How can I loop loop through a tabular form to clear each value in a field of all rows ? I tried the below code, but it did not work.
Loopcnt = DCount("*", "Budget")
For Loopcnt = 1 To Loopcnt
[Forms]![Budget Form].[Newbudgt] = Null
DoCmd.GoToRecord , , acNext
Next Loopcnt
I have a bound continuous tabular form,However, based on data content in one field of a record, I want a checkbox in the same record enabled, so the user can check it if necessary. I have created a record set using the form as shown below, and I am looping through each record. To show that my code is referring to the field with required data content, I display it as a message box and it works, yet my checkbox does not enable.
I have the code in the form_load event, however, for testing purposes I have it behind a button.If I am seeing this properly, the code behind the button enables the checkbox for ALL records once the criteria in the required field is true, and based on the last record, which has no data content, it disables the checkbox in ALL records. I also have the PK ID for each record hidden in the form. Can I utilize that to target the checkbox of each individual record??
Form Detail
-Form does not allow additions or deletions. Edits allowed
-All fields are disabled and locked
-I only want the check box to unlock if data is found in the "RequiredField" as referred to below. I have also tried if not isNull(requiredfield.value) then -enable checkbox, which yields the same results
Here is my code
Code:
Dim rstMyForm As DAO.Recordset
Set rstMyForm = Forms!MyForm.Form.Recordset
rstMyForm.MoveFirst
Do While Not rstMyForm.EOF
If Not RequiredField.Value = "" Then
[code]...
have this code:
Private Sub
Job_Number_BeforeUpdate(Cancel As Integer)
If
IsNull(DLookup("[Job Number]", "Job", "[Job Number]= " & Me.[Job Number]
& " ")) Then
MsgBox "Job Number doesn't exist Enter a job
number that already exist."
Me.[Job Number].Undo
Cancel = True
End If
End Sub
It is not clearing the Job Number Field, and also it is not letting me to close the form without entering the Job number that already exist. If I try to close the form without entering the job number it gives me run time error " syntax error (missing operator) query expression '[Job Number] = '."
I have a form with a subform. On the subform I have a field that has customer number in it, on the main form there is a field that will need to say "none" if the field with the customer number is empty, and empty if the customer number field is filled in. the field will not print out in the letter if there is no data on it.
the customer number comes from the table "CustomerNumbersData"
the the field that needs to be empty on the main folder comes from table "CustomerData"
I'm having trouble getting my form to be "blank" except for the labels upon loading. I've tried putting in some code "on load" but it doesn't clear everything. I haven't had this trouble on some of my other db's, the only difference here is it's a switchboard. I don't know if that matters.
View 1 Replies View RelatedI have a timesheet form that pulls from a query that pulls from a table I want to clear my daily charges and reset back to the default value of 0 when my form opens ...
Saturday, Sunday, Monday , Tuesday , Wednesday, Thursday, Friday
I have a tabular form that is based on a select statement (Query) in the source property. It filters & sorts from this select statement. permanently
I have just added a
Me.Filter = "[Form1].[InDate] = #" & MyValue & "# "
Me.OrderBy = "Indate DESC"
This all works fine, filters & sorts on the existing results.However this new filter & sort seems to remain no matter what I do.I have used every variation one me.filter ="" with Me.FilterOn = True, False & every combination.
Me.Filter="" & Me.FilterOn = False does initially seem to clear the lsit to show all records but as soon as type anything that filters the Form on the original, existing underlying select statement the extra Filter Property & Sort properties are occupied with the last filter/sort.
I have manually deleted any remaining Filter Or Sort properties direct from design view, saved, compacted & saved again.Once I use the new me.filter it will always returned as soon an any filter on the form is applied.I definately am not setting it again anywhere. Is there something better than me.filter ="", seen clearallfilters mentioned but not sure if this would apply just to the current form but reluctant to use a blanket clear as I do have quite a lot of other things going on.
Not sure when but many months (If not years) ago my form source stopped being a query and started using the query (sql) direct from the source property.I have left it this way as not sure if any consequence of moving back but don't remember how or how it happened. What are the pros cons of using a separate query.
I have a search form that's slightly modified search form modeled after the one available here on this site. It's a main form with a list box. I use the listbox to narrow down the results I want from the search function.
The search details are shown in a sub form that contains sub-sub forms
As seen in the code below, I am using the listbox to set a filter on the subform . Works famously until I search for something that does not exist in the database. I then receive runtime error 3075.
I believe it's related to the way I'm showing the details in the subform (by enabling a filter). If there is no record in the database that match the search criteria, I don't want any error messages or pop-ups and preferably would like the listbox to be blank.
Attached a screenshot of my form.
red = main form
green = subform
blue = sub-subforms
tan = obscuring the search results
Code:
Private Sub SearchFor_Change()
Dim vSearchString As String
vSearchString = SearchFor.Tex
SrchText.Value = vSearchString
Me.SearchResults.Requery
[Code] .....
I want to be able to clear all the contents in my fields (which are bound to my table) with a click of a button
View 1 Replies View RelatedIs it possible to clear filters set on a subform using a button on the main form?
View 1 Replies View RelatedI have an access forum that I need to have a textbox count how many rows have dates in my "Ship_To_Date_HP_" field
View 6 Replies View RelatedI have a main form, lets call it FrmMain. In addition, I have a subform on FrmMain that has a tab control on it (frmSubform). What I would like to do is on form load, reference the tab control that is on the subform, loop through the controls/textboxes, lock them and change their backcolor. The code I am attempting is listed below, however, I am getting a "type mismatch error" highlighting this line:
PHP Code:
Set Frm = Forms!frmConsultingMain!FrmConsultingFeeDataÂ
Below is my code:
PHP Code:
Dim ctl As ControlDim Frm As FormSet Frm = Forms!frmmain!FrmSubformFor Each ctl In Frm.Controls   Â
If (TypeName(ctl) = "Textbox" Or (TypeName(ctl) = "combobox") Or (TypeName(ctl) = "listbox")) Then       Â
ctl.Value = Null        ctl.BackColor = vbYellow        ctl.Locked = True    End IfNext ctlÂ
Im still struggling with working with recordsets.What i want to achieve is to loop through a continuous form recordset, Using the OrderDetailFK from the record set and the OrderDetailPK in the OrderDetail Table
Looking at the Status FK in the OrderDetail Table. IF the OrderDetail Status = 2 then i want to make the textbox enable property = False. I have made the bellow SQL string which is placing all the criteria i just need to link it into a recordset?
Code:
mySQL = "SELECT [StatusFK] FROM [tblOrderDetail] WHERE [OrderDetailPK] = " & rst!OrderDetailFK & " AND [StatusFK] = 2 "";"""
I'm building a simple access database to be used in a factory. It's pretty much there now, in the sense that it does all it needs to do, but some things feel a little "clunky". One of these things is the page where new products are created.
When a product is created the user has to specify what raw materials it's made up of and that works great, there is a continuous sub form that lets the user just add a row for every raw material. Having it as a continuous form makes sense as there can be lots of rows or just a few, so it's flexible.
Currently though the labour/time on that page works in the same way. But it feels a bit silly as there are only 3 sorts of labour (at least currently, they might add a couple more later). The labour types are..
- Build
- Finishing
- Handling
My question is, how would I go about turning the existing continuous row-by-row subform for labour into a single form that just listed those three types of labour (read from my labour type table)? So that it just shows a row that asks for quantity of each available labour type.
Not all products have all types of labour but it would be fine to write a 0 in the labour table for (for example) Finishing against a product that for example didn't need Finishing Labour. Obviously with the current continuous form approach no row would be written for Finishing if the user didn't select that.
I guess I could hardcode a single form to show the three current types, but ideally it would be flexible, coping with new labour types when the users find they need to add them.
I would like to make a form that can insert more than one row at one time. Something like add first column, then ask the user how many of the second row they would like, then prompt them for what is in the second row then add the information for the rest of the columns and have a separate row for each of the second column. So every row with have the same first column, but from there have a different row for how ever many desired in second column. So lets i enter for the first column, ABC, then I wanted 3 rows with ABC, then prompts me for the rest of the information for each of those rows separately.Something looking like this, oh and it would be updating an already existing table.
ABC|asdf|asdf|hgaf
ABC|hs|hasd|auio
ABC|JKL|ASE|ASDF
EDIT: I would also like to know if it is possible so it does it in ranges and dont have to do it manually like you enter the first column then enter a range for the second column and a bunch of rows are made with each value in between the range that was specified.
I have got a form with a couple of dlookups on it, when they return an error it pops the debug message up and if there is a value in the field already it just leaves that value there.
How can I suppress the message and clear the field and move on to the next line of code?
i have set up an update query. is there a way of looping through a continuous form record set and running the update on each line?
View 2 Replies View RelatedI have a form with field [Status]. When [Status] is set to "Will Attend" I can input the country of birth in field [Country_Birth]. My question is there something where if [Status] field is set back to null field [Country_Birth] will automatically clear?
View 2 Replies View RelatedI've seen code similar to below that clears all filters, but is it possible that instead of clearing all filters, I can clear just a specific one?
Private Sub cbGroup_Click()
Me.cboUnitName = Null
Me.cboGroup = Null
Me.tbl_users_subform.Form.Filter = ""
Me.tbl_users_subform.Form.FilterOn = False
Me.tbl_users_subform.Form.RecordSource = "tbl_users"
Me.tbl_users_subform.Requery
End Sub
I am using my form to add job descriptions and if the user checks the check box for current, it adds the description to the table as the current job description. I need to clear the check box for the next entry but the box retains the choice so when the user selects another description, the form saves it as current even if the box shows no check in the box. I tried the code below, but that only changes the state of the box, but not the reality of the state of the box.
Code:
Me.CheckBox.Value = No
The code pasted below creates a union query for a set of tables (J000171, J000174, J000178 etc) and stores the results of the query in a table called temp.
The first piece of code queries the ‘status’ field of a table rjobs for those records with a ‘status’ field of “Live”. Another field within this rjobs table, ‘JobID’, happens to be the name of a table where additional information relating to that job record is held eg. J000178 All of the tables selected in the query on rjobs are then included in the union query.
The second piece of code stores this information in a table called temp
I would like to be able to do 2 things with this;
1.add an additional field to the union query which holds the JobID field value from rjobs (or alternatively the table name from which the data originates eg J000178 etc as that is the same as the JobID file din rjobs)
2.create an option to clear the info in the temp table. Currently additional info is appended, so whenever the query is refreshed new data is simply added to old data. I would like to be able to clear that data where possible.
The union query is run from the on click of a command button on a simple form. Perhaps an additional button could be used to clear the records from the table temp.
Any ideas greatly appreciated.
Here is the existing code …
Option Compare Database
Option Explicit
Private Sub Command0_Click()
Dim db As Database
Dim rsRjobs As Recordset
Dim rsRapps As Recordset
Dim LengthofUnionSQL As Long
Dim sql As String
Dim UnionSQL As String
Set db = CurrentDb
Set rsRjobs = db.OpenRecordset("Select * from rjobs where Status = 'Live'", dbOpenSnapshot)
Do While Not rsRjobs.EOF
UnionSQL = UnionSQL & "Select ObjectID, SearchNo, DateSearched, Consultant, from " & rsRjobs!jobID & " Union "
rsRjobs.MoveNext
Loop
'following two lines are to remove the trailing word Union from the string unionsql
LengthofUnionSQL = Len(UnionSQL)
UnionSQL = Mid(UnionSQL, 1, LengthofUnionSQL - 7)
' Now variable Unionsql will hold the value something like
' Select ObjectID, SearchNo, DateSearched, Consultant from J000145
' Union Select ObjectID, SearchNo, DateSearched, Consultant from J000146
' Union Select ObjectID, SearchNo, DateSearched, Consultant from J000147
MsgBox UnionSQL
Set db = CurrentDb
Dim rsUnionquery As Recordset
Dim rstemp As Recordset
Set rstemp = db.OpenRecordset("temp", dbOpenDynaset, dbSeeChanges)
Set rsUnionquery = db.OpenRecordset(UnionSQL)
Do While Not rsUnionquery.EOF
rstemp.AddNew
rstemp!ObjectID = rsUnionquery!ObjectID
rstemp!SearchNo = rsUnionquery!SearchNo
rstemp!DateSearched = rsUnionquery!DateSearched
rstemp!Consultant = rsUnionquery!Consultant
rstemp!jobID = rsUnionquery!jobID
rstemp.Update
rsUnionquery.MoveNext
Loop
End Sub
I am working on form where the user selects either "IN" or "OUT" from a dropdown of field name "CheckOut" in Frm1.
If they select "OUT" they will in turn need to fill in 2 additional fields. When they change the value back from "OUT" to "IN",
I want those other fields to be cleared of data for just this record so next time they change back to "OUT" from "IN" those 2 additional fields are already blank.
Hi!!All,
I'm completely new to Access and would greatly appreciate your help in this problem.
I have a form name frmDataEntry with 10 fields, which enters data through an append query in Access. Firstly I was wondering whether I could do mutiple data entries, say 5 different entries of 10 fields each at the same time? Secondly, I wanted the form to clear all the entries after the user has submitted the data(I have made a submit button for this). I would greatly appreciate it if you could help me overcome these problems.
Thanks a lot,
Vakul
I already have a form where I can enter data.
In that form I would like to have different check-boxes (three of them), representing actions done that day.
Let's say each form represents a contact, and I need check-boxes for:
- Called
- E-mailed
- Visited
This is something I am now able to do. But.... I would like these check-boxes to be cleared automatically the next day.
So when the database is opened the next day, these check-boxes start unchecked.
And I would also like that as soon I check a check-box on a certain day, there is an entry for that action and date is being entered in the record of that contact, so I am able to check later on what day, what action was performed.
Im doing an attendance in Access database , i have a Staff table and AttendanceMain table for keep all the staff attendance ...
I also created a query to append the data into AttendanceMain table ... the problem is , I always reuse the staff name , so i created a Staff form , but everytime i open the staff form the previous record still there , anyway to clear the "Tick Box" in staff table and without affecting the name ?(Name also is a record in row by row)
Code:
Private Sub Check253_AfterUpdate()
Me.Text255 = Environ("UserName")
If Me.Check253 = -1 Then
Me.Text254 = DLookup("[Lot]", "[tblAutoGen]", "[Inuse] = -1")
Me.Text256 = DLookup("[Exp]", "[tblAutoGen]", "[Inuse] = -1")
Me.Text258 = DLookup("[Lot]", "[tblEthanol]", "[Inuse] = -1")
Me.Text260 = DLookup("[Exp]", "[tblEthanol]", "[Inuse] = -1")
Me.Text262 = DLookup("[Lot]", "[tblDPBS]", "[Inuse] = -1")
Me.Text264 = DLookup("[Exp]", "[tblDPBS]", "[Inuse] = -1")
Me.Text266 = DLookup("[Lot]", "[tblTE]", "[Inuse] = -1")
Me.Text268 = DLookup("[Exp]", "[tblTE]", "[Inuse] = -1")
Me.Text259.Value = Date
End If
End Sub
How do I clear the values in each textbox if check253 = 0 rather then going to each and clearing them?