3, 2013
is it possible to have 3 subforms in a form?if so how would i go about this i have created the form and the 3 subforms however it only allows me to link one into the form.
View 7 Replies
View Related
Oct 28, 2013
I would like to know if it's possible to open an specific subform inside a navigation form using an event.
I also need to to this using macros ( really can't use vba in this project =/)
Form example:
the main form has "nav_opt1", "nav_opt2", "nav_opt3"
By double clicking a record in "nav_opt1", it will open "nav_opt2" with some filters (but all in the same window), as if I was just browsing through the navigation forms usually.
View 1 Replies
View Related
Feb 11, 2015
I have a Navigation form that has multiple forms that I linked to buttons at the top. They open the forms (now subforms) for the most part just fine. The issues come into play when I click on a combobox that pulls from a query of a table. Once this data is selected I have another combo box that is supposed to be filtered based off of the original combo box selection. Everything works on the original forms but once they are in subform form I get the error "Forms!MGM Search Form!STATE" which is the name of one of the forms and its asking for me to enter a parameter value for the query. Its almost like its not requerrying the data like it does in the original form
Private Sub State_AfterUpdate()
me.Facility.Requery
End Sub
basically the first combo box is a list of states and then the second combo box is a list of facilities in that state. Once you click on the state in the first combo box it filters the facilities in that state. But again once in the subform view it will not requery.
View 2 Replies
View Related
Dec 13, 2013
I'm attempting to create my first split database and I'm failing. Here is what I did in the exact steps.
1 - Created a database with one table and 11 forms (database is on my desktop).
2 - I created a split database and saved the back end on our company network.
3 - The front end is on my desktop(works fine)
4 - I put a copy of the front end on the company network (near the same location as the back end)
When I tried to open the front end from another persons computer who has access to the location i saved the back end and front end db's . It open fine, but my navigation form will not open the other forms. I get a blank sheet.
View 14 Replies
View Related
Nov 23, 2013
So I have made all the necessary forms to start working with my Access, and now I need a main form, a home where I should put all the buttons to enter each form.I have used the Navigation Control on a New form URL...
A row with buttons appeared, and I complete the property: Navigation Target Name with the target form, but it is giving me some trouble with a searchForm and a Query. Every time I enter this form (using nav control), Query asks for an Input.
View 2 Replies
View Related
Jun 11, 2013
I have used one of the members' code which was posted in a tread before to create a search box in a form. This code works perfectly when the form itself is open. Otherwise, when I put this searching form along with other forms in one navigation form, I get the following error: "Enter Parameter Value: Forms!FRM_SearchMulti!SrchText"...The code that was used for the Search box is as following:
Private Sub SearchFor_Change()
'Create a string (text) variable
Dim vSearchString As String
'Populate the string variable with the text entered in the Text Box SearchFor
vSearchString = SearchFor.Text
[code]....
View 7 Replies
View Related
Dec 6, 2013
I need to take data from a form with many sub-forms. The letter has to be in word to allow for edits. Its an appointment letter, however is has a table with 1-100 lines.I need to be able to add the name, address, date of appointment and table with however many lines are needed for that client.I can get the table to work by itself or the name, address and date of appointment but not both.
View 5 Replies
View Related
Jul 29, 2013
I am pretty new to access so i am using a very basic function structure to open a navigation form using if-then-else condition, Below is my VB coding:
Option Compare Database
Private intLogonAttempts As Integer
Private Sub Emp_Exit_Click()
DoCmd.Quit
End Sub
Private Sub EmpLogin_Click()
[Code] ....
I am getting an run time error '2467': "The Expression you entered refers to an object that is closed or doesn't exist"...
View 14 Replies
View Related
Jul 23, 2014
I have a form with a bottom that has a macro that uses applyfilter to filter the current form based on what is within a textbox located on the form.
I used the macobuilder and have my where condition as
[num] Like "*" & [Forms]![frm_Main]![Text181] & "*" Or [name] Like "*" & [Forms]![frm_Main]![Text181] & "*"
This works when I open the form by itself but when I try adding the form to a navigation form I get prompted to put in "num" and "[Forms]![frm_Main]![Text181] " etc. when I click the bottom.
View 5 Replies
View Related
Mar 15, 2013
I have decided to move away from Switchboard in Access 2010, to what I find to be more user-friendly; the Navigation Forms.
However, when I attempt to export any of the data from my navigation forms, the result is a blank Excel sheet. I can easily go into the forms themselves on the left navigation panel and export from there, but when myself or a user attempts to do this from the navigation forms themselves; well, the blank Excel sheet is the result.
How do you create a work-around, so that it is possible to export to Excel from these navigation forms?
I am fairly new to Access 2010.
View 14 Replies
View Related
Feb 12, 2014
I'm using Access 2010 and need to update a sub form in a form that is within a navigation form. So it goes:
Navigation Form > Main Form > Subform
How do I do this? I've attached the following to a click event of a cmd button but I just can't get it to work:
Forms!frmMain.NavigationSubform.Form.frmJobHeadSub Form.Requery
View 10 Replies
View Related
Sep 5, 2014
I need to execute some VBA to load a new form in my navigation view, not a popup form.
If use DoCmd.OpenForm "DB History" it opens the form as a new form.
DoCmd.BrowseTo acBrowseToForm, "DB History" set the focus on the DB History navigation button but doesn't open it.
So I think I need to add the path.
'DoCmd.BrowseTo ObjectType:=acBrowseToForm, ObjectName:="DB History", 'PathToSubformControl:="??"
This is where I am stuck.
My main form is Navigation Form1
The sub ins NavigationSubForm
and the form loaded is Form1 which I would like to replace with DB History
View 5 Replies
View Related
Nov 28, 2014
Can I use combo boxes placed in the detail area of a navigation form, above the sub menus but below the navigation? I am not able to get one to work properly . I can set it up but when I run the form, and try to pick an item from a list, it will not work...
View 2 Replies
View Related
Nov 4, 2014
I have three forms - Form1,Form2 and Form3 linked to a navigation form with Navigation buttons. I have separate VBA codes under each Before update event of these forms, Form1,Form2 and Form3 to call a VBA module to track the changes performed by the users(Like an Audit Trail) in specified fields of the forms which will track them to a table.there are control tags in the form properties --> others --> Tag to track the changes in the fields which are defined in the VBA Module.this is the code to call the VBA Module:
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Me.NewRecord Then
Call AuditChanges("UniqueID", "Part No", "NEW")
Else
Call AuditChanges("UniqueID", "Part No", "EDIT")
End If
End Sub
[code]....
The code is working perfect when the forms are run separately.but when they are run from the navigation form by clicking the navigation buttons, the code is not working !!
View 2 Replies
View Related
